Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 20
Encontrada(s) 1 página(s)

IRTA Pubpro. Open Digital Archive
Publicación Artículo científico (JournalArticle)

Exploring the use of FTIR Amide I band deconvolution to investigate protein secondary structure and texturisation during high moisture extrusion

  • Barnés Calle, Clara
  • Gou, Pere
  • Fulladosa, Elena
  • van den Berg, Frans W.J.
Fourier transform infrared spectroscopy (FTIR) combined with Amide I band deconvolution has been used to investigate protein structural changes occurring during high moisture extrusion processing (HMEP). However, it is a sensitive, user-dependent technique that has sparked debate over its appropriate analytical approach. This paper aims to assess the suitability of FTIR Amide I band deconvolution to investigate protein structural changes in fava bean protein concentrate (FBPC) caused by temperature treatment and/or HMEP at different temperatures (110 ◦C, 135 ◦C and 165 ◦C), and to explore its relationship with the texturisation level of the obtained products. Influence of sample preparation and parameter selection during FTIR deconvolution procedure was also explored. To do so, FBPC was heated in a convection oven or subjected to HMEP at different temperatures (110, 135 or 165 ◦C), and Fourier self-deconvolution (FSD) and second derivative (SD) were explored as bandnarrowing methods to analyse protein conformation from FTIR spectra. FTIR Amide I band deconvolution showed high sensitivity to sample preparation and parameter selection during FSD and SD analytical procedure. Results suggested that HMEP caused the denaturation of β-sheet forms present initially in FBPC, and an increase of other structures including intermolecular β-sheet and/or aggregates—probably due to the formation of new intermolecular bonds. Moreover, although higher temperature during HMEP enhanced fibre-like structure formation, texturisation level could not be directly related to the protein conformation of the final high moisture, This work was supported by the SENSANALOG project funded by MICIU/AEI/10.13039/501100011033 and ERDF/EU [PID2021- 122285OR-I00], and by the CROPDIVA project funded by the European Union's Horizon 2020 research and innovation programme [Grant Agreement 101000847]. C. Barnés-Calle gratefully acknowledges receiving a predoctoral fellowship [FPU20/04009] from the Spanish MCIN/AEI/10.13039/501100011033 and “ESF Investing in your Future”, and a mobility grant from the Institute of Agrifood Research and Technology (IRTA) within the Incentives for Research Program 2023. Acknowledgements are extended to the SensorFINT COST action (CA19145) funded by the European Union for supporting C. Barnés-Calle and E. Fulladosa with mobility grants for Short Term Scientific Missions, to the Consolidated Research Group (TECQUAL 2021 SGR 00461), to the Agència de Gestió d'Ajuts Universitaris i de Recerca (AGAUR), to the CERCA Program of the Generalitat de Catalunya, and to the University of Copenhagen., info:eu-repo/semantics/publishedVersion
IRTA Pubpro. Open Digital Archive
Publicación Artículo científico (JournalArticle)

Innovations in spray drying technology for liquid food processing: Design, mechanisms, and potential for application

  • Dantas, Adriana
  • Piella-Rifà, Marc
  • Pontes Costa, Diogo
  • Felipe, Xavier
  • Gou, Pere
Spray drying is a well-established approach to converting liquid food into powder. This review discusses four types of spray drying techniques currently being used for that purpose, namely: pulse combustion (PC) spray drying, electrostatic spray drying (ESD), nano spray drying (NSD), and extrusion porosification (EP). PC spray drying is still in the development phase in the food sector, having the disadvantage of lacking industrial technology for heat-sensitive foods like milk or whey protein concentrates. On the other hand, it is able to reduce or even eliminate the viscosity limitations of atomizers, in addition to being considered a potential energy-saving option compared to conventional spray drying. ESD and NSD show promise in drying bioactive or heat-sensitive compounds like enzymes, cells, and vitamins. A nano spray dryer contains a spray mesh technology and electrostatic collector, which results in variations in particle size and product yield compared to traditional spray drying. However, the current types of equipment are only available on a laboratory scale. Also, NSD could be unfavorable when considering the low concentrations of feed solutions (0.1–1 % w/v). Finally, EP is claimed to provide better physical powder characteristics and permit the drying of highly concentrated liquids. It is hoped that these additional features and technologies will be further investigated in food systems to enhance process performance and improve powder properties., This work has been funded by the Horizon 2020 UE programme (CROPDIVA -ref. 101000847) and CERCA programme. Adriana Dantas was supported by Juan de la Cierva-formación 2021, reference number 0000-0002-9987-8272. Marc Piella-Rifà is recipient of an IRTA Sponsored Fellowship 2022., info:eu-repo/semantics/publishedVersion
IRTA Pubpro. Open Digital Archive
Publicación Artículo científico (JournalArticle)

Fibre-like structure formation in fava bean protein based extrudates: effects of extrusion inputs and potential of outputs for process control

