Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 9
Encontrada(s) 1 página(s)

Addi. Archivo Digital para la Docencia y la Investigación
Publicación Artículo científico (JournalArticle)

Harmonising the land-use flux estimates of global models and national inventories for 2000-2020

  • Grassi, G.
  • Schwingshackl, C.
  • Gasser, T.
  • Houghton, R.A.
  • Sitch, S.
  • Canadell, J.G.
  • Cescatti, A.
  • Ciais, P.
  • Federici, S.
  • Friedlingstein, P.
  • Kurz, W.A.
  • Sanz Sánchez, María José
  • Abad Viñas, R.
  • Bultan, S.
  • Ceccherini, G.
  • Falk, S.
  • Kato, E.
  • Kennedy, D.
  • Knauer, J.
  • Korosuo, A.
  • Melo, J.
  • McGrath, M.J.
  • Nabel, J.E.M.
  • Poulter, B.
  • Romanovskaya, A.A.
  • Rossi, S.
  • Tian, H.
  • Walker, A.P.
  • Yuan, W.
  • Yue, X
  • Pongratz, J.
As the focus of climate policy shifts from pledges to implementation, there is a growing need to track progress on climate change mitigation at the country level, particularly for the land-use sector. Despite new tools and models providing unprecedented monitoring opportunities, striking differences remain in estimations of anthropogenic land-use CO2 fluxes between, on the one hand, the national greenhouse gas inventories (NGHGIs) used to assess compliance with national climate targets under the Paris Agreement and, on the other hand, the Global Carbon Budget and Intergovernmental Panel on Climate Change (IPCC) assessment reports, both based on global bookkeeping models (BMs). Recent studies have shown that these differences are mainly due to inconsistent definitions of anthropogenic CO2 fluxes in managed forests. Countries assume larger areas of forest to be managed than BMs do, due to a broader definition of managed land in NGHGIs. Additionally, the fraction of the land sink caused by indirect effects of human-induced environmental change (e.g. fertilisation effect on vegetation growth due to increased atmospheric CO2 concentration) on managed lands is treated as non-anthropogenic by BMs but as anthropogenic in most NGHGIs. We implement an approach that adds the CO2 sink caused by environmental change in countries' managed forests (estimated by 16 dynamic global vegetation models, DGVMs) to the land-use fluxes from three BMs. This sum is conceptually more comparable to NGHGIs and is thus expected to be quantitatively more similar. Our analysis uses updated and more comprehensive data from NGHGIs than previous studies and provides model results at a greater level of disaggregation in terms of regions, countries and land categories (i.e. forest land, deforestation, organic soils, other land uses). Our results confirm a large difference (6.7 GtCO2 yr−1) in global land-use CO2 fluxes between the ensemble mean of the BMs, which estimate a source of 4.8 GtCO2 yr−1 for the period 2000–2020, and NGHGIs, which estimate a sink of −1.9 GtCO2 yr−1 in the same period. Most of the gap is found on forest land (3.5 GtCO2 yr−1), with differences also for deforestation (2.4 GtCO2 yr−1), for fluxes from other land uses (1.0 GtCO2 yr−1) and to a lesser extent for fluxes from organic soils (0.2 GtCO2 yr−1). By adding the DGVM ensemble mean sink arising from environmental change in managed forests (−6.4 GtCO2 yr−1) to BM estimates, the gap between BMs and NGHGIs becomes substantially smaller both globally (residual gap: 0.3 GtCO2 yr−1) and in most regions and countries. However, some discrepancies remain and deserve further investigation. For example, the BMs generally provide higher emissions from deforestation than NGHGIs and, when adjusted with the sink in managed forests estimated by DGVMs, yield a sink that is often greater than NGHGIs. In summary, this study provides a blueprint for harmonising the estimations of anthropogenic land-use fluxes, allowing for detailed comparisons between global models and national inventories at global, regional and country levels. This is crucial to increase confidence in land-use emissions estimates, support investments in land-based mitigation strategies and assess the countries' collective progress under the Global Stocktake of the Paris Agreement., Giacomo Grassi acknowledges funding by the EU's Horizon 2020 VERIFY project (no. 776810). Josep G. Canadell acknowledges funding support of the Australian National Environmental Science Program – Climate Systems Hub. Thomas Gasser acknowledges funding support from the European Union's Horizon 2020 research and innovation programme under grant agreements nos. 773421 (Nunataryuk project) and 101003536 (ESM2025 project). ORNL is managed by UT-Battelle, LLC, for the DOE under contract DE-AC05-1008 00OR22725. Selma Bultan acknowledges funding support from the German Stifterverband für die Deutsche Wissenschaft e.V. in collaboration with Volkswagen AG (Addressing the new role of terrestrial CO2 fluxes for climate mitigation).
