Pasar al contenido principal

REDUCCION DE LOS EFECTOS DE RUIDO EN SISTEMAS DE FIBRA OPTICA NO LINEALES

TEC2015-71127-C2-2-R

•
Nombre agencia financiadora Ministerio de Economía y Competitividad
Acrónimo agencia financiadora MINECO
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2015
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Unidad de gestión Dirección General de Investigación Científica y Técnica
Centro beneficiario UNIVERSIDAD DE ALCALA
Identificador persistente http://dx.doi.org/10.13039/501100003329

Resultados relacionados

Resultados totales (Incluyendo duplicados): 83
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación

A Novel Fiber Optic Based Surveillance System for Prevention of Pipeline Integrity Threats

  • Tejedor, Javier
  • Macías-Guarasa, Javier
  • Martins, Hugo F.
  • Piote, Daniel
  • Pastor-Graells, Juan
  • Martín-López, Sonia
  • Corredera, Pedro
  • González-Herráez, Miguel
This paper presents a novel surveillance system aimed at the detection and classification of threats in the vicinity of a long gas pipeline. The sensing system is based on phase-sensitive optical time domain reflectometry (<i>ϕ</i>-OTDR) technology for signal acquisition and pattern recognition strategies for threat identification. The proposal incorporates contextual information at the feature level and applies a system combination strategy for pattern classification. The contextual information at the feature level is based on the tandem approach (using feature representations produced by discriminatively-trained multi-layer perceptrons) by employing feature vectors that spread different temporal contexts. The system combination strategy is based on a posterior combination of likelihoods computed from different pattern classification processes. The system operates in two different modes: (1) machine + activity identification, which recognizes the activity being carried out by a certain machine, and (2) threat detection, aimed at detecting threats no matter what the real activity being conducted is. In comparison with a previous system based on the same rigorous experimental setup, the results show that the system combination from the contextual feature information improves the results for each individual class in both operational modes, as well as the overall classification accuracy, with statistically-significant improvements., Some authors were supported by funding from the European Research Council through Starting Grant UFINE (Grant Number #307441), Water JPI, the WaterWorks2014 Co-funded Call, the European Commission (Horizon 2020) through Project H2020-MSCA-ITN-2016/722509-FINESSE, the Spanish Ministry of Economy and Competitivity, the Spanish “Plan Nacional de I+D+i” through Projects TEC2013-45265-R, TEC2015-71127-C2-2-R, TIN2013-47630-C2-1-R and TIN2016-75982-C2-1-R, and the regional program SINFOTONCM: S2013/MIT-2790, funded by the “Comunidad de Madrid”. H.F.M. acknowledges funding through the FP7 ITN ICONE program, Grant #608099 funded by the European Commission. J.P.-G. acknowledges funding from the Spanish Ministry of Economy and Competitivity through an FPI contract. S.M.-L. acknowledges funding from the Spanish Ministry of Science and Innovation through a “Ramón y Cajal” contract., We acknowledge support by the CSIC Open Access Publication Initiative through its Unit of Information Resources for Research (URICI).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

FBG reflectivity impact on RIN in ultralong laser amplifiers

  • Rizzelli, Giuseppe
  • Iqbal, M. A.
  • Gallazzi, Francesca
  • Rosa, Pawel
  • Tan, Mingming
  • Corredera, Pedro
  • Ania Castañón, Juan Diego
  • Harper, Paul
42nd European Conference on Optical Communication, Dusseldorf, Germany, 18-22 Sept. 2016 http://ieeexplore.ieee.org/document/7767668/, We analyse, both numerically and experimentally, the relative intensity noise transfer in ultra-long Raman laser amplifiers isolating the combined effect of front-FBG reflectivity and pump power split and quantitatively showing their impact on a 100 km, 2nd-order, bidirectionally pumped configuration., This work was funded by FP7 ITN programme ICONE (608099), Spanish grants ANOMALOS (TEC2015-71127-C2) and SINFOTON (S2013/MIT-2790-SINFOTON-CM)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

The role of distributed Raman amplification in the times of the 'capacity crunch'

  • Ania Castañón, Juan Diego
  • Rosa, Pawel
  • Rizzelli, Giuseppe
  • Gallazzi, Francesca
  • Nuño, Javier
  • Corredera, Pedro
Conferencia invitada ; 18th International Conference on Transparent Optical Networks, Trento, Italy, July 10th-14th, 2016, Distributed Raman amplification has different roles to play in combination with of a range of potential solutions to deal with the nonlinear Shannon limit. Here, we will cover issues such as asymmetry optimisation for optical-phase conjugation nonlinear compensation, the combination of optimised distributed amplification with digital nonlinear compensation techniques and the challenges of adopting high-spectral density formats while still making use of all the possible available bandwidth. Some examples are drawn from recent results from the past few years., The authors wish to acknowledge the financial support of the EU through the FP7 ITN programme ICONE (608099), the Marie Sklodowska-Curie individual fellowship ‘CHAOS’ (658982), as well as Spanish grants ANOMALOS (TEC2015-71127-C2) and SINFOTON (S2013/MIT-2790-SINFOTON-CM)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Machine Learning Methods for Pipeline Surveillance Systems Based on Distributed Acoustic Sensing: A Review

  • Tejedor, Javier
  • Macías-Guarasa, Javier
  • Martins, Hugo F.
  • Pastor-Graells, Juan
  • Corredera, Pedro
  • Martín-López, Sonia
There is an increasing interest in researchers and companies on the combination of Distributed Acoustic Sensing (DAS) and a Pattern Recognition System (PRS) to detect and classify potentially dangerous events that occur in areas above fiber optic cables deployed along active pipelines, aiming to construct pipeline surveillance systems. This paper presents a review of the literature in what respect to machine learning techniques applied to pipeline surveillance systems based on DAS+PRS (although its scope can also be extended to any other environment in which DAS+PRS strategies are to be used). To do so, we describe the fundamentals of the machine learning approaches when applied to DAS systems, and also do a detailed literature review of the main contributions on this topic. Additionally, this paper addresses the most common issues related to real field deployment and evaluation of DAS+PRS for pipeline threat monitoring, and intends to provide useful insights and recommendations in what respect to the design of such systems. The literature review concludes that a real field deployment of a PRS based on DAS technology is still a challenging area of research, far from being fully solved., Some authors were supported by funding from the European Research Council through Starting Grant UFINE (grant number #307441), Water JPI, the WaterWorks2014 Cofunded Call, the European Commission (Horizon 2020) through project H2020-MSCA-ITN-2016/722509-FINESSE, the Spanish Ministry of Economy and Competitiveness, the Spanish “Plan Nacional de I+D+i” through projects TEC2013-45265-R, TEC2015-71127-C2-2-R, TIN2013-47630-C2-1-R, and TIN2016-75982-C2-1-R, and the regional program SINFOTONCM: S2013/MIT-2790 funded by the “Comunidad de Madrid”. H.F.M. acknowledges funding through the FP7 ITN ICONE program, grant number #608099 funded by the European Commission. J.P.-G. acknowledges funding from the Spanish Ministry of Economy and Competivity through an FPI contract. SML acknowledges funding from the Spanish Ministry of Science and Innovation through a “Ramón y Cajal” contract., We acknowledge support by the CSIC Open Access Publication Initiative through its Unit of Information Resources for Research (URICI).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Temperature dependence mitigation in stationary Fourier-transform on-chip spectrometers

  • Herrero-Bermello, A.
  • Velasco, Aitor V.
  • Podmore, Hugh
  • Cheben, Pavel
  • Schmid, Jens H.
  • Janz, S.
  • Calvo, María L.
  • Xu, Dan-Xia
  • Scott, Alan
  • Corredera, Pedro
4 pags., 5 figs., We present two techniques for mitigating the effects of temperature drifts in waveguide spatial heterodyne Fourier-transform on-chip spectrometers. In high-resolution devices, large optical path length differences result in an increased sensitivity to temperature variations and impose stringent requirements on the thermal stabilization system. In order to overcome this limitation, here we experimentally demonstrate two new temperature mitigation techniques based on a temperature-sensitive calibration and phase error correction. The spectrometer chip under analysis comprises an array of 32 Mach¿Zehnder interferometers fabricated on a silicon-on-insulator platform. The optical path delays are implemented as microphotonic spirals of linearly increasing length up to 3.779 cm, yielding a spectral resolution of 17 pm. We demonstrate that the degradation in retrieved spectra caused by temperature drift is effectively eliminated by temperature-sensitive calibration and phase error correction., Ministerio de Economía y Competitividad (MINECO) (FJCI-2014-22836, TEC2015-71127-C2-1-R, TEC2015-71127-C2-2-R); Comunidad de Madrid (S2013/ MIT-2790); EURAMET (H2020-MSCA-RISE-2016: SENSIBLE); EMPIR Programme (JRP-i22 14IND13- PhotInd); National Research Council Canada (NRC); Horizon 2020 Framework Programme (H2020) (734331)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Experimental Demonstration of Low-Uncertainty Calibration Methods for Bragg Grating Interrogators

  • Miguel, José Luis de
  • Galindo Santos, Juan
  • Pulido de Torres, C.
  • Salgado, Pedro
  • Velasco, Aitor V.
  • Corredera, Pedro
In this paper we propose and demonstrate two alternative methods for the high-precision calibration of fiber Bragg grating (FBG) interrogators. The first method is based on the direct comparison between the wavelength measurements of the interrogator under test and a calibrated wavemeter, while analyzing a simulated symmetric Bragg grating constructed by a tunable filter and a fiber mirror. This first method is applicable to most commercial systems but presents an uncertainty limited by the spectral width and the wavelength stability of the tunable filter. The second method consists in measuring multiple reference absorption lines of calibrated absorption gas cells. This second method presents lower uncertainties, limited only by the optical resolution of the interrogator and the wavelength uncertainty of the reference cell absorption lines. However, it imposes more restrictive requirements on the interrogator software. Both methods were experimentally demonstrated by calibrating multiple commercial systems, reaching uncertainties down to 0.63 pm at a central wavelength of 1550 nm., This research was funded in part by the Spanish “Ministerio de Economía y Competitividad” through projects TEC2015-71127-C2-1-R and TEC2015-71127-C2-2-R, by the “Comunidad de Madrid” through program SINFOTON-CM S2013/MIT-2790, and by EURAMET through projects JRP-i22 14IND13 Photind, H2020-MSCA-RISE-2015:SENSIBLE, and ENV58 MeteoMet2. The EMRP is jointly funded by the EMRP participating countries within EURAMET and the European Union. This work was also supported in part by the EMPIR initiative, which is co-funded by the European Union’s Horizon 2020 research and innovation programme and the EMPIR Participating States. Aitor V. Velasco acknowledges support from “Ministerio de Economía y Competitividad” through grant IJCI-2016-30484
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Towards detection of pipeline integrity threats using a SmarT fiber-OPtic surveillance system: PIT-STOP project blind field test results

  • Tejedor, J.
  • Macías-Guarasa, Javier
  • Martins, Hugo F.
  • Piote, Daniel
  • Pastor-Graells, Juan
  • Martín-López, Sonia
  • Corredera, Pedro
  • Pauw, G. de
  • Smet, F. de
  • Postvoll, W.
  • Ahien, C. H.
  • González-Herráez, Miguel
4 pags., 1 fig., 1 tab., This paper presents the first report on on-line and final blind field test results of a pipeline integrity threat surveillance system. The system integrates a machine+activity identification mode, and a threat detection mode. Two different pipeline sections were selected for the blind tests: One close to the sensor position, and the other 35 km away from it. Results of the machine+activity identification mode showed that about 46% of the times the machine, the activity or both were correctly identified. For the threat detection mode, 8 out of 10 threats were correctly detected, with 1 false alarm., This work was mainly supported by three GERG partners (Fluxys, Statoil, and Gassco) under project PIT-STOP, and was also supported in part by: the European Research Council through project UFINE (Grant #307441); the EC Horizon 2020 program through the FINESSE project MSCA-ITN-ETN-722509; the DOMINO Water JPI project, under the WaterWorks2014 cofounded call by EC Horizon 2020 and Spanish MINECO; the Spanish MINECO through projects TEC2013-45265-R, TEC2015-71127-C2-2-R, and TIN2013-47630-C2-1-R; and the regional program SINFOTON-CM: S2013/MIT-2790. The work of HFM was supported by EU funding through the FP7 ITN ICONE program (Grant #608099). The work of JPG and SML was supported by the Spanish MINECO through FPI and \Ramón y Cajal> contract, respectively., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Calibración de células de absorción como referencia de longitud de onda para comunicaciones

  • Álvarez-Martínez, Héctor
  • Galindo Santos, Juan
  • Miguel, José Luis de
  • Velasco, Aitor V.
  • Corredera, Pedro
San Fernando (Cádiz), 6, 7, 8 y 9 de junio de 2017. -- http://www.congresodemetrologia.es/, Las referencias absolutas de longitud de onda para las bandas de comunicaciones en fibra óptica (1260 nm - 1675 nm) son necesarias en la calibración en longitud de onda de los equipos de caracterización de componentes ópticos (OSA, filtros ópticos, láseres, interrogadores de sensores, etc.). Las células de absorción de gases moleculares son una solución fácil de integrar y que proporcionan múltiples absorciones útiles como referencia en este rango. En este trabajo se presenta un método ágil de calibración de células de absorción desarrollado en el Instituto de Óptica del CSIC (IO-CSIC), basado en la medida precisa de las líneas de absorción de los gases usando láseres sintonizables y un medidor de longitud de onda de referencia. Este método se ha demostrado calibrando una célula de absorción compuesta por la mezcla de H12C14N,, Este trabajo ha sido financiado en parte por la Comunidad de Madrid (programa SINFOTONCM: S2013/MIT-2790), el MINECO a través de los proyectos TEC2015-71127-C2-1-R, TEC2015-71127-C2-2-R, y EURAMET (JRP-i22 14IND13-PhotInd). La iniciativa EMPIR está co-financiada por los países participantes y el programa de investigación e innovación del Horizonte 2020 de la Unión Europea. Aitor V. Velasco agradece al MINECO el contrato FJCI- 2014-22836., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Calibración de la resolución espacial y el error de medida en sensores distribuidos de temperatura sobre fibra óptica

  • Herrero-Bermello, A.
  • Miguel, José Luis de
  • Velasco, Aitor V.
  • Galindo Santos, Juan
  • Corredera, Pedro
San Fernando (Cádiz), 6, 7, 8 y 9 de junio de 2017. -- http://www.congresodemetrologia.es/, En este trabajo se presenta una técnica de fácil implementación para la calibración de sensores distribuidos sobre fibra óptica, capaz de caracterizar simultáneamente la resolución espacial y el error de medida. El método se basa en el uso de dos receptáculos de agua independientes de temperatura controlada. En el primero, más cercano al equipo interrogador, se caracteriza el error e incertidumbre de medida mediante un carrete de elevada longitud en ambiente controlado. En el segundo, ubicado en el límite del rango de medida, se introducen segmentos de fibra de longitud variable para verificación de resolución. La técnica propuesta se ejemplifica con la calibración experimental de un equipo comercial DTS basado en Raman espontáneo con resolución espacial teórica menor de 0.9 m y un rango de distancia de medida de 2 km., Este trabajo está financiado por el Ministerio de Economía y competitividad (MINECO) de España a través de los proyectos TEC2015-71127-C2-1-R y TEC2015-71127-C2-2-R, la Comunidad de Madrid (programa SINFOTON-CM S2013/MIT-2790), y EURAMET a través del proyectos JRPi22 14IND13-PhotInd y el programa de investigación e innovación del Horizonte 2020 de la Unión Europea a través del proyecto Marie Sklodowska-Curie No. 734331 (SENSIBLE). La iniciativa EMPIR está co-financiada por los países participantes y el programa de investigación e innovación del Horizonte 2020 de la Unión Europea. Aitor V. Velasco agradece al MINECO el contrato FJCI-2014-22836., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Calibración de medidores de longitud de onda con un peine de frecuencias autoreferenciado.