  • Barnés Calle, Clara
  • Matas, Grau
  • Gou, Pere
  • Fulladosa, Elena
High moisture extrusion processing (HMEP) is a complex process in which product formulation and extrusion conditions play a key role in fibre-like structure formation. The aim of this work was to study the effect of process input parameters (formulation, liquid feed, and extrusion temperature) on the texture development of a high moisture extrudate (HME) based on fava bean protein concentrate (FBPC), combined with a different protein source (pea protein isolate - PPI) or an oil ingredient (extra virgin olive oil (EVOO)). The influence of extrusion outputs (melt temperature, pressure, and torque) on texture parameters and its potential to control the texturisation process was also investigated. Formulation (protein source and added oil) and moisture content had a significant effect on textural characteristics of HME, while a variation of barrel temperature of 10 °C (from 145 to 155 °C) was not sufficient to influence the final product texture. Addition of PPI to FBPC-based HME increased hardness and fibrousness of the product, while oil addition had a lubricating effect which difficulted the formation of fibre-like structures in the direction of the extrusion flow. Out of the studied extrusion outputs, torque was highly correlated with the HME textural characteristics, showing potential for inline control of the HMEP process., This work was financially supported by the Horizon 2020 UE programme through the project “CROPDIVA” [grant number 101000847]; by the Spanish MCIN/AEI/10.13039/501100011033/ FEDER [grant number PID2021–122285OR-I00]. Acknowledgements are extended to the Spanish MCIN/AEI/10.13039/501100011033 and FSE invierte en tu futuro for financing the first author’s doctorate studies [grant number FPU20/04009], to the consolidated Research Group (2021 SGR 00461) and CERCA program from Generalitat de Catalunya. The authors also want to acknowledge Clàudia Sánchez-Martínez for her contribution by performing experimental work., info:eu-repo/semantics/publishedVersion
IRTA Pubpro. Open Digital Archive
Publicación Artículo científico (JournalArticle)

Exploring consumer perceptions of composite plant-based beverages formulated with neglected and underutilized crops

  • Bayudan, Simoun
  • Laureati, Monica
  • Proserpio, Cristina
  • Cattaneo, Camilla
  • Guerrero, Luis
  • Badia Olmos, Celia
  • Claret Coma, Anna
  • Dapčević-Hadnađev, Tamara
  • Pestorić, Mladenka
  • Škrobot, Dubravka
  • Ubiparip, Dragana
  • Pojić, Milica
  • De Steur, Hans
  • Schouteten, Joachim Jietse
The growing interest in plant-based beverages highlights the need for improving the nutritional and sensory qualities of these products in relation to conventional beverages. To enhance their acceptance and appeal, the blending of different ingredients is a promising strategy. However, further exploration is necessary to identify sensory properties that drive consumer acceptance of plant-based beverage blends, especially those made with alternative ingredients. Therefore, the main objective of this study was to examine the sensory properties and elicited emotional responses of plant-based beverage blends made with the case of underutilized crops. Through a multi-country sensory evaluation study (Belgium, Italy, Serbia, Spain; n = 371), four beverage blends based on oat, faba bean, buckwheat, and lupin were tested under blind and informed conditions. The participants' hedonic liking was measured, and perceived beverage properties and their emotional responses were scoped through CATA tasks. Results showed that blends of oat, faba bean and buckwheat were rated similarly or slightly higher than the oat-only beverage. In contrast, the oat and lupin blend received lower ratings, possibly linked to its off-flavours and unusual appearance. Informing consumers about the underutilized crops used generally increased acceptance. In addition, consumers associated positive emotions such as surprise, humour and novelty with the more appreciated beverages. To conclude, these findings highlight the potential of combining underutilized crops in beverage blends as a new alternative in product development, but it is necessary to consider an optimal formulation which can result in fewer undesirable sensory properties while maintaining nutritional advantages., info:eu-repo/semantics/acceptedVersion
IRTA Pubpro. Open Digital Archive
Publicación Artículo científico (JournalArticle)

Impact of rising temperatures on historical wheat yield, phenology, and grain size in Catalonia

  • Gulino, Davide
  • Sayeras, Roser
  • Serra, Joan
  • Betbese, Josep
  • Doltra, Jordi
  • Gracia-Romero, Adrian
  • Lopes, Marta S.
Climate change poses significant challenges to agriculture, impacting crop yields and necessitating adaptive strategies in breeding programs. This study investigates the genetic yield progress of wheat varieties in Catalonia, Spain, from 2007 to 2021, and examines the relationship between genetic yield and climate-related factors, such as temperature. Understanding these dynamics is crucial for ensuring the resilience of wheat crops in the face of changing environmental conditions., This research was funded by the projects TED2021-131606B-C21 of the Spanish Ministry of Economy and Competitiveness and by the CROPDIVA (Climate Resilient Orphan CroPs for increased DIVersity in Agriculture) project through the European Union’s Horizon 2020 research and innovation program under grant agreement No. 101000847. The funders played no role in the study design, data collection and analysis, decision to publish, or manuscript preparation., info:eu-repo/semantics/publishedVersion
IRTA Pubpro. Open Digital Archive
Publicación Artículo científico (JournalArticle)