Addi. Archivo Digital para la Docencia y la Investigación
Publicación Artículo científico (JournalArticle)

Mapping land-use fluxes for 2001–2020 from global models to national inventories

  • Giacomo, G.
  • Schwingshackl, C.
  • Gasser, T.
  • Houghton, R.A.
  • Sitch, S.
  • Canadell, J.G.
  • Cescatti, A.
  • Ciais, P.
  • Federici, S.
  • Friedlingstein, P.
  • Sanz Sánchez, María José
  • Kurz, W.A.
  • Abad Viñas, R.
  • Alkama, R.
  • Ceccherini, G.
  • Kato, E.
  • Kennedy, D.
  • Knauer, J.
  • Korosuo, A.
  • McGrath, M.J.
  • Nabel, J.
  • Poulter, B.
  • Rossi, S.
  • Walker, A.P.
  • Yuan, W.
  • Yue, X.
  • Pongratz, J.
With the focus of climate policy shifting from pledges to implementation, there is an increasing need to track progress on climate change mitigation at country level, especially for the land-use sector. Despite new tools and models offering unprecedented monitoring opportunities, striking differences remain in estimations of anthropogenic land-use CO2 fluxes between the national greenhouse gas inventories (NGHGIs) used to assess compliance with the Paris Agreement, and the Global Carbon Budget and IPCC assessment reports, both based on global bookkeeping models (BMs)., G.G. acknowledges funding from the EU’s Horizon 2020 VERIFY project (no. 776810). J.G.C. acknowledges the support of the Australian National Environmental Science Program - Climate Systems Hub. T.G. acknowledges support from the European Union’s Horizon 2020 research and innovation programme under grant agreement #101003536 (ESM2025 project), and by the Austrian Science Fund (FWF) under grant agreement P31796-N29 (ERM project). The authors thank Peter Anthoni and Almut Arneth (LPJ-GUESS model) and Sebastian Lienert (LPX model)
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Global analysis of the controls on seawater dimethylsulfide spatial variability

  • Manville, George
  • Bell, Thomas G.
  • Mulcahy, Jane P.
  • Simó, Rafel
  • Galí, Martí
  • Mahajan, Anoop S.
  • Hulswar, Shrivardhan
  • Halloran, Paul R.
16 pages, 5 figures, 1 table, supplement https://doi.org/10.5194/bg-20-1813-2023-supplement.-- Data availability: DMS and ancillary in situ data (SST and salinity) are sourced from the global surface seawater DMS database (GSSDD; https://saga.pmel.noaa.gov/dms/) and supplied by authors Rafel Simó, Martí Galí, Anoop S. Mahajan (Malaspina Expedition in 2010–2011, M10), Thomas G. Bell (North Atlantic Aerosol and Marine Ecosystem Study in 2015–2018, NAAMES; https://doi.org/10.5067/SeaBASS/NAAMES/DATA001, Behrenfeld et al., 2018), and George Manville (Southern oCean SeAsonaL Experiment in 2019, SCALE). Requests for access to M10 and SCALE DMS data can be sent to the corresponding authors (George Manville and Thomas G. Bell). Satellite data are available in online NASA repositories for chlorophyll a (https://doi.org/10.5067/AQUA/MODIS/L3M/CHL/2018, NASA Goddard Space Flight Center, 2018) and sea surface height anomalies (https://doi.org/10.5067/SLREF-CDRV2, Zlotnicki et al., 2019), Dimethylsulfide (DMS) emitted from the ocean makes a significant global contribution to natural marine aerosol and cloud condensation nuclei and, therefore, our planet's climate. Oceanic DMS concentrations show large spatiotemporal variability, but observations are sparse, so products describing global DMS distribution rely on interpolation or modelling. Understanding the mechanisms driving DMS variability, especially at local scales, is required to reduce uncertainty in large-scale DMS estimates. We present a study of mesoscale and submesoscale (< 100 km) seawater DMS variability that takes advantage of the recent expansion in high-frequency seawater DMS observations and uses all available data to investigate the typical distances over which DMS varies in all major ocean basins. These DMS spatial variability length scales (VLSs) are uncorrelated with DMS concentrations. The DMS concentrations and VLSs can therefore be used separately to help identify mechanisms underpinning DMS variability. When data are grouped by sampling campaigns, almost 80 % of the DMS VLS can be explained using the VLSs of sea surface height anomalies, density, and chlorophyll a. Our global analysis suggests that both physical and biogeochemical processes play an equally important role in controlling DMS variability, which is in contrast with previous results based on data from the low to mid-latitudes. The explanatory power of sea surface height anomalies indicates the importance of mesoscale eddies in driving DMS variability, previously unrecognised at a global scale and in agreement with recent regional studies. DMS VLS differs regionally, including surprisingly high-frequency variability in low-latitude waters. Our results independently confirm that relationships used in the literature to parameterise DMS at large scales appear to be considering