Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 6
Encontrada(s) 1 página(s)

Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Criticality and recyclability assessment of car parts—A thermodynamic simulation-based approach

  • Iglesias-Émbil, Marta
  • Abadías, Alejandro
  • Valero, Alicia
  • Calvo, Guiomar
  • Reuter, Markus Andreas
  • Ortego, Abel
Using a thermodynamic approach, this paper identifies the most critical parts of a car, considering their composition. A total of 11 car parts that contain valuable and scarce materials have been selected using thermodynamic rarity, an indicator that helps assess elements and minerals in exergy terms according to their relative scarcity in the crust and the energy required to extract and refine them. A recyclability analysis using a product-centric approach was then undertaken using dedicated software, HSC Chemistry. To that end, the dismantling of these car parts into three main fractions was performed. Each car part was divided into non-ferrous, steel, and aluminum flows. A general metallurgical process was developed and simulated for each flow, including all the required equipment to extract most of the minor but valuable metals. Of the 11 parts, only 7 have a recyclability potential higher than 85%. By treating these selected car parts appropriately, the raw materials’ value recovered from the car can increase by 6%. The approach used in this paper can help provide guidelines to improve the eco-design of cars and can also be applied to other sectors. Ultimately, this paper uniquely introduces simulation-based thermodynamic rarity analysis for thermodynamic based product “design for recycling”.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Exergy Assessment of Plastic Car Parts

  • Ortego, Abel
  • Russo, Sofia
  • Iglesias-Émbil, Marta
  • Valero, Alicia
  • Magdalena, Ricardo
Light-duty vehicles are increasingly incorporating plastic materials to reduce production costs and achieve lightweight designs. On average, a conventional car utilizes over 200 kg of plastic, comprising more than 23 different types, which often present challenges for recycling due to their incompatibility. Consequently, the focus on plastic recycling in end-of-life vehicles has intensified. This study aims to analyze critical car parts based on the plastics used, employing a novel thermodynamic approach that examines the embodied exergy (EE) of different plastics. Six vehicles from various segments, years, and equipment levels were assessed to understand their plastic compositions. The findings reveal that, on average, a vehicle contains 222 kg of plastic, accounting for 17.7% of its total weight. Among these plastics, 47.5% (105 kg) are utilized in car parts weighing over 1 kg, with plastics comprising over 80% of the part’s weight. The identified critical car parts include the front door trim panel, front and rear covers, fuel tank, floor covering, front lighting, dashboard, rear door trim panel, plastic front end, backrest pad, door trim panel pocket, plastic foam rear seat, rear lighting, window guide, molded headliner, bulkhead sound insulation, foam seat part, and wheel trim. Regarding their contribution to EE, the plastics with the highest shares are polypropylene—PP (24.5%), polypropylene and ethylene blends—E/P (20.3%), and polyurethane- PU (15.3%). Understanding the criticality of these car parts and their associated plastics enables targeted efforts in design, material selection, and end-of-life management to enhance recycling and promote circularity within the automotive industry.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Disassemblability Assessment of Car Parts: Lessons Learned from an Ecodesign Perspective

  • Ortego, Abel
  • Iglesias-Émbil, Marta
  • Valero, Alicia
  • Gimeno-Fabra, Miquel
  • Monné, Carlos
  • Moreno, Francisco
A conventional vehicle requires more than 50 different metals in its manufacturing, most of which are critical. Given this circumstance, enhancing sustainability from a raw materials perspective requires improvements in the disassemblability of car parts. This enhancement aims to yield metal-rich fractions, enabling the application of effective recycling processes for the recovery of critical metals. This helps avoid the downcycling that occurs in conventional shredding processes. The present study was undertaken to analyze the challenges associated with disassembling components of significant value due to their metal content. The methodology comprises two distinct main stages: an identification of critical car parts and an assessment of disassemblability. The selection of car parts was determined by the criticality of each one through the thermodynamic rarity indicator. Disassemblability was studied experimentally, encompassing three different levels. This classification defines the stages from extracting parts from the vehicle and obtaining recycling fractions in their purest form: ferrous metals, aluminum, non-ferrous metals excluding aluminum, and plastics. This methodology was implemented on two vehicles manufactured by SEAT: SEAT Leon models II and III. As a result, not only was disassemblability information about these car parts collected, but several ecodesign recommendations were also identified as valuable guidance for future designs, specifically aimed at enhancing metals’ recyclability. In conclusion, it must be acknowledged that contemporary vehicle design often prioritizes cost-effective manufacturing processes. However, this approach may compromise the disassemblability and recyclability of the product. The ongoing transition to electric vehicles necessitates a re-evaluation of design principles, particularly from the perspective of the circular economy.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Evolution in the content of strategic metals in a passenger car and its implications for the circular economy