  • Galindo Santos, Juan
  • Velasco, Aitor V.
  • Corredera, Pedro
San Fernando (Cádiz), 6, 7, 8 y 9 de junio de 2017. -- http://www.congresodemetrologia.es/, Los peines de frecuencia óptica autoreferenciados son la herramienta más precisa disponible en la actualidad para metrología de frecuencias. En este trabajo se presenta una técnica para la calibración de medidores de longitud de onda (WM) usados en comunicaciones ópticas frente a un peine de frecuencias autoreferenciado. Dicha técnica se demuestra experimentalmente sobre dos WM con resoluciones de 100 MHz y 10 MHz, respectivamente, para la banda C de comunicaciones ópticas. Las incertidumbres de la calibración obtenidas son de ±59 MHz y ±12 MHz respectivamente. Así mismo, se ha estudiado la estabilidad a largo plazo (tiempos de funcionamiento de 2 700 000 s) del medidor de longitud de onda de mayor resolución, observándose una dependencia lineal entre la temperatura y el error de medida del WM. La compensación de estas derivas térmicas permitió reducir la incertidumbre de calibración de ±19 MHz a ±12 MHz., Este trabajo ha sido financiado en parte por la Comunidad de Madrid (programa SINFOTONCM: S2013/MIT-2790), el MINECO a través de los proyectos TEC2015-71127-C2-1-R, TEC2015-71127-C2-2-R, y EURAMET (JRP-i22 14IND13-PhotInd). La iniciativa EMPIR está co-financiada por los países participantes y el programa de investigación e innovación del Horizonte 2020 de la Unión Europea. Aitor V. Velasco agradece al MINECO el contrato FJCI-2014- 22836, Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Calibración de medidores de potencia para fibra de plástico en el intervalo VIS-NIR

  • Galindo Santos, Juan
  • Pulido de Torres, C.
  • Miguel, José Luis de
  • Corredera, Pedro
San Fernando (Cádiz), 6, 7, 8 y 9 de junio de 2017. -- http://www.congresodemetrologia.es/, Se presenta en esta ponencia una técnica de calibración de medidores de potencia óptica para fibras de plástico o polímero (POF) en el rango VIS-NIR (400 nm 1000 nm). La técnica desarrollada consiste en la comparación directa de la potencia óptica medida en el instrumento a calibrar y la obtenida con un radiómetro piroeléctrico eléctricamente calibrado (ECPR). La técnica usada presenta una incertidumbre relativa del ±1,1 %, cuando se usa con fibras monomodo., Este trabajo ha sido financiado en parte por el Ministerio de Economía y Competitividad de España a través de los proyectos TEC2015-71127-C2-1-R, TEC2015-71127-C2-2-R y FIS2014- 61633-EXP, la Comunidad de Madrid a través del proyecto S2013/MIT-2790, y EURAMET a través del proyecto JRP-i22 IND22 Photind., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Distributed acoustic sensing using chirped-pulse phase-sensitive OTDR technology

  • Fernández-Ruiz, María R.
  • Costa, Luis
  • Martins, Hugo F.
In 2016, a novel interrogation technique for phase-sensitive (Φ)OTDR was mathematically formalized and experimentally demonstrated, based on the use of a chirped-pulse as a probe, in an otherwise direct-detection-based standard setup: chirped-pulse (CP-)ΦOTDR. Despite its short lifetime, this methodology has now become a reference for distributed acoustic sensing (DAS) due to its valuable advantages with respect to conventional (i.e., coherent-detection or frequency sweeping-based) interrogation strategies. Presenting intrinsic immunity to fading points and using direct detection, CP-ΦOTDR presents reliable high sensitivity measurements while keeping the cost and complexity of the setup bounded. Numerous technique analyses and contributions to study/improve its performance have been recently published, leading to a solid, highly competitive and extraordinarily simple method for distributed fibre sensing. The interesting sensing features achieved in these last years CP-ΦOTDR have motivated the use of this technology in diverse applications, such as seismology or civil engineering (monitoring of pipelines, train rails, etc.). Besides, new areas of application of this distributed sensor have been explored, based on distributed chemical (refractive index) and temperature-based transducer sensors. In this review, the principle of operation of CP-ΦOTDR is revisited, highlighting the particular performance characteristics of the technique and offering a comparison with alternative distributed sensing methods (with focus on coherent-detection-based ΦOTDR). The sensor is also characterized for operation in up to 100 km with a low cost-setup, showing performances close to the attainable limits for a given set of signal parameters [≈tens-hundreds of pe/sqrt(Hz)]. The areas of application of this sensing technology employed so far are briefly outlined in order to frame the technology., This work was supported by project FINESSE MSCA-ITN-ETN-722509; the DOMINO Water JPI project under the WaterWorks2014 cofounded call by EC Horizon 2020 and Spanish MINECO; Comunidad de Madrid and FEDER Program under grant SINFOTON2-CM: P2018/NMT-4326; the Spanish Government under projects TEC2015-71127-C2-2-R and RTI2018-097957-B-C31. M.R.F.M and H.F.M. acknowledge financial support from the Spanish MICINN under contracts no. FJCI-2016-27881 and IJCI-2017-33856, respectively., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Distributed sensing of microseisms and teleseisms with submarine dark fibers

  • Williams, Ethan F.
  • Fernández-Ruiz, María R.
  • Magalhães, Regina
  • Vanthillo, R.
  • Zhan, Zhongwen
  • González-Herráez, Miguel
  • Martins, Hugo F.
11 pags., 9 figs.-- Open Access funded by Creative Commons Atribution Licence 3.0, Sparse seismic instrumentation in the oceans limits our understanding of deep Earth dynamics and submarine earthquakes. Distributed acoustic sensing (DAS), an emerging technology that converts optical fiber to seismic sensors, allows us to leverage pre-existing submarine telecommunication cables for seismic monitoring. Here we report observations of microseism, local surface gravity waves, and a teleseismic earthquake along a 4192-sensor ocean-bottom DAS array offshore Belgium. We observe in-situ how opposing groups of ocean surface gravity waves generate double-frequency seismic Scholte waves, as described by the Longuet-Higgins theory of microseism generation. We also extract P- and S-wave phases from the 2018-08-19 M8.2 Fiji deep earthquake in the 0.01-1 Hz frequency band, though waveform fidelity is low at high frequencies. These results suggest significant potential of DAS in next-generation submarine seismic networks., This work was supported in part by the members of the Space Innovation Council at Caltech, the Caltech-JPL President’s and Director’s Research and Development Fund (PDRDF), the DOMINO Water JPI project under the Water Works 2014 cofounded call by EC Horizon 2020 and Spanish MINECO, and the regional program SINFOTON2-CM: P2018/NMT-4326. E.F.W. was supported by an NSF Graduate Research Fellowship. M.R.F.-R. and H.F.M. acknowledge financial support from the Spanish Ministerio de Ciencia, Innovación y Universidades (MICINN) under contract nos. FJCI-2016-27881 and IJCI-2017-33856, respectively. R.M. acknowledges financial support from the EU’s Horizon 2020 research and innovation program under the Marie Sklodowska-Curie Action grant agreement no. 722509EU (ITN-FINESSE). Z.Z. acknowledges support under NSF CAREER Award 1848166. M.G.-H. acknowledges funding from the Spanish MINECO through projects TEC2015-71127-C2-2-R and RTI2018-097957-B-C31.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Dynamic Measurements of 1000 Microstrains Using Chirped-Pulse Phase-Sensitive Optical Time-Domain Reflectometry

  • Datta Bhatta, Hari
  • Costa, Luis
  • García-Ruiz, A.
  • Fernández-Ruiz, María R.
  • Martins, Hugo F.
  • Tur, Moshe
  • González-Herráez, Miguel
8 pags., 6 figs., -- Open Access funded by Creative Commons Atribution Licence 4.0, This paper extends the capabilities of chirped-pulse phase-sensitive optical time-domain reflectometry to the measurement of large dynamic strains over hundreds of meters of standard single-mode fiber. Benefitting from single-shot strain measurements, this technique has already demonstrated dynamic strains of the order of submicrostrains with a sensitivity of picostrains-per-root-Hertz. Yet, for large dynamic strains, it relies on the accumulation of incremental measurements, where each trace is cross correlated with its predecessor to determine the relative change of strain. However, practical time records of measured high slew-rate applied perturbations contain disturbing outliers. We then detail and analyze a post-processing strategy to mitigate this limitation. Through this strategy, we are able to achieve for the first time (to our knowledge) high signal-to-noise Rayleigh-backscattering-based distributed measurements of large and fast dynamic strains of a longitudinally vibrating 4 m section at the end of 210 m of a single-mode fiber: from peak to peak 150-1190 ¿¿ at vibration frequency of 400 Hz and 50 Hz, respectively., The work of H. D. Bhatta was performed in the framework of ITN-FINESSE, funded by the European Union’s Horizon 2020 research and innovation program under the Marie Sklodowska-Curie Action grant agreement n.° 722509. Additional support was obtained from EC H2020 (project DOMINO, ERANET Cofund Water Works 2014 call) and Spanish MINECO (project DOMINO, project TEC2015-71127-C2-2-R and project RTI2018- 097957-B-C31), UAH (FPI contract) and Regional Program SINFOTON2-CM: P2018/NMT-4326. (Corresponding author: Hari Datta Bhatta.)
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Fully Distributed Optical Fiber Strain Sensor With 10−12 ϵ/√Hz Sensitivity

  • Costa, Luis
  • Martins, Hugo F.
  • Martín-López, Sonia
  • Fernández-Ruiz, María R.
  • González-Herráez, Miguel
9 pags., 8 figs., Advanced optical fiber reflectometry techniques enable spatially distributed measurements of true relative deformations over the length of a conventional optical fiber cable. This methodology is attractive for many applications ranging from intrusion monitoring to seismology. However, accurate quantification of the applied stimulus in general implies sophisticated implementations with poor sensitivity performance. Coherent reflectometry using chirped pulses is an appealing solution, as it provides fast dynamic strain measurements with a simple experimental deployment. Here, we analyze for the first time to our knowledge the lower performance bounds of this technique as a function of the signal-to-noise ratio of the acquired optical signal. We demonstrate that implementations realized so far have been limited by the temporal sampling used instead of the optical signal quality. Through post-processing interpolation approaches, we reach the performance limit for a given set of signal parameters, attaining unprecedented strain sensitivities (10 -12 ¿/¿Hz) for km-length distributed sensors in conventional single-mode fibers., This work was supported in part by The European Research Council through project U-FINE under Grant 307441; in part by ITNFINESSE, funded by the European Union’s Horizon 2020 research and innovation program under the Marie-Sklodowska-Curie Action Grant n° 722509; in part by the DOMINO Water JPI project, under the WaterWorks2014 cofounded call by EC Horizon 2020 and Spanish MINECO PCIN-2015-219; in part by the Spanish MINECO through the Project TEC2015-71127-C2-2-R; and in part by the regional program SINFOTON-CM: S2013/MIT-2790. The work of L. Costa was supported by EU funding through the project MSCA-ITN-ETN-722509. The work of S. Martín-López and M. R. Fernández-Ruiz was supported by the Spanish MINECO through a “Ramón y Cajal” and “Juan de la Cierva” contracts, respectively. (Corresponding author: Luis Costa.)
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

High-fidelity distributed acoustic sensing using optical fibers: a new tool in Geophysics

  • Fernández-Ruiz, María R.
  • Martins-López, Sonia
  • González-Herráez, Miguel
  • Martins, Hugo F.
Cancún, Quintana Roo, México, September 23-27, 2019., The possibility of using a pre-existent fiber optic network as Earth’s nervous system to monitor deformations with high sensitivity across the world in real time is overviewed. The potential and results on the use of distributed acoustic sensing (DAS) as a tool for seismology are discussed, with emphasis on the recent technology of chirped-pulse DAS., This work was supported by project FINESSE MSCA-ITN-ETN-722509; the DOMINO Water JPI project under the WaterWorks2014 cofounded call by EC Horizon 2020 and Spanish MINECO; Comunidad de Madrid and FEDER Program under grant SINFOTON2-CM: P2018/NMT-4326; project TEC2015-71127-C2-2-R. M.R.F.M and H.F.M. acknowledge financial support from the Spanish Ministerio de Ciencia, Innovación y Universidades (CIENCIA) under contracts no. FJCI-2016-27881 and IJCI-2017-33856, respectively
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Distributed acoustic sensing for seismic activity monitoring