the right variables. However, regional DMS VLS contrasts highlight that important driving mechanisms remain elusive. The role of submesoscale features should be resolved or accounted for in DMS process models and parameterisations. Future attempts to map DMS distributions should consider the length scale of variability, This research has been supported by the Natural Environment Research Council (grant nos. NE/R007586/1 and NE/W009277/1), Met Office Hadley Centre Climate Programme funded by BEIS, the Horizon 2020 (grant nos. 101003536 and ERC-2018-ADG-834162), the Spanish National Plan for Scientific and Technical Research and Innovation (grant nos. CTM2016-81008-R, 202230I123, and CEX2019-000928-S), and the Indian Institute of Tropical Meteorology (IITM), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

CMIP7 data request: Impacts and adaptation priorities and opportunities

  • Ruane, Alex C.
  • Fernández, Jesús
A. C. Ruane et al., The Coupled Model Intercomparison Project Phase 7 (CMIP7) undertook an extensive process to gather community input and refine data requests related to impacts and adaptation applications of Earth System Model (ESM) outputs. The Impacts and Adaptation (I&A) Data Request Team worked with CMIP7 leadership to distribute an open solicitation across many communities that use climate model outputs requesting inputs for new and existing variables, the most applicable temporal characteristics, and groupings of variables that together allow for specific application opportunities. This input was then collated and translated into CMIP7 standard templates for inclusion in the broader data request, leading to 13 I&A data request opportunities, 60 variable groups and 539 unique variables sought by vulnerability, impacts, adaptation, and climate services user communities. Here, we describe these opportunities and variable groups, as well as new insights into how ESM groups can prioritize outputs that set off a chain of further analyses, ultimately informing decisions impacting society and natural systems. These include an emphasis on high-resolution outputs to allow further modeling of climate impacts at regional and local scales, improved representation of extreme weather events, enhanced accuracy of downscaling and bias-adjustment techniques, and support for more detailed assessments for decision-making in adaptation and mitigation strategies. There is also broad interest in more extensive provisioning of two-dimensional variables at the Earth's surface, prioritizing experiments that enhance our understanding of both the recent past and future scenarios, and providing outputs that allow further downscaling and bias adjustment. We emphasize that variable groups are the fundamental level at which to engage with the I&A data request, matching the scale of input and the way output provision enables specific I&A applications. Given resource constraints, we applaud CMIP7 efforts to foster strong engagement and communication between ESM groups and the I&A team to build consensus around prudent compromises in priority variables, temporal resolutions, simulation experiments, time subsets, and ensemble members., ACR contributions were supported by a NASA Community Service Grant and Earth Science Division support of the NASA GISS Climate Impacts Group. The work of CLP was supported by the National Centre for Atmospheric Science (NCAS, UK). UI acknowledges European Union’s Horizon Europe Programme under CleanCloud (No. 101137639). JM was supported by the Reducing Uncertainties in Biogeochemical Interactions through Synthesis and Computing Scientific Focus Area (RUBISCO SFA) project funded through the Earth and Environmental Systems Sciences Division of the Biological and Environmental Research Off ice in the US Department of Energy (DOE) Office of Science. Oak Ridge National Laboratory (ORNL) is supported by the Office of Science of the DOEunderContract No. DE-AC05-00OR22725.DZ contributions were supported by the German Science Foundation DFG (Grant no. ZU 361/6-1). The work of DI was supported by the Foundation Euro-Mediterranean Center on Climate Change (CMCC, Italy). BH received funding from the European Union’s Horizon 2020 Research and Innovation program under grant agreement no. 101003536 (ESM2025– Earth System Models for the Future). The work of CB was supported by the Copernicus Climate Change Service, a programme of the European Commission implemented by ECMWF. The work of MJ was supported by UK Research and Innovation (grant no. NE/Y001729/1). The work of XL was supported by U.S. NSF #2420405. The work of LZ was supported by US NSF CAREER Award no. 2145362; US NASA no. 80NSSC25K7322., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Exploring ozone-climate interactions in idealized CMIP6 DECK experiments

  • Wang, Jingyu
  • Chiodo, Gabriel
  • Ayarzagüena, Blanca
  • Ball, William T.
