Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 89
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Effects of bonding on the performance of optical fiber strain sensors

  • Floris, Ignazio
  • Sangiorgio, Valentino
  • Uva, Giuseppina
  • Rapido, Monica
  • Adam, Jose M|||0000-0002-9205-8458
  • Calderón García, Pedro Antonio|||0000-0002-9783-9333
  • Madrigal-Madrigal, Javier|||0000-0003-3156-1321
[EN] The structural health monitoring (SHM) of existing buildings, structures, and infrastructures has become increasingly important in recent years, while the interest of the scientific community is focused on the use of new high-performance technologies. Fiber optic sensors have become particularly attractive, thanks to their potential for monitoring strain in smart structures. The performance of this new technology depends to a large extent on the bonding technique used for its manufacture. Although the related literature has identified a correlation between some efficiency issues and the geometrical parameters of the bonding and mechanical properties of the materials adopted, the phenomenon is still not completely understood. This paper describes an in-depth study of the geometrical and mechanical parameters that influence the efficiency of optical fiber point sensors' surface bonding by synergistically related techniques such as computational simulation, experimental tests, sensor manufacturing, and data analysis. The paper's novelty is fourfold: (1) the investigation of the strain transfer mechanism of surface-bonded fiber optic sensors by considering, for the first time, all the parameters influencing the phenomenon through a considerable number of finite element (FE) analyses (117 three-dimensional FE models); (2) the development of a series of bonding efficiency predictive models; (3) the design of a specific laboratory test to validate the computational outcomes; and (4) the definition of useful guidelines for effective bonding manufacturing in order to maximize the performance of these sensors when acquiring monitoring data., Project Manufacturing Education and Training Governance Model; Universitat Politecnica de Valencia, Grant/Award Number: PAID-01-18; Spanish Ministry of Economy and Competitiveness, Grant/Award Number: DIMENSION TEC2017-88029-R; H2020 Marie SklodowskaCurie Actions, Grant/Award Number: 722509
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

High-voltage Sensor Based on Fiber Bragg Grating in Fibers with Electrodes

  • Pereira, J. M. B.
  • Hervás, J.
  • Laurell, F.
  • Tarasenko, O.
  • Margulis, W.
  • Sartiano, Demetrio
  • Barrera Vilar, David|||0000-0002-1700-6842
  • Madrigal-Madrigal, Javier|||0000-0003-3156-1321
  • Sales Maicas, Salvador|||0000-0001-9457-976X
[EN] This work describes the use of FBGs inscribed in optical fiber with electrodes for voltage sensing. The results show a quadratic voltage dependence. The device can be explored for a multipoint, single-ended voltage sensing device., The authors acknowledge financial support from the FINESSE project. FINESSE is funded by the European Union's Horizon 2020 research and innovation programme under the Marie Sklodowska - Curie grant agreement n° 722509. Partial funding from K. A. Wallenberg Foundation and the Swedish Science Council is gratefully acknowledged. We also thank Kenny Hey Tow (RISE, Sweden) for useful discussions.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Characterization and calibration of shape sensors based on multicore optical fibre

  • Idrisov, Ravil
  • Floris, Ignazio
  • Rothhardt, Manfred
  • Bartelt, Hartmut
[EN] In order to provide high accuracy in shape measurement with multicore optical fibres, characterization and calibration procedures are an important part of sensor preparation. Some procedures can be considered mandatory for adequate shape reconstruction, while others can help to enhance the measurement accuracy. Several of such procedures are discussed and experimentally applied for demonstrating the possible performance enhancement of curvature sensing, a fundamental phase of the shape reconstruction process. The maximum error observed in curvature calculation for a test object has been proved to be almost halved, decreasing from 2.48% to 1.36%, by applying such calibration corrections. The overall average relative accuracy of curvature measurement was improved from 0.89% to 0.5% (an improvement of 44%)., This work was performed within the framework of ITN-FINESSE, funded by the European Union¿s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie Action grant agreement no 722509.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Low Cost Plastic Optical Fiber Pressure Sensor Embedded in Mattress for Vital Signal Monitoring

  • Sartiano, Demetrio
  • Sales Maicas, Salvador|||0000-0001-9457-976X
[EN] The aim of this paper is to report the design of a low-cost plastic optical fiber (POF) pressure sensor, embedded in a mattress. We report the design of a multipoint sensor, a cheap alternative to the most common fiber sensors. The sensor is implemented using Arduino board, standard LEDs for optical communication in POF (¿ = 645 nm) and a silicon light sensor. The Super ESKA® plastic fibers were used to implement the fiber intensity sensor, arranged in a 4 × 4 matrix. During the breathing cycles, the force transmitted from the lungs to the thorax is in the order of tens of Newtons, and the respiration rate is of one breath every 2¿5 s (0.2¿0.5 Hz). The sensor has a resolution of force applied on a single point of 2.2¿4.5%/N on the normalized voltage output, and a bandwidth of 10 Hz, it is then suitable to monitor the respiration movements. Another issue to be addressed is the presence of hysteresis over load cycles. The sensor was loaded cyclically to estimate the drift of the system, and the hysteresis was found to be negligible., This research was supported by FINESSE project, funded by the European Union's Horizon 2020 research and innovation program under the Marie Sklodowska-Curie Action grant agreement No. 722509 and PROMETEO 2017/103 Tecnologias y Aplicaciones Futura de la Fotonica de Microondas.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Experimental study of the influence of FBG length on optical shape sensor performance

  • Floris, Ignazio
  • Madrigal-Madrigal, Javier|||0000-0003-3156-1321
  • Sales Maicas, Salvador|||0000-0001-9457-976X
  • Adam, Jose M|||0000-0002-9205-8458
  • Calderón García, Pedro Antonio|||0000-0002-9783-9333
[EN] This paper compares the performance of optical Multicore Fibres (MCFs) with inscribed Fibre Bragg Gratings (FBGs) used as curvature and shape sensors in relation to strain sensor length. Two fibre optic shape sensors, consisting of FBGs written in standard optical multicore fibre (diameter 124.5 mu m), were assembled in the Institute for Telecommunications and Multimedia Applications (iTEAM) of the Universitet Politecnica de Valencia. The optical sensors were then positioned on an aluminium mould and quasi-distributed curvature and shape sensing were performed to compare the accuracy of the arrays. It was found that the MCF shape sensor performance strongly depended on FBG length and that sensors based on long FBGs were significantly more accurate, showing that long FBGs can considerably improve shape sensor accuracy at equal grating densities and achieve substantially better performance. This is a great advantage when wavelength division multiplexing is used, when only a limited number of usable FBGs can be applied. These new results, applicable to both multiple single-core optical fibres and multicore optical fibres with embedded quasi-distributed strain sensors, show the connection between strain sensor length and accuracy, hardly taken into account in previous studies, and lay the foundation for the design of new long-FBG-based shape sensors., This work was carried out within the ITN-FINESSE framework, funded by the European Union's Horizon 2020 Research and Innovation Program under the Marie Sklodowska-Curie Action Grant Agreement no. 722509. It was also supported by the Spanish Ministry of Economy and Competitiveness within the DIMEN- SION TEC2017-88029-R. PROJECT
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Long Period Gratings in Multicore Optical Fibers for Directional Curvature Sensor Implementation

  • Barrera Vilar, David|||0000-0002-1700-6842
  • Madrigal-Madrigal, Javier|||0000-0003-3156-1321
  • Sales Maicas, Salvador|||0000-0001-9457-976X
[EN] Multicore optical fibers are especially attractive for the fabrication of curvature and shape sensors due to the spatial distribution of the different cores. Fiber Bragg gratings have been used in the past for the implementation of these sensors, however, despite their inherent properties, they have a very limited sensitivity. In this paper, we study the use of long period gratings (LPGs) for the implementation of a directional curvature sensor. We inscribed a set of three different LPGs in a seven core optical fiber using a selective inscription technique. We inscribed a single LPG in the external cores and an array of three LPGs in the central core. We have characterized the proposed sensor for strain, torsion, and curvature magnitude and direction. The proposed sensor shows a linear response for curvature magnitudes from 0 to 1.77 m(-1) with a maximum curvature sensitivity of -4.85 nm/m(-1) and shows a near sinusoidal behavior in all the cores with curvature directions from 0 degrees to 360 degrees. The sensor shows a good insensitivity to strain. The torsion in the multicore optical fibers can be detected and measured using the maximum attenuation of the LPGs in the external cores., This work was supported in part by the Sistema Nacional de Garantia Juvenil under Grant PEJ-2014-A-75865 (Promocion de Empleo Joven e Implantacion de la Garantia Juvenil 2014, MINECO), in part by the Ministry of Economy and Competitiveness under Project TEC2014-60378-C2-1-R, in part by the FINESSE the European Union's Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie Action Grant 722509, and in part by the Generalitat Valenciana under Grant APOSTD/2016/015.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Professional imprinting mechanisms in the doctoral trajectory: Impact on researcher identity diversity

  • Gruber, Marie
  • Crispeels, Thomas
  • Grinevich, Vadim
  • Deste Cukierman, Pablo
[EN] Shaping one's professional identity is a complex process that starts early on in the professional career and is influenced by many factors along the way. An important process in professional identity formation is professional imprinting. In socialization theory, professional imprinting refers to how individuals adjust behavior and beliefs to fulfill expectations from their working environments and achieve a feeling of belonging during sensitive periods. In this study, we turn to the academic setting, which is characterized by high researcher identity heterogeneity and thus can give us insights into the dynamics of professional identity development. Professional imprints during doctoral training lead to permanent characteristics in one's researcher identity. To investigate professional imprinting and its mechanisms, we conducted a qualitative study involving interviews with 16 PhD students and their supervisors (16 professors and 4 post-docs) within the setting of an EU-funded project. We identify the imprinting mechanisms that shape a researcher's identity during a sensitive period. Our study offers valuable insights for managers and policy makers about the role of supervisors or supervising managers in the development of the professional identities of junior colleagues and about the future career trajectories of people entering academia and industry., This study was conducted in the framework of ITN-FINESSE, funded by the European Union's Horizon 2020 research and innovation pro-gram under the Marie Sklodowska-Curie Action Grant Agreement 722509.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Sub-cm Temperature Monitoring of 500 Weak Gratings Array Through Chirped Ultra-Short Light Pulses

  • Sartiano, Demetrio
  • Madrigal-Madrigal, Javier|||0000-0003-3156-1321
  • Sales Maicas, Salvador|||0000-0001-9457-976X
[EN] We developed a temperature quasi-distributed sensing system interrogating a 500 weak fiber Bragg gratings (FBGs) array of 5 meters. It was possible to sense temperature changes down to 1°C with sub-centimeter spatial resolution., This research was supported by FINESSE project, funded by the European Union's Horizon 2020 research and innovation program under the Marie Sklodowska -Curie Action grant agreement n° 722509. It was also supported by the Ministry of Economy and Competitiveness project DIMENSION TEC2017 and by the Generalitat Valenciana project PROMETEO 2017/017.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Microwave Photonics Filtering Interrogation Technique Under Coherent Regime For Hot Spot Detection on a Weak FBGs Array

  • Hervás-Peralta, Javier
  • Barrera Vilar, David|||0000-0002-1700-6842
  • Madrigal-Madrigal, Javier|||0000-0003-3156-1321
  • Sales Maicas, Salvador|||0000-0001-9457-976X
[EN] An interrogation technique of cascaded FBG sensors based on a microwave photonics filtering technique under coherent regime is presented. The sensing information of a 5-m fiber coil containing 500 weak FBG with a similar central wavelength is retrieved. The FBGs are 9-mm long and the spatial separation between consecutive FBGs is 1 mm. The principle of operation is based on the calculation of the impulse response by recording the electrical frequency response of the system. Hot spot detection, location, and temperature measurement are demonstrated by experimental measurements with a temperature sensitivity of 0.6 dB/°C in a 10 °C range. Fifteen measurements are recorded in order to average them to reduce noise and smooth the saw tooth appearance typical of coherent measurements. The resolution of the proposed interrogation technique is related to the bandwidth of the electrical measurement. We have obtained a resolution of 20 cm for an electrical bandwidth of 1 GHz. The SNR was larger than 16 dB despite the fact that no amplification was used within the system., This work was supported in part by the Spanish MINECO under Project DIMENSION TEC2017-88029-R, in part by the Generalitat Valenciana (APOSTD/2016/015), in part by the FINESSE funded by the European Union's Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie Action under Grant 722509, in part by the Sistema Nacional de Garantia Juvenil under Grant PEJ-2014-A-24709, and in part by the MECD FPU scholarship under Grant FPU13/04675.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Monitoring temperature and vibration in a long weak grating array with short-pulse generation using a compact gain-switching laser diode module

  • Sartiano, Demetrio
  • Sales Maicas, Salvador|||0000-0001-9457-976X
[EN] Quasi-distributed temperature sensing and single point vibration sensing were performed. Ultrashort pulses generated by a gain-switching laser were used to interrogate a fiber Bragg gratings (FBG) array sensor. Temperature changes were measured down to 1 degrees C with sub-centimeter spatial resolution. The advantages of our fast interrogation setup were exploited, as the higher frequency limit of a dynamic measure that can be sensed is limited by the time needed to generate the optical pulse and to acquire the data from the sensor. The experimental approach described in this paper can sense mechanical vibrations up to a frequency of 245 kHz and a strain resolution as low as 1.2 mu epsilon., H2020 Marie Sklodowska-Curie Actions (MSCA-ITN-ETN-722509); Ministerio de Economia y Competitividad (DIMENSION TEC2017 88029-R); Generalitat Valenciana (PROMETEO 2017/103).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Twisting measurement and compensation of optical shape sensor based on spun multicore fiber

  • Floris, Ignazio
  • Madrigal-Madrigal, Javier|||0000-0003-3156-1321
  • Sales Maicas, Salvador|||0000-0001-9457-976X
  • Calderón García, Pedro Antonio|||0000-0002-9783-9333
  • Adam, Jose M|||0000-0002-9205-8458
[EN] This study presents a novel method for twisting compensation in optical shape sensing and first reports on twisting sensing by using Fiber Bragg Gratings (FBG) inscribed in a spun Multicore Fiber (MCF). A simple approach, based on Saint-Venant's Torsion Theory for homogeneous circular cylinders, was developed to calculate the fiber twisting from the longitudinal strain sensed in the cores and reconstruct three-dimensional shape taking into account and compensating the twisting, by enhancing the mathematical formulation of the previous approaches. Then, a 44 mm-long pre-twisted fiber optic shape sensor was produced in the Institute for Telecommunications and Multimedia Applications (iTEAM) of the UPV, by writing four FBGs in a spun multicore fiber (diameter of 125.1 mu m) with a pre-twisting of 64.9 rotation/meter. Finally, a series of experiments were performed to validate the method and evaluate the sensor performance. The outcomes of the experiments, perfectly in accordance with the theory, prove the elastic behavior of the sensor, even at high levels of deformation. Moreover, the proposed Spun-MCF-based Shape Sensor resulted able to measure twisting with a sensitivity of 0.23 pm/degrees and accuracy of 4.81 degrees within a wide dynamic range of +/- 270 degrees (+/- 6136.4 degrees/m). These new results can notably enhance the accuracy of fiber optic shape sensors and lead to the design of new fiber geometries and sensors. (C) 2020 Elsevier Ltd. All rights reserved., This work was carried out within the ITN-FINESSE framework, funded by the European Union's Horizon 2020 Research and Innovation Program under the Marie Sklodowska-Curie Action Grant Agreement N~ 722509. It was also supported by the Ministry of Economy and Competitiveness of Spain under DIMENSION TEC2017-88029-R.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Multicore optical fiber shape sensors suitable for use under gamma radiation

  • Barrera Vilar, David|||0000-0002-1700-6842
  • Madrigal-Madrigal, Javier|||0000-0003-3156-1321
  • Sales Maicas, Salvador|||0000-0001-9457-976X
  • Delepine-Lesoille, Sylvie
[EN] We have designed and implemented a fiber optic shape sensor for high-energy ionizing environments based on multicore optical fibers. We inscribed two fiber Bragg gratings arrays in a seven-core optical fiber. One of the arrays has been inscribed in a hydrogen-loaded fiber and the other one in an unloaded fiber in order to have two samples with very different radiation sensitivity. The two samples were coiled in a metallic circular structure and were exposed to gamma radiation. We have analyzed the permanent radiation effects. The radiation-induced Bragg wavelength shift (RI-BWS) in the hydrogen-loaded fiber is near ten times higher than the one observed for the unloaded fiber, with a maximum wavelength shift of 415 pm. However, the use of the multiple cores permits to make these sensors immune to RI-BWS obtaining a similar curvature error in both samples of approximately 1 cm without modifying the composition of the fiber, pre-irradiation or thermal treatment., Ministerio de Economia y Competitividad (DIMENSION TEC2017 88029- R); Generalitat Valenciana (IDI/FEDER/2018, PROMETEO 2017/103); H2020 Marie Sklodowska-Curie Actions (MSCA-ITN-ETN-722509); Universitat Politecnica de Valencia (PAID-01-18); Ministerio de Ciencia, Innovacion y Universidades (IJCI-2017-32476).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Tesis doctoral (DoctoralThesis)

