Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 5
Encontrada(s) 1 página(s)

Repisalud
Publicación Artículo científico (JournalArticle)

Métodos para la suavización de indicadores de mortalidad: aplicación al análisis de desigualdades en mortalidad en ciudades del Estado español (Proyecto MEDEA), Methods to smooth mortality indicators: application to analysis of inequalities in mortality in Spanish cities (the MEDEA Project)

  • Barceló, M Antònia
  • Sáez, Marc
  • Cano-Serral, Gemma
  • Martínez-Beneito, Miguel Angel
  • Martínez, José Miguel
  • Borrell, Carme
  • Ocaña-Riola, Ricardo
  • Montoya, Imanol
  • Calvo, Montse
  • Lopez-Abente, Gonzalo
  • Rodríguez-Sanz, Maica
  • Toro, Silvia
  • Alcalá, José Tomás
  • Saurina, Carme
  • Sánchez-Villegas, Pablo
  • Figueiras, Adolfo
[ES] Aunque la experiencia en el estudio de las desigualdades en la mortalidad en las ciudades españolas es amplia, quedan grandes núcleos urbanos que no han sido investigados utilizando la sección censal como unidad de análisis territorial. En este contexto se sitúa el proyecto coordinado «Desigualdades socioeconómicas y medioambientales en la mortalidad en ciudades de España. Proyecto MEDEA», en el cual participan 10 grupos de investigadores de Andalucía, Aragón, Cataluña, Galicia, Madrid, Comunitat Valenciana y País Vasco. Cabe señalar cuatro particularidades: a) se utiliza como área geográfica básica la sección censal; b) se emplean métodos estadísticos que tienen en cuenta la estructura geográfica de la región de estudio para la estimación de riesgos; c) se aprovechan las oportunidades que ofrecen 3 fuentes de datos complementarias (información sobre contaminación atmosférica, información sobre contaminación industrial y registros de mortalidad), y d) se emprende un análisis coordinado de gran alcance, favorecido por la implantación de la redes temáticas de investigación. El objetivo de este trabajo es explicar los métodos para la suavización de indicadores de mortalidad en el proyecto MEDEA. El artículo se centra en la metodología y los resultados del modelo de mapa de enfermedades de Besag, York y Mollié (BYM). Aunque en el proyecto se han suavizado, mediante el modelo BYM, las rezones de mortalidad estandarizadas (RME) correspondientes a 17 grandes grupos de causas de defunción y 28 causas específicas, aquí se aplica esta metodología a la mortalidad por cáncer de tráquea, de bronquios y de pulmón en ambos sexos en la ciudad de Barcelona durante el período 1996-2003. Como resultado se aprecia un diferente patrón geográfico en las RME suavizadas en ambos sexos. En los hombres se observan unas RME mayores que la unidad en los barrios con mayor privación socioeconómica. En las mujeres este patron se observa en las zonas con un mayor nivel socioeconómico. [EN] Although there is some experience in the study of mortality inequalities in Spanish cities, there are large urban centers that have not yet been investigated using the census tract as the unit of territorial analysis. The coordinated project <Socioeconomic and environmental inequalities in mortality in Spanish cities. The MEDEA project> was designed to fill this gap, with the participation of 10 groups of researchers in Andalusia, Aragon, Catalonia, Galicia, Madrid, Valencia, and the Basque Country. The MEDEA project has four distinguishing features: a) the census tract is used as the basic geographical area; b) statistical methods that include the geographical structure of the region under study are employed for risk estimation; c) data are drawn from three complementary data sources (information on air pollution, information on industrial pollution, and the records of mortality registrars), and d) a coordinated, large-scale analysis, favored by the implantation of coordinated research networks, is carried out. The main objective of the present study was to explain the methods for smoothing mortality indicators in the context of the MEDEA project. This study focusses on the methodology and the results of the Besag, York and Mollié model (BYM) in disease mapping. In the MEDEA project, standardized mortality ratios (SMR), corresponding to 17 large groups of causes of death and 28 specific causes, were smoothed by means of the BYM model; however, in the present study this methodology was applied to mortality due to cancer of the trachea, bronchi and lung in men and women in the city of Barcelona from 1996 to 2003. As a result of smoothing, a different geographical pattern for SMR in both genders was observed. In men, a SMR higher than unity was found in highly deprived areas. In contrast, in women, this pattern was observed in more affluent areas.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