  • Diallo, Mohamadou
  • Hassler, Birgit
  • Keeble, James
  • Nowack, Peer
  • Orbe, Clara
  • Vattioni, Sandro
  • Sukhodolov, Timofei
Under climate change driven by increased carbon dioxide (CO2) concentrations, stratospheric ozone will respond to temperature and circulation changes, leading to chemistry-climate feedback by modulating large-scale atmospheric circulation and Earth's energy budget. However, there is significant model uncertainty since many processes are involved and few models have a detailed chemistry scheme. This work employs the latest data from Coupled Model Intercomparison Project Phase 6 (CMIP6) to investigate the ozone response to increased CO2. We find that in most models, ozone increases in the upper stratosphere (US) and extratropical lower stratosphere (LS) and decreases in the tropical LS; thus, the total column ozone (TCO) response is small in the tropics. The ozone response is mainly driven by slower chemical destruction cycles in the US and enhanced upwelling in the LS, with a highly model-dependent Arctic ozone response to polar vortex strength changes. We then explore the ozone-climate feedback by combining offline calculations and comparisons between models with ("chem") and without ("no-chem") interactive chemistry. We find that the stratospheric temperature response is substantial, with a global negative radiative forcing ranging from -0.03 to -0.19 Wm-2. We find that chem models consistently simulate less tropospheric warming and a stronger weakening of the polar stratospheric vortex, which result in a larger increase in sudden stratospheric warming (SSW) frequency than in most no-chem models. Our findings show that ozone-climate feedback is essential for the climate system and should be considered in the development of Earth system models., We acknowledge the World Climate Research Programme (WCRP) for coordinating and promoting CMIP6 through its Working Group on Coupled Modeling. We thank the climate modeling groups that produced and made available their model output, the Earth System Grid Federation (ESGF) for archiving the data and providing access, and the multiple funding agencies that support CMIP6 and ESGF. We thank DynVarMIP for providing the TEM analysis metrics. We also thank the GFDL model development team, who led the development of GFDL-CM4 and GFDL-ESM4, as well as the numerous scientists and technical staff at GFDL who contributed to the development of these models and conducted the CMIP6 simulations. SOCOL simulations have been performed at the ETH cluster EULER and Swiss National Supercomputing Centre (CSCS) under projects s1191 and s1144. We thank Urs Beyerle (IAC ETH) for support in acquiring and postprocessing the CMIP6 data. Jingyu Wang acknowledges support from Institute for Atmospheric and Climate Science at ETH Zurich, where most of this work was done. Jingyu Wang also acknowledges the support from the University of Arizona startup funds (PI: S. Ranjan). Support for Gabriel Chiodo was provided by the Swiss National Science Foundation within the Ambizione grant no. PZ00P2_180043, the European Research Council within the ERC StG project no. 101078127, and the Spanish Ministry of Science and Innovation via the Ramon y Cajal grant no. RYC2021-033422-I. Support for Sandro Vattioni was provided by the ETH Research grant no. ETH-1719-2 as well as by the Harvard Geoengineering Research Program. Sandro Vattioni also received funding from the Simons Foundation (grant no. SFI-MPS-SRM-00005217). Timofei Sukhodolov acknowledges the support from the Swiss National Science Foundation (grants nos. 200020E_219166 and 200021L-228149) and the Karbacher Fonds, Graubünden, Switzerland. Timofei Sukhodolov and Gabriel Chiodo also acknowledge the support from the Simons Foundation (SFI-MPS-SRM-00005208). Birgit Hassler acknowledges the support from the European Union's Horizon 2020 research and innovation program under grant agreement no. 101003536 (ESM2025 – Earth System Models for the Future). Blanca Ayarzagüena acknowledges support from the project Stratospheric Ozone recovery in the Northern Hemisphere under climate change (RecO3very): PID2021-124772OB-I00 from the Spanish Ministry of Science and Innovation. Financial support This research has been supported by the Schweizerischer Nationalfonds zur Förderung der Wissenschaftlichen Forschung (Ambizione grant nos. PZ00P2_180043 and 200020E_219166), the European Research Council, HORIZON EUROPE European Research Council (ERC StG project no. 101078127) and Horizon 2020 (grant no. 101003536), the Ministerio de Ciencia e Innovación (Ramon y Cajal grant nos. RYC2021-033422-I and PID2021-124772OB-I00), the Eidgenössische Technische Hochschule Zürich (ETH Research grant no. ETH-1719-2), and the Simons Foundation (grant nos. SFI-MPSSRM-00005217 and SFI-MPS-SRM-00005208)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Observational data for next-generation climate model evaluation: Requirements, considerations, and best practices

  • Beadling, Rebecca L.