Design of optical fiber sensors and interrogation schemes

  • Sartiano, Demetrio
[ES] Las fibras ópticas son dispositivos muy utilizados en el campo de las telecomunicaciones desde su descubrimiento. En las últimas décadas, las fibras ópticas comenzaron a utilizarse como sensores fotónicos. Los primeros trabajos se centraron en la medición de unas dimensiones físicas en un punto específico. Posteriormente, surgió la posibilidad de medir las propiedades de la fibra óptica en diferentes puntos a lo largo de la fibra. Este tipo de sensores se definen como sensores distribuidos. Los componentes optoelectrónicos fueron desarrollados e investigados para telecomunicaciones. Los avances en las telecomunicaciones hicieron posible el desarrollo de sistemas de interrogación para sensores de fibra óptica, creciendo en paralelo con los avances de las telecomunicaciones. Se desarrollaron sistemas de interrogación de fibra óptica que permiten el uso de una única fibra óptica monomodo estándar como sensor que puede monitorear decenas de miles de puntos de detección al mismo tiempo. Los métodos que extraen la información de detección de la señal reflejada en la fibra óptica son los más empleados debido a la facilidad de acceso al sensor y la flexibilidad de estos sistemas. Los más estudiados son la reflectometría en dominios de tiempo y frecuencia. La reflectometría óptica en el dominio del tiempo (OTDR) fue la primera técnica utilizada para detectar la posición de los fallos en las redes de comunica-ción de fibra óptica. El OTDR sensible a la fase hizo posible detectar la elongación y la temperatura en una posición específica. Paralelamente, los gratings de Bragg (FBG) se convirtieron en los dispositivos más utilizados para implementar sensores en fibra óptica discretos. Se desarrollaron técnicas de multiplexación para realizar la detección en múltiples puntos utilizando FGBs. La reflectometría realizada interrogando arrays de FBG débiles demuestra que mejora el rendimiento del sistema en comparación al uso de una fibra monomodo. Los sistemas de interrogatorio actuales tienen algunos inconvenientes. Algunos de ellos son velocidad de interrogatorio limitada, grandes dimensiones y alto costo. En esta tesis doctoral se desarrollaron nuevos sistemas de interrogación y sensores de fibra óptica para superar algunos de estos inconvenientes. Los sensores de fibra óptica de plástico demuestran ser una plataforma innovadora para desarrollar nuevos sensores y sistemas de interrogación de bajo costo y fáciles de implementar para fibras de plástico comerciales. Se investigó la reflectometría en el dominio del tiempo y las técnicas fotónicas de microondas para la interrogación de una matriz de rejillas débiles que permitieron simplificar el sistema de interrogación para la detección de temperatura y vibración., [CA] Les fibres òptiques són dispositius molt utilitzats en el camp de les telecomunica-cions des del seu descobriment. En les últimes dècades, les fibres òptiques van començar a utilitzar-se com a sensors fotònics. Els primers treballs es van centrar en el mesurament d'unes dimensions físiques en un punt específic. Posteriorment, va sorgir la possibilitat de mesurar les propietats de la fibra òptica en diferents punts al llarg de la fibra. Aquest tipus de sensors es defineixen com a sensors distribüits. Els components optoelectrònics van ser desenvolupats i investigats per a telecomunicacions. Els avanços en les telecomunicacions van fer possi-ble el desenvolupament de sistemes d'interrogació per a sensors de fibra òptica, creixent en paral·lel amb els avanços de les telecomunicacions. Es van desenvolupar sistemes d'interrogació de fibra òptica que permeten l'ús d'una única fibra òptica monomodo estàndard com a sensor que pot monitorar desenes de milers de punts de detecció al mateix temps. Els mètodes que extreuen la informació de detecció del senyal reflectit en la fibra òptica són els més utilitzats a causa de la facilitat d'accés al sensor i la flexibilitat d'aquests sistemes. Els més estudiats són la reflectometría en dominis de temps i freqüència. La reflectometría òptica en el domini del temps (OTDR) va ser la primera tècnica utilitzada per a detectar la posició de les fallades en les xarxes de comunicació de fibra òptica. El OTDR sensible a la fase va fer possible detectar l'elongació i la temperatura en una posició específica. Paral·lelament, els gratings de Bragg (FBG) es van convertir en els dispositius més utilitzats per a implementar sensors en fibra òptica discrets. Es van desenvolupar tècniques de multiplexació per a realitzar la detecció en múltiples punts utilitzant FGBs. La reflectometría realitzada interrogant arrays de FBG febles demostra que millora el rendiment del sistema en comparació a l'ús d'una fibra monomodo. Els sistemes d'interrogatori actuals tenen alguns inconvenients. Alguns d'ells són velocitat d'interrogatori limitada, voluminositat i alt cost. En aquesta tesi doctoral es van desenvolupar nous sistemes d'interrogació i sensors de fibra òptica per a superar alguns d'aquests inconvenients. Els sensors de fibra òptica de plàstic demostren ser una plataforma innovadora per a desenvolupar nous sensors i siste-mes d'interrogació de baix cost i fàcils d'implementar per a fibres de plàstic comercials. Es va investigar la reflectometría en el domini del temps i les tècniques fotòniques de microones per a la interrogació d'una matriu de reixetes febles que van permetre simplificar el sistema d'interrogació per a la detecció de temperatura i vibració., [EN] Optical fibers are devices largely used in telecommunication field since their discovery. In the last decades, optical fibers started to be used as photonic sensors. The first works were focused on the measurement of physical dimensions to a specific point. Afterward, emerged the possibility to measure the optical fiber properties at different locations along the fiber. These kinds of sensors are defined as distributed sensors. The optoelectronic components were developed and investigated for telecommunications. The progress in telecommunication made possible the development of optical fiber sensors interrogation systems, growing in parallel with the advances of telecommunications. Optical fiber interrogation systems were developed to use a single standard monomode optical fiber as a sensor that can monitor tens of thousands of sensing points at the same time. The methods that extract the sensing information from the backscattered signal in the optical fiber are widely employed because of the easiness of access to the sensor element and the flexibility of these systems. The most studied are the reflectometry in time and frequency domains. The optical time domain reflectometry (OTDR) was the first technique used to detect the position of the failures in the optical fiber communication networks. Using phase sensitive OTDR it is possible to sense strain and temperature at a specific position. In parallel, fiber Bragg gratings (FBGs) became the most widely used devices to implement discrete optical fiber sensors. Multiplexing techniques were developed to perform multi points sensing using these gratings. The reflectometry performed interrogating weak FBGs arrays demonstrate to improve the performance of the system employing a single mode fiber. The interrogation systems nowadays have some drawbacks. Some of them are limited speed of interrogation, bulkiness, and high cost. New interrogation systems and optical fiber sensors were developed in this doctoral thesis to overcome some of these drawbacks. Plastic optical fiber sensors demonstrate to be an innovative platform to develop both new sensors and low cost, easy to implement interrogation systems for commercial plastic fibers. Reflectometry in time domain and microwave photonic techniques were investigated for the interrogation of weak gratings array allowed to simplify the interrogation system for the sensing of temperature and vibration., I would like to greatly thank the European Union’s Horizon 2020 Research and Innovation Program that funded the research described in this thesis under the Marie Sklodowska-Curie Action Grant Agreement 722509.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Measurement uncertainty of multicore optical fiber sensors used to sense curvature and bending direction

  • Floris, Ignazio
  • Sales Maicas, Salvador|||0000-0001-9457-976X
  • Calderón García, Pedro Antonio|||0000-0002-9783-9333
  • Adam, Jose M|||0000-0002-9205-8458
[EN] This paper describes a study of the influence of strain measurement uncertainty on sensing curvature and bending direction, considering one of the most widely used fiber geometries for sensing applications (7-core Multicore Fiber) with different core spacings (distance between outer cores and fiber axis). The Monte Carlo method was proposed to simulate the real measurement process and 33 simulations with 106 iterations were performed to determine the laws of propagation of strain measurement uncertainty in calculating curvature and bending direction. The outcomes, which show the strong influence of strain uncertainty and core spacing on the precision of Multicore Fiber sensors, can be used to support the design of new sensors or new fiber geometry and to predict their achievable performance., This work was carried out within the ITN-FINESSE framework, funded by the European Union's Horizon 2020 Research and Innovation Program under the Marie Sklodowska-Curie Action Grant Agreement No 722509. It was also supported by the Ministry of Economy and Competitiveness of Spain under the project DIMENSION TEC-2017-88029-R.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Characterization of a FBG sensor interrogation system based on a mode-locked laser scheme

  • Madrigal-Madrigal, Javier|||0000-0003-3156-1321
  • Barrera Vilar, David|||0000-0002-1700-6842
  • Sales Maicas, Salvador|||0000-0001-9457-976X
  • Fraile-Pelaez, Francisco Javier
  • Zheng, Di
[EN] This paper is focused on the characterization of a fiber Bragg grating (FBG) sensor interrogation system based on a fiber ring laser with a semiconductor optical amplifier as the gain medium, and an in-loop electro-optical modulator. This system operates as a switchable active (pulsed) mode-locked laser. The operation principle of the system is explained theoretically and validated experimentally. The ability of the system to interrogate an array of different FBGs in wavelength and spatial domain is demonstrated. Simultaneously, the influence of several important parameters on the performance of the interrogation technique has been investigated. Specifically, the effects of the bandwidth and the reflectivity of the FBGs, the SOA gain, and the depth of the intensity modulation have been addressed. (C) 2017 Optical Society of America, This work has been partially supported by the Spanish MINECO through project TEC2014-60378-C2-1-R MEMES; the Generalitat Valenciana (APOSTD/2016/015), Sistema Nacional de Garantia Juvenil grant PEJ-2014-A-75865 (Promocion de Empleo Joven e Implantacion de la Garantia Juvenil 2014, MINECO); the Galician Regional Government under project GRC2015/018; the support of FINESSE the European Union's Horizon 2020 research and innovation programme under the Marie Sklodowska - Curie Action grant agreement no 722509; the National Natural Science Foundation of China (61405166) and the China Scholarship Council.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Temperature-insensitive optical tilt sensor based on a single eccentric-core fiber Bragg grating

  • Zheng, D.
  • Cai, Z.
  • Floris, Ignazio
  • Pan, W.
  • Zou, X.
  • Madrigal-Madrigal, Javier|||0000-0003-3156-1321
  • Sales Maicas, Salvador|||0000-0001-9457-976X
[EN] This Letter presents a simple temperature-insensitive optical tilt sensor based on a single eccentric-core fiber Bragg grating (ECFBG). By partly inserting an ECFBG into a ceramic ferrule, the reflection spectrum of the ECFBG splits into two peaks as a result of the applied tilt angle. The magnitude and direction of inclination in one dimension can be determined by monitoring the wavelength separation between both peaks, which is inherently insensitive to temperature. The proposed tilt sensor has a good linear response within a wide dynamic range of +/- 45 degrees, with a sensitivity of 0.012 nm/degrees, with a resolution of 0.83 degrees, and with an accuracy of 0.41 degrees. Being free from any inherent mechanical joint/friction, along with the advantages of a compact structure, good repeatability, and low cost, the proposed sensor is highly suitable for practical engineering applications. (C) 2019 Optical Society of America, National Natural Science Foundation of China (61405166, 61775185); Sichuan Province Science and Technology Support Program (2018HH0002); Higher Education Discipline Innovation Project (B18045); Ministerio de Economia y Competitividad (DIMENSION TEC2017 88029-R); Horizon 2020 Framework Programme (722509).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Bend-Direction and Rotation Plastic Optical Fiber Sensor

  • Sartiano, Demetrio
  • Sales Maicas, Salvador|||0000-0001-9457-976X
  • Geernaert, Thomas
  • Torres Roca, Elena
[EN] A plastic filament of poly (methyl methacrylate) (PMMA) was fabricated by extrusion. The mode confinement was simulated using numerical software. The idea is to study how the light intensity changes inside the plastic optical fiber (POF) when a bending in multiple directions is applied. The results obtained from the simulation were compared to the experimental observations. The non-circular shape of the POF allows sensing a rotation applied as well. The angle of rotation was obtained processing two images of the end facet of the fiber (one with the fiber in a reference position and one with the rotated fiber), using an intensity-based automatic image registration. The accuracy in the rotation calculation was of 0.01 degrees., FINESSE project, funded by the European Union's Horizon 2020 research and innovation program under the Marie Sklodowska-Curie Action grant agreement no 722509. Ministry of Economy and Competitiveness project DIMENSION TEC2017 and by the Generalitat Valenciana project PROMETEO 2017/017.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Effects of core position uncertainty on optical shape sensor accuracy

  • Floris, Ignazio
  • Calderón García, Pedro Antonio|||0000-0002-9783-9333
  • Sales Maicas, Salvador|||0000-0001-9457-976X
  • Adam, Jose M|||0000-0002-9205-8458
[EN] Optical fiber sensors are now widely recognized as extremely reliable instruments to sense strain. Optical shape sensors consist of multiple single-core optical fibers or multicore optical fibers capable of sensing bending direction and curvature by comparing the longitudinal strain of different cores in an instrumented section and reconstructing the sensor shape. This paper describes a study on the effects of core position errors on the precision of optical shape sensors when measuring strain, bending direction and curvature, and identifies the role of measured curvature and core spacing (distance between section center and external cores), considering 7, 4, and 3-core fiber geometries, three of those most widely employed for sensing applications. The Monte Carlo technique was utilized to reproduce the measurement process. Forty-five simulations, including 3.10(6) trials, were carried out for each geometry with the aim of investigating the law of uncertainty propagation. The results of the analysis, applicable to both multiple single-core fibers and multicore optical sensors equipped with distributed or quasi-distributed strain-sensors, show the effects of core position uncertainty and will be useful for new sensor designs and user options by predicting the achievable performance of these devices., This work was carried out within the ITN-FINESSE framework, funded by the European Union's Horizon 2020 Research and Innovation Program under the Marie Sklodowska-Curie Action Grant Agreement No 722509. It was also supported by the Ministry of Economy and Competitiveness of Spain under the project DIMENSION TEC2017-88029-R.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Fiber Optic Shape Sensors: A comprehensive review

  • Floris, Ignazio
  • Adam, Jose M|||0000-0002-9205-8458
  • Calderón García, Pedro Antonio|||0000-0002-9783-9333
  • Sales Maicas, Salvador|||0000-0001-9457-976X
[EN] Fiber Optic Shape Sensing is an innovative Optical Fiber Sensing Technology that uses a fiber optic cable to continuously track the 3D shape and position of a dynamic object (with unknown motion) in real-time without visual contact. This technology offers a valid alternative to existing shape sensing methods, thanks to a combination of advantages (including ease of installation, intrinsic safety, compactness, flexibility, electrically passive operation, resistance to harsh environments and corrosion, no need for proximity or computational or numerical models to reconstruct shape) that can bring remarkable improvements to the fields of Civil, Mechanical and Aerospace Engineering, Biomedicine and Medicine. A considerable research effort has been dedicated to this subject in the last twenty years. This paper presents an ambitious review of the current state of the art of Fiber Optic Shape Sensors (FOSS) based on Optical Multicore Fibers (MCF) or multiple optical single-core fibers with embedded strain sensors and provides a comprehensive analysis of a wide range of aspects, comprising: (1) existing alternative technologies; (2) an overview of optical fiber sensors (3) characteristics and advantages of fiber optic shape sensors; (4) historical achievements; (5) applications; (6) performance and error analysis; and (7) present and future perspectives., This work was carried out within the ITN-FINESSE framework, funded by the European Union's Horizon 2020 Research and Innovation Program under the Marie Sklodowska-Curie Action Grant Agreement N degrees 722509. It was also supported by the Ministry of Economy and Competitiveness of Spain under DIMENSION TEC2017-88029-R.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Contribución de congreso (ConferenceOutput)

Partially coated long period fiber Bragg gratings in multicore optical fibers

  • Barrera, David
  • Goicoechea Fernández, Javier
  • Madrigal, Javier
  • González Larequi, Marta
  • Arregui San Martín, Francisco Javier
  • Sales, Salvador
Multicore optical fibers (MCFs) have attracted considerable interest in the last years due to their potential in many applications including broadband communications, microwave photonics, and optical sensing [1,2]. In optical sensing, MCFs has been used in the past for implementing curvature and shape sensors [3]. However, the potential of MCFs for optical sensing is not limited to mechanical sensors and they can be used for implementing other types of sensors. In this paper, we investigate the use of MCFs for external refractive index (RI) sensing. We use LPGs inscribed in the cores of the fiber to detect changes in the external refractive index. Partially coating the surface of the optical fiber we can modify the sensitivity of the cores., This work was supported by the Ministry of Economy and Competitiveness under the projects DIMENSION TEC2017-88029-R and TEC2016-79367-C2-2-R (AEI/FEDER), the support of FINESSE the European Union¿s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie Action grant agreement n° 722509, and the support of the Generalitat Valenciana under the grant APOSTD/2016/015.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación

A Novel Fiber Optic Based Surveillance System for Prevention of Pipeline Integrity Threats

  • Tejedor, Javier
  • Macías-Guarasa, Javier
  • Martins, Hugo F.
  • Piote, Daniel
  • Pastor-Graells, Juan
  • Martín-López, Sonia
  • Corredera, Pedro
  • González-Herráez, Miguel
This paper presents a novel surveillance system aimed at the detection and classification of threats in the vicinity of a long gas pipeline. The sensing system is based on phase-sensitive optical time domain reflectometry (<i>ϕ</i>-OTDR) technology for signal acquisition and pattern recognition strategies for threat identification. The proposal incorporates contextual information at the feature level and applies a system combination strategy for pattern classification. The contextual information at the feature level is based on the tandem approach (using feature representations produced by discriminatively-trained multi-layer perceptrons) by employing feature vectors that spread different temporal contexts. The system combination strategy is based on a posterior combination of likelihoods computed from different pattern classification processes. The system operates in two different modes: (1) machine + activity identification, which recognizes the activity being carried out by a certain machine, and (2) threat detection, aimed at detecting threats no matter what the real activity being conducted is. In comparison with a previous system based on the same rigorous experimental setup, the results show that the system combination from the contextual feature information improves the results for each individual class in both operational modes, as well as the overall classification accuracy, with statistically-significant improvements., Some authors were supported by funding from the European Research Council through Starting Grant UFINE (Grant Number #307441), Water JPI, the WaterWorks2014 Co-funded Call, the European Commission (Horizon 2020) through Project H2020-MSCA-ITN-2016/722509-FINESSE, the Spanish Ministry of Economy and Competitivity, the Spanish “Plan Nacional de I+D+i” through Projects TEC2013-45265-R, TEC2015-71127-C2-2-R, TIN2013-47630-C2-1-R and TIN2016-75982-C2-1-R, and the regional program SINFOTONCM: S2013/MIT-2790, funded by the “Comunidad de Madrid”. H.F.M. acknowledges funding through the FP7 ITN ICONE program, Grant #608099 funded by the European Commission. J.P.-G. acknowledges funding from the Spanish Ministry of Economy and Competitivity through an FPI contract. S.M.-L. acknowledges funding from the Spanish Ministry of Science and Innovation through a “Ramón y Cajal” contract., We acknowledge support by the CSIC Open Access Publication Initiative through its Unit of Information Resources for Research (URICI).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Machine Learning Methods for Pipeline Surveillance Systems Based on Distributed Acoustic Sensing: A Review

  • Tejedor, Javier
  • Macías-Guarasa, Javier
  • Martins, Hugo F.
  • Pastor-Graells, Juan
  • Corredera, Pedro
  • Martín-López, Sonia
There is an increasing interest in researchers and companies on the combination of Distributed Acoustic Sensing (DAS) and a Pattern Recognition System (PRS) to detect and classify potentially dangerous events that occur in areas above fiber optic cables deployed along active pipelines, aiming to construct pipeline surveillance systems. This paper presents a review of the literature in what respect to machine learning techniques applied to pipeline surveillance systems based on DAS+PRS (although its scope can also be extended to any other environment in which DAS+PRS strategies are to be used). To do so, we describe the fundamentals of the machine learning approaches when applied to DAS systems, and also do a detailed literature review of the main contributions on this topic. Additionally, this paper addresses the most common issues related to real field deployment and evaluation of DAS+PRS for pipeline threat monitoring, and intends to provide useful insights and recommendations in what respect to the design of such systems. The literature review concludes that a real field deployment of a PRS based on DAS technology is still a challenging area of research, far from being fully solved., Some authors were supported by funding from the European Research Council through Starting Grant UFINE (grant number #307441), Water JPI, the WaterWorks2014 Cofunded Call, the European Commission (Horizon 2020) through project H2020-MSCA-ITN-2016/722509-FINESSE, the Spanish Ministry of Economy and Competitiveness, the Spanish “Plan Nacional de I+D+i” through projects TEC2013-45265-R, TEC2015-71127-C2-2-R, TIN2013-47630-C2-1-R, and TIN2016-75982-C2-1-R, and the regional program SINFOTONCM: S2013/MIT-2790 funded by the “Comunidad de Madrid”. H.F.M. acknowledges funding through the FP7 ITN ICONE program, grant number #608099 funded by the European Commission. J.P.-G. acknowledges funding from the Spanish Ministry of Economy and Competivity through an FPI contract. SML acknowledges funding from the Spanish Ministry of Science and Innovation through a “Ramón y Cajal” contract., We acknowledge support by the CSIC Open Access Publication Initiative through its Unit of Information Resources for Research (URICI).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Towards detection of pipeline integrity threats using a SmarT fiber-OPtic surveillance system: PIT-STOP project blind field test results

  • Tejedor, J.
  • Macías-Guarasa, Javier
  • Martins, Hugo F.
  • Piote, Daniel
  • Pastor-Graells, Juan
  • Martín-López, Sonia
  • Corredera, Pedro
  • Pauw, G. de
  • Smet, F. de
  • Postvoll, W.
  • Ahien, C. H.
  • González-Herráez, Miguel
4 pags., 1 fig., 1 tab., This paper presents the first report on on-line and final blind field test results of a pipeline integrity threat surveillance system. The system integrates a machine+activity identification mode, and a threat detection mode. Two different pipeline sections were selected for the blind tests: One close to the sensor position, and the other 35 km away from it. Results of the machine+activity identification mode showed that about 46% of the times the machine, the activity or both were correctly identified. For the threat detection mode, 8 out of 10 threats were correctly detected, with 1 false alarm., This work was mainly supported by three GERG partners (Fluxys, Statoil, and Gassco) under project PIT-STOP, and was also supported in part by: the European Research Council through project UFINE (Grant #307441); the EC Horizon 2020 program through the FINESSE project MSCA-ITN-ETN-722509; the DOMINO Water JPI project, under the WaterWorks2014 cofounded call by EC Horizon 2020 and Spanish MINECO; the Spanish MINECO through projects TEC2013-45265-R, TEC2015-71127-C2-2-R, and TIN2013-47630-C2-1-R; and the regional program SINFOTON-CM: S2013/MIT-2790. The work of HFM was supported by EU funding through the FP7 ITN ICONE program (Grant #608099). The work of JPG and SML was supported by the Spanish MINECO through FPI and \Ramón y Cajal> contract, respectively., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Distributed acoustic sensing using chirped-pulse phase-sensitive OTDR technology

  • Fernández-Ruiz, María R.
  • Costa, Luis
  • Martins, Hugo F.
In 2016, a novel interrogation technique for phase-sensitive (Φ)OTDR was mathematically formalized and experimentally demonstrated, based on the use of a chirped-pulse as a probe, in an otherwise direct-detection-based standard setup: chirped-pulse (CP-)ΦOTDR. Despite its short lifetime, this methodology has now become a reference for distributed acoustic sensing (DAS) due to its valuable advantages with respect to conventional (i.e., coherent-detection or frequency sweeping-based) interrogation strategies. Presenting intrinsic immunity to fading points and using direct detection, CP-ΦOTDR presents reliable high sensitivity measurements while keeping the cost and complexity of the setup bounded. Numerous technique analyses and contributions to study/improve its performance have been recently published, leading to a solid, highly competitive and extraordinarily simple method for distributed fibre sensing. The interesting sensing features achieved in these last years CP-ΦOTDR have motivated the use of this technology in diverse applications, such as seismology or civil engineering (monitoring of pipelines, train rails, etc.). Besides, new areas of application of this distributed sensor have been explored, based on distributed chemical (refractive index) and temperature-based transducer sensors. In this review, the principle of operation of CP-ΦOTDR is revisited, highlighting the particular performance characteristics of the technique and offering a comparison with alternative distributed sensing methods (with focus on coherent-detection-based ΦOTDR). The sensor is also characterized for operation in up to 100 km with a low cost-setup, showing performances close to the attainable limits for a given set of signal parameters [≈tens-hundreds of pe/sqrt(Hz)]. The areas of application of this sensing technology employed so far are briefly outlined in order to frame the technology., This work was supported by project FINESSE MSCA-ITN-ETN-722509; the DOMINO Water JPI project under the WaterWorks2014 cofounded call by EC Horizon 2020 and Spanish MINECO; Comunidad de Madrid and FEDER Program under grant SINFOTON2-CM: P2018/NMT-4326; the Spanish Government under projects TEC2015-71127-C2-2-R and RTI2018-097957-B-C31. M.R.F.M and H.F.M. acknowledge financial support from the Spanish MICINN under contracts no. FJCI-2016-27881 and IJCI-2017-33856, respectively., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Distributed detection of hydrogen and deuterium diffusion into a single-mode optical fiber with chirped-pulse phase-sensitive optical time-domain reflectometry

  • García-Ruiz, A.
  • Morana, A.
  • Costa, L.
  • Martins, Hugo F.
  • Martín-López, Sonia
  • González-Herráez, Miguel
  • Boukenter, A.
  • Ouerdane, Y.
  • Girard, S.
4 pags., 3 figs., For some infrastructures such as oil and gas extraction boreholes or radioactive waste repositories, where distributed optical fiber sensors are employed to grant the safety of the facilities, the presence of gas species such as hydrogen or deuterium is one of the most relevant parameters to monitor. The possibility of employing the same kind of sensors for this purpose is of special interest, reducing the cost by employing a single interrogator, able to measure multiple parameters by simply employing adequate sensing fibers. To meet this goal, we present here a chemical sensor based on chirped-pulse phase-sensitive optical time-domain reflectometry (CP-φOTDR), which is able to detect these species while they diffuse into the silica fiber. The ability of chirped-pulse φOTDR to measure a change in refractive index with sensitivity around 10 has allowed determining hydrogen concentration with accuracy on the order of 10− mol∕m and spatial resolution ∼6 m. Another experiment provides an indirect measurement of the solubility of deuterium in a standard telecom-grade optical fiber, which is found to be around 1.47 × 10 m∕bar., European Commission (FINESSE, MSCA-ITNETN-722509); Ministerio de Ciencia, Innovación y Universidades (IJCI-2017-33856, RTI2018-097957-B-C31); Comunidad de Madrid and FEDER program (SINFOTON2-CM: P2018/NMT-4326); Universidad de Alcalá (FPI).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Distributed sensing of microseisms and teleseisms with submarine dark fibers

  • Williams, Ethan F.
  • Fernández-Ruiz, María R.
  • Magalhães, Regina
  • Vanthillo, R.
  • Zhan, Zhongwen
  • González-Herráez, Miguel
  • Martins, Hugo F.
11 pags., 9 figs.-- Open Access funded by Creative Commons Atribution Licence 3.0, Sparse seismic instrumentation in the oceans limits our understanding of deep Earth dynamics and submarine earthquakes. Distributed acoustic sensing (DAS), an emerging technology that converts optical fiber to seismic sensors, allows us to leverage pre-existing submarine telecommunication cables for seismic monitoring. Here we report observations of microseism, local surface gravity waves, and a teleseismic earthquake along a 4192-sensor ocean-bottom DAS array offshore Belgium. We observe in-situ how opposing groups of ocean surface gravity waves generate double-frequency seismic Scholte waves, as described by the Longuet-Higgins theory of microseism generation. We also extract P- and S-wave phases from the 2018-08-19 M8.2 Fiji deep earthquake in the 0.01-1 Hz frequency band, though waveform fidelity is low at high frequencies. These results suggest significant potential of DAS in next-generation submarine seismic networks., This work was supported in part by the members of the Space Innovation Council at Caltech, the Caltech-JPL President’s and Director’s Research and Development Fund (PDRDF), the DOMINO Water JPI project under the Water Works 2014 cofounded call by EC Horizon 2020 and Spanish MINECO, and the regional program SINFOTON2-CM: P2018/NMT-4326. E.F.W. was supported by an NSF Graduate Research Fellowship. M.R.F.-R. and H.F.M. acknowledge financial support from the Spanish Ministerio de Ciencia, Innovación y Universidades (MICINN) under contract nos. FJCI-2016-27881 and IJCI-2017-33856, respectively. R.M. acknowledges financial support from the EU’s Horizon 2020 research and innovation program under the Marie Sklodowska-Curie Action grant agreement no. 722509EU (ITN-FINESSE). Z.Z. acknowledges support under NSF CAREER Award 1848166. M.G.-H. acknowledges funding from the Spanish MINECO through projects TEC2015-71127-C2-2-R and RTI2018-097957-B-C31.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Dynamic Measurements of 1000 Microstrains Using Chirped-Pulse Phase-Sensitive Optical Time-Domain Reflectometry

  • Datta Bhatta, Hari
  • Costa, Luis
  • García-Ruiz, A.
  • Fernández-Ruiz, María R.
  • Martins, Hugo F.
  • Tur, Moshe
  • González-Herráez, Miguel
8 pags., 6 figs., -- Open Access funded by Creative Commons Atribution Licence 4.0, This paper extends the capabilities of chirped-pulse phase-sensitive optical time-domain reflectometry to the measurement of large dynamic strains over hundreds of meters of standard single-mode fiber. Benefitting from single-shot strain measurements, this technique has already demonstrated dynamic strains of the order of submicrostrains with a sensitivity of picostrains-per-root-Hertz. Yet, for large dynamic strains, it relies on the accumulation of incremental measurements, where each trace is cross correlated with its predecessor to determine the relative change of strain. However, practical time records of measured high slew-rate applied perturbations contain disturbing outliers. We then detail and analyze a post-processing strategy to mitigate this limitation. Through this strategy, we are able to achieve for the first time (to our knowledge) high signal-to-noise Rayleigh-backscattering-based distributed measurements of large and fast dynamic strains of a longitudinally vibrating 4 m section at the end of 210 m of a single-mode fiber: from peak to peak 150-1190 ¿¿ at vibration frequency of 400 Hz and 50 Hz, respectively., The work of H. D. Bhatta was performed in the framework of ITN-FINESSE, funded by the European Union’s Horizon 2020 research and innovation program under the Marie Sklodowska-Curie Action grant agreement n.° 722509. Additional support was obtained from EC H2020 (project DOMINO, ERANET Cofund Water Works 2014 call) and Spanish MINECO (project DOMINO, project TEC2015-71127-C2-2-R and project RTI2018- 097957-B-C31), UAH (FPI contract) and Regional Program SINFOTON2-CM: P2018/NMT-4326. (Corresponding author: Hari Datta Bhatta.)
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Fully Distributed Optical Fiber Strain Sensor With 10−12 ϵ/√Hz Sensitivity

  • Costa, Luis
  • Martins, Hugo F.
  • Martín-López, Sonia
  • Fernández-Ruiz, María R.
  • González-Herráez, Miguel
9 pags., 8 figs., Advanced optical fiber reflectometry techniques enable spatially distributed measurements of true relative deformations over the length of a conventional optical fiber cable. This methodology is attractive for many applications ranging from intrusion monitoring to seismology. However, accurate quantification of the applied stimulus in general implies sophisticated implementations with poor sensitivity performance. Coherent reflectometry using chirped pulses is an appealing solution, as it provides fast dynamic strain measurements with a simple experimental deployment. Here, we analyze for the first time to our knowledge the lower performance bounds of this technique as a function of the signal-to-noise ratio of the acquired optical signal. We demonstrate that implementations realized so far have been limited by the temporal sampling used instead of the optical signal quality. Through post-processing interpolation approaches, we reach the performance limit for a given set of signal parameters, attaining unprecedented strain sensitivities (10 -12 ¿/¿Hz) for km-length distributed sensors in conventional single-mode fibers., This work was supported in part by The European Research Council through project U-FINE under Grant 307441; in part by ITNFINESSE, funded by the European Union’s Horizon 2020 research and innovation program under the Marie-Sklodowska-Curie Action Grant n° 722509; in part by the DOMINO Water JPI project, under the WaterWorks2014 cofounded call by EC Horizon 2020 and Spanish MINECO PCIN-2015-219; in part by the Spanish MINECO through the Project TEC2015-71127-C2-2-R; and in part by the regional program SINFOTON-CM: S2013/MIT-2790. The work of L. Costa was supported by EU funding through the project MSCA-ITN-ETN-722509. The work of S. Martín-López and M. R. Fernández-Ruiz was supported by the Spanish MINECO through a “Ramón y Cajal” and “Juan de la Cierva” contracts, respectively. (Corresponding author: Luis Costa.)
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