  • Fernández-Ruiz, María R.
  • Soto, Marcelo A.
  • Williams, Ethan F.
  • Martín-López, Sonia
  • Zhan, Zhongwen
  • González-Herráez, Miguel
  • Martins, Hugo F.
17 pags., 12 figs., Continuous, real-time monitoring of surface seismic activity around the globe is of great interest for acquiring new insight into global tomography analyses and for recognition of seismic patterns leading to potentially hazardous situations. The already-existing telecommunication fiber optic network arises as an ideal solution for this application, owing to its ubiquity and the capacity of optical fibers to perform distributed, highly sensitive monitoring of vibrations at relatively low cost (ultra-high density of point sensors available with minimal deployment of new equipment). This perspective article discusses early approaches on the application of fiber-optic distributed acoustic sensors (DASs) for seismic activity monitoring. The benefits and potential impact of DAS technology in these kinds of applications are here illustrated with new experimental results on teleseism monitoring based on a specific approach: the so-called chirped-pulse DAS. This technology offers promising prospects for the field of seismic tomography due to its appealing properties in terms of simplicity, consistent sensitivity across sensing channels, and robustness. Furthermore, we also report on several signal processing techniques readily applicable to chirped-pulse DAS recordings for extracting relevant seismic information from ambient acoustic noise. The outcome presented here may serve as a foundation for a novel conception for ubiquitous seismic monitoring with minimal investment., This work was supported by the project FINESSE, Grant No. MSCA-ITN-ETN-722509; the DOMINO Water JPI project under the WaterWorks2014 cofounded call by EC Horizon 2020 and Spanish MINECO; the Comunidad de Madrid and FEDER Program under Grant No. SINFOTON2-CM: P2018/NMT-4326; the Spanish Government under Project Nos. TEC2015-71127-C2-2-R, RTI2018- 097957-B-C31, and RTI2018-097957-B-C33. M.R.F.M. and H.F.M. acknowledge financial support from the Spanish MICINN under Contract Nos. FJCI-2016-27881 and IJCI-2017-33856, respectively. M.A.S. acknowledges AC3E Basal Project No. FB0008 and thanks “Becas Iberoamérica Santander Universidades Convocatoria 2018” for supporting his research stay at the Universidad de Alcalá, Spain.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Influence of the AlN interlayer thickness on the photovoltaic properties of in-rich AlInN on Si heterojunctions deposited by RF sputtering

  • Valdueza-Felip, S.
  • Núñez-Cascajero, A.
  • Blasco, R.
  • Montero, D.
  • Grenet, L.
  • Mata, M. de la
  • Fernández, S.
  • Rodríguez de Marcos, Luís
  • Molina, S.I.
  • Olea, J.
  • Naranjo, Fernando B.
8 pags., 5 figs., 1 tab., We report the influence of the AlN interlayer thickness (0-15 nm) on the photovoltaic properties of AlInN on Si heterojunction solar cells deposited by radio frequency sputtering. The poor junction band alignment and the presence of a 2-3 nm thick amorphous layer at the interface mitigates the response in devices fabricated by direct deposition of n-AlInN on p-Si(111). Adding a 4-nm-thick AlN buffer layer improves the AlInN crystalline quality and the interface alignment leading to devices with a conversion efficiency of 1.5% under 1-sun AM1.5G illumination. For thicker buffers the performance lessens due to inefficient tunnel transport through the AlN. These results demonstrate the feasibility of using In-rich AlInN alloys deposited by radio frequency sputtering as novel electron-selective contacts to Si-heterojunction solar cells., Support from projects NitPho (TEC2014-60483-R), ANOMALOS (TEC2015- 71127-C2-2-R), INFRASIL (TEC 2013-41730-R), SINFOTON (S2013/MIT 2790), MADRID-PV (2013/MAE-2780), PhotoAl (CCG2015/EXP-014), PAI research group (TEP-946 INNANOMAT), and FEDER-EU is acknowledged. TEM data were taken at DME-SC-ICyT-UCA. A. Nuñez- ˜ Cascajero thanks her grant to the University of Alcala and D. Montero acknowledges his contract ´ BES-2014-067585.
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Contribución de congreso (ConferenceOutput)

Hermetic All-Fiber Phase Modulators Using Joule Heating in Carbon-Coated Fibers

  • García Ruiz, Andrés|||0000-0002-6583-5303
  • Fidalgo Martins, Hugo|||0000-0003-3927-8125
  • Teixeira Magalhaes, Regina Manuela
  • Pereira, João
  • Tarasenko, Oleksandr
  • Norin, Lars
  • Margulis, Walter
  • Martín López, Sonia|||0000-0001-5203-6206
  • González Herráez, Miguel|||0000-0003-2555-2971
26ª edición del congreso internacional Optical Fiber Sensors (OFS26), 24/09/2018-28/09/2018, Lausanne, Suiza., Certain applications of fiber sensors (e.g. avionics, oil industry) imply extreme operating conditions spurring the development of hermetic all-fiber devices. We present a hermetic all-fiber phase modulator based on Joule heating in a carbon-coated fiber., European Commission, Ministerio de Economía y Competitividad, Comunidad de Madrid
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Contribución de congreso (ConferenceOutput)

Láser ultracompacto anclado en modos basado en InN con pulsos <100 fs

  • Monroy Lafuente, Laura|||0000-0002-1764-2267
  • Soriano Amat, Miguel|||0000-0002-4819-3898
  • Esteban Martinez, Óscar|||0000-0002-2824-6593
  • González Herráez, Miguel|||0000-0003-2555-2971
  • Naranjo Vega, Fernando Bernabé|||0000-0002-2119-6749
XII Reunión Española de Optoelectrónica, OPTOEL’21, 30 Jun.-02 Jul. 2021, Virtual., Tipo de participación: Participativo - Póster, Entidad organizadora: Comité de Optoelectrónica de la Sociedad Española de Óptica (SEDOPTICA), Forma de contribución: Artículo científico, En este trabajo se presenta un láser pasivo anclado en modos (mode-locked) basado en Nitruro de Indio (InN) como absorbente saturable (SA) a una longitud de onda de 1.55 μm. Utilizando una lente GRIN como acoplamiento en fibra, se obtiene un sistema compacto sin necesidad de ajustes posteriores una vez fijado el acoplo fibra-lente-SA, así como la obtención de pulsos láser altamente estables en el rango de los femtosegundos., Comunidad de Madrid, Agencia Estatal de Investigación, Ministerio de Economía y Competitividad
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Machine Learning Methods for Pipeline Surveillance Systems Based on Distributed Acoustic Sensing: A Review

  • Macías Guarasa, Javier|||0000-0002-3303-3963
  • Tejedor Noguerales, Javier
  • Fidalgo Martins, Hugo|||0000-0003-3927-8125
  • Pastor Graells, Juan
  • Corredera Guillén, Pedro
  • Martín López, Sonia|||0000-0001-5203-6206
There is an increasing interest in researchers and companies on the combination of Distributed Acoustic Sensing (DAS) and a Pattern Recognition System (PRS) to detect and classify potentially dangerous events that occur in areas above fiber optic cables deployed along active pipelines, aiming to construct pipeline surveillance systems. This paper presents a review of the literature in what respect to machine learning techniques applied to pipeline surveillance systems based on DAS+PRS (although its scope can also be extended to any other environment in which DAS+PRS strategies are to be used). To do so, we describe the fundamentals of the machine learning approaches when applied to DAS systems, and also do a detailed literature review of the main contributions on this topic. Additionally, this paper addresses the most common issues related to real field deployment and evaluation of DAS+PRS for pipeline threat monitoring, and intends to provide useful insights and recommendations in what respect to the design of such systems. The literature review concludes that a real field deployment of a PRS based on DAS technology is still a challenging area of research, far from being fully solved., European Commission, Ministerio de Economía, Comercio y Empresa, Comunidad de Madrid
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Perspective on distributed acoustic sensing for seismic activity monitoring

  • Fernández Ruiz, María del Rosario|||0000-0003-3561-2405
  • Soto, Marcelo A.
  • Williams, Ethan
  • Martín López, Sonia|||0000-0001-5203-6206
  • Zhan, Zhongwen
  • González Herráez, Miguel|||0000-0003-2555-2971
  • Fidalgo Martins, Hugo|||0000-0003-3927-8125
Continuous, real-time monitoring of surface seismic activity around the globe is of great interest for acquiring new insight in global tomography analyses and for recognition of seismic patterns leading to potentially hazardous situations. The already-existing telecommunication fiber optic network arises as an ideal solution for this application, owing to its ubiquity and the capacity of optical fibers to perform distributed, highly sensitive monitoring of vibrations at relatively low cost (ultra-high density of point sensors available with minimal deployment of new equipment). This perspective article discusses early approaches on the application of fiber-optic distributed acoustic sensors (DAS) for seismic activity monitoring. The benefits and potential impact of DAS technology in this kind of applications are here illustrated with new experimental results on teleseism monitoring based on a specific approach: the so-called chirped-pulse DAS. This technology offers promising prospects for the field of seismic tomography due to its appealing properties in terms of simplicity, consistent sensitivity across sensing channels and robustness. Furthermore, we also report on several signal processing techniques readily applicable to chirped-pulse DAS recordings for extracting relevant seismic information from ambient acoustic noise. The outcome presented here may serve as foundation for a novel conception for ubiquitous seismic monitoring with minimal investment., European Commission, Comunidad de Madrid, Ministerio de Economía y Competitividad, Agencia Estatal de Investigación, Ministerio de Ciencia e Innovación
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

High-quality, InN-based, saturable absorbers for ultrafast laser development

  • Monroy Lafuente, Laura|||0000-0002-1764-2267
  • Jiménez Rodríguez, Marco
  • Monroy, Eva
  • González Herráez, Miguel|||0000-0003-2555-2971
  • Naranjo Vega, Fernando Bernabé|||0000-0002-2119-6749
New fabrication methods are strongly demanded for the development of thin‐film saturable absorbers with improved optical properties (absorption band, modulation depth, nonlinear optical response). In this sense, we investigate the performance of indium nitride (InN) epitaxial layers with low residual carrier concentration (<1018 cm−3), which results in improved performance at telecom wavelengths (1560 nm). These materials have demonstrated a huge modulation depth of 23% and a saturation fluence of 830 μJ/cm2, and a large saturable absorption around −3 × 104 cm/GW has been observed, attaining an enhanced, nonlinear change in transmittance. We have studied the use of such InN layers as semiconductor saturable absorber mirrors (SESAMs) for an erbium (Er)‐doped fiber laser to perform mode‐locking generation at 1560 nm. We demonstrate highly stable, ultrashort (134 fs) pulses with an energy of up to 5.6 nJ., Comunidad de Madrid, Agencia Estatal de Investigación, Ministerio de Economía y Competitividad
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Contribución de congreso (ConferenceOutput)

Distributed Detection of Optical Radiation using Chirped-Pulse Phase-Sensitive Optical Time Domain Reflectometry

  • Teixeira Magalhaes, Regina Manuela
  • García Ruiz, Andrés|||0000-0002-6583-5303
  • Fidalgo Martins, Hugo|||0000-0003-3927-8125
  • Pereira, João
  • Margulis, Walter
  • Martín López, Sonia|||0000-0001-5203-6206
  • González Herráez, Miguel|||0000-0003-2555-2971
26ª edición del congreso internacional Optical Fiber Sensors (OFS26), 24/09/2018-28/09/2018, Lausanne, Suiza., A distributed bolometer operating over transparent-coated and carbon-coated optical fibers is proposed. The detection of light with irradiance sensitivities of in the order of 1% of the reference solar irradiance is readily demonstrated., European Commission, Ministerio de Economía y Competitividad, Comunidad de Madrid
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Fully distributed optical fiber strain sensor with 10-12 ε/√Hz sensitivity

  • Pereira da Costa, Luis Duarte|||0000-0001-5254-0605
  • Fidalgo Martins, Hugo|||0000-0003-3927-8125
  • Martín López, Sonia|||0000-0001-5203-6206
  • Fernández Ruiz, María Del Rosario|||0000-0003-3561-2405
  • González Herráez, Miguel|||0000-0003-2555-2971
Advanced optical fiber reflectometry techniques enable spatially distributed measurements of true relative deformations over the length of a conventional optical fiber cable. This methodology is attractive for many applications ranging from intrusion monitoring to seismology. However, accurate quantification of the applied stimulus in general implies sophisticated implementations with poor sensitivity performance. Coherent reflectometry using chirped pulses is an appealing solution, as it provides fast dynamic strain measurements with a simple experimental deployment. Here, we analyze for the first time to our knowledge the lower performance bounds of this technique as a function of the signal-to-noise ratio of the acquired optical signal. We demonstrate that implementations realized so far have been limited by the temporal sampling used instead of the optical signal quality. Through post-processing interpolation approaches, we reach the performance limit for a given set of signal parameters, attaining unprecedented strain sensitivities (?10?12epsilon/?Hz) for km-length distributed sensors in conventional single-mode fibers., European Commission, Ministerio de Economía y Competitividad
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Single-shot distributed temperature and strain tracking using direct detection phase-sensitive OTDR with chirped pulses

  • Pastor Graells, Juan
  • Fidalgo Martins, Hugo|||0000-0003-3927-8125
  • García Ruiz, Andrés|||0000-0002-6583-5303
  • Martín López, Sonia|||0000-0001-5203-6206
  • González Herráez, Miguel|||0000-0003-2555-2971
So far, the optical pulses used in phase-sensitive OTDR (ΦOTDR) were typically engineered so as to have a constant phase along the pulse. In this work, it is demonstrated that by acting on the phase profile of the optical pulses, it is possible to introduce important conceptual and practical changes to the traditional ΦOTDR operation, thus opening a door for new possibilities which are yet to be explored. Using a ΦOTDR with linearly chirped pulses and direct detection, the distributed measurement of temperature/strain changes from trace to trace, with 1mK/4nε resolution, is theoreticaly and experimentaly demonstrated. The measurand resolution and sensitivity can be tuned by acting on the pulse chirp profile. The technique does not require a frequency sweep, thus greatly decreasing the measurement time and complexity of the system, while maintaining the potential for metric spatial resolutions over tens of kilometers as in conventional ΦOTDR. The technique allows for measurements at kHz rates, while maintaining reliability over several hours., European Commission, Ministerio de Economía y Competitividad, Comunidad de Madrid
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Simple Baseband Method for the Distributed Analysis of Brillouin Phase-Shift Spectra