  • Swaminathan, Ranjini
  • Brands, Swen
Beadling, Rebecca L.: et al., Climate model simulations are an important source of information about our planet’s climate system and also enable informed decision-making under different future scenarios. As a new archive of results from the next generation of climate models is anticipated to become available with the Coupled Model Intercomparison Project phase 7 (CMIP7), the need to develop efficient and robust methods to evaluate models is paramount. Observations are an integral part of model evaluation, providing a means to quantify and understand the degree to which climate models can faithfully reproduce Earth system processes. Such analysis is critical for constraining climate projections, identifying areas of focus for model development, and assisting analysts in deciphering the utility of models for specific applications. Observations of Earth system come from a diversity of sources, span different space–time domains, and are produced by different communities, and each dataset features different data structures and formats, metadata standards, and its own unique uncertainties. Uncertainties in an observational dataset may stem from gaps in temporal and spatial coverage, instrumentation errors, or assumptions in retrieval and processing methods. How then does one ensure that observational data are ready for use and utilized in the most appropriate way for robust, rapid, and routine climate model evaluation? The CMIP7 Model Benchmarking Task Team with input from the broader climate modeling, model evaluation, and observational data communities present a vision and considerations for best practices toward the optimal and appropriate use of observational data to support next-generation climate model evaluation., [Significance Statement] Computer models that simulate Earth system, known as climate models, are important tools for understanding how climate processes work and provide estimates of the climate system in the past and the future. Policy decisions regarding how to adapt to and limit the impact of climate change rely on these models, and it is, therefore, important to know how well they capture the real world. Real-world observations play an important role in understanding how well climate models represent Earth’s climate system. We describe various aspects of using observations for model evaluation and suggest best practices to make this process more efficient, accurate, and inclusive of a wider number of observed phenomena. Considerations and best practices are presented for the use of observations in climate model evaluation. The discussion centers on practices to support next-generation evaluation for Coupled Model Intercomparison Project simulations., R. L. Beadling was supported under NSF Division of Polar Programs Grant NSF2319828 and NOAA Award NA24OARX431C0057-T1-01. R. Swaminathan was funded by the U.K. Research Infrastructure Natural Environment Research Council (UKRI-NERC) funded TerraFIRMA: Future Impacts, Risks and Mitigation Actions in a changing Earth system Grant (NE/W004895/1) and by ESA from the project Exploiting Satellite Observations for climate model analysis (ESO4clima) under Contract 4000147360/25/I-LR. F. M. Hoffman was supported by the Reducing Uncertainties in Biogeochemical Interactions through Synthesis and Computation (RUBISCO) Science Focus Area, which is sponsored by the Regional and Global Model Analysis (RGMA) activity of the Earth and Environmental Systems Modeling (EESM) Program in the Earth and Environmental Systems Sciences Division (EESSD) of the Office of Biological and Environmental Research (BER) in the U.S. Department of Energy Office of Science. Oak Ridge National Laboratory (ORNL) is managed by UT-Battelle, LLC, for the U.S. Department of Energy under Contract DE-AC05-00OR22725. Work of J. Lee is performed under auspices of the U.S. Department of Energy (DOE) by Lawrence Livermore National Laboratory (LLNL) under Contract DE-AC52-07NA27344, and effort was supported by the RGMA program of the U.S. DOE’s Office of Science (OS), BER program. E. Blockley was supported by the Met Office Hadley Centre Climate Programme funded by DSIT. B. Hassler was supported by the European Union’s Horizon 2020 research and innovation programme under Grant Agreement 101003536 (ESM2025—Earth system models for the Future) and by ESA from the project ESO4clima under Contract 4000147360/25/I-LR. B. Medeiros acknowledges support by the U.S. DOE RGMA under Award DE-SC0022070 and NSF IA 1947282 and support by the National Center for Atmospheric Research, which is a major facility sponsored by the NSF under Cooperative Agreement 1852977. S. Brands