High-fidelity distributed acoustic sensing using optical fibers: a new tool in Geophysics

  • Fernández-Ruiz, María R.
  • Martins-López, Sonia
  • González-Herráez, Miguel
  • Martins, Hugo F.
Cancún, Quintana Roo, México, September 23-27, 2019., The possibility of using a pre-existent fiber optic network as Earth’s nervous system to monitor deformations with high sensitivity across the world in real time is overviewed. The potential and results on the use of distributed acoustic sensing (DAS) as a tool for seismology are discussed, with emphasis on the recent technology of chirped-pulse DAS., This work was supported by project FINESSE MSCA-ITN-ETN-722509; the DOMINO Water JPI project under the WaterWorks2014 cofounded call by EC Horizon 2020 and Spanish MINECO; Comunidad de Madrid and FEDER Program under grant SINFOTON2-CM: P2018/NMT-4326; project TEC2015-71127-C2-2-R. M.R.F.M and H.F.M. acknowledge financial support from the Spanish Ministerio de Ciencia, Innovación y Universidades (CIENCIA) under contracts no. FJCI-2016-27881 and IJCI-2017-33856, respectively
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Towards Distributed Measurements of Electric Fields Using Optical Fibers: Proposal and Proof-Of-Concept Experiment

  • Magalhães, Regina
  • Pereira, Joao
  • Tarasenko, Oleksandr
  • Martín-López, Sonia
  • González-Herráez, Miguel
  • Margulis, Walter
  • Martins, Hugo F.
© 2020 by the authors., Nowadays there is an increasing demand for the cost-effective monitoring of potential threats to the integrity of high-voltage networks and electric power infrastructures. Optical fiber sensors are a particularly interesting solution for applications in these environments, due to their low cost and positive intrinsic features, including small size and weight, dielectric properties, and invulnerability to electromagnetic interference (EMI). However, due precisely to their intrinsic EMI-immune nature, the development of a distributed optical fiber sensing solution for the detection of partial discharges and external electrical fields is in principle very challenging. Here, we propose a method to exploit the third-order and second-order nonlinear effects in silica fibers, as a means to achieve highly sensitive distributed measurements of external electrical fields in real time. By monitoring the electric-field-induced variations in the refractive index using a highly sensitive Rayleigh-based CP-φOTDR scheme, we demonstrate the distributed detection of Kerr and Pockels electro-optic effects, and how those can assign a new sensing dimension to optical fibers, transducing external electric fields into visible minute disturbances in the guided light. The proposed sensing configuration, electro-optical time domain reflectometry, is validated both theoretically and experimentally, showing experimental second-order and third-order nonlinear coefficients, respectively, of χ(2) ~ 0.27 × 10−12 m/V and χ(3) ~ 2.5 × 10−22 m2/V2 for silica fibers., This work was partly supported by: the European Commission (FINESSE, MSCA-ITN-ETN-722509); Spanish Ministerio de Ciencia, Innovación y Universidades (RTI2018-097957-B-C31, RTI2018-097957-B-C33); Comunidad de Madrid and FEDER program (SINFOTON2-CM: P2018/NMT-4326); the European Research Council (OCEAN-DAS: ERC-2019-POC-875302). The work of HFM was supported by the Spanish MINECO (“Juan de la Cierva” postdoc contract IJCI-2017-33856)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Distributed acoustic sensing for seismic activity monitoring

  • Fernández-Ruiz, María R.
  • Soto, Marcelo A.
  • Williams, Ethan F.
  • Martín-López, Sonia
  • Zhan, Zhongwen
  • González-Herráez, Miguel
  • Martins, Hugo F.
17 pags., 12 figs., Continuous, real-time monitoring of surface seismic activity around the globe is of great interest for acquiring new insight into global tomography analyses and for recognition of seismic patterns leading to potentially hazardous situations. The already-existing telecommunication fiber optic network arises as an ideal solution for this application, owing to its ubiquity and the capacity of optical fibers to perform distributed, highly sensitive monitoring of vibrations at relatively low cost (ultra-high density of point sensors available with minimal deployment of new equipment). This perspective article discusses early approaches on the application of fiber-optic distributed acoustic sensors (DASs) for seismic activity monitoring. The benefits and potential impact of DAS technology in these kinds of applications are here illustrated with new experimental results on teleseism monitoring based on a specific approach: the so-called chirped-pulse DAS. This technology offers promising prospects for the field of seismic tomography due to its appealing properties in terms of simplicity, consistent sensitivity across sensing channels, and robustness. Furthermore, we also report on several signal processing techniques readily applicable to chirped-pulse DAS recordings for extracting relevant seismic information from ambient acoustic noise. The outcome presented here may serve as a foundation for a novel conception for ubiquitous seismic monitoring with minimal investment., This work was supported by the project FINESSE, Grant No. MSCA-ITN-ETN-722509; the DOMINO Water JPI project under the WaterWorks2014 cofounded call by EC Horizon 2020 and Spanish MINECO; the Comunidad de Madrid and FEDER Program under Grant No. SINFOTON2-CM: P2018/NMT-4326; the Spanish Government under Project Nos. TEC2015-71127-C2-2-R, RTI2018- 097957-B-C31, and RTI2018-097957-B-C33. M.R.F.M. and H.F.M. acknowledge financial support from the Spanish MICINN under Contract Nos. FJCI-2016-27881 and IJCI-2017-33856, respectively. M.A.S. acknowledges AC3E Basal Project No. FB0008 and thanks “Becas Iberoamérica Santander Universidades Convocatoria 2018” for supporting his research stay at the Universidad de Alcalá, Spain.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Fast and direct measurement of the linear birefringence profile in standard single-mode optical fibers

  • Costa, Luis
  • Magalhães, Regina
  • Palmieri, Luca
  • Martins, Hugo F.
  • Martín-López, Sonia
  • Fernández-Ruiz, María R.
  • González-Herráez, Miguel
4 pags., 4 figs., 1 tab., Phase birefringence in optical fibers typically fluctuates over their length due to geometrical imperfections induced from the drawing process or during installation. Currently commercially available fibers exhibit remarkably low birefringence, prompting a high standard for characterization methods. In this work, we detail a method that uses chirped-pulse phase-sensitive optical time-domain reflectometry to directly measure position-resolved linear birefringence of single-mode optical fibers. The technique is suitable for fiber characterization over lengths of tens of kilometers, relying on a fast measurement (∼1 s) with single-ended access to the fiber. The proposed method is experimentally validated with three different commercial single-mode optical fibers., Ministerio de Economía y Competitividad (TEC 2015-71127-C2-2-R); Ministerio de Ciencia, Innovación y Universidades (FJCI-2016-27881, IJCI-2017-33856, RTI 2018-097957-B-C31); Comunidad de Madrid (SINFO TON2-CM:P2018/NMT-4326); European Commission (PCIN-2015-219 DOMINO,MSCA-ITN-ETN-722509).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Long-range distributed solar irradiance sensing using optical fibers

  • Magalhães, Regina
  • Costa, Luis
  • Martín-López, Sonia
  • González-Herráez, Miguel
  • Braña, Alejandro F.
  • Martins, Hugo F.
15 pags., 9 figs., Until recently, the amount of solar irradiance reaching the Earth surface was considered to be a steady value over the years. However, there is increasing observational evidence showing that this quantity undergoes substantial variations over time, which need to be addressed in different scenarios ranging from climate change to solar energy applications. With the growing interest in developing solar energy technology with enhanced efficiency and optimized management, the monitoring of solar irradiance at the ground level is now considered to be a fundamental input in the pursuit of that goal. Here, we propose the first fiber-based distributed sensor able of monitoring ground solar irradiance in real time, with meter scale spatial resolutions over distances of several tens of kilometers (up to 100 km). The technique is based on an optical fiber reflectometry technique (CP-φOTDR), which enables real time and long-range high-sensitivity bolometric measurements of solar radiance with a single optical fiber cable and a single interrogator unit. The method is explained and analyzed theoretically. A validation of the method is proposed using a solar simulator irradiating standard optical fibers, where we demonstrate the ability to detect and quantify solar irradiance with less than a 0.1 W/m resolution., This research was funded in part by: the European Commission (FINESSE, MSCA-ITN-ETN-722509; Ocean-DAS 875302); Ministerio de Ciencia, Innovación y Universidades (IJCI-2017-33856, RTI2018-097957-B-C31, RTI2018-097957-B-C33); Comunidad de Madrid and FEDER program (SINFOTON2-CM: P2018/NMT-4326
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

High-resolution chirped-pulse φ-otdr by means of sub-bands processing

  • Marcon, Leonardo
  • Soto, Marcelo A.
  • Soriano-Amat, Miguel
  • Costa, Luis
  • Fernández-Ruiz, María R.
  • Martins, Hugo F.
  • Palmieri, Luca
  • González-Herráez, Miguel
Conventional chirped-pulse (CP) phase-sensitive optical time-domain reflectometry (CP φ-OTDR) allows the interrogation of tens of kilometers of optical fiber with high accuracies of millikelvin or nanostrain. With respect to standard coherent-detection φ-OTDR, it shows increased robustness to coherent fading and allows a linear and quantitative monitoring of the perturbations acting on the fiber. Its spatial resolution, however, remains a critical parameter and new techniques allowing its improvement without reducing significantly other performances (or increasing the setup complexity) are constantly being researched. In this paper, we propose a method to improve the spatial resolution of CP φ-OTDR without reducing the input pulse width, by means of sub-bands processing. The method is based on adding an optical carrier to the input pulse. Using digital filtering, the spectrum of the fiber backscatter can be split into multiple sub-bands. Each of these sub-bands corresponds to the fiber response generated by a short optical pulse, chirped over a smaller frequency range. This way each sub-band results in φ-OTDR measurements with high spatial resolution, but with a reduced SNR. A dedicated post-processing methodology is proposed to mitigate the SNR reduction obtained from each sub-band, while securing high-resolution measurements of the perturbations acting on the fiber. Experimental results demonstrate the possibility of achieving CP φ-OTDR measurements with a 15-fold spatial resolution improvement over the conventional CP analysis, at the expense of an SNR reduction lower than a factor 2., FINESSE MSCA-ITN-ETN-722509; DOMINO Water JPI; Spanish MINECO and Italian Ministry of University and Research; Comunidad de Madrid and FEDER; MINECO; Fondazione Ing; 10.13039/501100006302-Universidad de Alcalá;
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Humidity-insensitive optical fibers for distributed sensing applications

  • Neves, Tiago F. P.
  • Scherino, Lorenzo
  • Bernard, Rémy
  • Bouet, Monika
  • Pastre, Aymeric
  • Magalhães, Regina
  • Martín-López, Sonia
  • Martins, Hugo F.
  • Petagna, Paolo
  • Thévenaz, Luc
13 pags., 18 figs., 4 tabs., Humidity is a critical environmental factor in various applications, and its temperature dependence must be considered when developing thermo-hygrometer fiber sensors. The optical fibers that constitute the sensor must have a temperature reference, which should be resistant to humidity to avoid cross-sensitivities. This paper presents two innovative optical fibers insensitive to humidity over temperatures ranging from -20∘ C to 55°C. To the best of our knowledge, the novel standard size optical fibers coated with acrylate and silicone are tested under controlled conditions using an optical time-domain reflectometer sensor based on Rayleigh scattering. The sensor achieves meter-range resolution over kilometers of length with a response time of few minutes., CERN, the European Organization for Nuclear Research; Ministère de l’Enseignement Supérieur et de la Recherche; Hauts-de-France Regional Council; European Regional Development Fund (CPER Photonics for Society, P4S); IRCICA, USR 3380, CNRS-Univ, F-59000 Lille, France; European Commission (FINESSE, MSCA-ITN-ETN-722509); Ministerio de Ciencia, Innovación y Universidades (IJCI-2017-33856, RTI2018-097957-BC31, RTI2018-097957-B-C33); Comunidad de Madrid and FEDER program (SINFOTON2-CM: P2018/NMT-4326)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Who Am I? The Influence of Knowledge Networks on PhD Students’ Formation of a Researcher Role Identity

  • Gruber, Marie
  • Crispeels, Thomas
  • D'Este Cukierman, Pablo
Higher education institutes both foster the advancement of knowledge and address society's socioeconomic and environmental challenges. To fulfil these multiple missions requires significant changes to how the role of a researcher is perceived e.g. a researcher identity that is congruent with the objective of contributing to fundamental knowledge while also engaging with non-academic actors, broadly, and entrepreneurship, in particular. We argue that the early stages of an academic career—namely the PhD training trajectory—and the knowledge networks formed during this period have a major influence on the scientist’s future capacity to develop an appropriate researcher role identity. We draw on knowledge network and identity theories to investigate how the knowledge networks (i.e. business, scientific and career knowledge networks) of PhD students promote changes to, reinforce or conflict with the perception of a researcher role identity. Our longitudinal qualitative network study includes PhD students and their supervisors funded by the H2020 FINESSE project. At the network level, we show that scientific knowledge is distributed equally throughout young academics’ networks but that entrepreneurial (business) and career knowledge tend to be concentrated around certain individuals in these networks. On the PhD student level, we observe different pronunciations of the researcher role identity linked to students’ interactions with their knowledge networks. We distinguish identity conflicts due to misalignment between ego and alters which leads to withdrawal from the network. Our findings have practical implications and suggest that universities and PhD student supervisors should support PhD students to develop a researcher identity which is in line with the individual PhD student’s expectations., This study was conducted in the framework of ITN-FINESSE, funded by the European Union’s Horizon 2020 research and innovation program under the Marie Skłodowska-Curie Action Grant Agreement No. 722509., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Professional imprinting mechanisms in the doctoral trajectory: Impact on researcher identity diversity

  • Gruber, Marie
  • Crispeels, Thomas
  • Grinevich, Vadim
  • D'Este Cukierman, Pablo
Shaping one's professional identity is a complex process that starts early on in the professional career and is influenced by many factors along the way. An important process in professional identity formation is professional imprinting. In socialization theory, professional imprinting refers to how individuals adjust behavior and beliefs to fulfill expectations from their working environments and achieve a feeling of belonging during sensitive periods. In this study, we turn to the academic setting, which is characterized by high researcher identity heterogeneity and thus can give us insights into the dynamics of professional identity development. Professional imprints during doctoral training lead to permanent characteristics in one's researcher identity. To investigate professional imprinting and its mechanisms, we conducted a qualitative study involving interviews with 16 PhD students and their supervisors (16 professors and 4 post-docs) within the setting of an EU-funded project. We identify the imprinting mechanisms that shape a researcher's identity during a sensitive period. Our study offers valuable insights for managers and policy makers about the role of supervisors or supervising managers in the development of the professional identities of junior colleagues and about the future career trajectories of people entering academia and industry., This study was conducted in the framework of ITN-FINESSE, funded by the European Union's Horizon 2020 research and innovation program under the Marie Sklodowska-Curie Action Grant Agreement 722509., Peer reviewed
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Contribución de congreso (ConferenceOutput)

Hermetic All-Fiber Phase Modulators Using Joule Heating in Carbon-Coated Fibers

  • García Ruiz, Andrés|||0000-0002-6583-5303
  • Fidalgo Martins, Hugo|||0000-0003-3927-8125
  • Teixeira Magalhaes, Regina Manuela
  • Pereira, João
  • Tarasenko, Oleksandr
  • Norin, Lars
  • Margulis, Walter
  • Martín López, Sonia|||0000-0001-5203-6206
  • González Herráez, Miguel|||0000-0003-2555-2971
26ª edición del congreso internacional Optical Fiber Sensors (OFS26), 24/09/2018-28/09/2018, Lausanne, Suiza., Certain applications of fiber sensors (e.g. avionics, oil industry) imply extreme operating conditions spurring the development of hermetic all-fiber devices. We present a hermetic all-fiber phase modulator based on Joule heating in a carbon-coated fiber., European Commission, Ministerio de Economía y Competitividad, Comunidad de Madrid
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Contribución de congreso (ConferenceOutput)

Extending the Measurement of True Dynamic Strain via Chirped-Pulse Phase-Sensitive Optical Time Domain Reflectometry to 100's of Microstrains

  • Bhatta, Hari
  • Pereira Da Costa, Luis Duarte|||0000-0001-5254-0605
  • García Ruiz, Andrés|||0000-0002-6583-5303
  • Fernández Ruiz, María Del Rosario|||0000-0003-3561-2405
  • Fidalgo Martins, Hugo|||0000-0003-3927-8125
  • Tur, Moshe
  • González Herráez, Miguel|||0000-0003-2555-2971
26ª edición del congreso internacional Optical Fiber Sensors (OFS26), 24/09/2018-28/09/2018, Lausanne, Suiza., It is experimentally demonstrated that a chirped pulse phase-sensitive OTDR can measure large and fast dynamic strains (~100’s of µε, ~100’s of Hz) with SNR of ≥ 24dB. Signal smoothing and impact of error accumulation are also discussed., European Commission
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Machine Learning Methods for Pipeline Surveillance Systems Based on Distributed Acoustic Sensing: A Review