High vertical resolution sampling in density interfaces of estuaries and river plumes

  • Mösso Aranda, César
  • Sierra, J.P.
  • González del Rio Rams, Julio
  • Sanchez-Arcilla Conejo, Agustin
  • Rodilla, M|||0000-0001-6767-5676
  • Romero, Inmaculada|||0000-0001-7876-9328
  • Falco, S.|||0000-0002-8679-9153
[EN] One of the most common procedures for studying the physical and biochemical processes in highly stratified areas, such as estuaries or river plumes (which can be very thin surface layers), is to take water samples and analyze them in a laboratory. To acquire samples in these areas with enough vertical resolution to describe the major changes in the physical and biochemical parameters that can occur near the density interface is often difficult. This paper presents two devices designed to take samples with high vertical resolution in density interfaces. The first device is for sampling in plumes and regions of freshwater influence and is based on the ones presented in Naudin et al. (Journal of Marine Systems 28:203¿227, 2001) and Durand et al. (Continental Shelf Research 22:267¿284, 2002). This device was able to obtain an accurate description of the river plume's vertical structure, although the plume was extremely thin, <1m (Sierra et al., Continental Shelf Research 22:361¿378, 2002). The second device, designed by the authors, is for sampling in estuarine interfaces. Both devices are able to take water samples at selected depths with the desired level of resolution. In this paper, some of the water samples acquired in the Ebro estuary and plume using these sampling devices are presented. To show the potential of these devices, some phosphorous data, acquired using them are compared with data obtained during previous campaigns using sampling methods that did not allow this level of resolution. Phosphorous has been selected to show the comparison as it is the limiting nutrient in most Mediterranean areas. This comparison shows peaks in the estuarine interface (also detected for other chemical and biological properties), which indicate processes (e.g., trapping of settled particulate matter, nutrient mineralization, etc.) in the interface that could not be identified in the previous campaigns and that could be analyzed with accuracy with this sampling technology. Additional and significant advantages of these devices are their low cost, their simplicity of manufacture, and the swiftness of sample acquisition. This illustrates the utility of the devices presented herein., This work has been funded by the project “Preparation and integration of analysis tools towards operational forecast of nutrients in estuaries of European rivers (PIONEER)” from the EU programme MAST-3 (reference no. MAS3-CT98-0170). The authors also wish to acknowledge the support given to this work by the project FANS from the EC MAST-III Research Programme (contract no. MAS3-CT95-0037) and the CYTMAR Programme from the Spanish Comisión Interministerial de Ciencia y Tecnología (project MAR96-1856). Special thanks to Fernando Sánchez from EOSGIS S.L. for his kind collaboration.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Initial performance evaluation of a high resolution Albira small animal positron emission tomography scanner with monolithic crystals and depth-of-interaction encoding from a user&apos, s perspective

  • Balcerzyk, Marcin
  • Kontaxakis, George
  • Delgado, Mercedes
  • Garcia-Garcia, Luis
  • Correcher Salvador, Carlos
  • Gonzalez, Aurora
  • Rubio, Jose L.
  • Pozo, Miguel A.
  • González Martínez, Antonio Javier
  • Benlloch Baviera, Jose María|||0000-0001-6073-1436
The user evaluation of the Albira small animal positron emission tomography scanner is presented. The system has a circle divide 80 mm x 40 mm field of view. In the center of the field of view, it has 2.49% sensitivity, with 33% solid angle coverage, and 0.88% sensitivity for a mouse phantom. The maximum of noise equivalent counts is 14.6 kcps at 6.0 MBq for a mouse phantom. The scanner employs an innovative crystal design of eight 40(50) x 40(50) x 9.8 mm(3) LYSO tapered monolithic crystals forming detector modules read by position-sensitive photomultipliers. This design allows for easy depth-of-interaction readout. The system saturates at 6.7 MBq for the mouse phantom. As an example of the application of the Albira system, some preliminary results from a study of ischemic stroke on animal models with 18-FDG co-registered with MRI images are shown, The study was supported in part by the MULTIMAG (S-BIO-0170-2006) project of Comunidad de Madrid, Spain, and FPA2007-65013-C02-01 project. MB was supported by Marie-Curie fellowship project no MEIF-CT-2006-041482 from European Commission. JLR is grateful for the support by Fellowship FPI (BES-2005-8126), Ministerio de Educacion y Ciencia de Espana.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Spatial distribution of nutrients in the Ebro estuary and plume