was supported by the Spanish “Generación de Conocimineto, Convocatoria 2024” project “Contribución Española al Atlas del IPCC-AR7: Desarollo y Problemas Científicos” (PID2024-162703OB-I00), funded by MCIN/AEI/10.13039/501100011033 and by ERDF/EU. E. Scoccimarro gratefully acknowledges the support of the ObsSea4Clim, Ocean observations and indicators for climate and assessments project. Grant Agreement 101136548. J. Tjiputra acknowledges Research Council of Norway funded infrastructure project Infrastructure for Norwegian Earth System Modelling phase 2 (INES2; 350390). D. Watson-Parris acknowledges funding from U.S. National Science Foundation Award 2441832. B. Turner is with the CMIP IPO which is hosted by the European Space Agency, with staff provided on contract by HE Space Operations Ltd. The work of D. Hegedus was supported by the Science and Technology Facilities Council through a graduate placement at the CMIP IPO. The Earth System Grid Federation (ESGF) is an international consortium of individually funded data provider institutions; the ESGF2-U.S. Project in the United States of America is sponsored by the Data Management Program in EESSD of BER in the U.S. Department of Energy Office of Science, and the ESGF activity in the United Kingdom is supported by the Centre for Environmental Data Analysis (CEDA), which is sponsored by the Science and Technology Facilities Council (STFC) and the Natural Environment Research Council (NERC)., Peer reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Evaluation of native Earth system model output with ESMValTool v2.6.0

  • Schlund, Manuel
  • Hassler, Birgit
  • Lauer, Axel
  • Andela, Bouwe
  • Jöckel, Patrick
  • Loosveldt Tomas, Saskia
  • Vegas Regidor, Javier
Earth system models (ESMs) are state-of-the-art climate models that allow numerical simulations of the past, present-day, and future climate. To extend our understanding of the Earth system and improve climate change projections, the complexity of ESMs heavily increased over the last decades. As a consequence, the amount and volume of data provided by ESMs has increased considerably. Innovative tools for a comprehensive model evaluation and analysis are required to assess the performance of these increasingly complex ESMs against observations or reanalyses. One of these tools is the Earth System Model Evaluation Tool (ESMValTool), a community diagnostic and performance metrics tool for the evaluation of ESMs. Input data for ESMValTool needs to be formatted according to the CMOR (Climate Model Output Rewriter) standard, a process that is usually referred to as “CMORization”. While this is a quasi-standard for large model intercomparison projects like the Coupled Model Intercomparison Project (CMIP), this complicates the application of ESMValTool to non-CMOR-compliant climate model output. In this paper, we describe an extension of ESMValTool introduced in v2.6.0 that allows seamless reading and processing of “native” climate model output, i.e., operational output produced by running the climate model through the standard workflow of the corresponding modeling institute. This is achieved by an extension of ESMValTool's preprocessing pipeline that performs a CMOR-like reformatting of the native model output during runtime. Thus, the rich collection of diagnostics provided by ESMValTool is now fully available for these models. For models that use unstructured grids, a further preprocessing step required to apply many common diagnostics is regridding to a regular latitude–longitude grid. Extensions to ESMValTool's regridding functions described here allow for more flexible interpolation schemes that can be used on unstructured grids. Currently, ESMValTool supports nearest-neighbor, bilinear, and first-order conservative regridding from unstructured grids to regular grids. Example applications of this new native model support are the evaluation of new model setups against predecessor versions, assessing of the performance of different simulations against observations, CMORization of native model data for contributions to model intercomparison projects, and monitoring of running climate model simulations. For the latter, new general-purpose diagnostics have been added to ESMValTool that are able to plot a wide range of variable types. Currently, five climate models are supported: CESM2 (experimental; at the moment, only surface variables are available), EC-Earth3, EMAC, ICON, and IPSL-CM6. As the framework for the CMOR-like reformatting of native model output described here is implemented in a general way, support for other climate models can be easily added., The development of ESMValTool is supported by