  • Macías Guarasa, Javier|||0000-0002-3303-3963
  • Tejedor Noguerales, Javier
  • Fidalgo Martins, Hugo|||0000-0003-3927-8125
  • Pastor Graells, Juan
  • Corredera Guillén, Pedro
  • Martín López, Sonia|||0000-0001-5203-6206
There is an increasing interest in researchers and companies on the combination of Distributed Acoustic Sensing (DAS) and a Pattern Recognition System (PRS) to detect and classify potentially dangerous events that occur in areas above fiber optic cables deployed along active pipelines, aiming to construct pipeline surveillance systems. This paper presents a review of the literature in what respect to machine learning techniques applied to pipeline surveillance systems based on DAS+PRS (although its scope can also be extended to any other environment in which DAS+PRS strategies are to be used). To do so, we describe the fundamentals of the machine learning approaches when applied to DAS systems, and also do a detailed literature review of the main contributions on this topic. Additionally, this paper addresses the most common issues related to real field deployment and evaluation of DAS+PRS for pipeline threat monitoring, and intends to provide useful insights and recommendations in what respect to the design of such systems. The literature review concludes that a real field deployment of a PRS based on DAS technology is still a challenging area of research, far from being fully solved., European Commission, Ministerio de Economía, Comercio y Empresa, Comunidad de Madrid
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Perspective on distributed acoustic sensing for seismic activity monitoring

  • Fernández Ruiz, María del Rosario|||0000-0003-3561-2405
  • Soto, Marcelo A.
  • Williams, Ethan
  • Martín López, Sonia|||0000-0001-5203-6206
  • Zhan, Zhongwen
  • González Herráez, Miguel|||0000-0003-2555-2971
  • Fidalgo Martins, Hugo|||0000-0003-3927-8125
Continuous, real-time monitoring of surface seismic activity around the globe is of great interest for acquiring new insight in global tomography analyses and for recognition of seismic patterns leading to potentially hazardous situations. The already-existing telecommunication fiber optic network arises as an ideal solution for this application, owing to its ubiquity and the capacity of optical fibers to perform distributed, highly sensitive monitoring of vibrations at relatively low cost (ultra-high density of point sensors available with minimal deployment of new equipment). This perspective article discusses early approaches on the application of fiber-optic distributed acoustic sensors (DAS) for seismic activity monitoring. The benefits and potential impact of DAS technology in this kind of applications are here illustrated with new experimental results on teleseism monitoring based on a specific approach: the so-called chirped-pulse DAS. This technology offers promising prospects for the field of seismic tomography due to its appealing properties in terms of simplicity, consistent sensitivity across sensing channels and robustness. Furthermore, we also report on several signal processing techniques readily applicable to chirped-pulse DAS recordings for extracting relevant seismic information from ambient acoustic noise. The outcome presented here may serve as foundation for a novel conception for ubiquitous seismic monitoring with minimal investment., European Commission, Comunidad de Madrid, Ministerio de Economía y Competitividad, Agencia Estatal de Investigación, Ministerio de Ciencia e Innovación
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Contribución de congreso (ConferenceOutput)

Distributed Detection of Optical Radiation using Chirped-Pulse Phase-Sensitive Optical Time Domain Reflectometry

  • Teixeira Magalhaes, Regina Manuela
  • García Ruiz, Andrés|||0000-0002-6583-5303
  • Fidalgo Martins, Hugo|||0000-0003-3927-8125
  • Pereira, João
  • Margulis, Walter
  • Martín López, Sonia|||0000-0001-5203-6206
  • González Herráez, Miguel|||0000-0003-2555-2971
26ª edición del congreso internacional Optical Fiber Sensors (OFS26), 24/09/2018-28/09/2018, Lausanne, Suiza., A distributed bolometer operating over transparent-coated and carbon-coated optical fibers is proposed. The detection of light with irradiance sensitivities of in the order of 1% of the reference solar irradiance is readily demonstrated., European Commission, Ministerio de Economía y Competitividad, Comunidad de Madrid
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Fully distributed optical fiber strain sensor with 10-12 ε/√Hz sensitivity

  • Pereira da Costa, Luis Duarte|||0000-0001-5254-0605
  • Fidalgo Martins, Hugo|||0000-0003-3927-8125
  • Martín López, Sonia|||0000-0001-5203-6206
  • Fernández Ruiz, María Del Rosario|||0000-0003-3561-2405
  • González Herráez, Miguel|||0000-0003-2555-2971
Advanced optical fiber reflectometry techniques enable spatially distributed measurements of true relative deformations over the length of a conventional optical fiber cable. This methodology is attractive for many applications ranging from intrusion monitoring to seismology. However, accurate quantification of the applied stimulus in general implies sophisticated implementations with poor sensitivity performance. Coherent reflectometry using chirped pulses is an appealing solution, as it provides fast dynamic strain measurements with a simple experimental deployment. Here, we analyze for the first time to our knowledge the lower performance bounds of this technique as a function of the signal-to-noise ratio of the acquired optical signal. We demonstrate that implementations realized so far have been limited by the temporal sampling used instead of the optical signal quality. Through post-processing interpolation approaches, we reach the performance limit for a given set of signal parameters, attaining unprecedented strain sensitivities (?10?12epsilon/?Hz) for km-length distributed sensors in conventional single-mode fibers., European Commission, Ministerio de Economía y Competitividad
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Phase-measuring time-gated BOCDA

  • López Gil, Alexia Inés
  • Martín López, Sonia|||0000-0001-5203-6206
  • González Herráez, Miguel|||0000-0003-2555-2971
We demonstrate a simple scheme that allows performing distributed Brillouin phase spectrum (BPS) measurements with very high spatial resolution (~7 cm) over long (~4.7 km) optical fibers. This is achieved by inserting a Sagnac interferometer (SI) in a Brillouin optical correlation domain analysis (BOCDA) configuration. Over its already-presented time-domain equivalent (SI-BOTDA), this approach reduces the main source of noise (coherent backscatter noise) thanks to the low-coherence nature of the used signals. On the other hand, over the most usual schemes used for distributed BPS measurements, this implementation presents the key advantage of not requiring high-bandwidth detection or complex modulation while reaching unprecedented values of spatial resolution and number of resolved points for this type of measurement. Thanks to the linear dependence of the BPS feature around the Brillouin frequency shift, this scheme could also have the advantage of requiring shorter scanning ranges than amplitude-based configurations., European Commission, Ministerio de Economía y Competitividad, Comunidad de Madrid
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Contribución de congreso (ConferenceOutput)

Impact of the probe pulse shape on the performance of phase-sensitive optical time-domain reflectometry sensors

  • Fernández Ruiz, María del Rosario|||0000-0003-3561-2405
  • Fidalgo Martins, Hugo|||0000-0003-3927-8125
  • Pastor Graells, Juan
  • Martín López, Sonia|||0000-0001-5203-6206
  • González Herráez, Miguel|||0000-0003-2555-2971
25th International Conference on Optical Fiber Sensors, 2017, Jeju, Corea del Sur., In this communication, the effect of the probe pulse shape on the backscattered power trace of phase-sensitive (φ-) OTDR is analyzed. In particular, the power traces obtained with rectangular and Gaussian-like probe pulses are compared, both numerically and experimentally. Our analysis reveals that the use of Gaussian-like pulses can increase the operation range and sensitivity of φOTDR-based sensors in at least two-fold as compared with that obtained from traditionally-employed rectangular-like pulses., European Commission, Ministerio de Economía y Competitividad, Comunidad de Madrid
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

All-optical flip-flops based on dynamic Brillouin gratings in fibers

  • Soto Hernández, Marcelo Alfonso
  • Denisov, A.
  • Angulo Vinuesa, Xabier
  • Martín López, Sonia|||0000-0001-5203-6206
  • Thévenaz, Luc
  • González Herráez, Miguel|||0000-0003-2555-2971
A method to generate an all-optical flip-flop is proposed and experimentally demonstrated based on dynamic Brillouin gratings (DBGs) in polarization maintaining fibers. In a fiber with sufficiently uniform birefringence, this flip-flop can provide extremely long storage times and ultra-wide bandwidth. The experimental results demonstrate an all-optical flip-flop operation using phase-modulated pulses of 300 ps and a 1 m long DBG. This has led to a time-bandwidth product of ∼30, being in this proof-of-concept setup mainly limited by the relatively low bandwidth of the used pulses and the short fiber length., European Commission, Swiss National Science Foundation, Ministerio de Economía y Competitividad, Comunidad de Madrid
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Contribución de congreso (ConferenceOutput)

20 dB SNR enhancement in phase-sensitive OTDR using pulse stretching and recompression

  • Pastor Graells, Juan
  • Romero Cortés, Luis
  • Fidalgo Martins, Hugo|||0000-0003-3927-8125
  • Fernández Ruiz, María del Rosario|||0000-0003-3561-2405
  • Azaña, José
  • Martín López, Sonia|||0000-0001-5203-6206
  • González Herráez, Miguel|||0000-0003-2555-2971
25th International Conference on Optical Fiber Sensors, 2017, Jeju, Corea del Sur., This work shows the possibility of using chirped pulse amplification concepts in order to increase the signal-to-noise ratio (SNR) of phase sensitive optical time domain reflectometry (ΦOTDR) sensors. This method allows to increase the SNR of a ΦOTDR sensor without sacrificing spatial resolution. Here, we report a ΦOTDR sensor with a spatial resolution of 3 mm (limited only by the available detection equipment) and an SNR increase of 20 dB over the traditional architecture. To our knowledge, this is the highest-resolution ΦOTDR sensor reported to date., European Commission, Ministerio de Economía y competitividad, Comunidad de Madrid
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Contribución de congreso (ConferenceOutput)

Towards detection of pipeline integrity threats using a smart fiber optic surveillance system: PIT-STOP project blind field test results

  • Tejedor Noguerales, Javier
  • Macías Guarasa, Javier|||0000-0002-3303-3963
  • Fidalgo Martins, Hugo|||0000-0003-3927-8125
  • Piote, D.
  • Pastor Graells, Juan
  • Martín López, Sonia|||0000-0001-5203-6206
  • Corredera Guillén, Pedro
  • De Pauw, G.
  • De Smet, F.
  • Postvoll, W.
  • Ahlen, C.H.
  • González Herráez, Miguel|||0000-0003-2555-2971
25th International Conference on Optical Fiber Sensors, 2017, Jeju, Corea del Sur., This paper presents the first report on on-line and final blind field test results of a pipeline integrity threat surveillance system. The system integrates a machine+activity identification mode, and a threat detection mode. Two different pipeline sections were selected for the blind tests: One close to the sensor position, and the other 35 km away from it. Results of the machine+activity identification mode showed that about 46% of the times the machine, the activity or both were correctly identified. For the threat detection mode, 8 out of 10 threats were correctly detected, with 1 false alarm., European Commission, Ministerio de Economía y Competitividad, Comunidad de Madrid
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Contribución de congreso (ConferenceOutput)

> 10 dB SNR Enhancement in Distributed Acoustic Sensors through First Order Phase Noise Cancellation

  • Fernández Ruiz, María del Rosario|||0000-0003-3561-2405
  • Pastor Graells, Juan
  • Fidalgo Martins, Hugo|||0000-0003-3927-8125
  • García Ruiz, Andrés|||0000-0002-6583-5303
  • Martín López, Sonia|||0000-0001-5203-6206
  • González Herráez, Miguel|||0000-0003-2555-2971
The Optical Networking and Communication Conference & Exhibition, 11/03/2018-15/03/2018, San Diego, Estados Unidos., The performance of Rayleigh-based distributed acoustic sensors (DAS) is strongly dependent on the coherence of the laser source. We present a simple methodology to reduce the impact of the laser phase noise in chirped-pulse DAS., European Commission, Ministerio de Economía y Competitividad
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Long-range distributed optical fiber hot-wire anemometer based on chirped-pulse ΦTDR

  • García Ruiz, Andrés|||0000-0002-6583-5303
  • Domínguez López, Alejandro|||0000-0001-6065-6106
  • Pastor Graells, Juan
  • Fidalgo Martins, Hugo|||0000-0003-3927-8125
  • Martín López, Sonia|||0000-0001-5203-6206
  • González Herráez, Miguel|||0000-0003-2555-2971
We demonstrate a technique allowing to develop a fully distributed optical fiber hot-wire anemometer capable of reaching a wind speed uncertainty of ~ ± 0.15 m/s (± 0.54 km/h) at only 60 mW/m of dissipated power in the sensing fiber, and within only four minutes of measurement time. This corresponds to similar uncertainty values than previous papers on distributed optical fiber anemometry but requires two orders of magnitude smaller dissipated power and covers at least one order of magnitude longer distance. This breakthrough is possible thanks to the extreme temperature sensitivity and single-shot performance of chirped-pulse phase-sensitive optical time domain reflectometry (PhiOTDR), together with the availability of metal-coated fibers. To achieve these results, a modulated current is fed through the metal coating of the fiber, causing a modulated temperature variation of the fiber core due to Joule effect. The amplitude of this temperature modulation is strongly dependent on the wind speed at which the fiber is subject. Continuous monitoring of the temperature modulation along the fiber allows to determine the wind speed with unprecedented low power injection requirements. Moreover, this procedure makes the system immune to temperature drifts of the fiber, potentially allowing for a simple field deployment. Being a much less power-hungry scheme, this method also comfortably allows for monitoring over much longer distances, in the orders of 10s of km. We expect that this system can have application in dynamic line rating and lateral wind monitoring in railway catenary wires., European Commission, Ministerio de Economía y Competitividad, Comunidad de Madrid, Universidad de Alcalá
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Distributed photothermal spectroscopy in microstructured optical fibers: towards high-resolution mapping of gas presence over long distances

  • García Ruiz, Andrés|||0000-0002-6583-5303
  • Pastor Graells, Juan
  • Fidalgo Martins, Hugo|||0000-0003-3927-8125
  • Hey Tow, Kenny
  • Thévenaz, Luc
  • Martín López, Sonia|||0000-0001-5203-6206
  • González Herráez, Miguel|||0000-0003-2555-2971
Chemical sensing using optical fibers is often challenging, as it is generally difficult to achieve strong interaction between the guided light and the analyte at the wavelength of interest for performing the detection. Despite this difficulty, many schemes exist (and can be found in the literature) for point chemical fiber sensors. However, the challenge increases even further when it comes to performing fully distributed chemical sensing. In this case, the optical signal which interacts with the analyte is typically also the signal that has to travel to and from the interrogator: for a good sensitivity, the light should interact strongly with the analyte, leading inevitably to an increased loss and a reduced range. Few works in the literature actually provide demonstrations of truly distributed chemical sensing and, although there have been several attempts to realize these sensors (e.g. based on special fiber coatings), the vast majority of these attempts has failed to reach widespread use due to several reasons, among them: lack of sensitivity or selectivity, lack of range or resolution, cross sensitivity to temperature or strain, or need to work at specific wavelengths where fiber instrumentation becomes extremely expensive or unavailable. In this work we provide a preliminary demonstration of the possibility of achieving distributed detection of gas presence with spectroscopic selectivity, high spatial resolution, potential for long range measurements and feasibility of having most of the interrogator system working at conventional telecom wavelengths. For a full exploitation of this concept, new fibers (or more likely, fiber bundles) should be developed capable of guiding specific wavelengths in the IR (corresponding to gas absorption wavelengths) with good overlap with the analyte while also having a solid core with good transmission behavior at 1.55 μm, and good thermal coupling between the two guiding structures., European Commission, Ministerio de Economía y Competitividad
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

SNR enhancement in high-resolution phasesensitive OTDR systems using chirped pulse amplification concepts

  • Pastor Graells, Juan
  • Romero Cortés, Luis
  • Fernández Ruiz, María del Rosario|||0000-0003-3561-2405
  • Fidalgo Martins, Hugo|||0000-0003-3927-8125
  • Azaña, José
  • Martín López, Sonia|||0000-0001-5203-6206
  • González Herráez, Miguel|||0000-0003-2555-2971
Phase-sensitive optical time-domain reflectometry (φOTDR) is widely used for the distributed detection of mechanical or environmental variations with resolutions of typically a few meters. The spatial resolution of these distributed sensors is related to the temporal width of the input probe pulses. However, the input pulse width cannot be arbitrarily reduced (to improve the resolution), since a minimum pulse energy is required to achieve a good level of signal-to-noise ratio (SNR), and the pulse peak power is limited by the advent of nonlinear effects. In this Letter, inspired by chirped pulse amplification concepts, we present a novel technique that allows us to increase the SNR by several orders of magnitude in φOTDR-based sensors while reaching spatial resolutions in the centimeter range. In particular, we report an SNR increase of 20 dB over the traditional architecture, which is able to detect strain events with a spatial resolution of 1.8 cm., European Commission, Ministerio de Economía y Competitividad, Comunidad de Madrid
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Phase-sensitive OTDR probe pulse shapes robust against modulation-instability fading