Innovative plant-based drinks produced by pulse spray drying: An approach on physicochemical properties and microbial assessment

  • Dantas, Adriana
  • Piella-Rifà, Marc
  • Gou, Pere
  • Jofré, Anna
  • Quinteros Gilli, Gisela Julieta
  • Felipe, Francisco Javier
The growing demand for sustainable and nutritious dairy alternatives has driven interest in plant-based beverages, particularly in powdered formats that enhance shelf life and transportability. This study investigated the application of Pulse Spray Drying (PSD), an emerging energy-efficient technology, for producing innovative powdered plant-based drinks. Four formulations were developed using oat flour as the base ingredient, combined with lupin flour, fava bean protein isolate (FPI), and buckwheat flour. Conventional Spray Drying (SD) was used as a benchmark for comparison. The resulting powders were evaluated for their protein content, moisture, water activity, solubility, particle size, density, flow properties, color, hydroxymethylfurfural (HMF) concentration, FTIR spectra, and microbiological quality. PSD-treated samples generally exhibited higher moisture content, larger particle sizes, and better flowability than SD-treated samples. The oat-buckwheat-FPI combination showed significant protein losses under PSD, likely due to aggregation or matrix-specific interactions during drying. In the other formulations, protein retention remained consistent. Solubility and density were formulation-dependent, particularly in samples containing FPI. Color changes were more pronounced in PSD powders, possibly linked to intensified Maillard reactions. HMF levels were low and stood within safety standards. Microbiological analyses confirmed products meet quality standards, though some indicators suggest opportunities for process refinement. FTIR spectroscopy revealed distinct structural differences between raw materials and final powders, reflecting the physicochemical changes induced by processing. The findings confirm that PSD is a promising alternative to traditional drying for producing high-protein, shelf-stable, plant-based powders. The study underscores the importance of aligning formulation design with processing conditions to optimize product quality and functionality., This work has been funded by the Horizon 2020 UE programme (CROPDIVA -ref. 101000847), the consolidated Research Group (2021 SGR 00461), and the CERCA programme. Adriana Dantas was supported by Juan de la Cierva-formación 2021, funded by MCIN/AEI/10.13039/501100011033 and by the European Union NextGenerationEU/PRTR., info:eu-repo/semantics/publishedVersion
IRTA Pubpro. Open Digital Archive
Publicación Artículo científico (JournalArticle)

Heading and maturity date prediction using vegetation indices: A case study using bread wheat, barley and oat crops

  • Gracia-Romero, Adrian
  • Lopes, Marta S.
Contemporary crop research programs involve the evaluation of numerous micro-plots spread across extensive experimental fields. As a result, there is a growing need to depart from labor-intensive manual measurements when assessing phenological data. The growing significance of high throughput phenotyping platforms (HTTP), including unmanned aerial vehicles (UAVs), has rendered these technologies essential in crop research. The overall objective of this study is to explore and validate the use of HTTP methodologies, specifically the potential of vegetation indices (VIs) derived from conventional RGB images, to forecast the date of heading (DH) and maturity (DM) for various cereal crops under different irrigation conditions. To pinpoint DH and DM prediction, a total of nine UAV surveys were conducted throughout the entire crop cycle. Prediction models for DH and DM using VIs were successfully developed for various crop species, explaining 65 % of the variance in bread wheat and 75 % in oats. The highest percentages of variance explained were achieved when models were developed separately for the two irrigation conditions (well-irrigated and rainfed). However, the percentage of variance explained by these models decreased when applied to barley (R²<0.5 for DH). Notably, including final plant height as a predictor increased the percentage of variance explained by the models only for irrigated bread wheat. Furthermore, the utilization of multi-temporal equations, which amalgamated data from diverse UAV surveys, notably enhanced the percentage of variance explained by the model (+160.71 % improvement in DH predictions), particularly those tailored to each specific crop species and irrigation condition. The investigation additionally established a thorough protocol for modeling the phenological aspects of cereal crops utilizing data acquired from UAVs, thereby enhancing the accessibility of this technology for measurements of phenology in large crop research programs., This research was funded by the projects TED2021–131606B-C21 of the Spanish Ministry of Economy and Competitiveness and by the CROPDIVA (Climate Resilient Orphan CroPs for increased DIVersity in Agriculture) project through the European Union’s Horizon 2020 research and innovation program under grant agreement No. 101000847. The funders played no role in the study design, data collection and analysis, decision to publish, or manuscript preparation., info:eu-repo/semantics/publishedVersion
IRTA Pubpro. Open Digital Archive
Publicación Artículo científico (JournalArticle)

Agronomic performance and remote sensing assessment of organic and mineral fertilization in rice fields