  • Sierra, J.P.
  • Sánchez-Arcilla, A.
  • González del Rio Rams, Julio
  • Flos, J.
  • Movellán, E.
  • Mösso, C
  • Martínez, R.
  • Rodilla, M|||0000-0001-6767-5676
  • Falco, S.|||0000-0002-8679-9153
  • Romero, Inmaculada|||0000-0001-7876-9328
[EN] In this paper the results of two field campaigns (Ebro-I and Ebro-II) carried out during the spring and summer of 1997 are used to examine the differences in nutrient behaviour between the estuary and plume of the Ebro River in the Spanish Mediterranean coast. These campaigns are representative of typical conditions existing during a rainy season (spring) and a dry one (summer). In the estuary, the most determinant processes are nutrient transport-strengthened by agricultural irrigation-and phytoplankton death in the surface, followed by its sinking and breakdown below the saline interface. These processes lead to higher levels of ammonium and phosphorus (SRP) below the halocline. In the river plume region the most important process is the phytoplankton uptake which leads to very low levels of SRP in the points of higher salinity. Both ammonium and SRP are always lower below the saline interface than in areas adjacent to the river mouth. (C) 2002 Elsevier Science Ltd. All rights reserved., The authors wish to acknowledge the support given to this work by the projects FANS and PIONEER fromthe EC MAST-III Research Programme (contracts No. MAS3-CT95-0037 and MAS3-CT98-0170, respectively) and the CYTMAR Programme from the Spanish Comision Interministerial de Ciencia y Tecnolog ! !ıa (project MAR96-1856). The collaboration of all the people who endured the fieldwork is also strongly appreciated as well as the affability of the Confederacion Hidrogr ! afica del Ebro supplying ! river discharge data and the Centro de Estudios de Puertos y Costas (CEDEX) lending some of the equipment employed during the field campaigns.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Enhanced Visible Light-Driven Photocatalytic Water-Splitting Reaction of Titanate Nanotubes Sensitised with Ru(II) Bipyridyl Complex

  • Malizia, Mauro
  • Scott, Stuart A.
  • Torrente-Murciano, Laura
  • Boies, Adam M.
  • Aljohani, Talal A.
  • Garcia-Baldovi, Hermenegildo
[EN] The ion exchange of Na+ cations was used to photosensitise titanates nanotubes (Ti-NTs) with tris(2,2'-bipyridine)ruthenium(II) cations (Ru(bpy)(3)(2+)); this yielded a light-sensitised Ti-NTs composite denoted as (Ru(bpy)(3))Ti-NTs, exhibiting the characteristic absorption of Ru(bpy)(3)(2+) in visible light. Incident photon-to-current efficiency (IPCE) measurements and the photocatalytic reduction of methyl viologen reaction confirmed that in the photosensitisation of the (Ru(bpy)(3))Ti-NTs composite, charge transfer and charge separation occur upon excitation by ultraviolet and visible light irradiation. The photocatalytic potential of titanate nanotubes was tested in the water-splitting reaction and the H-2 evolution reaction using a sacrificial agent and showed photocatalytic activity under various light sources, including xenon-mercury lamp, simulated sunlight, and visible light. Notably, in the conditions of the H-2 evolution reaction when (Ru(bpy)(3))Ti-NTs were submitted to simulated sunlight, they exceeded the photocatalytic activity of pristine Ti-NTs and TiO2 by a factor of 3 and 3.5 times, respectively. Also, (Ru(bpy)(3))Ti-NTs achieved the photocatalytic water-splitting reaction under simulated sunlight and visible light, producing, after 4 h, 199 and 282 mu molxH(2x)g(cat)(-1). These results confirm the effective electron transfer of Ru(bpy)(3) to titanate nanotubes. The stability of the photocatalyst was evaluated by a reuse test of four cycles of 24 h reactions without considerable loss of catalytic activity and crystallinity., We gratefully acknowledge King Abdulaziz City for Science and Technology (KACST) for funding (Grant no: 20-0170).