  • Fernández Ruiz, María del Rosario|||0000-0003-3561-2405
  • Fidalgo Martins, Hugo|||0000-0003-3927-8125
  • Pastor Graells, Juan
  • Martín López, Sonia|||0000-0001-5203-6206
  • González Herráez, Miguel|||0000-0003-2555-2971
Typical phase-sensitive optical time-domain reflectometry (ϕOTDR) schemes rely on the use of coherent rectangular-shaped probe pulses. In these systems, there is a trade-off between the signal-to-noise ratio (SNR), spatial resolution, and operating range of the ϕOTDR system. To increase any of these parameters, an increase in the pulse peak power is usually indispensable. However, as it is well known, there is a limit in the allowable increase in probe power due to the onset of undesired nonlinear effects such as modulation instability. In this Letter, we perform an analysis of the effect of the probe pulse shape on the visibility fading due to modulation instability. In particular, four different temporal profiles are chosen: rectangular, Gaussian, triangular, and super-Gaussian (order 2). Our numerical and experimental analyses reveal that the use of triangular or Gaussian-like pulses can significantly inhibit the visibility fading issues. As such, an increase in the range up to twofold for the same pulse energy (i.e., SNR) and nominal spatial resolution can be achieved, as compared with the results obtained when using rectangular pulses. This is due to a more robust behavior of the Gaussian and triangular pulses against the Fermi–Pasta–Ulam recurrence occurring in modulation instability., Comunidad de Madrid, Ministerio de Economía y Competitividad, European Commission
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Contribución de congreso (ConferenceOutput)

Distributed photothermal measurements of gas presence along holey optical fibers

  • García Ruiz, Andrés|||0000-0002-6583-5303
  • Pastor Graells, Juan
  • Fidalgo Martins, Hugo|||0000-0003-3927-8125
  • Hey Tow, Kenny
  • Thévenaz, Luc
  • Martín López, Sonia|||0000-0001-5203-6206
  • González Herráez, Miguel|||0000-0003-2555-2971
25th International Conference on Optical Fiber Sensors, 24/04/2017-28/04/2017, Jeju, Corea del Sur., European Commission, Ministerio de Economía y Competitividad
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Contribución de congreso (ConferenceOutput)

Impact of the laser phase noise on chirped-pulse phase-sensitive OTDR

  • Pastor Graells, Juan
  • Fernández Ruiz, María del Rosario|||0000-0003-3561-2405
  • Fidalgo Martins, Hugo|||0000-0003-3927-8125
  • García Ruiz, Andrés|||0000-0002-6583-5303
  • Martín López, Sonia|||0000-0001-5203-6206
  • González Herráez, Miguel|||0000-0003-2555-2971
25th International conference on Optical Fiber Sensors, , 24/04/2017-28/04/2017, Jeju, Corea del Sur., European Commission, Ministerio de Economía y Competitividad
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Contribución de congreso (ConferenceOutput)

Chirped-pulse phase-sensitive reflectometry: hearing behind the walls with high fidelity

  • González Herráez, Miguel|||0000-0003-2555-2971
  • Pastor Graells, Juan
  • García Ruiz, Andrés|||0000-0002-6583-5303
  • Fernández Ruiz, María del Rosario|||0000-0003-3561-2405
  • Fidalgo Martins, Hugo|||0000-0003-3927-8125
  • Martín López, Sonia|||0000-0001-5203-6206
25th International conference on Optical Fiber Sensors, , 24/04/2017-28/04/2017, Jeju, Corea del Sur., We review our recent work on chirped-pulse phase-sensitive optical time-domain reflectometry along optical fibers and its application in the measurement of true nanostrain variations in the kHz frequency range over km-long fibers. We also show how this technique can be used to perform distributed photothermal measurements of gas presence in suitable microstructured fibers., European Commission, Ministerio de Economía y Competitividad
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Sidelobe apodization in optical pulse compression reflectometry for fiber optic distributed acoustic sensing

  • Mompó, J.J.
  • Martín López, Sonia|||0000-0001-5203-6206
  • González Herráez, Miguel|||0000-0003-2555-2971
  • Loayssa, A.
We demonstrate a technique to reduce the sidelobes in optical pulse compression reflectometry for distributed acoustic sensing. The technique is based on using a Gaussian probe pulse with linear frequency modulation. This is shown to improve the sidelobe suppression by 13 dB compared to the use of square pulses without any significant penalty in terms of spatial resolution. In addition, a 2.25 dB enhancement in signal-to-noise ratio is calculated compared to the use of receiver-side windowing. The method is tested by measuring 700 Hz vibrations with a 140 nϵ amplitude at the end of a 50 km fiber sensing link with 34 cm spatial resolution, giving a record 147,058 spatially resolved points., European Commission, Ministerio de Economía y Competitividad, Comunidad de Madrid
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Real field deployment of a smart fiber optic surveillance system for pipeline integrity threat detection: architectural issues and blind field test results

  • Tejedor Noguerales, Javier
  • Macías Guarasa, Javier|||0000-0002-3303-3963
  • Fidalgo Martins, Hugo|||0000-0003-3927-8125
  • Pastor Graells, Juan
  • Martín López, Sonia|||0000-0001-5203-6206
  • Corredera Guillén, Pedro
  • De Pauw, G.
  • De Smet, F.
  • Postvoll, W.
  • Ahlen, C.H.
  • González Herráez, Miguel|||0000-0003-2555-2971
This paper presents an on-line augmented surveillance system that aims to real time monitoring of activities along a pipeline. The system is deployed in a fully realistic scenario and exposed to real activities carried out in unknown places at unknown times within a given test time interval (socalled blind field tests). We describe the system architecture that includes specific modules to deal with the fact that continuous on-line monitoring needs to be carried out, while addressing the need of limiting the false alarms at reasonable rates. To the best or our knowledge, this is the first published work in which a pipeline integrity threat detection system is deployed in a realistic scenario (using a fiber optic along an active gas pipeline) and is thoroughly and objectively evaluated in realistic blind conditions. The system integrates two operation modes: The machine+activity identification mode identifies the machine that is carrying out a certain activity along the pipeline, and the threat detection mode directly identifies if the activity along the pipeline is a threat or not. The blind field tests are carried out in two different pipeline sections: The first section corresponds to the case where the sensor is close to the sensed area, while the second one places the sensed area about 35 km far from the sensor. Results of the machine+activity identification mode showed an average machine+activity classification rate of 46:6%. For the threat detection mode, 8 out of 10 threats were correctly detected, with only 1 false alarm appearing in a 55:5-hour sensed period., European Commission, Ministerio de Economía y Competitividad, Comunidad de Madrid
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Fiber-based distributed bolometry

  • Teixeira Magalhaes, Regina Manuela
  • García Ruiz, Andrés|||0000-0002-6583-5303
  • Fidalgo Martins, Hugo|||0000-0003-3927-8125
  • Pereira, João
  • Margulis, Walter
  • Martín López, Sonia|||0000-0001-5203-6206
  • González Herráez, Miguel|||0000-0003-2555-2971
Optical fibers are inherently designed to allow no interaction between the guided light and the surrounding optical radiation. Thus, very few optical fiber-based technologies exist in the field of optical radiation sensing. Accomplishing fully-distributed optical radiation sensing appears then as even more challenging since, on top of the lack of sensitivity explained above, we should add the need of addressing thousands of measurement points in a single, continuous optical cable. Nevertheless, it is clear that there exist a number of applications which could benefit from such distributed sensing scheme, particularly if the sensitivity was sufficiently high to be able to measure correctly variations in optical radiation levels compatible with the earth surface. Distributed optical radiation sensing over large distances could be employed in applications such as Dynamic Line Rating (DLR), where it is known that solar radiation can be an important limiting factor in energy transmission through overhead power cables, and also in other applications such as thermo-solar energy. In this work, we present the proof-of-concept of the first distributed bolometer based on optical fiber technology and capable of detecting absolute changes of irradiance. The core idea of the system is the use of a special fiber coating with high emissivity (e.g. carbon coating or black paint). The high absorption of these coatings translates into a temperature change that can be read with sufficiently high sensitivity using phase-sensitive reflectometry. To demonstrate the concept, we interrogate distinct black-coated optical fibers using a chirped-pulse PhiOTDR, and we readily demonstrate the detection of light with resolutions in the order of 1% of the reference solar irradiance, offering a high potential for integration in the aforementioned applications., European Commission, Ministerio de Economía y Competitividad, Comunidad de Madrid
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Contribución de congreso (ConferenceOutput)

Code length limit in phase-sensitive OTDR using ultralong (>1M bits) pulse sequences due to fading induced by fiber optical path drifts

  • Fidalgo Martins, Hugo|||0000-0003-3927-8125
  • Shi, K.
  • Thomsen, B.C.
  • Martín López, Sonia|||0000-0001-5203-6206
  • González Herráez, Miguel|||0000-0003-2555-2971
  • Savory, S.J.
Recently, it has been demonstrated that by recovering the amplitude and phase of the backscattered optical signal, a ΦOTDR using pulse coding can be treated as a fully linear system in terms of trace coding/decoding, thus allowing for the use of tens of thousands of bits with a dramatic improvement of the system performance. In this communication, as a continuation of previous work by the same authors, a preliminary study aiming at characterizing the limits of the system in terms of maximum usable code length is presented. Using a code exceeding 1million bits over a duration of 0.26ms, it is observed that fiber optical path variations exceeding π occurring over a time inferior to the pulse code length can lead to localized fading in the ΦOTDR trace. The occurrence, positions and form of the fading points along the ΦOTDR trace is observed to be strongly dependent on the type, frequency and amplitude of the perturbations applied to the fiber., European Commission, Ministerio de Economía y Competitividad, Comunidad de Madrid
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Resolving 1 million sensing points in an optimized differential time‐domain Brillouin sensor

  • Domínguez López, Alejandro|||0000-0001-6065-6106
  • Soto Hernández, Marcelo Alfonso
  • Martín López, Sonia|||0000-0001-5203-6206
  • Thévenaz, Luc
  • González Herráez, Miguel|||0000-0003-2555-2971
A differential pulse-width pair (DPP) Brillouin distributed fiber sensor is implemented to achieve centimetric spatial resolution over distances of several kilometers. The presented scheme uses a scanning method in which the spectral separation between the two probe sidebands is kept constant, while the optical frequency of the pump is swept to scan the Brillouin spectral response. Experimental results show that this method avoids detrimental temporal distortions of the pump pulses, which in a standard implementation prevent the DPP method from operating over mid-to-long distances. Such a novel scanning procedure allows the resolving, for the first time in pure time-domain Brillouin sensors, of 1,000,000 sensing points, i.e., 1 cm spatial resolution over 10 km in a conventional acquisition time., European Commission, Ministerio de Economía y Competitividad, Comunidad de Madrid
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico antes de ser publicado, versión del autor (Preprint)

Chirped-pulse Phase-sensitive Reflectometer Assisted by First Order Raman Amplification

  • Pastor Graells, Juan
  • García Ruiz, Andrés|||0000-0002-6583-5303
  • Martín López, Sonia|||0000-0001-5203-6206
  • González Herráez, Miguel|||0000-0003-2555-2971
  • Nuño del Campo, Javier
  • Fernández Ruiz, María del Rosario|||0000-0003-3561-2405
  • Fidalgo Martins, Hugo|||0000-0003-3927-8125
The use of linearly chirped probe pulses in phase sensitive-(Phi)OTDR technology has been recently demonstrated to allow for high-resolution, quantitative and dynamic temperature or strain variation measurements in a simple and very robust manner. This new sensing technology, known as chirped-pulse PhiOTDR, had a maximum reported sensing range of 11 km. In this paper, a 75 km sensing range with 10 m spatial resolution is demonstrated by using bidirectional first order Raman amplification. The system is capable of performing truly linear, single-shot measurements of strain perturbations with an update rate of 1 kHz and 1 nepsilon resolution. The time-domain trace of the sensor exhibits a signal to noise ratio (SNR) in the worst point of >3 dB, allowing to monitor vibrations up to 500 Hz with remarkable accuracy. To demonstrate the capabilities of the proposed system, we apply 20 dB (with only 300 ms analysis window and no post-processing) and no evidence of nonlinearity in the acoustic response. The optical nonlinear effects that the probe pulse could suffer along the sensing fiber are thoroughly studied, paying special attention to potential distortions of the pulse shape, particularly in its instantaneous frequency profile. Our analysis reveals that, for proper values of peak power, the pulse does not suffer any major distortion and therefore the system performance is not compromised., European Commission, Ministerio de Economía y Competitividad, Comunidad de Madrid
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Contribución de congreso (ConferenceOutput)

A novel fiber optic based surveillance system for prevention of pipeline integrity threats

  • Tejedor Noguerales, Javier
  • Macías Guarasa, Javier|||0000-0002-3303-3963
  • Fidalgo Martins, Hugo|||0000-0003-3927-8125
  • Piote, D.
  • Pastor Graells, Juan
  • Martín López, Sonia|||0000-0001-5203-6206
  • Corredera Guillén, Pedro
  • González Herráez, Miguel|||0000-0003-2555-2971
This paper presents a novel surveillance system aimed at the detection and classification of threats in the vicinity of a long gas pipeline. The sensing system is based on phase-sensitive optical time domain reflectometry (φ-OTDR) technology for signal acquisition and pattern recognition strategies for threat identification. The proposal incorporates contextual information at the feature level and applies a system combination strategy for pattern classification. The contextual information at the feature level is based on the tandem approach (using feature representations produced by discriminatively-trained multi-layer perceptrons) by employing feature vectors that spread different temporal contexts. The system combination strategy is based on a posterior combination of likelihoods computed from different pattern classification processes. The system operates in two different modes: (1) machine + activity identification, which recognizes the activity being carried out by a certain machine, and (2) threat detection, aimed at detecting threats no matter what the real activity being conducted is. In comparison with a previous system based on the same rigorous experimental setup, the results show that the system combination from the contextual feature information improves the results for each individual class in both operational modes, as well as the overall classification accuracy, with statistically-significant improvements., European Commission, Ministerio de Economía y Competitividad, Comunidad de Madrid
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Contribución de congreso (ConferenceOutput)

A Gaussian Mixture Model-Hidden Markov Model (GMM-HMM)-based fiber optic surveillance system for pipeline integrity threat detection

  • Tejedor Noguerales, Javier
  • Macías Guarasa, Javier|||0000-0002-3303-3963
  • Fidalgo Martins, Hugo|||0000-0003-3927-8125
  • Martín López, Sonia|||0000-0001-5203-6206
  • González Herráez, Miguel|||0000-0003-2555-2971
26th International Conference on Optical Fiber Sensors OFS-26, 24/09/2018-28/09/2018, Lausanne, Suiza., A pipeline integrity threat detection system using Distributed Acoustic Sensing and Artificial Intelligence (AI) is presented. The AI uses a combination of Gaussian Mixture Models and Hidden Markov Models (GMMs-HMMs), outperforming our former GMM-based system., European Commission, Ministerio de Economía y Competitividad, Comunidad de Madrid, Universidad de Alcalá
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Contribución de congreso (ConferenceOutput)

Statistical Analysis of SNR in Chirped-pulse ΦOTDR

  • Fernández Ruiz, María del Rosario|||0000-0003-3561-2405
  • Fidalgo Martins, Hugo|||0000-0003-3927-8125
  • Pereira da Costa, Luis Duarte|||0000-0001-5254-0605
  • Martín López, Sonia|||0000-0001-5203-6206
  • González Herráez, Miguel|||0000-0003-2555-2971
26th International Conference on Optical Fiber Sensors OFS-26, 24/09/2018-28/09/2018, Lausanne, Suiza., The statistical properties of SNR are analyzed for chirped-pulse (CP-)ΦOTDR and compared with traditional ΦOTDR using coherent-detection. CP- ΦOTDR is showed to have drastically narrower (lower variance) SNR distribution, thus providing higher reliability measurements., European Commission, Ministerio de Economía y Competitividad, Comunidad de Madrid
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Contribución de congreso (ConferenceOutput)