  • Martí, Karen
  • Català-Forner, Mar
  • Tomàs, Núria
  • Murillo, Gemma
  • Ortiz, Carlos
  • Sánchez-Torres, María José
  • Vitali, Andrea
  • Lopes, Marta S.
Introduction: Rice heavily relies on nitrogen fertilizers, posing environmental, resource, and geopolitical challenges. This study explores sustainable alternatives like animal manure and remote sensing for resource-efficient rice cultivation. It aims to assess the long-term impact of organic fertilization and remote sensing monitoring on agronomic traits, yield, and nutrition. Methods: A six-year experiment in rice fields evaluated fertilization strategies, including pig slurry (PS) and chicken manure (CM) with mineral fertilizers (MIN), MIN-only, and zero-fertilization. Traits, yield, spectral responses, and nutrient content were measured. Sentinel-2 remote sensing tracked crop development. Results: Cost-effective organic fertilizers (PS and CM) caused a 13% and 15% yield reduction but still doubled zero-fertilization yield. PS reduced nitrogen leaching. Heavy metals in rice grains were present at safe amounts. Organic-fertilized crops showed nitrogen deficiency at the late vegetative stages, affecting yield. Sentinel-2 detected nutrient deficiencies through NDVI. Discussion: Organic fertilizers, especially PS, reduce nitrogen loss, benefiting the environment. However, they come with yield trade-offs and nutrient management challenges that can be managed and balanced with reduced additional mineral applications. Sentinel-2 remote sensing helps manage nutrient deficiencies. In summary, this research favors cost-effective organic fertilizers with improved nutrient management for sustainable rice production., This work was commissioned and funded by the Catalan Ministry of Climate Action, Food and Rural Agenda, by the projects TED2021-131606B-C21 and PLEC2021-007786 of the Spanish Ministry of Economy and Competitiveness and by the CROPDIVA (Climate Resilient Orphan croPs for increased DIVersity in Agriculture) project through the European Union’s Horizon 2020 research and innovation programme under grant agreement No. 101000847. The funders had no role in the study design, data collection and analysis, decision to publish, or manuscript preparation., info:eu-repo/semantics/publishedVersion
IRTA Pubpro. Open Digital Archive
Publicación Artículo científico (JournalArticle)

Powdered oat drink production by pulse spray drying

  • Dantas, Adriana
  • Gou, Pere
  • Piella-Rifà, Marc
  • Felipe, Francisco Javier
Oat is a well-studied food known for its nutritional properties, which provide health benefits under regular consumption. The potential of a new spray drying technology (pulse spray drying, PSD) was explored in drying oat drinks. Additionally, feed solutions were dried by traditional spray drying (SD), and the effect of maltodextrin addition was assessed. Two types of powder samples were collected: the primary powder, from the main chamber; and the overall powder, after mixing both the powder from the main chamber and the powder from the cyclone separator. Some physicochemical properties of the powders and their morphological characteristics were examined. The analyses performed did not indicate significant differences between primary and overall powders. Maltodextrin-added powders from PSD presented higher moisture, water activity (aw), solubility, and particle size; and lower bulk and tapped densities, indicating a higher volume occupied by the particles. Color measurements (luminosity and chroma) differed between the drying treatments: a lighter coloration was observed in the SD group. Finally, images from scanning electron microscopy (SEM) revealed that the lower moisture content in the samples without maltodextrin led to a greater distribution of pores in the surface of particles. In conclusion, the data raised in this study suggest that using the PSD in combination with maltodextrin can be a good approach to dry vegetable drinks. However, other drying parameters need to be tested to improve the powder flow properties (e.g., airflow rate, atomization pressure, relative humidity, feed composition), as they are important characteristics during the processing., This work has been funded by the Horizon 2020 UE programme (CROPDIVA -ref. 101000847) and the CERCA programme. Adriana Dantas was supported by Juan de la Cierva-formación 2021, funded by MCIN/AEI/10.13039/501100011033 and by the European Union NextGenerationEU/PRTR., info:eu-repo/semantics/publishedVersion
IRTA Pubpro. Open Digital Archive
Publicación Artículo científico (JournalArticle)

High moisture extrusion of pea protein isolate to mimic chicken texture: Instrumental and sensory insights

  • Barnés-Calle, Clara
  • Matas, Grau
  • Claret, Anna
  • Guerrero, Lluis
  • Fulladosa, Elena
  • Gou, Pere
High moisture extrusion processing (HMEP) is gaining attention in the plant-based food industry to obtain meat-like textures from different vegetal protein sources. The aim of this study was to evaluate the impact of extrusion process parameters (water feeding rate, barrel temperature and screw speed) on the texture and moisture content of high moisture extrudates (HME) from pea protein isolate using response surface methodology. Sensory textural profile of selected HME was compared with those of cooked chicken breast and a commercial extruded meat analogue sample. Extrusion process parameters had a significant effect on the characteristics of the final product. Barrel temperatures between 145 °C and 165 °C and a water feed rate between 53% and 57% produced HME with an instrumental texture similar to cooked chicken breast, 165 °C and 55% water feed being the conditions that produced the HME with the highest meat-like appearance and sensory fibrousness., This work was financially supported by the Horizon 2020 UE programme through the project “CROPDIVA” [grant number 101000847] and the Spanish Ministry of Science and Innovation through the project “SENSANALOG” [grant number PID2021-122285OR-I00]. Acknowledgements are extended to the Spanish Ministry of Universities for financing the first author's doctorate studies [grant number FPU20-04009], to the consolidated Research Group (2021 SGR 00461) and CERCA program from Generalitat de Catalunya., info:eu-repo/semantics/publishedVersion
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Innovative plant-based drinks produced by pulse spray drying: An approach on physicochemical properties and microbial assessment