  • López Gil, Alexia Inés
  • Angulo Vinuesa, Xabier
  • Domínguez López, Alejandro|||0000-0001-6065-6106
  • Martín López, Sonia|||0000-0001-5203-6206
  • González Herráez, Miguel|||0000-0003-2555-2971
The phase shift feature of stimulated Brillouin scattering is rarely used for the development of sensors based on the Brillouin optical time-domain analysis (BOTDA). However, this feature shows significant interest for sensing thanks to its linear dependence around the Brillouin frequency shift. Until now, distributed Brillouin phase shift (BPS) measurements required complex modulations, high-bandwidth detection, and sharp filtering. Recently, we introduced the possibility of developing simple distributed measurements of BPS in BOTDA using the baseband technology. The basic idea was the use of a Sagnac interferometer coupled to a conventional BOTDA without filtering and incorporating balanced detection. Although the concept was demonstrated, the setup proposed (using a 2 × 2 optical coupler) had significant shortcomings, the main one being its lack of stability due to the need of setting the interferometer bias through the polarization of the interacting waves. This restricted severely the practicality of the method. In this letter, we propose a setup with enhanced stability thanks to the use of a 3 × 3 optical coupler. With this configuration, the impact of the drifts along the measurement is strongly reduced, and the quality of the measurements improves substantially. The method is theoretically studied and demonstrated experimentally., European Commission, Ministerio de Economía y Competitividad, Comunidad de Madrid
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Contribución de congreso (ConferenceOutput)

A new ultrafast and high peak power fiber laser operating at 1.5 μm using In N as Saturable Absorber

  • Jiménez Rodríguez, Marco
  • Monteagudo Lerma, Laura
  • Monroy, Eva
  • Naranjo Vega, Fernando Bernabé|||0000-0002-2119-6749
  • González Herráez, Miguel|||0000-0003-2555-2971
This work describes a novel ultrafast (<250 fs) fiber laser operating at 1.5 μm and based on InN as saturable absorber (SA). This SA accommodates much higher fluencies than comparable semiconductor or graphene-based SAs, Ministerio de Economía y Competitividad, Comunidad de Madrid, Universidad de Alcalá
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Phase-measuring time-gated BOCDA

  • López Gil, Alexia Inés
  • Martín López, Sonia|||0000-0001-5203-6206
  • González Herráez, Miguel|||0000-0003-2555-2971
We demonstrate a simple scheme that allows performing distributed Brillouin phase spectrum (BPS) measurements with very high spatial resolution (~7 cm) over long (~4.7 km) optical fibers. This is achieved by inserting a Sagnac interferometer (SI) in a Brillouin optical correlation domain analysis (BOCDA) configuration. Over its already-presented time-domain equivalent (SI-BOTDA), this approach reduces the main source of noise (coherent backscatter noise) thanks to the low-coherence nature of the used signals. On the other hand, over the most usual schemes used for distributed BPS measurements, this implementation presents the key advantage of not requiring high-bandwidth detection or complex modulation while reaching unprecedented values of spatial resolution and number of resolved points for this type of measurement. Thanks to the linear dependence of the BPS feature around the Brillouin frequency shift, this scheme could also have the advantage of requiring shorter scanning ranges than amplitude-based configurations., European Commission, Ministerio de Economía y Competitividad, Comunidad de Madrid
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Contribución de congreso (ConferenceOutput)

Impact of the probe pulse shape on the performance of phase-sensitive optical time-domain reflectometry sensors

  • Fernández Ruiz, María del Rosario|||0000-0003-3561-2405
  • Fidalgo Martins, Hugo|||0000-0003-3927-8125
  • Pastor Graells, Juan
  • Martín López, Sonia|||0000-0001-5203-6206
  • González Herráez, Miguel|||0000-0003-2555-2971
25th International Conference on Optical Fiber Sensors, 2017, Jeju, Corea del Sur., In this communication, the effect of the probe pulse shape on the backscattered power trace of phase-sensitive (φ-) OTDR is analyzed. In particular, the power traces obtained with rectangular and Gaussian-like probe pulses are compared, both numerically and experimentally. Our analysis reveals that the use of Gaussian-like pulses can increase the operation range and sensitivity of φOTDR-based sensors in at least two-fold as compared with that obtained from traditionally-employed rectangular-like pulses., European Commission, Ministerio de Economía y Competitividad, Comunidad de Madrid
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Evaluation of the accuracy of BOTDA systems based on the phase spectral response

  • López Gil, Alexia Inés
  • Soto Hernández, Marcelo Alfonso
  • Angulo Vinuesa, Xabier
  • Domínguez López, Alejandro|||0000-0001-6065-6106
  • Martín López, Sonia|||0000-0001-5203-6206
  • Thévenaz, Luc
  • González Herráez, Miguel|||0000-0003-2555-2971
We evaluate the Brillouin frequency shift (BFS) determination error when utilizing the Brillouin phase spectrum (BPS) instead of the Brillouin gain spectrum (BGS) in BOTDA systems. Systems based on the BPS perform the determination of the BFS through a linear fit around the zero de-phase frequency region. An analytical expression of the error obtained in the BFS determination as a function of the different experimental parameters is provided and experimentally validated. The experimental results show a good agreement with the theoretical predictions as a function of the number of sampling points, signal-to-noise ratio (SNR) and Brillouin spectral linewidth. For an equal SNR and linewidth, the phase response only provides a better BFS estimation than the gain response when the fit is performed over a restricted frequency range around the center of the spectral profile. This may reduce the measurement time of specific BOTDA systems requiring a narrow frequency scanning. When the frequency scan covers most of the Brillouin spectral profile, gain and phase responses give very similar estimations of the BFS and the BPS offers no crucial benefit., Ministerio de Economía y Competitividad, Comunidad de Madrid, European Commission
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Study of high In-content AlInN deposition on p-Si (111) by RF-sputtering

  • Núñez Cascajero, Arántzazu
  • Monteagudo Lerma, Laura
  • Valdueza Felip, Sirona|||0000-0003-1817-5354
  • Navío, C.
  • Monroy, Eva
  • González Herráez, Miguel|||0000-0003-2555-2971
  • Naranjo Vega, Fernando Bernabé|||0000-0002-2119-6749
In this work, we investigate the effects of deposition conditions on the structural and morphological properties of AlInN thin films deposited on p-doped Si(111) substrates by reactive radio-frequency sputtering. The aluminum composition can be tuned in the 0 to 0.36 range by changing the power applied to the aluminum target. Al incorporation leads to a change in the layer morphology and improvement of the rms surface roughness of the layers. The compact Al0.36In0.64N sample grown at 550 °C exhibits intense room-temperature photoluminescence centered at 1.75 eV., Ministerio de Economía y Competitividad, Comunidad de Madrid, Universidad de Alcalá, European Commission
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Infrared SPR sensing with III-nitride dielectric layers

  • Núñez Cascajero, Arántzazu
  • Esteban Martinez, Óscar|||0000-0002-2824-6593
  • Méndez, J.A.
  • González Herráez, Miguel|||0000-0003-2555-2971
  • Naranjo Vega, Fernando Bernabé|||0000-0002-2119-6749
In this work, Aluminum Indium Nitride (AlxIn1-xN) has been used as the dielectric overlay for a surface plasmon resonance sensor. The use of a ternary compound such as AlxIn1-xN for the dielectric allows a fine tuning of its refractive index by varying its composition, thus improving the sensor performance. Narrower transmittance resonances and higher sensitivities are obtained for transducers where the substrate rotates while depositing the ternary compound, which is attributed to the deposition of ternary layers with enhanced homogeneity. The calculated average sensitivity of the devices increases when rising the Al content of the dielectric layer, it being of 4360 nm/RIU, 5230 nm/RIU and 5730 nm/RIU for 0%, 36% and 100%, respectively. The device grown with 36% of Al shows the highest coupling strength. These results show the suitability of AlxIn1-xN compounds as dielectric layers in SPR sensors., Ministerio de Economía y Competitividad, Comunidad de Madrid, Universidad de Alcalá
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

All-optical flip-flops based on dynamic Brillouin gratings in fibers

  • Soto Hernández, Marcelo Alfonso
  • Denisov, A.
  • Angulo Vinuesa, Xabier
  • Martín López, Sonia|||0000-0001-5203-6206
  • Thévenaz, Luc
  • González Herráez, Miguel|||0000-0003-2555-2971
A method to generate an all-optical flip-flop is proposed and experimentally demonstrated based on dynamic Brillouin gratings (DBGs) in polarization maintaining fibers. In a fiber with sufficiently uniform birefringence, this flip-flop can provide extremely long storage times and ultra-wide bandwidth. The experimental results demonstrate an all-optical flip-flop operation using phase-modulated pulses of 300 ps and a 1 m long DBG. This has led to a time-bandwidth product of ∼30, being in this proof-of-concept setup mainly limited by the relatively low bandwidth of the used pulses and the short fiber length., European Commission, Swiss National Science Foundation, Ministerio de Economía y Competitividad, Comunidad de Madrid
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Contribución de congreso (ConferenceOutput)

20 dB SNR enhancement in phase-sensitive OTDR using pulse stretching and recompression

  • Pastor Graells, Juan
  • Romero Cortés, Luis
  • Fidalgo Martins, Hugo|||0000-0003-3927-8125
  • Fernández Ruiz, María del Rosario|||0000-0003-3561-2405
  • Azaña, José
  • Martín López, Sonia|||0000-0001-5203-6206
  • González Herráez, Miguel|||0000-0003-2555-2971
25th International Conference on Optical Fiber Sensors, 2017, Jeju, Corea del Sur., This work shows the possibility of using chirped pulse amplification concepts in order to increase the signal-to-noise ratio (SNR) of phase sensitive optical time domain reflectometry (ΦOTDR) sensors. This method allows to increase the SNR of a ΦOTDR sensor without sacrificing spatial resolution. Here, we report a ΦOTDR sensor with a spatial resolution of 3 mm (limited only by the available detection equipment) and an SNR increase of 20 dB over the traditional architecture. To our knowledge, this is the highest-resolution ΦOTDR sensor reported to date., European Commission, Ministerio de Economía y competitividad, Comunidad de Madrid
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Contribución de congreso (ConferenceOutput)

Towards detection of pipeline integrity threats using a smart fiber optic surveillance system: PIT-STOP project blind field test results

  • Tejedor Noguerales, Javier
  • Macías Guarasa, Javier|||0000-0002-3303-3963
  • Fidalgo Martins, Hugo|||0000-0003-3927-8125
  • Piote, D.
  • Pastor Graells, Juan
  • Martín López, Sonia|||0000-0001-5203-6206
  • Corredera Guillén, Pedro
  • De Pauw, G.
  • De Smet, F.
  • Postvoll, W.
  • Ahlen, C.H.
  • González Herráez, Miguel|||0000-0003-2555-2971
25th International Conference on Optical Fiber Sensors, 2017, Jeju, Corea del Sur., This paper presents the first report on on-line and final blind field test results of a pipeline integrity threat surveillance system. The system integrates a machine+activity identification mode, and a threat detection mode. Two different pipeline sections were selected for the blind tests: One close to the sensor position, and the other 35 km away from it. Results of the machine+activity identification mode showed that about 46% of the times the machine, the activity or both were correctly identified. For the threat detection mode, 8 out of 10 threats were correctly detected, with 1 false alarm., European Commission, Ministerio de Economía y Competitividad, Comunidad de Madrid
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Speckle Analysis Method for Distributed Detection of Temperature Gradients with ΦOTDR

  • García Ruiz, Andrés|||0000-0002-6583-5303
  • Pastor Graells, Juan
  • Fidalgo Martins, Hugo|||0000-0003-3927-8125
  • Martín López, Sonia|||0000-0001-5203-6206
  • González Herráez, Miguel|||0000-0003-2555-2971
A method to extend the operation of traditional single-frequency phase-sensitive optical time-domain reflectometry (ΦOTDR) to the monitoring of distributed temperature gradients along an optical fiber is proposed and experimentally validated. The measurement principle is derived from the perturbation response of a single-wavelength ΦOTDR signal, which is analyzed as a unidimensional speckle pattern. The method could be implemented in parallel to standard ΦOTDR systems used for distributed vibration sensing with a close to zero cost and without affecting its operation, as it only requires a low computational cost post-processing of the traces which are already acquired. Frequency scanning of the laser, heterodyning or additional hardware are not required. The distributed detection of a temperature gradient of 2.5 °C over 10 min is demonstrated., European Commission, Ministerio de Economía y Competitividad, Comunidad de Madrid
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Contribución de congreso (ConferenceOutput)

> 10 dB SNR Enhancement in Distributed Acoustic Sensors through First Order Phase Noise Cancellation

  • Fernández Ruiz, María del Rosario|||0000-0003-3561-2405
  • Pastor Graells, Juan
  • Fidalgo Martins, Hugo|||0000-0003-3927-8125
  • García Ruiz, Andrés|||0000-0002-6583-5303
  • Martín López, Sonia|||0000-0001-5203-6206
  • González Herráez, Miguel|||0000-0003-2555-2971
The Optical Networking and Communication Conference & Exhibition, 11/03/2018-15/03/2018, San Diego, Estados Unidos., The performance of Rayleigh-based distributed acoustic sensors (DAS) is strongly dependent on the coherence of the laser source. We present a simple methodology to reduce the impact of the laser phase noise in chirped-pulse DAS., European Commission, Ministerio de Economía y Competitividad
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Contribución de congreso (ConferenceOutput)

Long-range, Power-efficient Distributed Flow Measurements Using Chirped-pulse Phase-sensitive Reflectometry

  • García Ruiz, Andrés|||0000-0002-6583-5303
  • Domínguez López, Alejandro|||0000-0001-6065-6106
  • Pastor Graells, Juan
  • Fidalgo Martins, Hugo|||0000-0003-3927-8125
  • Martín López, Sonia|||0000-0001-5203-6206
  • González Herráez, Miguel|||0000-0003-2555-2971
The Optical Networking and Communication Conference & Exhibition,, 11/03/2018-15/03/2018, San Diego, Estados Unidos., We demonstrate a technique allowing to perform distributed wind speed measurements over >17 km with <0.6 km/h uncertainty at only 60 mW/m of power dissipation. Applications in dynamic line rating and catenary monitoring are envisaged., European Commission, MInisterio de Economía y Competitividad, Comunidad de Madrid
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Long-range distributed optical fiber hot-wire anemometer based on chirped-pulse ΦTDR

