Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 3
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Enabling secure subsurface storage in future energy systems: an introduction

  • Miocic, J.
  • Heinemann, N.
  • Alcalde, Juan
  • Edlmann, K.
  • Schultz, R. A.
Geological structures in the subsurface have been used for the storage of energy and waste products for over a century. Depleted oil and gas fields, saline aquifers or engineered caverns in salt or crystalline rocks are used worldwide to store energy fluids intended to provide demand buffers and sustained energy supply. The transition of our energy system into a clean, renewable-based system will most likely require an expansion of these subsurface storage activities, to host a wide variety of energy products (e.g. natural gas, hydrogen, heat or waste energy products, like CO) to balance the inherent intermittence of the renewable energy supply. Ensuring the safety and effectiveness of these subsurface storage operations is therefore crucial to achieve the sought-after renewable energy transition while ensuring energy security., JM is funded by the research programme DeepNL (DEEP.NL.2019.003) which is partly financed by the Dutch Research Council (NWO). JA is funded by grant RYC2021-033872-I, funded by MCIN/AEI/10.13039/501100011033 and ESF ‘Investing in your future’. KE and NH are funded by Engineering and Physical Sciences Research Council (EPSRC) [Grant Number EP/S027815/1] (HyStorPor Project) and by funding from the Fuel Cells and Hydrogen 2 Joint Undertaking (now Clean Hydrogen Partnership) under grant agreement No 101006632. This Joint Undertaking receives support from the European Union’s Horizon 2020 research and innovation program, Hydrogen Europe and Hydrogen Europe Research, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Hydrogen wettability and capillary pressure in Clashach sandstone for underground hydrogen storage

  • Thaysen, Eike M.
  • Jangda, Zaid
  • Hassanpouryouzband, Aliakbar
  • Menke, Hannah
  • Singh, Kamaljit
  • Butler, Ian B.
  • Heinemann, Niklas
  • Edlmann, Katriona
Hydrogen (H2) can support the transition to net-zero carbon (C) emissions by facilitating increased renewable energy use by acting as an energy store to balance supply and demand. Underground H2 storage in porous media is investigated due to its high capacity and economical price. An important unknown in underground porous media H2 storage is the volume of recoverable H2 which is partly controlled by the H2 wettability. Current H2 contact angle data in sandstone systems span large ranges and fall short of clarifying if H2 wettability changes with pressure. We computed novel in-situ receding and advancing contact angles for the H2-brine-Clashach sandstone system at pore fluid pressures of 2–7 MPa and for nitrogen (N2)-brine-Clashach sandstone at 5 MPa, based on X-ray microtomography images of gas displacement and trapping in Clashach sandstone. A centrifuge analysis of the capillary pressure (Pc) at varying water saturations was conducted for N2. The H2 Pc curve was derived from the N2 Pc, the N2 wettability measurements, and existing information on the density differential between brine and H2 and N2, and the interfacial tensions of these gases. The results show no change of the H2-brine-Clashach sandstone contact angles within the examined pressure range, with mean receding (drainage) and advancing (imbibition) contact angles of 61° ± 24–26° and 58° ± 20–22°, respectively, at all pore fluid pressures, indicating a water-wet rock and implying that based on the wettability alone, no decrease in H2 recovery with increasing pressure (i.e. reservoir depth) is expected. While residual trapping was consistent with trapping in water-wet systems, the observed increase in residual trapping at 7 MPa requires further investigation. Alignment with other wettability studies in sandstone systems indicates that for contact angles around 60–70°, wettability may not always be the main control for the H2 saturation in the pore space but that H2 dissolution and channeling events may significantly affect those parameters. Further, contact angle measurements in artificial systems significantly underestimate in-situ contact angles as provided by this study, highlighting the need for microtomography-based wettability investigations. We found relatively low irreducible water saturations of 12.6–14.0 % at H2 Pc of 0.43 MPa, suggesting a favorable H2 relative permeability in Clashach and high H2 storage capacity. Our results provide detailed insights into the controls on H2 displacement and capillary trapping as well as crucial input parameters for the modelling and design of H2 storage operations in porous media., Thaysen, Butler, Heinemann, Hassanpouryouzband and Edlmann gratefully acknowledge the funding support from the Engineering and Physical Science Research Council (EPSRC) HyStorPor project [grant number EP/S027815/1] and from the Fuel Cells and Hydrogen 2 Joint Undertaking (JU) under grant agreement No 101006632. The JU receives support from the European Union's Horizon 2020 research and innovation program and Hydrogen Europe and Hydrogen Europe Research., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Time-resolved 2D and 3D imaging of hydrogen and brine displacement processes in porous Clashach sandstone

  • Thaysen, Eike M.
  • Butler, Ian B.
  • Hassanpouryouzband, Aliakbar
  • Spurin, Catherine
  • Freitas, Damien
  • Rizzo, Roberto
  • Alvarez-Borges, Fernando
  • Atwood, Robert
  • Edlmann, Katriona
Hydrogen (H2) storage in porous geological formations offers a promising means to balance supply and demand in the renewable energy sector, supporting the energy transition. Important unknowns to this technology include the H2 fluid flow dynamics through the porous medium which affect H2 injectivity and recovery. We used time-resolved X-ray computed microtomography to image real-time unsteady and steady state injections of H2 and brine (2 M KI) into a Clashach sandstone core at 5 MPa and ambient temperature. In steady state injections, H2 entered the brine-saturated rock within seconds, dispersing over several discrete pores. Over time, some H2 ganglia connected, disconnected and then reconnected from each other (intermittent flow), indicating that the current presumption of a constant connected flow pathway during multiphase fluid flow is an oversimplification. Pressure oscillations at the sample outlet were characterized as red noise, supporting observations of intermittent pore-filling. At higher H2 fractional flow the H2 saturation in the pore space increased from 20-22 % to 28 %. Average Euler characteristics were generally positive over time at all H2 flow fractions, indicating poorly connected H2 clusters and little control of connectivity on the H2 saturation. In unsteady state injections, H2 displaced brine in sudden pore-filling events termed Haines jumps, which are key to understanding fluid dynamics in porous media. Our results suggest a lower H2 storage capacity in sandstone aquifers with higher injection-induced hydrodynamic flow and suggest a low H2 recovery. For more accurate predictions of H2 storage potential and recovery, geological models should incorporate energy-dissipating processes such as Haines jumps., Thaysen, Butler, Hassanpouryouzband and Edlmann gratefully acknowledge the funding support from the Engineering and Physical Science Research Council (EPSRC) HyStorPor project [grant number EP/S027815/1] and from the Fuel Cells and Hydrogen Joint Undertaking (JU) under grant agreement no. 101006632. The JU receives support from the European Union's Horizon 2020 research and innovation programme and Hydrogen Europe and Hydrogen Europe Research. Freitas is supported by an AFOSR/EOARD grant (FA8655-21-1-7005). This work was enabled and carried out with the support of Diamond Light Source, Beamline I12-JEEP 101006632 (proposal mg26730-1). We would like to thank Thomas Connolley for any correspondence and help with setting up the experiments at Diamond Light Source, and Samuel C. Krevor at Imperial College for helpful discussions around the data visualization and interpretation., Peer reviewed