  • Dantas, Adriana
  • Piella-Rifà, Marc
  • Gou, Pere
  • Jofré, Anna
  • Quinteros Gilli, Gisela Julieta
  • Felipe, Francisco Javier
The growing demand for sustainable and nutritious dairy alternatives has driven interest in plant-based beverages, particularly in powdered formats that enhance shelf life and transportability. This study investigated the application of Pulse Spray Drying (PSD), an emerging energy-efficient technology, for producing innovative powdered plant-based drinks. Four formulations were developed using oat flour as the base ingredient, combined with lupin flour, fava bean protein isolate (FPI), and buckwheat flour. Conventional Spray Drying (SD) was used as a benchmark for comparison. The resulting powders were evaluated for their protein content, moisture, water activity, solubility, particle size, density, flow properties, color, hydroxymethylfurfural (HMF) concentration, FTIR spectra, and microbiological quality. PSD-treated samples generally exhibited higher moisture content, larger particle sizes, and better flowability than SD-treated samples. The oat-buckwheat-FPI combination showed significant protein losses under PSD, likely due to aggregation or matrix-specific interactions during drying. In the other formulations, protein retention remained consistent. Solubility and density were formulation-dependent, particularly in samples containing FPI. Color changes were more pronounced in PSD powders, possibly linked to intensified Maillard reactions. HMF levels were low and stood within safety standards. Microbiological analyses confirmed products meet quality standards, though some indicators suggest opportunities for process refinement. FTIR spectroscopy revealed distinct structural differences between raw materials and final powders, reflecting the physicochemical changes induced by processing. The findings confirm that PSD is a promising alternative to traditional drying for producing high-protein, shelf-stable, plant-based powders. The study underscores the importance of aligning formulation design with processing conditions to optimize product quality and functionality., This work has been funded by the Horizon 2020 UE programme (CROPDIVA -ref. 101000847), the consolidated Research Group (2021 SGR 00461), and the CERCA programme. Adriana Dantas was supported by Juan de la Cierva-formación 2021, funded by MCIN/AEI/10.13039/501100011033 and by the European Union NextGenerationEU/PRTR., info:eu-repo/semantics/publishedVersion
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Agronomic performance and remote sensing assessment of organic and mineral fertilization in rice fields

  • Martí, Karen
  • Català-Forner, Mar
  • Tomàs, Núria
  • Murillo, Gemma
  • Ortiz, Carlos
  • Sánchez-Torres, María José
  • Vitali, Andrea
  • Lopes, Marta S.
Introduction: Rice heavily relies on nitrogen fertilizers, posing environmental, resource, and geopolitical challenges. This study explores sustainable alternatives like animal manure and remote sensing for resource-efficient rice cultivation. It aims to assess the long-term impact of organic fertilization and remote sensing monitoring on agronomic traits, yield, and nutrition. Methods: A six-year experiment in rice fields evaluated fertilization strategies, including pig slurry (PS) and chicken manure (CM) with mineral fertilizers (MIN), MIN-only, and zero-fertilization. Traits, yield, spectral responses, and nutrient content were measured. Sentinel-2 remote sensing tracked crop development. Results: Cost-effective organic fertilizers (PS and CM) caused a 13% and 15% yield reduction but still doubled zero-fertilization yield. PS reduced nitrogen leaching. Heavy metals in rice grains were present at safe amounts. Organic-fertilized crops showed nitrogen deficiency at the late vegetative stages, affecting yield. Sentinel-2 detected nutrient deficiencies through NDVI. Discussion: Organic fertilizers, especially PS, reduce nitrogen loss, benefiting the environment. However, they come with yield trade-offs and nutrient management challenges that can be managed and balanced with reduced additional mineral applications. Sentinel-2 remote sensing helps manage nutrient deficiencies. In summary, this research favors cost-effective organic fertilizers with improved nutrient management for sustainable rice production., This work was commissioned and funded by the Catalan Ministry of Climate Action, Food and Rural Agenda, by the projects TED2021-131606B-C21 and PLEC2021-007786 of the Spanish Ministry of Economy and Competitiveness and by the CROPDIVA (Climate Resilient Orphan croPs for increased DIVersity in Agriculture) project through the European Union’s Horizon 2020 research and innovation programme under grant agreement No. 101000847. The funders had no role in the study design, data collection and analysis, decision to publish, or manuscript preparation., info:eu-repo/semantics/publishedVersion
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Powdered oat drink production by pulse spray drying