the projects “Climate-Carbon Interactions in the Current Century” (4C; grant agreement no. 821003), “Earth System Models for the Future” (ESM2025; grant agreement no. 101003536), “Infrastructure for the European Network for Earth System Modelling - Phase 3” (IS-ENES3; grant agreement no. 824084), and the European Research Council (ERC) Synergy Grant “Understanding and Modelling the Earth System with Machine Learning” (USMILE; grant agreement no. 855187) under the European Union's Horizon 2020 Research and Innovation Programme. This study is a contribution to the project S1 of the Collaborative Research Centre TRR 181 “Energy Transfers in Atmosphere and Ocean” funded by the Deutsche Forschungsgemeinschaft (DFG, German Research Foundation) (project no. 274762653). Brian Medeiros acknowledges support by the U.S. Department of Energy (award no. DE-SC0022070), the National Science Foundation (NSF) (IA 1947282), the National Center for Atmospheric Research, which is a major facility sponsored by the NSF (cooperative agreement no. 1852977), and the National Oceanic and Atmospheric Administration (award no. NA20OAR4310392). Tobias Stacke acknowledges funding support from the European Research Council (ERC) under the European Union's Horizon 2020 Programme (grant agreement no. 951288). This work used resources of the Deutsches Klimarechenzentrum (DKRZ) granted by its Scientific Steering Committee (WLA) under the project IDs bd0854, bd1179, and id0853. We acknowledge the World Climate Research Programme (WCRP), which, through its Working Group on Coupled Modeling, coordinated and promoted CMIP6. We thank the climate modeling groups for producing and making their model output available, the Earth System Grid Federation (ESGF) for archiving the data and providing access, and the multiple funding agencies who support CMIP and ESGF. We would like to thank Mattia Righi (DLR) for providing helpful comments about the manuscript., Peer Reviewed, "Article signat per 15 autors/es:Manuel Schlund, Birgit Hassler, Axel Lauer, Bouwe Andela, Patrick Jöckel, Rémi Kazeroni, Saskia Loosveldt Tomas, Brian Medeiros, Valeriu Predoi, Stéphane Sénési, Jérôme Servonnat, Tobias Stacke, Javier Vegas-Regidor, Klaus Zimmermann, and Veronika Eyring"
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Evaluation of native Earth system model output with ESMValTool v2.6.0

  • Schlund, Manuel
  • Hassler, Birgit
  • Lauer, Axel
  • Andela, Bouwe
  • Jöckel, Patrick
  • Loosveldt Tomas, Saskia
  • Vegas Regidor, Javier
Earth system models (ESMs) are state-of-the-art climate models that allow numerical simulations of the past, present-day, and future climate. To extend our understanding of the Earth system and improve climate change projections, the complexity of ESMs heavily increased over the last decades. As a consequence, the amount and volume of data provided by ESMs has increased considerably. Innovative tools for a comprehensive model evaluation and analysis are required to assess the performance of these increasingly complex ESMs against observations or reanalyses. One of these tools is the Earth System Model Evaluation Tool (ESMValTool), a community diagnostic and performance metrics tool for the evaluation of ESMs. Input data for ESMValTool needs to be formatted according to the CMOR (Climate Model Output Rewriter) standard, a process that is usually referred to as “CMORization”. While this is a quasi-standard for large model intercomparison projects like the Coupled Model Intercomparison Project (CMIP), this complicates the application of ESMValTool to non-CMOR-compliant climate model output. In this paper, we describe an extension of ESMValTool introduced in v2.6.0 that allows seamless reading and processing of “native” climate model output, i.e., operational output produced by running the climate model through the standard workflow of the corresponding modeling institute. This is achieved by an extension of ESMValTool's preprocessing pipeline that performs a CMOR-like reformatting of the native model output during runtime. Thus, the rich collection of diagnostics provided by ESMValTool is now fully available for these models. For models that use unstructured grids, a further preprocessing step required to apply many common diagnostics is regridding to a regular latitude–longitude grid. Extensions to ESMValTool's regridding functions described here allow for more flexible interpolation schemes that can be used on unstructured grids. Currently, ESMValTool supports nearest-neighbor, bilinear, and first-order conservative regridding from unstructured grids to regular grids. Example applications of this new native model support are the evaluation