Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 2
Encontrada(s) 1 página(s)

Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Novel K/Ka radiating chain using additive manufacturing for satellite applications

  • Marzo Oyarbide, Andoni
  • Melero Frago, Marta
  • Calero Fernández, Ibai
  • Francés Oiz, Xabier
  • Teberio Berdún, Fernando
  • Teniente Vallinas, Jorge
In this work, a dual circular polarization feed chain using additive manufacturing for satellite application purposes has been developed. The feed chain has been manufactured using Selective Laser Melting (SLM) techniques and the performance has been compared with a traditional Computer Numerical Control (CNC) version. The measured results carried out an excellent agreement with the simulation ones, showing measured return loss above 18 dB and 1 dB of axial ratio over the whole K/Ka satellite band Measurements also show that SLM technology introduces only 0.25-0.3 dB of additional losses within this operating frequency band., This work was supported by the Navarra Government under Project 0011-1408-2021-000004, and in part by the Eurorregi\u00F3n Nouvelle-Aquitaine-Euskadi-Navarra (NAEN)\u2014Validdantenness.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Contribución de congreso (ConferenceOutput)

A novel ku-band circularly-polarized horn antenna based on a ridged wall

  • Marzo Oyarbide, Andoni
  • Teberio Berdún, Fernando
  • Teniente Vallinas, Jorge
In this paper, a novel wideband (31.5 % bandwidth) circularly-polarized antenna based on a ridged wall is presented. A pair of ridges on the inner wall of the horn serves as an inbuilt polarizer, which can generate left-hand or right-hand circular polarization without any additional polarizer. The ridged wall is placed at 45° with respect to the input port linearly polarized wave to generate a 90° phase delay and obtain the desired circular polarization at the aperture. The simulated results show that the antenna works great in the whole Ku satellite band (from 10.7 to 14.7 GHz) with more than 20 dB return loss and below 1 dB axial ratio. The antenna can be fabricated using traditional computer numerical control machining techniques or the new 3D metal additive manufacturing processes., This research was co-funded by the Navarra Government under project 0011-1408-2021-000004 and project 0011-1365-2021-000220.