  • Dantas, Adriana
  • Gou, Pere
  • Piella-Rifà, Marc
  • Felipe, Francisco Javier
Oat is a well-studied food known for its nutritional properties, which provide health benefits under regular consumption. The potential of a new spray drying technology (pulse spray drying, PSD) was explored in drying oat drinks. Additionally, feed solutions were dried by traditional spray drying (SD), and the effect of maltodextrin addition was assessed. Two types of powder samples were collected: the primary powder, from the main chamber; and the overall powder, after mixing both the powder from the main chamber and the powder from the cyclone separator. Some physicochemical properties of the powders and their morphological characteristics were examined. The analyses performed did not indicate significant differences between primary and overall powders. Maltodextrin-added powders from PSD presented higher moisture, water activity (aw), solubility, and particle size; and lower bulk and tapped densities, indicating a higher volume occupied by the particles. Color measurements (luminosity and chroma) differed between the drying treatments: a lighter coloration was observed in the SD group. Finally, images from scanning electron microscopy (SEM) revealed that the lower moisture content in the samples without maltodextrin led to a greater distribution of pores in the surface of particles. In conclusion, the data raised in this study suggest that using the PSD in combination with maltodextrin can be a good approach to dry vegetable drinks. However, other drying parameters need to be tested to improve the powder flow properties (e.g., airflow rate, atomization pressure, relative humidity, feed composition), as they are important characteristics during the processing., This work has been funded by the Horizon 2020 UE programme (CROPDIVA -ref. 101000847) and the CERCA programme. Adriana Dantas was supported by Juan de la Cierva-formación 2021, funded by MCIN/AEI/10.13039/501100011033 and by the European Union NextGenerationEU/PRTR., info:eu-repo/semantics/publishedVersion
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Impact of rising temperatures on historical wheat yield, phenology, and grain size in Catalonia

  • Gulino, Davide
  • Sayeras, Roser
  • Serra, Joan
  • Betbese, Josep
  • Doltra, Jordi
  • Gracia-Romero, Adrian
  • Lopes, Marta S.
Climate change poses significant challenges to agriculture, impacting crop yields and necessitating adaptive strategies in breeding programs. This study investigates the genetic yield progress of wheat varieties in Catalonia, Spain, from 2007 to 2021, and examines the relationship between genetic yield and climate-related factors, such as temperature. Understanding these dynamics is crucial for ensuring the resilience of wheat crops in the face of changing environmental conditions., This research was funded by the projects TED2021-131606B-C21 of the Spanish Ministry of Economy and Competitiveness and by the CROPDIVA (Climate Resilient Orphan CroPs for increased DIVersity in Agriculture) project through the European Union’s Horizon 2020 research and innovation program under grant agreement No. 101000847. The funders played no role in the study design, data collection and analysis, decision to publish, or manuscript preparation., info:eu-repo/semantics/publishedVersion
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

High moisture extrusion of pea protein isolate to mimic chicken texture: Instrumental and sensory insights

  • Barnés-Calle, Clara
  • Matas, Grau
  • Claret, Anna
  • Guerrero, Lluis
  • Fulladosa, Elena
  • Gou, Pere
High moisture extrusion processing (HMEP) is gaining attention in the plant-based food industry to obtain meat-like textures from different vegetal protein sources. The aim of this study was to evaluate the impact of extrusion process parameters (water feeding rate, barrel temperature and screw speed) on the texture and moisture content of high moisture extrudates (HME) from pea protein isolate using response surface methodology. Sensory textural profile of selected HME was compared with those of cooked chicken breast and a commercial extruded meat analogue sample. Extrusion process parameters had a significant effect on the characteristics of the final product. Barrel temperatures between 145 °C and 165 °C and a water feed rate between 53% and 57% produced HME with an instrumental texture similar to cooked chicken breast, 165 °C and 55% water feed being the conditions that produced the HME with the highest meat-like appearance and sensory fibrousness., This work was financially supported by the Horizon 2020 UE programme through the project “CROPDIVA” [grant number 101000847] and the Spanish Ministry of Science and Innovation through the project “SENSANALOG” [grant number PID2021-122285OR-I00]. Acknowledgements are extended to the Spanish Ministry of Universities for financing the first author's doctorate studies [grant number FPU20-04009], to the consolidated Research Group (2021 SGR 00461) and CERCA program from Generalitat de Catalunya., info:eu-repo/semantics/publishedVersion
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Fibre-like structure formation in fava bean protein based extrudates: effects of extrusion inputs and potential of outputs for process control