Reaching pε/√Hz sensitivity in a distributed optical fiberstrain sensor

  • Pereira da Costa, Luis Duarte|||0000-0001-5254-0605
  • Fidalgo Martins, Hugo|||0000-0003-3927-8125
  • Martín López, Sonia|||0000-0001-5203-6206
  • Fernández Ruiz, María del Rosario|||0000-0003-3561-2405
  • González Herráez, Miguel|||0000-0003-2555-2971
26th International Coference on Optical Fiber Sensors OFS-26, 24/09/2018-28/09/2018, Lausanne, Suiza., Chirped-pulse ΦOTDR provides distributed strain measurement via a time-delay estimation process. We propose a lower bound for performance, after reducing sampling error and compensating phase-noise. We attempt to reach the limit, attaining unprecedented pε/√Hz sensitivities., European Commission, Ministerio de Economía y Competitividad, Comunidad de Madrid
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Laser phase-noise cancellation in chirped-pulse distributed acoustic sensors

e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Contribución de congreso (ConferenceOutput)

Chirped-pulse phase-sensitive reflectometry

  • Pastor Graells, Juan
  • García Ruiz, Andrés|||0000-0002-6583-5303
  • Fernández Ruiz, María del Rosario|||0000-0003-3561-2405
  • Fidalgo Martins, Hugo|||0000-0003-3927-8125
  • Martín López, Sonia|||0000-0001-5203-6206
  • González Herráez, Miguel|||0000-0003-2555-2971
X Reunión Española de Optoelectrónica (OPTOEL17), 12/07/2017-14/07/2017, Santiago de Compostela, España., In this work, a new distributed fiber sensor named chirped-pulse phase-sensitive OTDR is presented. It is based on a phase-sensitive OTDR using direct detection and linearly chirped pulses. The new sensor allows the dynamic and quantitative measurement of temperature/strain changes, with mK/nå resolution. The technique does not require a frequency sweep or coherent detection. It is presented the fundamentals of the sensor and measurements of temperature, vibrations and music., European Commission, Ministerio de Economía y Competitividad, Comunidad de Madrid
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Contribución de congreso (ConferenceOutput)

Distributed gas detection along microstructured optical fibers through photothermal absorption

  • García Ruiz, Andrés|||0000-0002-6583-5303
  • Pastor Graells, Juan
  • Fidalgo Martins, Hugo|||0000-0003-3927-8125
  • Hey Tow, Kenny
  • Thévenaz, Luc
  • Martín López, Sonia|||0000-0001-5203-6206
  • González Herráez, Miguel|||0000-0003-2555-2971
X Reunión Española de Optoelectrónica (OPTOEL17), 12/07/2017-14/07/2017, Santiago de Compostela, España., Chirped-pulse phase-sensitive optical time domain reflectometry has shown a remarkable performance when applied to dynamic measurements of strain and temperature, recently reaching ranges of several kilometers while interrogating the fiber at acoustic frequencies. In this work, its sensitivity, fast response, and high spatial resolution are exploited to demonstrate the reliability of a selective distributed chemical sensor based on the photothermal effect. The presented scheme performs distributed spectroscopic detection of acetylene along a holey fiber. This potentially gives rise to a new kind of distributed chemical sensors able to track the concentration of chemical species over kilometres., European Commission, Ministerio de Economía y Competitividad, Comunidad de Madrid
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Contribución de congreso (ConferenceOutput)

Moduladores de fase en fibra basados en calentamiento Joule sobre fibras cubiertas de carbono

  • García Ruiz, Andrés|||0000-0002-6583-5303
  • Fidalgo Martins, Hugo|||0000-0003-3927-8125
  • Teixeira Magalhaes, Regina Manuela
  • Pereira, João
  • Margulis, Walter
  • Martín López, Sonia|||0000-0001-5203-6206
  • González Herráez, Miguel|||0000-0003-2555-2971
VII Jornadas de Jóvenes Investigadores de la Universidad de Alcalá. Alcalá de Henares, el 12 y 13 de diciembre de 2018., Ciertas aplicaciones de los sistemas de fibra óptica, como los sensores, la aviónica o el ámbito biomédico, implican condiciones extremas de humedad, presión o temperatura. Esto hace necesario el desarrollo de dispositivos de fibra dotados de un recubrimiento hermético al agua e hidrógeno. En este artículo se motiva la necesidad de estos dispositivos y se presenta un modulador de fase a modo de ejemplo y prueba de concepto., Certain applications of fiber sensors (eg. avionics, oil industry) imply extreme operating conditions spurring the development of hermetic all-fiber devices. We present a hermetic all-fiber phase modulator based on Joule heating in a carbon-coated fiber., European Commission, Ministerio de Economía y Competitividad
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Dynamic measurements of 1000 microstrains using chirped-pulse phase-sensitive optical time-domain reflectometry

  • Bhatta, Hari
  • Pereira da Costa, Luis Duarte|||0000-0001-5254-0605
  • García Ruiz, Andrés|||0000-0002-6583-5303
  • Fernández Ruiz, María del Rosario|||0000-0003-3561-2405
  • Fidalgo Martins, Hugo|||0000-0003-3927-8125
  • Tur, Moshe
  • González Herráez, Miguel|||0000-0003-2555-2971
This work demonstrates the capabilities of Chirped pulse, phase-sensitive optical time domain reflectometry (CP-PhiOTDR) to measure large dynamic strains. Benefitting from the use of incoherent detection and single shot measurements, this technique can sample the fiber under test at rates limited only by the fiber length. Yet, for large strains it relies on incremental measurements, where each trace is cross-correlated with its predecessor to determine the relative change of strain. The individual increments are then integrated to provide the strain at the spatial point of measurement. Here, a 4 m section (out of a 210 m spool) was subjected to longitudinal vibration by a mechanical shaker. With a pulse repetition rate of 200 kHz, we present, for the first time to our knowledge, Rayleigh backscattering based distributed measurements of large and fast dynamic strains: from 150 µepsilon at a vibration frequency of 400 Hz to 1190 µepsilon (peak to peak) at 50 Hz over long single-mode fibers. Along with a detailed description of the implemented data processing, we also discuss some of the associated limitations., European Commission, Ministerio de Economía y Competitividad, Comunidad de Madrid
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Hermetic carbon coatings for electro-thermal all-fiber phase modulators

  • García Ruiz, Andrés|||0000-0002-6583-5303
  • Fidalgo Martins, Hugo|||0000-0003-3927-8125
  • Teixeira Magalhaes, Regina Manuela
  • Pereira, João
  • Tarasenko, Oleksandr
  • Norin, Lars
  • Margulis, Walter
  • Martín López, Sonia|||0000-0001-5203-6206
  • González Herráez, Miguel|||0000-0003-2555-2971
Joule effect and thermal response of several carbon-coated fibers are modelled and analysed. An electro-thermally driven all-fiber phase modulator based on these principles is proposed and a proof of concept of it is characterized. This kind of fibers could be the basis for developing all-fiber components aimed to operate in environments where the strength increase and impermeability to hydrogen diffusion guaranteed by the carbon coating is crucial., European Commission, Ministerio de Economía y Competitividad, Comunidad de Madrid
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Contribución de congreso (ConferenceOutput)

Spectrally-resolved distributed optical fibre bolometry

  • Teixeira Magalhaes, Regina Manuela
  • García Ruiz, Andrés|||0000-0002-6583-5303
  • Martín López, Sonia|||0000-0001-5203-6206
  • González Herráez, Miguel|||0000-0003-2555-2971
  • Fidalgo Martins, Hugo|||0000-0003-3927-8125
7th European Workshop on Optical Fibre Sensors (EWOFS'2019), , 01/10/2019-04/10/2019, Limassol, Chipre., We propose a fully distributed optical fiber sensor capable of performing spectrally-resolved detection of visible light radiation. The sensor is based on monitoring the temperature change between two optical fibers with different coating colors. In our implementation, the temperature is simultaneously monitored in a black-coated fiber (which is highly sensitive to all input wavelengths) and a color-coated fiber, which basically acts as an optical stop-band filter for a certain input color. By comparing the temperature behavior attained for each fiber, it is possible to obtain information of the wavelength/color of a given optical radiation present in the environment. Suitable calibration could lead to distributed colorimetry measurements., European Commission, Ministerio de Economía y Competitividad, Comunidad de Madrid, Ministerio de Ciencia e Innovación
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

A Contextual GMM-HMM Smart Fiber Optic Surveillance System for Pipeline Integrity Threat Detection

  • Tejedor Noguerales, Javier
  • Macías Guarasa, Javier|||0000-0002-3303-3963
  • Fidalgo Martins, Hugo|||0000-0003-3927-8125
  • Martín López, Sonia|||0000-0001-5203-6206
  • González Herráez, Miguel|||0000-0003-2555-2971
This paper presents a novel pipeline integrity surveillance system aimed to the detection and classification of threats in the vicinity of a long gas pipeline. The sensing system is based on phase-sensitive optical time domain reflectometry ( $\phi$ -OTDR) technology for signal acquisition and pattern recognition strategies for threat identification. The proposal incorporates contextual information at the feature level in a Gaussian Mixture Model-Hidden Markov Model (GMM-HMM)-based pattern classification system and applies a system combination strategy for acoustic trace decision. System combination relies on majority voting of the decisions given by the individual contextual information sources and the number of states used for HMM modelling. The system runs in two different modes: (1) machine+activity identification, which recognizes the activity being carried out by a certain machine, and (2) threat detection, aimed to detect threats no matter what the real activity being conducted is. In comparison with the previous systems based on the same rigorous experimental setup, the results show that the system combination from the contextual feature information and the GMM-HMM approach improves the results for both machine+activity identification (7.6% of relative improvement with respect to the best published result in the literature on this task) and threat detection (26.6% of relative improvement in the false alarm rate with 2.1% relative reduction in the threat detection rate)., European Commission, Ministerio de Economía y Competitividad, Comunidad de Madrid
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Fully distributed optical fiber strain sensor with 10−12ε/√Hz sensitivity

  • Pereira da Costa, Luis Duarte|||0000-0001-5254-0605
  • Fidalgo Martins, Hugo|||0000-0003-3927-8125
  • Martín López, Sonia|||0000-0001-5203-6206
  • Fernández Ruiz, María del Rosario|||0000-0003-3561-2405
  • González Herráez, Miguel|||0000-0003-2555-2971
Advanced optical fiber reflectometry techniques enable spatially distributed measurements of true relative deformations over the length of a conventional optical fiber cable. This methodology is attractive for many applications ranging from intrusion monitoring to seismology. However, accurate quantification of the applied stimulus in general implies sophisticated implementations with poor sensitivity performance. Coherent reflectometry using chirped pulses is an appealing solution, as it provides fast dynamic strain measurements with a simple experimental deployment. Here, we analyze for the first time to our knowledge the lower performance bounds of this technique as a function of the signal-to-noise ratio of the acquired optical signal. We demonstrate that implementations realized so far have been limited by the temporal sampling used instead of the optical signal quality. Through post-processing interpolation approaches, we reach the performance limit for a given set of signal parameters, attaining unprecedented strain sensitivities (&#8764;10&#8722;12epsilon/&#8730;Hz) for km-length distributed sensors in conventional single-mode fibers., European Commission, Ministerio de Economía y Competitividad, Comunidad de Madrid
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Analysis and reduction of large errors in Rayleigh-based distributed sensor

  • Li, Zhang
  • Pereira da Costa, Luis Duarte|||0000-0001-5254-0605
  • Zhisheng, Yang
  • Soto Hernández, Marcelo Alfonso
  • González Herráez, Miguel|||0000-0003-2555-2971
  • Thévenaz, Luc
Commonly, the frequency shift of back-reflection spectra is the key parameter to measure quantitatively local temperature or strain changes in frequency-scanned Rayleigh-based distributed fiber sensors. Cross correlation is the most common method to estimate the frequency shift; however, large errors may take place, particularly when the frequency shift introduced by the temperature or strain change applied to the fiber is beyond the spectral width of the main correlation peak. This fact substantially limits the reliability of the system, and therefore requires careful analysis and possible solutions. In this paper, an analytical model is proposed to thoroughly describe the probability of large errors. This model shows that the cross correlation intrinsically and inevitably leads to large errors when the sampled signal distribution is finite, even under perfect signal-to-noise ratio. As an alternative solution to overcome such a problem, least mean squares is employed to estimate the frequency shift. In addition to reducing the probability of large errors, the proposed method only requires to measure a narrow spectrum, significantly reducing the measurement time compared to state-of-the-art implementations. Both the model and the solution are experimentally verified using a frequency-scanned phase-sensitive optical time-domain reflectometry system, achieving a spatial resolution of 5 cm, with a sensing range of 860 m and an acquisition time below 15 s, over a measurable temperature range of more than 100 K with a repeatability of 20 mK, corresponding to a temperature dynamic range of 5000 resolved points., European Commission, Swiss Commission for Technology and Innovation
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Contribución de congreso (ConferenceOutput)

Monitorización de actividad sísmica usando sensores distribuidos en fibra basados en φOTDR y pulsos con chirp

  • Fernández Ruiz, María del Rosario|||0000-0003-3561-2405
  • Fidalgo Martins, Hugo|||0000-0003-3927-8125
  • Williams, Ethan
  • Pereira da Costa, Luis Duarte|||0000-0001-5254-0605
  • Teixeira Magalhaes, Regina Manuela
  • Martín López, Sonia|||0000-0001-5203-6206
  • Zhan, Zhongwen
  • González Herráez, Miguel|||0000-0003-2555-2971
XI Reunión Española de Optoelectrónica (OPTOEL 2019), 03/07/2019-05/07/2019, Zaragoza, España., Actualmente, los sistemas de comunicaciones ópticas de larga distancia se basan en una extensa red de fibra óptica que se encuentra instalada alrededor del globo. En este trabajo, presentamos cómo esta red de fibra puede ser empleada para un uso alternativo: el análisis de movimientos sísmicos del planeta. Para ello, se ha utilizado la fibra como elemento sensor en un sistema de sensado distribuido basado en OTDR sensible a fase (φOTDR) usando pulsos con chirp con el que se ha detectado un terremoto de grado 8,2 ocurrido el pasado agosto en las Islas Fiji. Este terremoto se ha detectado en dos localizaciones diferentes, un entorno metropolitano en la ciudad de Pasadena (California, EEUU) y un entorno submarino en la costa de Bélgica. Usando técnicas de procesado lineales se ha podido ex-traer información del terremoto del ruido ambiente. Los resultados aquí mostrados muestran el gran potencial de la red de fibra ya instalada para su uso como sismógrafo distribuido., Ministerio de Economía y Competitividad, Comunidad de Madrid, European Commission
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Contribución de congreso (ConferenceOutput)

Sensor acústico distribuido en fibra óptica con una sensibilidad de 10-12 ε/√Hz

  • Costa, Luis
  • Fidalgo Martins, Hugo|||0000-0003-3927-8125
  • Martín López, Sonia|||0000-0001-5203-6206
  • Fernández Ruiz, María del Rosario|||0000-0003-3561-2405
  • González Herráez, Miguel|||0000-0003-2555-2971
XI Reunión Española de Optoelectrónica (OPTOEL 2019), 03/07/2019-05/07/2019, Zaragoza, España, Los avances en las técnicas de reflectometría óptica en el dominio del tiempo en fibra óptica permiten realizar mediciones completamente distribuidas de deformación dinámica sobre decenas de kilómetros. Esto es muy interesante para algunas aplicaciones que van desde la geofísica hasta la detección de intrusiones en grandes perímetros. Una solución atractiva consiste en la reflectometría coherente empleando pulsos con chirp (CP-φOTDR), debido a su implementación experimental simple y sus buenas prestaciones de sensibilidad. Este trabajo analiza los límites de sensibilidad de esta técnica, en función de las propiedades de la señal óptica obtenida. Usando técnicas de post-procesado adecuado, se demuestra experimentalmente el límite de rendimiento para el estimador empleado, alcanzando sensibilidades en la deformación de 10-12 ε/√Hz para mediciones totalmente distribuidas, a lo largo de kilómetros de fibra monomodo convencional., European Commission, Ministerio de Economía y Competitividad, Comunidad de Madrid
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Contribución de congreso (ConferenceOutput)

Medición distribuida de presencia de gases en fibras ópticas huecas mediante efecto fototérmico