  • García Ruiz, Andrés|||0000-0002-6583-5303
  • Domínguez López, Alejandro|||0000-0001-6065-6106
  • Pastor Graells, Juan
  • Fidalgo Martins, Hugo|||0000-0003-3927-8125
  • Martín López, Sonia|||0000-0001-5203-6206
  • González Herráez, Miguel|||0000-0003-2555-2971
We demonstrate a technique allowing to develop a fully distributed optical fiber hot-wire anemometer capable of reaching a wind speed uncertainty of ~ ± 0.15 m/s (± 0.54 km/h) at only 60 mW/m of dissipated power in the sensing fiber, and within only four minutes of measurement time. This corresponds to similar uncertainty values than previous papers on distributed optical fiber anemometry but requires two orders of magnitude smaller dissipated power and covers at least one order of magnitude longer distance. This breakthrough is possible thanks to the extreme temperature sensitivity and single-shot performance of chirped-pulse phase-sensitive optical time domain reflectometry (PhiOTDR), together with the availability of metal-coated fibers. To achieve these results, a modulated current is fed through the metal coating of the fiber, causing a modulated temperature variation of the fiber core due to Joule effect. The amplitude of this temperature modulation is strongly dependent on the wind speed at which the fiber is subject. Continuous monitoring of the temperature modulation along the fiber allows to determine the wind speed with unprecedented low power injection requirements. Moreover, this procedure makes the system immune to temperature drifts of the fiber, potentially allowing for a simple field deployment. Being a much less power-hungry scheme, this method also comfortably allows for monitoring over much longer distances, in the orders of 10s of km. We expect that this system can have application in dynamic line rating and lateral wind monitoring in railway catenary wires., European Commission, Ministerio de Economía y Competitividad, Comunidad de Madrid, Universidad de Alcalá
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Widely power-tunable polarization-independent ultrafast mode-locked fiber laser using bulk InN as saturable absorber

  • Jiménez Rodríguez, Marco
  • Monteagudo Lerma, Laura
  • Monroy, Eva
  • González Herráez, Miguel|||0000-0003-2555-2971
  • Naranjo Vega, Fernando Bernabé|||0000-0002-2119-6749
The growing demand of ultrafast mode-locked fiber lasers in the near infrared has boosted the research activity in this area. One of the most convenient ways to achieve passive mode locking consists of inserting a semiconductor saturable absorber in the laser cavity to modulate the losses. However, in such a configuration, the limited power range of operation is still an unsolved issue. Here we report the fabrication of an ultrafast, high-power, widely power-tunable and non-polarization-dependent mode-locked fiber laser operating at 1.55 μm, using an InN layer as saturable absorber. With post-amplification, this laser delivers 55-fs pulses with a repetition rate of 4.84 MHz and peak power in the range of 1 MW in an all-fiber arrangement., Ministerio de Economía y Competitividad, Comunidad de Madrid
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Contribución de congreso (ConferenceOutput)

Truly Linear and Dynamic Distributed Strain Sensor using intensity-only measurements

e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

SNR enhancement in high-resolution phasesensitive OTDR systems using chirped pulse amplification concepts

  • Pastor Graells, Juan
  • Romero Cortés, Luis
  • Fernández Ruiz, María del Rosario|||0000-0003-3561-2405
  • Fidalgo Martins, Hugo|||0000-0003-3927-8125
  • Azaña, José
  • Martín López, Sonia|||0000-0001-5203-6206
  • González Herráez, Miguel|||0000-0003-2555-2971
Phase-sensitive optical time-domain reflectometry (φOTDR) is widely used for the distributed detection of mechanical or environmental variations with resolutions of typically a few meters. The spatial resolution of these distributed sensors is related to the temporal width of the input probe pulses. However, the input pulse width cannot be arbitrarily reduced (to improve the resolution), since a minimum pulse energy is required to achieve a good level of signal-to-noise ratio (SNR), and the pulse peak power is limited by the advent of nonlinear effects. In this Letter, inspired by chirped pulse amplification concepts, we present a novel technique that allows us to increase the SNR by several orders of magnitude in φOTDR-based sensors while reaching spatial resolutions in the centimeter range. In particular, we report an SNR increase of 20 dB over the traditional architecture, which is able to detect strain events with a spatial resolution of 1.8 cm., European Commission, Ministerio de Economía y Competitividad, Comunidad de Madrid
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Contribución de congreso (ConferenceOutput)

Chirped-pulse Phase-sensitive Optical Time Domain Reflectometry

  • González Herráez, Miguel|||0000-0003-2555-2971
  • García Ruiz, Andrés|||0000-0002-6583-5303
  • Corredera Guillén, Pedro
  • Pastor Graells, Juan
  • Fernández Ruiz, María del Rosario|||0000-0003-3561-2405
  • Fidalgo Martins, Hugo|||0000-0003-3927-8125
  • Martín López, Sonia|||0000-0001-5203-6206
Asia Communications and Photonics Conference, 02/11/2016-05/11/2016, Wuhan, China., European Commission, Ministerio de Economía y Competitividad, Comunidad de Madrid
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Phase-sensitive OTDR probe pulse shapes robust against modulation-instability fading

  • Fernández Ruiz, María del Rosario|||0000-0003-3561-2405
  • Fidalgo Martins, Hugo|||0000-0003-3927-8125
  • Pastor Graells, Juan
  • Martín López, Sonia|||0000-0001-5203-6206
  • González Herráez, Miguel|||0000-0003-2555-2971
Typical phase-sensitive optical time-domain reflectometry (ϕOTDR) schemes rely on the use of coherent rectangular-shaped probe pulses. In these systems, there is a trade-off between the signal-to-noise ratio (SNR), spatial resolution, and operating range of the ϕOTDR system. To increase any of these parameters, an increase in the pulse peak power is usually indispensable. However, as it is well known, there is a limit in the allowable increase in probe power due to the onset of undesired nonlinear effects such as modulation instability. In this Letter, we perform an analysis of the effect of the probe pulse shape on the visibility fading due to modulation instability. In particular, four different temporal profiles are chosen: rectangular, Gaussian, triangular, and super-Gaussian (order 2). Our numerical and experimental analyses reveal that the use of triangular or Gaussian-like pulses can significantly inhibit the visibility fading issues. As such, an increase in the range up to twofold for the same pulse energy (i.e., SNR) and nominal spatial resolution can be achieved, as compared with the results obtained when using rectangular pulses. This is due to a more robust behavior of the Gaussian and triangular pulses against the Fermi–Pasta–Ulam recurrence occurring in modulation instability., Comunidad de Madrid, Ministerio de Economía y Competitividad, European Commission
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico antes de ser publicado, versión del autor (Preprint)

Development of AlInN photoconductors deposited by sputtering

  • Núñez Cascajero, Arántzazu
  • Jiménez Rodríguez, Marco
  • Monroy, Eva
  • González Herráez, Miguel|||0000-0003-2555-2971
  • Naranjo Vega, Fernando Bernabé|||0000-0002-2119-6749
In this work, we have developed photoconductor devices based on Al0.39In0.61N layers grown on sapphire by reac-tive radio-frequency magnetron sputtering. The fabricat-ed devices show a sublinear dependence of the photocur-rent as a function of the incident optical power. The above-the-band-gap responsivity reaches 7 W/A for an ir-radiance of 10 W/m2 (405 nm wavelength). The response decreases smoothly for below-the-bandgap excitation, dropping by more than an order of magnitude at 633 nm. The devices present persistent photoconductivity effects associated to carrier trapping at grain boundaries., Ministerio de Economía y Competitividad, Comunidad de Madrid, Universidad de Alcalá
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Sidelobe apodization in optical pulse compression reflectometry for fiber optic distributed acoustic sensing

  • Mompó, J.J.
  • Martín López, Sonia|||0000-0001-5203-6206
  • González Herráez, Miguel|||0000-0003-2555-2971
  • Loayssa, A.
We demonstrate a technique to reduce the sidelobes in optical pulse compression reflectometry for distributed acoustic sensing. The technique is based on using a Gaussian probe pulse with linear frequency modulation. This is shown to improve the sidelobe suppression by 13 dB compared to the use of square pulses without any significant penalty in terms of spatial resolution. In addition, a 2.25 dB enhancement in signal-to-noise ratio is calculated compared to the use of receiver-side windowing. The method is tested by measuring 700 Hz vibrations with a 140 nϵ amplitude at the end of a 50 km fiber sensing link with 34 cm spatial resolution, giving a record 147,058 spatially resolved points., European Commission, Ministerio de Economía y Competitividad, Comunidad de Madrid
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Real field deployment of a smart fiber optic surveillance system for pipeline integrity threat detection: architectural issues and blind field test results

  • Tejedor Noguerales, Javier
  • Macías Guarasa, Javier|||0000-0002-3303-3963
  • Fidalgo Martins, Hugo|||0000-0003-3927-8125
  • Pastor Graells, Juan
  • Martín López, Sonia|||0000-0001-5203-6206
  • Corredera Guillén, Pedro
  • De Pauw, G.
  • De Smet, F.
  • Postvoll, W.
  • Ahlen, C.H.
  • González Herráez, Miguel|||0000-0003-2555-2971
This paper presents an on-line augmented surveillance system that aims to real time monitoring of activities along a pipeline. The system is deployed in a fully realistic scenario and exposed to real activities carried out in unknown places at unknown times within a given test time interval (socalled blind field tests). We describe the system architecture that includes specific modules to deal with the fact that continuous on-line monitoring needs to be carried out, while addressing the need of limiting the false alarms at reasonable rates. To the best or our knowledge, this is the first published work in which a pipeline integrity threat detection system is deployed in a realistic scenario (using a fiber optic along an active gas pipeline) and is thoroughly and objectively evaluated in realistic blind conditions. The system integrates two operation modes: The machine+activity identification mode identifies the machine that is carrying out a certain activity along the pipeline, and the threat detection mode directly identifies if the activity along the pipeline is a threat or not. The blind field tests are carried out in two different pipeline sections: The first section corresponds to the case where the sensor is close to the sensed area, while the second one places the sensed area about 35 km far from the sensor. Results of the machine+activity identification mode showed an average machine+activity classification rate of 46:6%. For the threat detection mode, 8 out of 10 threats were correctly detected, with only 1 false alarm appearing in a 55:5-hour sensed period., European Commission, Ministerio de Economía y Competitividad, Comunidad de Madrid
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

In-rich AlxIn1-xN grown by RF-sputtering on sapphire: From closely-packed columnar to high-surface quality compact layers

  • Núñez Cascajero, Arántzazu
  • Valdueza Felip, Sirona|||0000-0003-1817-5354
  • Monteagudo Lerma, Laura
  • Monroy, Eva
  • Taylor-Shaw, E.
  • Martin, R.W.
  • González Herráez, Miguel|||0000-0003-2555-2971
  • Naranjo Vega, Fernando Bernabé|||0000-0002-2119-6749
The structural, morphological, electrical and optical properties of In-rich AlxIn1-xN (0 < x < 0.39) layers grown by reactive radio-frequency (RF) sputtering on sapphire are investigated as a function of the deposition parameters. The RF power applied to the aluminum target (0 W-150 W) and substrate temperature (300 °C-550 °C) are varied. X-ray diffraction measurements reveal that all samples have a wurtzite crystallographic structure oriented with the c-axis along the growth direction. The aluminum composition is tuned by changing the power applied to the aluminum target while keeping the power applied to the indium target fixed at 40 W. When increasing the Al content from 0 to 0.39, the room-temperature optical band gap is observed to blue-shift from 1.76 eV to 2.0 eV, strongly influenced by the Burstein-Moss effect. Increasing the substrate temperature, results in an evolution of the morphology from closely-packed columnar to compact. For a substrate temperature of 500 °C and RF power for Al of 150 W, compact Al0.39In0.61N films with a smooth surface (root-mean-square surface roughness below 1 nm) are produced., European Commission, Ministerio de Economía y Competitividad, Comunidad de Madrid, Universidad de Alcalá
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Contribución de congreso (ConferenceOutput)

Sub-250 fs, 650 kW Peak Power Harmonic Mode-Locked Fiber Laser with InN-based SESAM

  • Gallazzi, Francesca
  • Jiménez Rodríguez, Marco
  • Monroy, Eva
  • Corredera Guillén, Pedro
  • González Herráez, Miguel|||0000-0003-2555-2971
  • Naranjo Vega, Fernando Bernabé|||0000-0002-2119-6749
  • Ania Castañón, Juan Diego
43rd. European Conference on Optical Communication (ECOC 2017), Gothemburg, 17-21 Sept., We demonstrate ultrafast harmonically mode-locked fiber lasing in up to 6-km-long rings at 1.56μm with InN SESAM. Fundamental mode-locking with pulse width of 239fs, pulse energy of 155nJ and peak power of 650kW is achieved with a 1-km-long cavity., European Commission, Ministerio de Economía y Competitividad, Comunidad de Madrid
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Contribución de congreso (ConferenceOutput)

Study of Absorption Saturation in InN Thin Films through the Z-Scan Technique at 1.55 μm

  • Jiménez Rodríguez, Marco
  • Monroy Lafuente, Laura|||0000-0002-1764-2267
  • Núñez Cascajero, Arántzazu
  • Monroy, Eva
  • González Herráez, Miguel|||0000-0003-2555-2971
  • Naranjo Vega, Fernando Bernabé|||0000-0002-2119-6749
Novel Optical Materials and Applications 2018, 2–5 July 2018, Zurich Switzerland., We investigate the nonlinear absorption saturation effect of thin InN films at 1.55 μm through the z-scan technique, varying the pumping peak intensity. Over 30 % nonlinear change in sample transmittance has been estimated, Ministerio de Economía y Competitividad, Comunidad de Madrid
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Fiber-based distributed bolometry