  • Barnés Calle, Clara
  • Matas, Grau
  • Gou, Pere
  • Fulladosa, Elena
High moisture extrusion processing (HMEP) is a complex process in which product formulation and extrusion conditions play a key role in fibre-like structure formation. The aim of this work was to study the effect of process input parameters (formulation, liquid feed, and extrusion temperature) on the texture development of a high moisture extrudate (HME) based on fava bean protein concentrate (FBPC), combined with a different protein source (pea protein isolate - PPI) or an oil ingredient (extra virgin olive oil (EVOO)). The influence of extrusion outputs (melt temperature, pressure, and torque) on texture parameters and its potential to control the texturisation process was also investigated. Formulation (protein source and added oil) and moisture content had a significant effect on textural characteristics of HME, while a variation of barrel temperature of 10 °C (from 145 to 155 °C) was not sufficient to influence the final product texture. Addition of PPI to FBPC-based HME increased hardness and fibrousness of the product, while oil addition had a lubricating effect which difficulted the formation of fibre-like structures in the direction of the extrusion flow. Out of the studied extrusion outputs, torque was highly correlated with the HME textural characteristics, showing potential for inline control of the HMEP process., This work was financially supported by the Horizon 2020 UE programme through the project “CROPDIVA” [grant number 101000847]; by the Spanish MCIN/AEI/10.13039/501100011033/ FEDER [grant number PID2021–122285OR-I00]. Acknowledgements are extended to the Spanish MCIN/AEI/10.13039/501100011033 and FSE invierte en tu futuro for financing the first author’s doctorate studies [grant number FPU20/04009], to the consolidated Research Group (2021 SGR 00461) and CERCA program from Generalitat de Catalunya. The authors also want to acknowledge Clàudia Sánchez-Martínez for her contribution by performing experimental work., info:eu-repo/semantics/publishedVersion
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Innovations in spray drying technology for liquid food processing: Design, mechanisms, and potential for application

  • Dantas, Adriana
  • Piella-Rifà, Marc
  • Pontes Costa, Diogo
  • Felipe, Xavier
  • Gou, Pere
Spray drying is a well-established approach to converting liquid food into powder. This review discusses four types of spray drying techniques currently being used for that purpose, namely: pulse combustion (PC) spray drying, electrostatic spray drying (ESD), nano spray drying (NSD), and extrusion porosification (EP). PC spray drying is still in the development phase in the food sector, having the disadvantage of lacking industrial technology for heat-sensitive foods like milk or whey protein concentrates. On the other hand, it is able to reduce or even eliminate the viscosity limitations of atomizers, in addition to being considered a potential energy-saving option compared to conventional spray drying. ESD and NSD show promise in drying bioactive or heat-sensitive compounds like enzymes, cells, and vitamins. A nano spray dryer contains a spray mesh technology and electrostatic collector, which results in variations in particle size and product yield compared to traditional spray drying. However, the current types of equipment are only available on a laboratory scale. Also, NSD could be unfavorable when considering the low concentrations of feed solutions (0.1–1 % w/v). Finally, EP is claimed to provide better physical powder characteristics and permit the drying of highly concentrated liquids. It is hoped that these additional features and technologies will be further investigated in food systems to enhance process performance and improve powder properties., This work has been funded by the Horizon 2020 UE programme (CROPDIVA -ref. 101000847) and CERCA programme. Adriana Dantas was supported by Juan de la Cierva-formación 2021, reference number 0000-0002-9987-8272. Marc Piella-Rifà is recipient of an IRTA Sponsored Fellowship 2022., info:eu-repo/semantics/publishedVersion
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Heading and maturity date prediction using vegetation indices: A case study using bread wheat, barley and oat crops

  • Gracia-Romero, Adrian
  • Lopes, Marta S.
Contemporary crop research programs involve the evaluation of numerous micro-plots spread across extensive experimental fields. As a result, there is a growing need to depart from labor-intensive manual measurements when assessing phenological data. The growing significance of high throughput phenotyping platforms (HTTP), including unmanned aerial vehicles (UAVs), has rendered these technologies essential in crop research. The overall objective of this study is to explore and validate the use of HTTP methodologies, specifically the potential of vegetation indices (VIs) derived from conventional RGB images, to forecast the date of heading (DH) and maturity (DM) for various cereal crops under different irrigation conditions. To pinpoint DH and DM prediction, a total of nine UAV surveys were conducted throughout the entire crop cycle. Prediction models for DH and DM using VIs were successfully developed for various crop species, explaining 65 % of the variance in bread wheat and 75 % in oats. The highest percentages of variance explained were achieved when models were developed separately for the two irrigation conditions (well-irrigated and rainfed). However, the percentage of variance explained by these models decreased when applied to barley (R²<0.5 for DH). Notably, including final plant height as a predictor increased the percentage of variance explained by the models only for irrigated bread wheat. Furthermore, the utilization of multi-temporal equations, which amalgamated data from diverse UAV surveys, notably enhanced the percentage of variance explained by the model (+160.71 % improvement in DH predictions), particularly those tailored to each specific crop species and irrigation condition. The investigation additionally established a thorough protocol for modeling the phenological aspects of cereal crops utilizing data acquired from UAVs, thereby enhancing the accessibility of this technology for measurements of phenology in large crop research programs., This research was funded by the projects TED2021–131606B-C21 of the Spanish Ministry of Economy and Competitiveness and by the CROPDIVA (Climate Resilient Orphan CroPs for increased DIVersity in Agriculture) project through the European Union’s Horizon 2020 research and innovation program under grant agreement No. 101000847. The funders played no role in the study design, data collection and analysis, decision to publish, or manuscript preparation., info:eu-repo/semantics/publishedVersion
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Exploring the use of FTIR Amide I band deconvolution to investigate protein secondary structure and texturisation during high moisture extrusion