  • Iglesias-Émbil, Marta
  • Ortego, Abel
  • Valero, Alicia
  • Villalba, Gara
Several studies have been published in recent years that analyze the strategic metal content in passenger cars. Nonetheless, they indicate the metal composition of a particular car's generation. However, an important question is how this metal composition evolves over generations. Thus, in this study, for the first time, the evolution of the demand for metals in a specific car over the last decade is analyzed, revealing consumption trends in the automotive sector. This assessment is carried out for 12 car configurations in terms of mass as well as thermodynamic rarity, an indicator reflecting resource use. One of the main conclusions of our work is that, despite relevant metal content reduction strategies, the metal content in cars has increased over time because of the rise of electronics and more powerful engines. Approximately 50 metals are contained in a conventional car, and 35, particularly aluminum and copper, have increased in content over generations. Moreover, although the amount of gold and tantalum has decreased in car electronics due to miniaturization, the quantity of many minor metals, such as alloying elements and rare earths in actuators, has substantially increased. Hence, this confirms the necessity of applying the rarity indicator in the resource assessment. On the basis of these results, designs for circularity recommendations for future car models are drawn, such as redesigning the electronic architecture, reducing the number of different steel alloys, or introducing recycled aluminum. Overall, the proposed measures imply a significant change in car design, highlighting the necessity of developing a circular economy within the automotive industry.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Evaluating the recyclability of electronic car parts through disassemblability, thermodynamic and metallurgical analyses

  • Alcoceba-Pascual, Samuel
  • Ortego, Abel
  • Villanueva-Martínez, Nicolás I.
  • van Schaik, Antoinette
  • Reuter, Markus A.
  • Iglesias-Émbil, Marta
  • Valero, Alicia
In the manufacturing of conventional cars, more than 50 different metals are utilized, many of which are categorized as critical or strategic. These metals are predominantly found in significant quantities within electronic car parts, necessitating specialized recycling methods for their recovery. However, conventional shredding processes often result in the downcycling of valuable metals into steel or aluminum alloys, or their disposal in landfills. To address this, a novel methodology is introduced, based on thermodynamic and metallurgical principles. It combines the Thermodynamic Rarity indicator with disassembly analysis and metallurgical process compatibility. By identifying valuable subparts and assessing dismantling costs, appropriate metallurgical processes can be designed to maximize the recovery of strategic metals. This methodology is demonstrated through three recycling scenarios— (1) shredding, (2) car dismantling, and (3) part disassembly— applied to the Combimeter and Infotainment system of a SEAT Leon Generation II model. Tailored metallurgical processes are proposed to recover steel, copper, and their compatible metals. The results highlight the potential of this approach for improving resource efficiency. For instance, dismantling the Combimeter achieves a Mineral Capital recovery of up to 59 %, while part disassembly marginally improves recovery for the Infotainment system by only 2 % compared to the dismantling scenario. Nonetheless, a limitation of the current processes is their inability to recover certain critical metals, such as tantalum. This work demonstrates how integrating thermodynamic and metallurgical insights can inform recycling strategies and enhance the recovery of critical and strategic metals in automotive electronics.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Environmental Impacts of Recovering Li, Co, and Mn from Li-Ion Batteries via Hydrometallurgical Sulfuric Acid Processing

  • Magdalena, Ricardo
  • Palacios, Jose-Luis
  • Moreno, Katherine
  • Ascaso, Sonia
  • Endara, Diana
The global demand for metals has experienced a critical increase in recent decades, and this trend is anticipated to persist in the coming years. Notably, the electric and electronic devices (EEE) sector and the electric vehicle industry are emerging as significant contributors to this heightened demand. Within these domains, the key player in terms of metal consumption is the battery, with Lithium-ion (Li-ion) batteries being the predominant choice due to their efficiency. Several methods have been investigated to recover metals from Li-ion batteries, focusing on the recovery without assessing the impacts generated. To address this gap, an experimental analysis focused on the recovery of crucial metals found in smartphones and laptop batteries, including lithium (Li), cobalt (Co), and manganese (Mn) was conducted. Then, the life cycle assessment was undertaken to calculate the environmental impacts of the hydrometallurgical route by using sulfuric acid and to analyze the ecological footprint associated with the recycling process. The acquired experimental data served as a basis for simulating the recycling process using specialized software, HSC Chemistry. This simulation facilitated the process's scaling up and enabled optimization and precise calculation of reagents and water usage during recycling. Thus, this study not only explores the difficulties of recycling processes but also the impacts associated with them, offering valuable insights into the ongoing discussions around responsible and sustainable practices in response to the growing global demand for metals.