Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 7
Encontrada(s) 1 página(s)

UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Suppressing colloidal quantum dot multimer fusion leads to high-performance InSb infrared photodetectors

  • Peng, Lucheng
  • Wang, Yongjie
  • Roda, Carmelita
  • Malla, Aditya Jagadeesh
  • Dosil García, Miguel
  • Mandal, Debranjan
  • Konstantatos, Gerasimos
Environmentally friendly InSb colloidal quantum dots (CQDs) short-wave infrared (SWIR) photodetectors feature characteristics of low-cost, high-volume scalability, CMOS integrability, and compliance with RoHS regulations, and hold great commercial potential. Yet, their performance falls short of commercially relevant specifications. In this work, it is posited that CQD fusion observed in these dots leads to the formation of band-tail trap states and it is further demonstrated that avoidance of such band-tail trap states is crucial for device performance. By doing so, InSb CQDs SWIR photodetectors are reported with compelling performance metrics, including a dark current of 4 µA cm-2, EQE of ˜20% (at -1 V), a linear dynamic range over 140 dB and a response time of 90 ns. This represents a more than ten-fold reduction in dark current compared to previously report InSb CQD photodetectors in the SWIR range. The record high PLQY of 10% for InSb/InP CQDs taken together with the high EQE of the device at zero bias confirm the achievement of high-quality InSb CQDs through the suppression of band-tail trap states and passivation of surface defects., G.K. acknowledges financial support from the European Research Coun- cil (ERC) under the European Union’s Horizon 2020 research and inno- vation programme (grant agreement no. 101002306), the Fundació Pri- vada Cellex, the program CERCA and ‘Severo Ochoa’ Centre of Excel- lence CEX2019-000910-S funded by the Spanish State Research Agency. This project has also received funding from the European Union un- der grant agreement No 101119489 (2DNeuralvision). Views and opin- ions expressed are however those of the author(s) only and do not necessarily reflect those of the European Union. Neither the European Union nor the granting authority can be held responsible for them. C.R. acknowledges MCIU (Ministerio de Ciencia Innovacion y Universi- dades)/AEI(Agencia Estatal de Investigacion)/10.13039/ 501100011033 and European Union “NextGenerationEU”/PRTR under the Juan de La Cierva fellowship JDC2022-049722-I., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

InSb/InP core-shell colloidal quantum dots for sensitive and fast short-wave infrared photodetectors

  • Peng, Lucheng
  • Wang, Yongjie
  • Ren, Yurong
  • Wang, Zhuoran
  • Cao, Pengfei
  • Konstantatos, Gerasimos
Colloidal quantum dot (CQD) technology is considered the main contender toward a low-cost high-performance optoelectronic technology platform for applications in the short-wave infrared (SWIR) to enable 3D imaging, LIDAR night vision, etc. in the consumer electronics and automotive markets. In order to unleash the full potential of this technology, there is a need for a material that is environmentally friendly, thus RoHS compliant, and possesses adequate optoelectronic properties to deliver high-performance devices. InSb CQDs hold great potential in view of their RoHS-compliant nature and-in principle-facile access to the SWIR. However, to date progress in realizing high-performance optoelectronic devices, including photodetectors (PDs), has been limited. Here, we have developed a synthesis method for producing size-tunable InSb CQDs with distinct excitonic peaks spanning a wide range from 900 to 1750 nm. To passivate the surface defects and enhance the photoluminescence (PL) efficiency of InSb CQDs, we further designed an InSb/InP core–shell structure. By employing the InSb/InP core–shell CQDs in a photodiode device stack, we report on robust InSb CQD SWIR photodetectors that exhibit an external quantum efficiency (EQE) of 25% at 1240 nm, a wide linear dynamic range exceeding 128 dB, a photoresponse time of 70 ns, and a specific detectivity of 4.4 × 1011 jones., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Infrared Colloidal Quantum Dot Lasers