  • Barnés Calle, Clara
  • Gou, Pere
  • Fulladosa, Elena
  • van den Berg, Frans W.J.
Fourier transform infrared spectroscopy (FTIR) combined with Amide I band deconvolution has been used to investigate protein structural changes occurring during high moisture extrusion processing (HMEP). However, it is a sensitive, user-dependent technique that has sparked debate over its appropriate analytical approach. This paper aims to assess the suitability of FTIR Amide I band deconvolution to investigate protein structural changes in fava bean protein concentrate (FBPC) caused by temperature treatment and/or HMEP at different temperatures (110 ◦C, 135 ◦C and 165 ◦C), and to explore its relationship with the texturisation level of the obtained products. Influence of sample preparation and parameter selection during FTIR deconvolution procedure was also explored. To do so, FBPC was heated in a convection oven or subjected to HMEP at different temperatures (110, 135 or 165 ◦C), and Fourier self-deconvolution (FSD) and second derivative (SD) were explored as bandnarrowing methods to analyse protein conformation from FTIR spectra. FTIR Amide I band deconvolution showed high sensitivity to sample preparation and parameter selection during FSD and SD analytical procedure. Results suggested that HMEP caused the denaturation of β-sheet forms present initially in FBPC, and an increase of other structures including intermolecular β-sheet and/or aggregates—probably due to the formation of new intermolecular bonds. Moreover, although higher temperature during HMEP enhanced fibre-like structure formation, texturisation level could not be directly related to the protein conformation of the final high moisture, This work was supported by the SENSANALOG project funded by MICIU/AEI/10.13039/501100011033 and ERDF/EU [PID2021- 122285OR-I00], and by the CROPDIVA project funded by the European Union's Horizon 2020 research and innovation programme [Grant Agreement 101000847]. C. Barnés-Calle gratefully acknowledges receiving a predoctoral fellowship [FPU20/04009] from the Spanish MCIN/AEI/10.13039/501100011033 and “ESF Investing in your Future”, and a mobility grant from the Institute of Agrifood Research and Technology (IRTA) within the Incentives for Research Program 2023. Acknowledgements are extended to the SensorFINT COST action (CA19145) funded by the European Union for supporting C. Barnés-Calle and E. Fulladosa with mobility grants for Short Term Scientific Missions, to the Consolidated Research Group (TECQUAL 2021 SGR 00461), to the Agència de Gestió d'Ajuts Universitaris i de Recerca (AGAUR), to the CERCA Program of the Generalitat de Catalunya, and to the University of Copenhagen., info:eu-repo/semantics/publishedVersion
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Exploring consumer perceptions of composite plant-based beverages formulated with neglected and underutilized crops

  • Bayudan, Simoun
  • Laureati, Monica
  • Proserpio, Cristina
  • Cattaneo, Camilla
  • Guerrero, Luis
  • Badia Olmos, Celia
  • Claret Coma, Anna
  • Dapčević-Hadnađev, Tamara
  • Pestorić, Mladenka
  • Škrobot, Dubravka
  • Ubiparip, Dragana
  • Pojić, Milica
  • De Steur, Hans
  • Schouteten, Joachim Jietse
The growing interest in plant-based beverages highlights the need for improving the nutritional and sensory qualities of these products in relation to conventional beverages. To enhance their acceptance and appeal, the blending of different ingredients is a promising strategy. However, further exploration is necessary to identify sensory properties that drive consumer acceptance of plant-based beverage blends, especially those made with alternative ingredients. Therefore, the main objective of this study was to examine the sensory properties and elicited emotional responses of plant-based beverage blends made with the case of underutilized crops. Through a multi-country sensory evaluation study (Belgium, Italy, Serbia, Spain; n = 371), four beverage blends based on oat, faba bean, buckwheat, and lupin were tested under blind and informed conditions. The participants' hedonic liking was measured, and perceived beverage properties and their emotional responses were scoped through CATA tasks. Results showed that blends of oat, faba bean and buckwheat were rated similarly or slightly higher than the oat-only beverage. In contrast, the oat and lupin blend received lower ratings, possibly linked to its off-flavours and unusual appearance. Informing consumers about the underutilized crops used generally increased acceptance. In addition, consumers associated positive emotions such as surprise, humour and novelty with the more appreciated beverages. To conclude, these findings highlight the potential of combining underutilized crops in beverage blends as a new alternative in product development, but it is necessary to consider an optimal formulation which can result in fewer undesirable sensory properties while maintaining nutritional advantages., info:eu-repo/semantics/acceptedVersion