  • Teixeira Magalhaes, Regina Manuela
  • García Ruiz, Andrés|||0000-0002-6583-5303
  • Fidalgo Martins, Hugo|||0000-0003-3927-8125
  • Pereira, João
  • Margulis, Walter
  • Martín López, Sonia|||0000-0001-5203-6206
  • González Herráez, Miguel|||0000-0003-2555-2971
Optical fibers are inherently designed to allow no interaction between the guided light and the surrounding optical radiation. Thus, very few optical fiber-based technologies exist in the field of optical radiation sensing. Accomplishing fully-distributed optical radiation sensing appears then as even more challenging since, on top of the lack of sensitivity explained above, we should add the need of addressing thousands of measurement points in a single, continuous optical cable. Nevertheless, it is clear that there exist a number of applications which could benefit from such distributed sensing scheme, particularly if the sensitivity was sufficiently high to be able to measure correctly variations in optical radiation levels compatible with the earth surface. Distributed optical radiation sensing over large distances could be employed in applications such as Dynamic Line Rating (DLR), where it is known that solar radiation can be an important limiting factor in energy transmission through overhead power cables, and also in other applications such as thermo-solar energy. In this work, we present the proof-of-concept of the first distributed bolometer based on optical fiber technology and capable of detecting absolute changes of irradiance. The core idea of the system is the use of a special fiber coating with high emissivity (e.g. carbon coating or black paint). The high absorption of these coatings translates into a temperature change that can be read with sufficiently high sensitivity using phase-sensitive reflectometry. To demonstrate the concept, we interrogate distinct black-coated optical fibers using a chirped-pulse PhiOTDR, and we readily demonstrate the detection of light with resolutions in the order of 1% of the reference solar irradiance, offering a high potential for integration in the aforementioned applications., European Commission, Ministerio de Economía y Competitividad, Comunidad de Madrid
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Contribución de congreso (ConferenceOutput)

Code length limit in phase-sensitive OTDR using ultralong (>1M bits) pulse sequences due to fading induced by fiber optical path drifts

  • Fidalgo Martins, Hugo|||0000-0003-3927-8125
  • Shi, K.
  • Thomsen, B.C.
  • Martín López, Sonia|||0000-0001-5203-6206
  • González Herráez, Miguel|||0000-0003-2555-2971
  • Savory, S.J.
Recently, it has been demonstrated that by recovering the amplitude and phase of the backscattered optical signal, a ΦOTDR using pulse coding can be treated as a fully linear system in terms of trace coding/decoding, thus allowing for the use of tens of thousands of bits with a dramatic improvement of the system performance. In this communication, as a continuation of previous work by the same authors, a preliminary study aiming at characterizing the limits of the system in terms of maximum usable code length is presented. Using a code exceeding 1million bits over a duration of 0.26ms, it is observed that fiber optical path variations exceeding π occurring over a time inferior to the pulse code length can lead to localized fading in the ΦOTDR trace. The occurrence, positions and form of the fading points along the ΦOTDR trace is observed to be strongly dependent on the type, frequency and amplitude of the perturbations applied to the fiber., European Commission, Ministerio de Economía y Competitividad, Comunidad de Madrid
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Resolving 1 million sensing points in an optimized differential time‐domain Brillouin sensor

  • Domínguez López, Alejandro|||0000-0001-6065-6106
  • Soto Hernández, Marcelo Alfonso
  • Martín López, Sonia|||0000-0001-5203-6206
  • Thévenaz, Luc
  • González Herráez, Miguel|||0000-0003-2555-2971
A differential pulse-width pair (DPP) Brillouin distributed fiber sensor is implemented to achieve centimetric spatial resolution over distances of several kilometers. The presented scheme uses a scanning method in which the spectral separation between the two probe sidebands is kept constant, while the optical frequency of the pump is swept to scan the Brillouin spectral response. Experimental results show that this method avoids detrimental temporal distortions of the pump pulses, which in a standard implementation prevent the DPP method from operating over mid-to-long distances. Such a novel scanning procedure allows the resolving, for the first time in pure time-domain Brillouin sensors, of 1,000,000 sensing points, i.e., 1 cm spatial resolution over 10 km in a conventional acquisition time., European Commission, Ministerio de Economía y Competitividad, Comunidad de Madrid
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico antes de ser publicado, versión del autor (Preprint)

Chirped-pulse Phase-sensitive Reflectometer Assisted by First Order Raman Amplification

  • Pastor Graells, Juan
  • García Ruiz, Andrés|||0000-0002-6583-5303
  • Martín López, Sonia|||0000-0001-5203-6206
  • González Herráez, Miguel|||0000-0003-2555-2971
  • Nuño del Campo, Javier
  • Fernández Ruiz, María del Rosario|||0000-0003-3561-2405
  • Fidalgo Martins, Hugo|||0000-0003-3927-8125
The use of linearly chirped probe pulses in phase sensitive-(Phi)OTDR technology has been recently demonstrated to allow for high-resolution, quantitative and dynamic temperature or strain variation measurements in a simple and very robust manner. This new sensing technology, known as chirped-pulse PhiOTDR, had a maximum reported sensing range of 11 km. In this paper, a 75 km sensing range with 10 m spatial resolution is demonstrated by using bidirectional first order Raman amplification. The system is capable of performing truly linear, single-shot measurements of strain perturbations with an update rate of 1 kHz and 1 nepsilon resolution. The time-domain trace of the sensor exhibits a signal to noise ratio (SNR) in the worst point of >3 dB, allowing to monitor vibrations up to 500 Hz with remarkable accuracy. To demonstrate the capabilities of the proposed system, we apply 20 dB (with only 300 ms analysis window and no post-processing) and no evidence of nonlinearity in the acoustic response. The optical nonlinear effects that the probe pulse could suffer along the sensing fiber are thoroughly studied, paying special attention to potential distortions of the pulse shape, particularly in its instantaneous frequency profile. Our analysis reveals that, for proper values of peak power, the pulse does not suffer any major distortion and therefore the system performance is not compromised., European Commission, Ministerio de Economía y Competitividad, Comunidad de Madrid
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Contribución de congreso (ConferenceOutput)

A novel fiber optic based surveillance system for prevention of pipeline integrity threats

  • Tejedor Noguerales, Javier
  • Macías Guarasa, Javier|||0000-0002-3303-3963
  • Fidalgo Martins, Hugo|||0000-0003-3927-8125
  • Piote, D.
  • Pastor Graells, Juan
  • Martín López, Sonia|||0000-0001-5203-6206
  • Corredera Guillén, Pedro
  • González Herráez, Miguel|||0000-0003-2555-2971
This paper presents a novel surveillance system aimed at the detection and classification of threats in the vicinity of a long gas pipeline. The sensing system is based on phase-sensitive optical time domain reflectometry (φ-OTDR) technology for signal acquisition and pattern recognition strategies for threat identification. The proposal incorporates contextual information at the feature level and applies a system combination strategy for pattern classification. The contextual information at the feature level is based on the tandem approach (using feature representations produced by discriminatively-trained multi-layer perceptrons) by employing feature vectors that spread different temporal contexts. The system combination strategy is based on a posterior combination of likelihoods computed from different pattern classification processes. The system operates in two different modes: (1) machine + activity identification, which recognizes the activity being carried out by a certain machine, and (2) threat detection, aimed at detecting threats no matter what the real activity being conducted is. In comparison with a previous system based on the same rigorous experimental setup, the results show that the system combination from the contextual feature information improves the results for each individual class in both operational modes, as well as the overall classification accuracy, with statistically-significant improvements., European Commission, Ministerio de Economía y Competitividad, Comunidad de Madrid
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Quality improvement of AlInN/p-Si heterojunctions with AlN buffer layer deposited by RF-sputtering

  • Núñez Cascajero, Arántzazu
  • Valdueza Felip, Sirona|||0000-0003-1817-5354
  • Blasco Chicano, Rodrigo
  • Mata Fernández, María de la
  • Molina Rubio, Sergio Ignacio
  • González Herráez, Miguel|||0000-0003-2555-2971
  • Monroy, Eva
  • Naranjo Vega, Fernando Bernabé|||0000-0002-2119-6749
The effect of an AlN buffer layer thickness on the structural, morphological and optical properties of n- Al0.37In0.63N deposited on p-Si (111) by radio-frequency sputtering was studied. The AlN/ Al0.37In0.63N samples were structurally characterized via X-ray diffraction and high-resolution transmission electron microscopy showing that all layers present wurtzite structure highly oriented along the c-axis with no phase separation. All the samples present compact morphology with root-mean-square surface roughness below 1.7 nm and low-temperature photoluminescence emission centered at 1.8 eV. The presence of the buffer layer leads to an improvement of the structural quality, evidenced by a reduction of the full width at half maximum of the rocking curve around the (0002) AlInN reflection from 8° to 5°. Selected samples were processed and tested as solar cells showing a good rectifying behavior in the dark and an open circuit voltage of 0.35 V, a short circuit current density of 22.2 mA/cm2 and fill factor of 20% under 1 sun AM1.5G illumination., Ministerio de Economía y Competitividad, Comunidad de Madrid, Universidad de Alcalá
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Contribución de congreso (ConferenceOutput)

A Gaussian Mixture Model-Hidden Markov Model (GMM-HMM)-based fiber optic surveillance system for pipeline integrity threat detection

  • Tejedor Noguerales, Javier
  • Macías Guarasa, Javier|||0000-0002-3303-3963
  • Fidalgo Martins, Hugo|||0000-0003-3927-8125
  • Martín López, Sonia|||0000-0001-5203-6206
  • González Herráez, Miguel|||0000-0003-2555-2971
26th International Conference on Optical Fiber Sensors OFS-26, 24/09/2018-28/09/2018, Lausanne, Suiza., A pipeline integrity threat detection system using Distributed Acoustic Sensing and Artificial Intelligence (AI) is presented. The AI uses a combination of Gaussian Mixture Models and Hidden Markov Models (GMMs-HMMs), outperforming our former GMM-based system., European Commission, Ministerio de Economía y Competitividad, Comunidad de Madrid, Universidad de Alcalá
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Contribución de congreso (ConferenceOutput)

Statistical Analysis of SNR in Chirped-pulse ΦOTDR

  • Fernández Ruiz, María del Rosario|||0000-0003-3561-2405
  • Fidalgo Martins, Hugo|||0000-0003-3927-8125
  • Pereira da Costa, Luis Duarte|||0000-0001-5254-0605
  • Martín López, Sonia|||0000-0001-5203-6206
  • González Herráez, Miguel|||0000-0003-2555-2971
26th International Conference on Optical Fiber Sensors OFS-26, 24/09/2018-28/09/2018, Lausanne, Suiza., The statistical properties of SNR are analyzed for chirped-pulse (CP-)ΦOTDR and compared with traditional ΦOTDR using coherent-detection. CP- ΦOTDR is showed to have drastically narrower (lower variance) SNR distribution, thus providing higher reliability measurements., European Commission, Ministerio de Economía y Competitividad, Comunidad de Madrid
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Contribución de congreso (ConferenceOutput)

Reaching pε/√Hz sensitivity in a distributed optical fiberstrain sensor

  • Pereira da Costa, Luis Duarte|||0000-0001-5254-0605
  • Fidalgo Martins, Hugo|||0000-0003-3927-8125
  • Martín López, Sonia|||0000-0001-5203-6206
  • Fernández Ruiz, María del Rosario|||0000-0003-3561-2405
  • González Herráez, Miguel|||0000-0003-2555-2971
26th International Coference on Optical Fiber Sensors OFS-26, 24/09/2018-28/09/2018, Lausanne, Suiza., Chirped-pulse ΦOTDR provides distributed strain measurement via a time-delay estimation process. We propose a lower bound for performance, after reducing sampling error and compensating phase-noise. We attempt to reach the limit, attaining unprecedented pε/√Hz sensitivities., European Commission, Ministerio de Economía y Competitividad, Comunidad de Madrid
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Laser phase-noise cancellation in chirped-pulse distributed acoustic sensors

e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Contribución de congreso (ConferenceOutput)

Chirped-pulse phase-sensitive reflectometry

  • Pastor Graells, Juan
  • García Ruiz, Andrés|||0000-0002-6583-5303
  • Fernández Ruiz, María del Rosario|||0000-0003-3561-2405
  • Fidalgo Martins, Hugo|||0000-0003-3927-8125
  • Martín López, Sonia|||0000-0001-5203-6206
  • González Herráez, Miguel|||0000-0003-2555-2971
X Reunión Española de Optoelectrónica (OPTOEL17), 12/07/2017-14/07/2017, Santiago de Compostela, España., In this work, a new distributed fiber sensor named chirped-pulse phase-sensitive OTDR is presented. It is based on a phase-sensitive OTDR using direct detection and linearly chirped pulses. The new sensor allows the dynamic and quantitative measurement of temperature/strain changes, with mK/nå resolution. The technique does not require a frequency sweep or coherent detection. It is presented the fundamentals of the sensor and measurements of temperature, vibrations and music., European Commission, Ministerio de Economía y Competitividad, Comunidad de Madrid
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Contribución de congreso (ConferenceOutput)

Distributed gas detection along microstructured optical fibers through photothermal absorption

  • García Ruiz, Andrés|||0000-0002-6583-5303
  • Pastor Graells, Juan
  • Fidalgo Martins, Hugo|||0000-0003-3927-8125
  • Hey Tow, Kenny
  • Thévenaz, Luc
  • Martín López, Sonia|||0000-0001-5203-6206
  • González Herráez, Miguel|||0000-0003-2555-2971
X Reunión Española de Optoelectrónica (OPTOEL17), 12/07/2017-14/07/2017, Santiago de Compostela, España., Chirped-pulse phase-sensitive optical time domain reflectometry has shown a remarkable performance when applied to dynamic measurements of strain and temperature, recently reaching ranges of several kilometers while interrogating the fiber at acoustic frequencies. In this work, its sensitivity, fast response, and high spatial resolution are exploited to demonstrate the reliability of a selective distributed chemical sensor based on the photothermal effect. The presented scheme performs distributed spectroscopic detection of acetylene along a holey fiber. This potentially gives rise to a new kind of distributed chemical sensors able to track the concentration of chemical species over kilometres., European Commission, Ministerio de Economía y Competitividad, Comunidad de Madrid
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Effect of the residual doping on the performance of InN epilayers as saturable absorbers for ultrafast lasers at 1.55µm

  • Monroy Lafuente, Laura|||0000-0002-1764-2267
  • Jiménez Rodríguez, Marco
  • Ruterana, Pierre
  • Monroy, Eva
  • González Herráez, Miguel|||0000-0003-2555-2971
  • Naranjo Vega, Fernando Bernabé|||0000-0002-2119-6749
We report on the improvement of performance of InN-based saturable absorbers in fiber lasers operating at 1.55 mum by reducing the residual doping, due to the lower Burstein-Moss effect. The improved tuning of the band-to-band transition with respect to the operation wavelength leads to an enhancement of nonlinear optical effects, resulting in 30 % of modulation depth. We introduce the development of an ultrafast mode-locked fiber laser using an improved InN-based saturable absorber that incorporates a buffer layer between the active layer and the substrate. The laser delivers output pulses with a temporal width of 220 fs, a repetition rate of 5.25 MHz, and high-pulse energy of 5.8 nJ., Ministerio de Economía, Industria y Competitividad, Ministerio de Ciencia, Innovación y Universidades, Comunidad de Madrid
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Contribución de congreso (ConferenceOutput)