of new model setups against predecessor versions, assessing of the performance of different simulations against observations, CMORization of native model data for contributions to model intercomparison projects, and monitoring of running climate model simulations. For the latter, new general-purpose diagnostics have been added to ESMValTool that are able to plot a wide range of variable types. Currently, five climate models are supported: CESM2 (experimental; at the moment, only surface variables are available), EC-Earth3, EMAC, ICON, and IPSL-CM6. As the framework for the CMOR-like reformatting of native model output described here is implemented in a general way, support for other climate models can be easily added., The development of ESMValTool is supported by the projects “Climate-Carbon Interactions in the Current Century” (4C; grant agreement no. 821003), “Earth System Models for the Future” (ESM2025; grant agreement no. 101003536), “Infrastructure for the European Network for Earth System Modelling - Phase 3” (IS-ENES3; grant agreement no. 824084), and the European Research Council (ERC) Synergy Grant “Understanding and Modelling the Earth System with Machine Learning” (USMILE; grant agreement no. 855187) under the European Union's Horizon 2020 Research and Innovation Programme. This study is a contribution to the project S1 of the Collaborative Research Centre TRR 181 “Energy Transfers in Atmosphere and Ocean” funded by the Deutsche Forschungsgemeinschaft (DFG, German Research Foundation) (project no. 274762653). Brian Medeiros acknowledges support by the U.S. Department of Energy (award no. DE-SC0022070), the National Science Foundation (NSF) (IA 1947282), the National Center for Atmospheric Research, which is a major facility sponsored by the NSF (cooperative agreement no. 1852977), and the National Oceanic and Atmospheric Administration (award no. NA20OAR4310392). Tobias Stacke acknowledges funding support from the European Research Council (ERC) under the European Union's Horizon 2020 Programme (grant agreement no. 951288). This work used resources of the Deutsches Klimarechenzentrum (DKRZ) granted by its Scientific Steering Committee (WLA) under the project IDs bd0854, bd1179, and id0853. We acknowledge the World Climate Research Programme (WCRP), which, through its Working Group on Coupled Modeling, coordinated and promoted CMIP6. We thank the climate modeling groups for producing and making their model output available, the Earth System Grid Federation (ESGF) for archiving the data and providing access, and the multiple funding agencies who support CMIP and ESGF. We would like to thank Mattia Righi (DLR) for providing helpful comments about the manuscript., Peer Reviewed, "Article signat per 15 autors/es:Manuel Schlund, Birgit Hassler, Axel Lauer, Bouwe Andela, Patrick Jöckel, Rémi Kazeroni, Saskia Loosveldt Tomas, Brian Medeiros, Valeriu Predoi, Stéphane Sénési, Jérôme Servonnat, Tobias Stacke, Javier Vegas-Regidor, Klaus Zimmermann, and Veronika Eyring", Postprint (published version)
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Potential impacts of pandemics on global warming, agricultural production, and biodiversity loss

  • Xiong, Yuankang
  • Wang, Rong|||0000-0003-1962-0165
  • Gasser, Thomas|||0000-0003-4882-2647
  • Ciais, Philippe|||0000-0001-8560-4943
  • Peñuelas, Josep|||0000-0002-7215-0150
  • Sardans i Galobart, Jordi|||0000-0003-2478-0219
  • Clark, James H.|||0000-0002-5860-2480
  • Cao, Junji
  • Xing, Xiaofan
  • Xu, Siqing
  • Deng, Yifei
  • Wang, Lin|||0000-0002-4905-3432
  • Chen, Jianmin|||0000-0001-5859-3070
  • Tang, Xu
  • Zhang, Renhe|||0000-0001-7750-8679
The rising frequency of infectious diseases under climate change poses an emerging threat to environmental and agricultural sustainability by consuming large quantities of materials. The demand for crops to produce personal protective equipment (PPE) competes for land and fertilizers, leads to cropland expansion, and accelerates climate change, but the ecological impacts remain unclear. Here we explore the impacts of pandemics on global warming, agricultural production, and biodiversity loss in an Earth system model by developing relationships between consumption of PPE and the rate of infection during COVID-19. Meeting the demand for PPE would increase production of cotton lint, corn, and natural rubber, which accelerates global warming by 0.2°C with 1.8% additional species losses by 2100. Our results suggest that the risks of public health, food security, climate change, and ecological integrity have been connected to each other, which should be considered when predicting the impacts of future pandemics.