  • Taghipour, Nima
  • Konstantatos, Gerasimos
Infrared (IR) lasers are crucial for diverse applications including optical communications, environmental sensing, biomedical imaging, ranging, and process quality control. Conventional IR lasers, based on III-V semiconductor materials or optical fiber systems, face significant challenges such as high fabrication costs, limited wavelength tunability, and incompatibility with silicon photonics. Colloidal quantum dot (CQD) IR lasers have emerged as a promising alternative, offering solution-processibility, size-tunable emission wavelength, and low-cost fabrication. Recent efforts have enabled the realization of room-temperature IR lasers operating in the telecommunication band and even expanding their emission into the extended short-wave infrared (e-SWIR) range. While advancements in CQD synthesis, surface passivation, and wavefunction engineering have improved lasing performance by suppressing Auger recombination, leveraging advanced mechanisms such as doping strategies and cascade charge transfer, and increasing the absorption crosssection. Most demonstrations still rely on intense pulsed excitation to achieve stimulated emission within a short optical gain lifetime. Moreover, substantial challenges remain in realizing continuous-wave operation, and electrically-driven lasers. This minireview highlights recent breakthroughs in CQD IR lasers, compares them with their visible counterparts, and explores future directions to address existing challenges, paving the way for next-generation silicon photonic integration., Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publicación

A Colloidal Quantum Dot Thermistor and Bolometer

  • Kumar, Gaurav
  • Dalmases Solé, Mariona
  • Taghipour, Nima
  • Bera, Rajesh
  • Whitworth, Guy
  • Torres Perez, Goretti
  • Dosil, Miguel
  • Konstantatos, Gerasimos
Bolometric detection offers a compelling route to room-temperature mid- and long-wave infrared (MWIR/LWIR) photodetection by measuring temperature-induced conductivity changes in a thermistor element thermally coupled to an absorber. However, conventional thermistor materials such as vanadium oxide (VOx) and amorphous silicon (a-Si) exhibit moderate temperature coefficient of resistance (TCR) values (−2 to −3%/K). Higher TCRs have been achieved using SiGe/Si quantum wells (∼−5%/K), yet these require costly epitaxial growth and further improvements are hindered by lattice mismatch-induced defects. Here, we report a novel thermistor platform based on colloidal quantum dots (CQDs) that circumvents these limitations by exploiting their lattice-mismatch-free nature. By tuning the size and surface chemistry of lead chalcogenide CQDs, we engineer the energetic potential landscape to modulate thermal activation energy, achieving TCR values of up to −9%/K. We further integrate this CQD thermistor with a plasmonic metamaterial absorber (PMA), enabling room-temperature wavelength-selective photodetection across the mid-to-long-wave infrared (MWIR/LWIR) spectrum. The bolometer detectors exhibited LWIR response with a time constant of ∼8 ms and room-temperature detectivity approaching 10⁶ Jones at 9 µm, without using microelectromechanical systems (MEMS) technology., Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Infrared Colloidal Quantum Dot Lasers

  • Taghipour, Nima
  • Konstantatos, Gerasimos
Infrared (IR) lasers are crucial for diverse applications including optical communications, environmental sensing, biomedical imaging, ranging, and process quality control. Conventional IR lasers, based on III-V semiconductor materials or optical fiber systems, face significant challenges such as high fabrication costs, limited wavelength tunability, and incompatibility with silicon photonics. Colloidal quantum dot (CQD) IR lasers have emerged as a promising alternative, offering solution-processibility, size-tunable emission wavelength, and low-cost fabrication. Recent efforts have enabled the realization of room-temperature IR lasers operating in the telecommunication band and even expanding their emission into the extended short-wave infrared (e-SWIR) range. While advancements in CQD synthesis, surface passivation, and wavefunction engineering have improved lasing performance by suppressing Auger recombination, leveraging advanced mechanisms such as doping strategies and cascade charge transfer, and increasing the absorption crosssection. Most demonstrations still rely on intense pulsed excitation to achieve stimulated emission within a short optical gain lifetime. Moreover, substantial challenges remain in realizing continuous-wave operation, and electrically-driven lasers. This minireview highlights recent breakthroughs in CQD IR lasers, compares them with their visible counterparts, and explores future directions to address existing challenges, paving the way for next-generation silicon photonic integration., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