  • García Ruiz, Andrés|||0000-0002-6583-5303
  • Pastor Graells, Juan
  • Fidalgo Martins, Hugo|||0000-0003-3927-8125
  • Hey Tow, Kenny
  • Thévenaz, Luc
  • Martín López, Sonia|||0000-0001-5203-6206
  • González Herráez, Miguel|||0000-0003-2555-2971
VI Jornadas de Jóvenes Investigadores de la Universidad de Alcalá. Alcalá de Henares, del 14 al 16 de diciembre de 2016, La reflectometría óptica sensible a la fase en dominio temporal (PhiOTDR) con pulsos con chirp ha demostrado prestaciones sobresalientes en su aplicación a la medición dinámica de deformaciones y temperatura mediante fibra óptica, alcanzando recientemente rangos de varios kilómetros y frecuencias de adquisición acústicas. En este trabajo, se explotan su sensibilidad, rapidez, y alta resolución espacial para la implementación de un primer sensor químico selectivo y distribuido basado en el efecto fototérmico. El esquema presentado es capaz de realizar medidas espectroscópicas distribuidas, detectando acetileno en una fibra hueca de 10 m. Esto abre la puerta a una posible nueva generación de sensores químicos distribuidos capaces de monitorizar la concentración de sustancias a lo largo de kilómetros., Chirped-pulse phase-sensitive optical time domain reflectometry has shown a remarkable performance when applied to dynamic measurements of strain and temperature, recently reaching ranges of several kilometers while interrogating the fiber at acoustic frequencies. In this work, its sensitivity, fast response, and high spatial resolution are exploited to implement a proof-of-concept of a selective distributed chemical sensor based on the photothermal effect. The presented scheme is able to perform distributed spectroscopic measurements of acetylene presence along a 10 m-long holey fiber. This potentially gives rise to a new kind of distributed chemical sensors capable of tracking the concentration of chemical species over kilometres., European Commission, Ministerio de Economía y Competitividad, Comunidad de Madrid
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Contribución de congreso (ConferenceOutput)

Sensor acústico distribuido basado en OTDR sensible a la fase y pulsos chirpeados

  • Pastor Graells, Juan
  • García Ruiz, Andrés|||0000-0002-6583-5303
  • Fernández Ruiz, María del Rosario|||0000-0003-3561-2405
  • Fidalgo Martins, Hugo|||0000-0003-3927-8125
  • Martín López, Sonia|||0000-0001-5203-6206
  • González Herráez, Miguel|||0000-0003-2555-2971
VI Jornadas de Jóvenes Investigadores de la Universidad de Alcalá. Alcalá de Henares, del 14 al 16 de diciembre de 2016., Los sensores distribuidos permiten la medición de diferentes parámetros físicos (temperatura, deformaciones, vibraciones, etc.) a lo largo de grandes distancias. Todos ellos emplean los fenómenos de scattering (Rayleigh, Brillouin, Raman) que sufre la luz al propagarse por una fibra óptica. En el presente artículo se profundizará en los sensores OTDR sensibles a la fase, ampliamente utilizados para la detección y caracterización de vibraciones. Este tipo de medidas, a lo largo de decenas de kilómetros, permiten el control de amenazas en grandes perímetros e infraestructuras civiles. Se introducirá el último avance en esta tecnología, el cual permite la realización de medidas acústicas empleando pulsos chirpeados., Distributed sensors allow for the measurement of different physical parameters (temperature, deformations, vibrations, etc.) along large distances. All of them employ scattering phenomena (Rayleigh, Brillouin, Raman) produced during the light propagation along the optical fibers. The present work will focus on the phase-sensitive OTDR, commonly used for detection and characterization of vibrations. These measurements, realized along tens of kilometers, permit the surveillance of large perimeters and civil infrastructures. It will be introduced a recent progress in this technology, which allows for distributed acoustic measurements using chirped pulses., European Commission, Ministerio de Economía y Competitividad, Comunidad de Madrid
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Contribución de congreso (ConferenceOutput)

Hydrogen and deuterium distributed sensing using Chirped-Pulse φOTDR

  • García Ruiz, Andrés|||0000-0002-6583-5303
  • Morana, Adriana
  • Fidalgo Martins, Hugo|||0000-0003-3927-8125
  • Martín López, Sonia|||0000-0001-5203-6206
  • González Herráez, Miguel|||0000-0003-2555-2971
  • Delepine-Lesoille, Sylvie
  • Boukenter, Aziz
  • Ouerdane, Youcef
  • Girard, Sylvain
7th European Workshop on Optical Fibre Sensors (EWOFS'2019), 01/10/2019-04/10/2019, Limassol, Chipre., The detection and quantification of the presence of certain chemical species is of central importance regarding permanent structural health monitoring of key industrial fields and civil infrastructures such as oil extraction boreholes or radioactive waste repositories, where H2 is released. With this work we propose and test a competitive technique able to measure the concentration of hydrogen and deuterium thanks to their diffusion into the silica glass of a standard optical fiber, already employed for the distributed monitoring of large infrastructures. The proposed technique, based on Chirped-Pulse Phasesensitive Reflectometry (CP-φOTDR), could represent a novel solution for this problem, thanks to its ability to provide dynamical measurements of refractive index change, with great linearity and sensitivities of 10-8 refractive index units, featuring spatial resolutions of a few meters and kilometric sensing ranges., European Commission, Ministerio de Economía y Competitividad, Comunidad de Madrid, Agencia Estatal de Investigación, Ministerio de Ciencia e Innovación
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Contribución de congreso (ConferenceOutput)

Characterization and modelling of induced "virtual" perturbations in chirped pulse φ-OTDR

  • Soriano Amat, Miguel|||0000-0002-4819-3898
  • Marcon, Leonardo
  • Pereira da Costa, Luis Duarte|||0000-0001-5254-0605
  • García Ruiz, Andrés|||0000-0002-6583-5303
  • Fidalgo Martins, Hugo|||0000-0003-3927-8125
  • Martín López, Sonia|||0000-0001-5203-6206
  • Palmieri, Luca
  • González Herráez, Miguel|||0000-0003-2555-2971
7th European Workshop on Optical Fibre Sensors (EWOFS'2019), 01/10/2019-04/10/2019, Limassol, Chipre., Any temperature change or strain acting on a section of the fiber induces a local variation of the refractive index. If the fiber is monitored by a chirped pulse φ-OTDR system, the variation of the refractive index causes a local shift of the backscattering trace and produces a change in the round trip time of the light coming from any further position of the fiber. While usually negligible, due to the high sensitivity of the chirped pulse φ-OTDR, in extreme occasions the distributed round trip time change may appear in the measurement as an undesired “virtual” perturbation. In this paper, we discuss and experimentally validate a mathematical model to account for (and eventually correct) the “virtual” perturbation., European Commission, Ministerio de Economía y Competitividad, Agencia Estatal de Investigación, Comunidad de Madrid, Ministerio de Ciencia e Innovación
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Contribución de congreso (ConferenceOutput)

Transforming the fiber-optic network into a dense and ultrasensitive seismic sensor array

  • García Ruiz, Andrés|||0000-0002-6583-5303
  • Teixeira Magalhaes, Regina Manuela
  • Pereira da Costa, Luis Duarte|||0000-0001-5254-0605
  • Cobo Mancheño, Javier
  • Fidalgo Martins, Hugo|||0000-0003-3927-8125
  • Fernández Ruiz, María del Rosario|||0000-0003-3561-2405
  • Martín López, Sonia|||0000-0001-5203-6206
  • González Herráez, Miguel|||0000-0003-2555-2971
20th International Conference on Transparent Optical Networks (ICTON 2018), 01/07/2018-05/07/2018, Bucarest, Rumania., We show a technology capable of performing position-resolved measurement of nanostrain perturbations along a conventional optical fiber cable, with meter-scale resolution. This technology can be deployed in already existing networks to achieve a dense and ultrasensitive seismic sensor array. Applications ranging from seismic protection to chemical sensing are explored., European Commission, Ministerio de Economía y Competitividad, Comunidad de Madrid
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Distributed detection of hydrogen and deuterium diffusion into a single-mode optical fiber with chirped-pulse phase-sensitive optical time-domain reflectometry

  • García Ruiz, Andrés|||0000-0002-6583-5303
  • Morana, Adriana
  • Pereira da Costa, Luis Duarte|||0000-0001-5254-0605
  • Fidalgo Martins, Hugo|||0000-0003-3927-8125
  • Martín López, Sonia|||0000-0001-5203-6206
  • González Herráez, Miguel|||0000-0003-2555-2971
  • Boukenter, Aziz
  • Ouerdane, Youcef
  • Girard, Sylvain
For some infrastructures like oil and gas extraction boreholes or radioactive waste repositories, where distributed optical fiber sensors are employed to grant the safety of the facilities, the presence of gas species such as hydrogen or deuterium is one more relevant parameter to monitor. The possibility of employing the same kind of sensors for this purpose is of special interest, reducing the cost by employing a single interrogator, able to measure more than one parameter by simply employing an adequate sensing fiber. To meet this goal, we present here a sensor based on Chirped Pulse Phase sensitive Optical Time Domain Reflectometry, which is able to detect these species while they diffuse into the silica fiber core. Its ability to measure the induced change of its refractive index with a sensitivity around 10 8 has allowed determining hydrogen concentration in the silica core with precision in the order of 10 3 mol/m3 and spatial resolution ~6 m, while also providing an indirect measurement of the solubility of deuterium in a standard telecom-grade optical fiber., European Commission, Ministerio de Economía y Competitividad, Comunidad de Madrid, Agencia Estatal de Investigación, Ministerio de Ciencia e Innovación
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Contribución de congreso (ConferenceOutput)

Photonic Seismology

  • González Herráez, Miguel|||0000-0003-2555-2971
  • Fernández Ruiz, María del Rosario|||0000-0003-3561-2405
  • Teixeira Magalhaes, Regina Manuela
  • Pereira da Costa, Luis Duarte|||0000-0001-5254-0605
  • Fidalgo Martins, Hugo|||0000-0003-3927-8125
  • García Ruiz, Andrés|||0000-0002-6583-5303
  • Martín López, Sonia|||0000-0001-5203-6206
  • Williams, Ethan
  • Zhan, Zhongwen
  • Vantilho, Roel
International Photonics and OptoElectronics Meetings 2019, OFDA, 11/11/2019-14/11/2019, Wuhan, China., One of the greatest outstanding challenges in seismology is the sparsity of instrumentation across the Earth, particularly in the oceans. In this work we show that optical fiberbased distributed acoustic sensors (DAS) can represent a low-cost solution (basically inexistent so far) for monitoring seismicity in remote areas of the ocean. This solution can retrofit existing telecommunication optical fiber cables lying in the ocean and transform them (with no basic change in the cable itself) into powerful seismic sensing arrays. With a single optoelectronic unit in the end of the cable (onshore), a full span of 50-100 km can be monitored, with thousands of measuring points interrogated., European Commission, Ministerio de Economía y Competitividad, Ministerio de Ciencia, Innovación y Universidades, Comunidad de Madrid
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Analysis of disturbance-induced "virtual" perturbations in chirped pulse φ-OTDR

  • Marcon, Leonardo
  • González Herráez, Miguel|||0000-0003-2555-2971
  • Soriano Amat, Miguel|||0000-0002-4819-3898
  • Veronese, Riccardo
  • García Ruiz, Andrés|||0000-0002-6583-5303
  • Calabrese, Marco
  • Pereira da Costa, Luis Duarte|||0000-0001-5254-0605
  • Fernández Ruiz, María del Rosario|||0000-0003-3561-2405
  • Fidalgo Martins, Hugo|||0000-0003-3927-8125
  • Palmieri, Luca
When a disturbance acts on a fiber it induces a change in the local refractive index that influences the fiber backscattering trace. If a chirped pulse φ-OTDR setup is used to interrogate the fiber, this refractive index change appears as a local shift of the received trace, linear to the acting perturbation. However, the refractive index change influences the round trip time of all the backscattering components generated by further fiber sections as well. Due to the high sensitivity of chirped pulse φ-OTDR, the change in the round trip time of the backscattering components, which is usually negligible, may appear as a virtual perturbation in certain conditions. In this letter we derive a mathematical model for the virtual perturbation induced by a disturbance acting on the fiber, when the measurement is performed by a chirped pulse φ-OTDR. We experimentally validate the model by inducing a temperatura change on a known span of fiber while monitoring its effects in a further fiber section kept at rest. The experimental results are then analyzed and compared with the theoretical ones., European Commission, Ministerio de Economía y Competitividad, Agencia Estatal de Investigación, Comunidad de Madrid, Ministerio de Ciencia e Innovación
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico antes de ser publicado, versión del autor (Preprint)

Steady-sensitivity distributed acoustic sensors

  • Fernández Ruiz, María del Rosario|||0000-0003-3561-2405
  • Fidalgo Martins, Hugo|||0000-0003-3927-8125
  • Pereira da Costa, Luis Duarte|||0000-0001-5254-0605
  • Martín López, Sonia|||0000-0001-5203-6206
  • González Herráez, Miguel|||0000-0003-2555-2971
Distributed acoustic sensors (DAS) based on phase-sensitive optical time-domain reflectometry (phiOTDR) have demonstrated interesting performance for many applications ranging from seismology to pipeline protection. However, the sensitivity of traditional DAS relying on coherent detection is strongly dependent on the system noise and trace fading points, offering poor reliability of the results in the spatial dimension. In this manuscript, we evaluate the statistical performance of a recently proposed DAS technique, namely, chirped-pulse phiOTDR, in terms of sensitivity and signal-to-noise ratio (SNR). Our results show behavioral trends that significantly differ from those of traditional DAS. In particular, the acoustic SNR distribution in chirped-pulse DAS is notably narrower than that in the traditional case, allowing to ensure a large system dynamic range across all the points of the optical trace. Hence, chirped-pulse phiOTDR offers localized perturbation detection with very high reliability, almost independent of trace fading points, along the complete reachable range of the sensor., European Commission, Ministerio de Economía y Competitividad, Comunidad de Madrid
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Contribución de congreso (ConferenceOutput)

Caracterización de errores sistemáticos inducidos en sistemas Chirped Pulse φ-OTDR

  • Soriano Amat, Miguel|||0000-0002-4819-3898
  • Marcon, Leonardo
  • Veronese, Riccardo
  • García Ruiz, Andrés|||0000-0002-6583-5303
  • Calabrese, Marco
  • Pereira da Costa, Luis Duarte|||0000-0001-5254-0605
  • Fidalgo Martins, Hugo|||0000-0003-3927-8125
  • Palmieri, Luca
  • Martín López, Sonia|||0000-0001-5203-6206
  • González Herráez, Miguel|||0000-0003-2555-2971
XI Reunión Española de Optoelectrónica (OPTOEL 2019), 03/07/2019-05/07/2019, Zaragoza, España., Los sistemas φ-OTDR detectan y miden perturbaciones que experimenta la fibra óptica en cada uno de sus puntos de forma simultánea. Para ello, se sirven de la técnica OTDR y utilizan pulsos provenientes de una fuente con baja anchura de línea. Cuando un punto de la fibra óptica sufre una perturbación, ésta puede introducir pequeños retrasos en el tiempo de vuelo de la señal retrodispersada provenientes de puntos más alejados del inicio de la fibra que del punto perturbado. Debido al tipo de medida que realizan, y a la alta sensibilidad que presentan los sistemas φ-OTDR de pulso chirpado, dichos retrasos pueden generar errores sistemáticos que deriven en una pérdida de fidelidad a lo largo del proceso de medida. En este estudio, se propone un experimento en el que, mediante la aplicación de un gradiente de temperatura en una sección intermedia de fibra, se analiza la repercusión de esta perturbación en puntos más alejados del extremo en el que está ubicado el sistema interrogador. Estos errores, en todo caso, serán muy pequeños en la mayor parte de aplicaciones habituales de estos sistemas., European Commission, Ministerio de Economía y Competitividad, Comunidad de Madrid
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Contribución de congreso (ConferenceOutput)

Aplicación de la técnica φOTDR de pulsos chirpados a la detección distribuida de hidrógeno y deuterio

  • García Ruiz, Andrés|||0000-0002-6583-5303
  • Morana, Adriana
  • Fidalgo Martins, Hugo|||0000-0003-3927-8125
  • Martín López, Sonia|||0000-0001-5203-6206
  • González Herráez, Miguel|||0000-0003-2555-2971
  • Delepine-Lesoille, Sylvie
  • Boukenter, Aziz
  • Ouerdane, Youcef
  • Girard, Sylvain
XI Reunión Española de Optoelectrónica (OPTOEL 2019), 03/07/2019-05/07/2019, Zaragoza, España., La detección y cuantificación de la presencia de ciertas especies químicas tiene una importancia central en lo referente a la vigilancia permanente de grandes estructuras en sectores industriales clave y ciertas infraestructuras civiles como los pozos de extracción de combustibles fósiles o los almacenes de residuos radioactivos, donde se libera H2. En este trabajo se propone y prueba una técnica competitiva capaz de medir la concentración de hidrógeno y deuterio gracias a su difusión en el vidrio de sílice de una fibra óptica convencional, empleadas de hecho para la monitorización distribuida de grandes infraestructuras. La técnica propuesta, basada en CP-φiOTDR, podría representar una novedosa solución para este problema, gracias a su demostrada eficacia para la realización de medidas dinámicas de variaciones de índice de refracción, con gran linealidad y sensibilidades del orden de 10^{-8} unidades de índice de refracción, proporcionando resoluciones espaciales de unos pocos metros y extendiéndose sobre rangos de medida de decenas de kilómetros., European Commission, Ministerio de Economía y Competitividad, Comunidad de Madrid