Moduladores de fase en fibra basados en calentamiento Joule sobre fibras cubiertas de carbono

  • García Ruiz, Andrés|||0000-0002-6583-5303
  • Fidalgo Martins, Hugo|||0000-0003-3927-8125
  • Teixeira Magalhaes, Regina Manuela
  • Pereira, João
  • Margulis, Walter
  • Martín López, Sonia|||0000-0001-5203-6206
  • González Herráez, Miguel|||0000-0003-2555-2971
VII Jornadas de Jóvenes Investigadores de la Universidad de Alcalá. Alcalá de Henares, el 12 y 13 de diciembre de 2018., Ciertas aplicaciones de los sistemas de fibra óptica, como los sensores, la aviónica o el ámbito biomédico, implican condiciones extremas de humedad, presión o temperatura. Esto hace necesario el desarrollo de dispositivos de fibra dotados de un recubrimiento hermético al agua e hidrógeno. En este artículo se motiva la necesidad de estos dispositivos y se presenta un modulador de fase a modo de ejemplo y prueba de concepto., Certain applications of fiber sensors (eg. avionics, oil industry) imply extreme operating conditions spurring the development of hermetic all-fiber devices. We present a hermetic all-fiber phase modulator based on Joule heating in a carbon-coated fiber., European Commission, Ministerio de Economía y Competitividad
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Dynamic measurements of 1000 microstrains using chirped-pulse phase-sensitive optical time-domain reflectometry

  • Bhatta, Hari
  • Pereira da Costa, Luis Duarte|||0000-0001-5254-0605
  • García Ruiz, Andrés|||0000-0002-6583-5303
  • Fernández Ruiz, María del Rosario|||0000-0003-3561-2405
  • Fidalgo Martins, Hugo|||0000-0003-3927-8125
  • Tur, Moshe
  • González Herráez, Miguel|||0000-0003-2555-2971
This work demonstrates the capabilities of Chirped pulse, phase-sensitive optical time domain reflectometry (CP-PhiOTDR) to measure large dynamic strains. Benefitting from the use of incoherent detection and single shot measurements, this technique can sample the fiber under test at rates limited only by the fiber length. Yet, for large strains it relies on incremental measurements, where each trace is cross-correlated with its predecessor to determine the relative change of strain. The individual increments are then integrated to provide the strain at the spatial point of measurement. Here, a 4 m section (out of a 210 m spool) was subjected to longitudinal vibration by a mechanical shaker. With a pulse repetition rate of 200 kHz, we present, for the first time to our knowledge, Rayleigh backscattering based distributed measurements of large and fast dynamic strains: from 150 µepsilon at a vibration frequency of 400 Hz to 1190 µepsilon (peak to peak) at 50 Hz over long single-mode fibers. Along with a detailed description of the implemented data processing, we also discuss some of the associated limitations., European Commission, Ministerio de Economía y Competitividad, Comunidad de Madrid
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Hermetic carbon coatings for electro-thermal all-fiber phase modulators

  • García Ruiz, Andrés|||0000-0002-6583-5303
  • Fidalgo Martins, Hugo|||0000-0003-3927-8125
  • Teixeira Magalhaes, Regina Manuela
  • Pereira, João
  • Tarasenko, Oleksandr
  • Norin, Lars
  • Margulis, Walter
  • Martín López, Sonia|||0000-0001-5203-6206
  • González Herráez, Miguel|||0000-0003-2555-2971
Joule effect and thermal response of several carbon-coated fibers are modelled and analysed. An electro-thermally driven all-fiber phase modulator based on these principles is proposed and a proof of concept of it is characterized. This kind of fibers could be the basis for developing all-fiber components aimed to operate in environments where the strength increase and impermeability to hydrogen diffusion guaranteed by the carbon coating is crucial., European Commission, Ministerio de Economía y Competitividad, Comunidad de Madrid
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Contribución de congreso (ConferenceOutput)

Spectrally-resolved distributed optical fibre bolometry

  • Teixeira Magalhaes, Regina Manuela
  • García Ruiz, Andrés|||0000-0002-6583-5303
  • Martín López, Sonia|||0000-0001-5203-6206
  • González Herráez, Miguel|||0000-0003-2555-2971
  • Fidalgo Martins, Hugo|||0000-0003-3927-8125
7th European Workshop on Optical Fibre Sensors (EWOFS'2019), , 01/10/2019-04/10/2019, Limassol, Chipre., We propose a fully distributed optical fiber sensor capable of performing spectrally-resolved detection of visible light radiation. The sensor is based on monitoring the temperature change between two optical fibers with different coating colors. In our implementation, the temperature is simultaneously monitored in a black-coated fiber (which is highly sensitive to all input wavelengths) and a color-coated fiber, which basically acts as an optical stop-band filter for a certain input color. By comparing the temperature behavior attained for each fiber, it is possible to obtain information of the wavelength/color of a given optical radiation present in the environment. Suitable calibration could lead to distributed colorimetry measurements., European Commission, Ministerio de Economía y Competitividad, Comunidad de Madrid, Ministerio de Ciencia e Innovación
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

A Contextual GMM-HMM Smart Fiber Optic Surveillance System for Pipeline Integrity Threat Detection

  • Tejedor Noguerales, Javier
  • Macías Guarasa, Javier|||0000-0002-3303-3963
  • Fidalgo Martins, Hugo|||0000-0003-3927-8125
  • Martín López, Sonia|||0000-0001-5203-6206
  • González Herráez, Miguel|||0000-0003-2555-2971
This paper presents a novel pipeline integrity surveillance system aimed to the detection and classification of threats in the vicinity of a long gas pipeline. The sensing system is based on phase-sensitive optical time domain reflectometry ( $\phi$ -OTDR) technology for signal acquisition and pattern recognition strategies for threat identification. The proposal incorporates contextual information at the feature level in a Gaussian Mixture Model-Hidden Markov Model (GMM-HMM)-based pattern classification system and applies a system combination strategy for acoustic trace decision. System combination relies on majority voting of the decisions given by the individual contextual information sources and the number of states used for HMM modelling. The system runs in two different modes: (1) machine+activity identification, which recognizes the activity being carried out by a certain machine, and (2) threat detection, aimed to detect threats no matter what the real activity being conducted is. In comparison with the previous systems based on the same rigorous experimental setup, the results show that the system combination from the contextual feature information and the GMM-HMM approach improves the results for both machine+activity identification (7.6% of relative improvement with respect to the best published result in the literature on this task) and threat detection (26.6% of relative improvement in the false alarm rate with 2.1% relative reduction in the threat detection rate)., European Commission, Ministerio de Economía y Competitividad, Comunidad de Madrid
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Fully distributed optical fiber strain sensor with 10−12ε/√Hz sensitivity

  • Pereira da Costa, Luis Duarte|||0000-0001-5254-0605
  • Fidalgo Martins, Hugo|||0000-0003-3927-8125
  • Martín López, Sonia|||0000-0001-5203-6206
  • Fernández Ruiz, María del Rosario|||0000-0003-3561-2405
  • González Herráez, Miguel|||0000-0003-2555-2971
Advanced optical fiber reflectometry techniques enable spatially distributed measurements of true relative deformations over the length of a conventional optical fiber cable. This methodology is attractive for many applications ranging from intrusion monitoring to seismology. However, accurate quantification of the applied stimulus in general implies sophisticated implementations with poor sensitivity performance. Coherent reflectometry using chirped pulses is an appealing solution, as it provides fast dynamic strain measurements with a simple experimental deployment. Here, we analyze for the first time to our knowledge the lower performance bounds of this technique as a function of the signal-to-noise ratio of the acquired optical signal. We demonstrate that implementations realized so far have been limited by the temporal sampling used instead of the optical signal quality. Through post-processing interpolation approaches, we reach the performance limit for a given set of signal parameters, attaining unprecedented strain sensitivities (&#8764;10&#8722;12epsilon/&#8730;Hz) for km-length distributed sensors in conventional single-mode fibers., European Commission, Ministerio de Economía y Competitividad, Comunidad de Madrid
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Contribución de congreso (ConferenceOutput)

Monitorización de actividad sísmica usando sensores distribuidos en fibra basados en φOTDR y pulsos con chirp

  • Fernández Ruiz, María del Rosario|||0000-0003-3561-2405
  • Fidalgo Martins, Hugo|||0000-0003-3927-8125
  • Williams, Ethan
  • Pereira da Costa, Luis Duarte|||0000-0001-5254-0605
  • Teixeira Magalhaes, Regina Manuela
  • Martín López, Sonia|||0000-0001-5203-6206
  • Zhan, Zhongwen
  • González Herráez, Miguel|||0000-0003-2555-2971
XI Reunión Española de Optoelectrónica (OPTOEL 2019), 03/07/2019-05/07/2019, Zaragoza, España., Actualmente, los sistemas de comunicaciones ópticas de larga distancia se basan en una extensa red de fibra óptica que se encuentra instalada alrededor del globo. En este trabajo, presentamos cómo esta red de fibra puede ser empleada para un uso alternativo: el análisis de movimientos sísmicos del planeta. Para ello, se ha utilizado la fibra como elemento sensor en un sistema de sensado distribuido basado en OTDR sensible a fase (φOTDR) usando pulsos con chirp con el que se ha detectado un terremoto de grado 8,2 ocurrido el pasado agosto en las Islas Fiji. Este terremoto se ha detectado en dos localizaciones diferentes, un entorno metropolitano en la ciudad de Pasadena (California, EEUU) y un entorno submarino en la costa de Bélgica. Usando técnicas de procesado lineales se ha podido ex-traer información del terremoto del ruido ambiente. Los resultados aquí mostrados muestran el gran potencial de la red de fibra ya instalada para su uso como sismógrafo distribuido., Ministerio de Economía y Competitividad, Comunidad de Madrid, European Commission
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Contribución de congreso (ConferenceOutput)

Sensor acústico distribuido en fibra óptica con una sensibilidad de 10-12 ε/√Hz

  • Costa, Luis
  • Fidalgo Martins, Hugo|||0000-0003-3927-8125
  • Martín López, Sonia|||0000-0001-5203-6206
  • Fernández Ruiz, María del Rosario|||0000-0003-3561-2405
  • González Herráez, Miguel|||0000-0003-2555-2971
XI Reunión Española de Optoelectrónica (OPTOEL 2019), 03/07/2019-05/07/2019, Zaragoza, España, Los avances en las técnicas de reflectometría óptica en el dominio del tiempo en fibra óptica permiten realizar mediciones completamente distribuidas de deformación dinámica sobre decenas de kilómetros. Esto es muy interesante para algunas aplicaciones que van desde la geofísica hasta la detección de intrusiones en grandes perímetros. Una solución atractiva consiste en la reflectometría coherente empleando pulsos con chirp (CP-φOTDR), debido a su implementación experimental simple y sus buenas prestaciones de sensibilidad. Este trabajo analiza los límites de sensibilidad de esta técnica, en función de las propiedades de la señal óptica obtenida. Usando técnicas de post-procesado adecuado, se demuestra experimentalmente el límite de rendimiento para el estimador empleado, alcanzando sensibilidades en la deformación de 10-12 ε/√Hz para mediciones totalmente distribuidas, a lo largo de kilómetros de fibra monomodo convencional., European Commission, Ministerio de Economía y Competitividad, Comunidad de Madrid
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Contribución de congreso (ConferenceOutput)

Medición distribuida de presencia de gases en fibras ópticas huecas mediante efecto fototérmico

  • García Ruiz, Andrés|||0000-0002-6583-5303
  • Pastor Graells, Juan
  • Fidalgo Martins, Hugo|||0000-0003-3927-8125
  • Hey Tow, Kenny
  • Thévenaz, Luc
  • Martín López, Sonia|||0000-0001-5203-6206
  • González Herráez, Miguel|||0000-0003-2555-2971
VI Jornadas de Jóvenes Investigadores de la Universidad de Alcalá. Alcalá de Henares, del 14 al 16 de diciembre de 2016, La reflectometría óptica sensible a la fase en dominio temporal (PhiOTDR) con pulsos con chirp ha demostrado prestaciones sobresalientes en su aplicación a la medición dinámica de deformaciones y temperatura mediante fibra óptica, alcanzando recientemente rangos de varios kilómetros y frecuencias de adquisición acústicas. En este trabajo, se explotan su sensibilidad, rapidez, y alta resolución espacial para la implementación de un primer sensor químico selectivo y distribuido basado en el efecto fototérmico. El esquema presentado es capaz de realizar medidas espectroscópicas distribuidas, detectando acetileno en una fibra hueca de 10 m. Esto abre la puerta a una posible nueva generación de sensores químicos distribuidos capaces de monitorizar la concentración de sustancias a lo largo de kilómetros., Chirped-pulse phase-sensitive optical time domain reflectometry has shown a remarkable performance when applied to dynamic measurements of strain and temperature, recently reaching ranges of several kilometers while interrogating the fiber at acoustic frequencies. In this work, its sensitivity, fast response, and high spatial resolution are exploited to implement a proof-of-concept of a selective distributed chemical sensor based on the photothermal effect. The presented scheme is able to perform distributed spectroscopic measurements of acetylene presence along a 10 m-long holey fiber. This potentially gives rise to a new kind of distributed chemical sensors capable of tracking the concentration of chemical species over kilometres., European Commission, Ministerio de Economía y Competitividad, Comunidad de Madrid
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Contribución de congreso (ConferenceOutput)

Sensor acústico distribuido basado en OTDR sensible a la fase y pulsos chirpeados