InSb/InP core-shell colloidal quantum dots for sensitive and fast short-wave infrared photodetectors

  • Peng, Lucheng
  • Wang, Yongjie
  • Ren, Yurong
  • Wang, Zhuoran
  • Cao, Pengfei
  • Konstantatos, Gerasimos
Colloidal quantum dot (CQD) technology is considered the main contender toward a low-cost high-performance optoelectronic technology platform for applications in the short-wave infrared (SWIR) to enable 3D imaging, LIDAR night vision, etc. in the consumer electronics and automotive markets. In order to unleash the full potential of this technology, there is a need for a material that is environmentally friendly, thus RoHS compliant, and possesses adequate optoelectronic properties to deliver high-performance devices. InSb CQDs hold great potential in view of their RoHS-compliant nature and-in principle-facile access to the SWIR. However, to date progress in realizing high-performance optoelectronic devices, including photodetectors (PDs), has been limited. Here, we have developed a synthesis method for producing size-tunable InSb CQDs with distinct excitonic peaks spanning a wide range from 900 to 1750 nm. To passivate the surface defects and enhance the photoluminescence (PL) efficiency of InSb CQDs, we further designed an InSb/InP core–shell structure. By employing the InSb/InP core–shell CQDs in a photodiode device stack, we report on robust InSb CQD SWIR photodetectors that exhibit an external quantum efficiency (EQE) of 25% at 1240 nm, a wide linear dynamic range exceeding 128 dB, a photoresponse time of 70 ns, and a specific detectivity of 4.4 × 1011 jones., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Suppressing colloidal quantum dot multimer fusion leads to high-performance InSb infrared photodetectors

  • Peng, Lucheng
  • Wang, Yongjie
  • Roda, Carmelita
  • Malla, Aditya Jagadeesh
  • Dosil García, Miguel
  • Mandal, Debranjan
  • Konstantatos, Gerasimos
Environmentally friendly InSb colloidal quantum dots (CQDs) short-wave infrared (SWIR) photodetectors feature characteristics of low-cost, high-volume scalability, CMOS integrability, and compliance with RoHS regulations, and hold great commercial potential. Yet, their performance falls short of commercially relevant specifications. In this work, it is posited that CQD fusion observed in these dots leads to the formation of band-tail trap states and it is further demonstrated that avoidance of such band-tail trap states is crucial for device performance. By doing so, InSb CQDs SWIR photodetectors are reported with compelling performance metrics, including a dark current of 4 µA cm-2, EQE of ˜20% (at -1 V), a linear dynamic range over 140 dB and a response time of 90 ns. This represents a more than ten-fold reduction in dark current compared to previously report InSb CQD photodetectors in the SWIR range. The record high PLQY of 10% for InSb/InP CQDs taken together with the high EQE of the device at zero bias confirm the achievement of high-quality InSb CQDs through the suppression of band-tail trap states and passivation of surface defects., G.K. acknowledges financial support from the European Research Coun- cil (ERC) under the European Union’s Horizon 2020 research and inno- vation programme (grant agreement no. 101002306), the Fundació Pri- vada Cellex, the program CERCA and ‘Severo Ochoa’ Centre of Excel- lence CEX2019-000910-S funded by the Spanish State Research Agency. This project has also received funding from the European Union un- der grant agreement No 101119489 (2DNeuralvision). Views and opin- ions expressed are however those of the author(s) only and do not necessarily reflect those of the European Union. Neither the European Union nor the granting authority can be held responsible for them. C.R. acknowledges MCIU (Ministerio de Ciencia Innovacion y Universi- dades)/AEI(Agencia Estatal de Investigacion)/10.13039/ 501100011033 and European Union “NextGenerationEU”/PRTR under the Juan de La Cierva fellowship JDC2022-049722-I., Peer Reviewed, Postprint (published version)