  • Pastor Graells, Juan
  • García Ruiz, Andrés|||0000-0002-6583-5303
  • Fernández Ruiz, María del Rosario|||0000-0003-3561-2405
  • Fidalgo Martins, Hugo|||0000-0003-3927-8125
  • Martín López, Sonia|||0000-0001-5203-6206
  • González Herráez, Miguel|||0000-0003-2555-2971
VI Jornadas de Jóvenes Investigadores de la Universidad de Alcalá. Alcalá de Henares, del 14 al 16 de diciembre de 2016., Los sensores distribuidos permiten la medición de diferentes parámetros físicos (temperatura, deformaciones, vibraciones, etc.) a lo largo de grandes distancias. Todos ellos emplean los fenómenos de scattering (Rayleigh, Brillouin, Raman) que sufre la luz al propagarse por una fibra óptica. En el presente artículo se profundizará en los sensores OTDR sensibles a la fase, ampliamente utilizados para la detección y caracterización de vibraciones. Este tipo de medidas, a lo largo de decenas de kilómetros, permiten el control de amenazas en grandes perímetros e infraestructuras civiles. Se introducirá el último avance en esta tecnología, el cual permite la realización de medidas acústicas empleando pulsos chirpeados., Distributed sensors allow for the measurement of different physical parameters (temperature, deformations, vibrations, etc.) along large distances. All of them employ scattering phenomena (Rayleigh, Brillouin, Raman) produced during the light propagation along the optical fibers. The present work will focus on the phase-sensitive OTDR, commonly used for detection and characterization of vibrations. These measurements, realized along tens of kilometers, permit the surveillance of large perimeters and civil infrastructures. It will be introduced a recent progress in this technology, which allows for distributed acoustic measurements using chirped pulses., European Commission, Ministerio de Economía y Competitividad, Comunidad de Madrid
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Contribución de congreso (ConferenceOutput)

Hydrogen and deuterium distributed sensing using Chirped-Pulse φOTDR

  • García Ruiz, Andrés|||0000-0002-6583-5303
  • Morana, Adriana
  • Fidalgo Martins, Hugo|||0000-0003-3927-8125
  • Martín López, Sonia|||0000-0001-5203-6206
  • González Herráez, Miguel|||0000-0003-2555-2971
  • Delepine-Lesoille, Sylvie
  • Boukenter, Aziz
  • Ouerdane, Youcef
  • Girard, Sylvain
7th European Workshop on Optical Fibre Sensors (EWOFS'2019), 01/10/2019-04/10/2019, Limassol, Chipre., The detection and quantification of the presence of certain chemical species is of central importance regarding permanent structural health monitoring of key industrial fields and civil infrastructures such as oil extraction boreholes or radioactive waste repositories, where H2 is released. With this work we propose and test a competitive technique able to measure the concentration of hydrogen and deuterium thanks to their diffusion into the silica glass of a standard optical fiber, already employed for the distributed monitoring of large infrastructures. The proposed technique, based on Chirped-Pulse Phasesensitive Reflectometry (CP-φOTDR), could represent a novel solution for this problem, thanks to its ability to provide dynamical measurements of refractive index change, with great linearity and sensitivities of 10-8 refractive index units, featuring spatial resolutions of a few meters and kilometric sensing ranges., European Commission, Ministerio de Economía y Competitividad, Comunidad de Madrid, Agencia Estatal de Investigación, Ministerio de Ciencia e Innovación
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Contribución de congreso (ConferenceOutput)

Characterization and modelling of induced "virtual" perturbations in chirped pulse φ-OTDR

  • Soriano Amat, Miguel|||0000-0002-4819-3898
  • Marcon, Leonardo
  • Pereira da Costa, Luis Duarte|||0000-0001-5254-0605
  • García Ruiz, Andrés|||0000-0002-6583-5303
  • Fidalgo Martins, Hugo|||0000-0003-3927-8125
  • Martín López, Sonia|||0000-0001-5203-6206
  • Palmieri, Luca
  • González Herráez, Miguel|||0000-0003-2555-2971
7th European Workshop on Optical Fibre Sensors (EWOFS'2019), 01/10/2019-04/10/2019, Limassol, Chipre., Any temperature change or strain acting on a section of the fiber induces a local variation of the refractive index. If the fiber is monitored by a chirped pulse φ-OTDR system, the variation of the refractive index causes a local shift of the backscattering trace and produces a change in the round trip time of the light coming from any further position of the fiber. While usually negligible, due to the high sensitivity of the chirped pulse φ-OTDR, in extreme occasions the distributed round trip time change may appear in the measurement as an undesired “virtual” perturbation. In this paper, we discuss and experimentally validate a mathematical model to account for (and eventually correct) the “virtual” perturbation., European Commission, Ministerio de Economía y Competitividad, Agencia Estatal de Investigación, Comunidad de Madrid, Ministerio de Ciencia e Innovación
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Contribución de congreso (ConferenceOutput)

Transforming the fiber-optic network into a dense and ultrasensitive seismic sensor array

  • García Ruiz, Andrés|||0000-0002-6583-5303
  • Teixeira Magalhaes, Regina Manuela
  • Pereira da Costa, Luis Duarte|||0000-0001-5254-0605
  • Cobo Mancheño, Javier
  • Fidalgo Martins, Hugo|||0000-0003-3927-8125
  • Fernández Ruiz, María del Rosario|||0000-0003-3561-2405
  • Martín López, Sonia|||0000-0001-5203-6206
  • González Herráez, Miguel|||0000-0003-2555-2971
20th International Conference on Transparent Optical Networks (ICTON 2018), 01/07/2018-05/07/2018, Bucarest, Rumania., We show a technology capable of performing position-resolved measurement of nanostrain perturbations along a conventional optical fiber cable, with meter-scale resolution. This technology can be deployed in already existing networks to achieve a dense and ultrasensitive seismic sensor array. Applications ranging from seismic protection to chemical sensing are explored., European Commission, Ministerio de Economía y Competitividad, Comunidad de Madrid
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Distributed detection of hydrogen and deuterium diffusion into a single-mode optical fiber with chirped-pulse phase-sensitive optical time-domain reflectometry

  • García Ruiz, Andrés|||0000-0002-6583-5303
  • Morana, Adriana
  • Pereira da Costa, Luis Duarte|||0000-0001-5254-0605
  • Fidalgo Martins, Hugo|||0000-0003-3927-8125
  • Martín López, Sonia|||0000-0001-5203-6206
  • González Herráez, Miguel|||0000-0003-2555-2971
  • Boukenter, Aziz
  • Ouerdane, Youcef
  • Girard, Sylvain
For some infrastructures like oil and gas extraction boreholes or radioactive waste repositories, where distributed optical fiber sensors are employed to grant the safety of the facilities, the presence of gas species such as hydrogen or deuterium is one more relevant parameter to monitor. The possibility of employing the same kind of sensors for this purpose is of special interest, reducing the cost by employing a single interrogator, able to measure more than one parameter by simply employing an adequate sensing fiber. To meet this goal, we present here a sensor based on Chirped Pulse Phase sensitive Optical Time Domain Reflectometry, which is able to detect these species while they diffuse into the silica fiber core. Its ability to measure the induced change of its refractive index with a sensitivity around 10 8 has allowed determining hydrogen concentration in the silica core with precision in the order of 10 3 mol/m3 and spatial resolution ~6 m, while also providing an indirect measurement of the solubility of deuterium in a standard telecom-grade optical fiber., European Commission, Ministerio de Economía y Competitividad, Comunidad de Madrid, Agencia Estatal de Investigación, Ministerio de Ciencia e Innovación
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Contribución de congreso (ConferenceOutput)

Photonic Seismology

  • González Herráez, Miguel|||0000-0003-2555-2971
  • Fernández Ruiz, María del Rosario|||0000-0003-3561-2405
  • Teixeira Magalhaes, Regina Manuela
  • Pereira da Costa, Luis Duarte|||0000-0001-5254-0605
  • Fidalgo Martins, Hugo|||0000-0003-3927-8125
  • García Ruiz, Andrés|||0000-0002-6583-5303
  • Martín López, Sonia|||0000-0001-5203-6206
  • Williams, Ethan
  • Zhan, Zhongwen
  • Vantilho, Roel
International Photonics and OptoElectronics Meetings 2019, OFDA, 11/11/2019-14/11/2019, Wuhan, China., One of the greatest outstanding challenges in seismology is the sparsity of instrumentation across the Earth, particularly in the oceans. In this work we show that optical fiberbased distributed acoustic sensors (DAS) can represent a low-cost solution (basically inexistent so far) for monitoring seismicity in remote areas of the ocean. This solution can retrofit existing telecommunication optical fiber cables lying in the ocean and transform them (with no basic change in the cable itself) into powerful seismic sensing arrays. With a single optoelectronic unit in the end of the cable (onshore), a full span of 50-100 km can be monitored, with thousands of measuring points interrogated., European Commission, Ministerio de Economía y Competitividad, Ministerio de Ciencia, Innovación y Universidades, Comunidad de Madrid
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Analysis of disturbance-induced "virtual" perturbations in chirped pulse φ-OTDR

  • Marcon, Leonardo
  • González Herráez, Miguel|||0000-0003-2555-2971
  • Soriano Amat, Miguel|||0000-0002-4819-3898
  • Veronese, Riccardo
  • García Ruiz, Andrés|||0000-0002-6583-5303
  • Calabrese, Marco
  • Pereira da Costa, Luis Duarte|||0000-0001-5254-0605
  • Fernández Ruiz, María del Rosario|||0000-0003-3561-2405
  • Fidalgo Martins, Hugo|||0000-0003-3927-8125
  • Palmieri, Luca
When a disturbance acts on a fiber it induces a change in the local refractive index that influences the fiber backscattering trace. If a chirped pulse φ-OTDR setup is used to interrogate the fiber, this refractive index change appears as a local shift of the received trace, linear to the acting perturbation. However, the refractive index change influences the round trip time of all the backscattering components generated by further fiber sections as well. Due to the high sensitivity of chirped pulse φ-OTDR, the change in the round trip time of the backscattering components, which is usually negligible, may appear as a virtual perturbation in certain conditions. In this letter we derive a mathematical model for the virtual perturbation induced by a disturbance acting on the fiber, when the measurement is performed by a chirped pulse φ-OTDR. We experimentally validate the model by inducing a temperatura change on a known span of fiber while monitoring its effects in a further fiber section kept at rest. The experimental results are then analyzed and compared with the theoretical ones., European Commission, Ministerio de Economía y Competitividad, Agencia Estatal de Investigación, Comunidad de Madrid, Ministerio de Ciencia e Innovación
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico antes de ser publicado, versión del autor (Preprint)

Steady-sensitivity distributed acoustic sensors

  • Fernández Ruiz, María del Rosario|||0000-0003-3561-2405
  • Fidalgo Martins, Hugo|||0000-0003-3927-8125
  • Pereira da Costa, Luis Duarte|||0000-0001-5254-0605
  • Martín López, Sonia|||0000-0001-5203-6206
  • González Herráez, Miguel|||0000-0003-2555-2971
Distributed acoustic sensors (DAS) based on phase-sensitive optical time-domain reflectometry (phiOTDR) have demonstrated interesting performance for many applications ranging from seismology to pipeline protection. However, the sensitivity of traditional DAS relying on coherent detection is strongly dependent on the system noise and trace fading points, offering poor reliability of the results in the spatial dimension. In this manuscript, we evaluate the statistical performance of a recently proposed DAS technique, namely, chirped-pulse phiOTDR, in terms of sensitivity and signal-to-noise ratio (SNR). Our results show behavioral trends that significantly differ from those of traditional DAS. In particular, the acoustic SNR distribution in chirped-pulse DAS is notably narrower than that in the traditional case, allowing to ensure a large system dynamic range across all the points of the optical trace. Hence, chirped-pulse phiOTDR offers localized perturbation detection with very high reliability, almost independent of trace fading points, along the complete reachable range of the sensor., European Commission, Ministerio de Economía y Competitividad, Comunidad de Madrid
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Contribución de congreso (ConferenceOutput)

Aplicación de la técnica φOTDR de pulsos chirpados a la detección distribuida de hidrógeno y deuterio

  • García Ruiz, Andrés|||0000-0002-6583-5303
  • Morana, Adriana
  • Fidalgo Martins, Hugo|||0000-0003-3927-8125
  • Martín López, Sonia|||0000-0001-5203-6206
  • González Herráez, Miguel|||0000-0003-2555-2971
  • Delepine-Lesoille, Sylvie
  • Boukenter, Aziz
  • Ouerdane, Youcef
  • Girard, Sylvain
XI Reunión Española de Optoelectrónica (OPTOEL 2019), 03/07/2019-05/07/2019, Zaragoza, España., La detección y cuantificación de la presencia de ciertas especies químicas tiene una importancia central en lo referente a la vigilancia permanente de grandes estructuras en sectores industriales clave y ciertas infraestructuras civiles como los pozos de extracción de combustibles fósiles o los almacenes de residuos radioactivos, donde se libera H2. En este trabajo se propone y prueba una técnica competitiva capaz de medir la concentración de hidrógeno y deuterio gracias a su difusión en el vidrio de sílice de una fibra óptica convencional, empleadas de hecho para la monitorización distribuida de grandes infraestructuras. La técnica propuesta, basada en CP-φiOTDR, podría representar una novedosa solución para este problema, gracias a su demostrada eficacia para la realización de medidas dinámicas de variaciones de índice de refracción, con gran linealidad y sensibilidades del orden de 10^{-8} unidades de índice de refracción, proporcionando resoluciones espaciales de unos pocos metros y extendiéndose sobre rangos de medida de decenas de kilómetros., European Commission, Ministerio de Economía y Competitividad, Comunidad de Madrid
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Contribución de congreso (ConferenceOutput)

Z-scan characterization of InN layers at telecom wavelengths

  • Monroy Lafuente, Laura|||0000-0002-1764-2267
  • Jiménez Rodríguez, Marco
  • Monroy, Eva
  • González Herráez, Miguel|||0000-0003-2555-2971
  • Naranjo Vega, Fernando Bernabé|||0000-0002-2119-6749
Congreso Nacional de Materiales (CNMAT2018), 04/07/2018, Salamanca, Castilla y León, Spain., This work focuses on the investigation of the nonlinear optical properties of InN thin films. For this purpose, the z-scan method has been applied. This technique allows to measure the nonlinear absorption coefficient of a sample which travels along the optical axis of a focused beam. Thereby, the incident intensity on the sample depends on its position. InN attains a direct band gap energy (0.64-0.90 eV), but also high thermal and chemical stability. Thus, it seems appropriate for applications in the near infrared region., Ministerio de Economía y Competitividad, Comunidad de Madrid