Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 4
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Preface: State of the art in mineral exploration

  • Alcalde, Juan
  • Carbonell, Ramón
  • Pospiech, Solveig
  • Gil, Alba
  • Bullock, Liam A.
  • Tornos, F.
Minerals that comprise raw materials for energy, metal, construction and other industrial applications are considered strategic commodities, fundamental in stock markets worldwide, and key ingredients to sustain our ever more technology-based society (Wellmer et al., 2019). The utilization of such economically important minerals has shown a continued steady increase since the early twentieth century, with a greater focus in recent years on resources required for the development of renewable technologies, such as wind and solar operations, and for electrification of domestic and transportation systems (e.g. concrete, aluminium, chromium, copper, iron, manganese, molybdenum, nickel, zinc or rare earths) (Meinert et al., 2016). As our society ramps up the global transition to low-carbon energies and a reduced reliance on fossil fuels, the inevitable rise in consumption and demand for a more diverse range of resources can only be facilitated through increasingly novel methods of mineral exploration (Ali et al., 2017)., Juan Alcalde is funded by the Spanish Ministry of Science and Innovation through the Juan de la Cierva fellowship (IJC 2018-036074-I), funded by MCIN/AEI/10.13039/501100011033. Juan Alcalde, Ramon Carbonell and Alba Gil were funded under the EIT-RawMaterials project 17024 (SIT4ME: Seismic Imaging Techniques for Mineral Exploration). Fernando Tornos and Solveig Pospiech are funded by the NEXT (New Exploration Technologies, Contract 776804 H2020). Liam A. Bullock is funded under H2020-EU.1.3.2. (DETAILS Project, grant agreement ID: 101018312)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Experimental investigation of multiple industrial wastes for carbon dioxide removal strategies

  • Bullock, Liam A.
  • Fernandez-Turiel, J. L.
  • Benavente, David
Industrial solid waste by-products are being increasingly employed for geochemical carbon dioxide removal (CDR) strategies due to their fine grain size, accessibility, and large annual production tonnages. Here, a range of such by-products has been tested experimentally for their reactivities with CO and water. Sample solutions were monitored for 100 h for changes in chemistry, and solid samples were characterised pre- and post-experiment. Samples rich in Ca- and Mg-bearing minerals, such as dunite, kimberlite, and ilmenite mine tailings, as well as marble quarry cuttings, were key cation sources. Ni sulphide, fluorite and borax tailings, coal-fired power plant fly ashes, and red mud samples showed high dissolution rates. The highest reaction rates were often observed during the initial few hours, and compared well to rates determined for rocks typically targeted for CDR purposes, such as basalt and gabbro. Several samples also showed secondary carbonate precipitation, suggesting opportunities for the development of single-step CDR technologies. Overall, the results of this study indicate that several industrial by-products can provide sufficient cations at favourable dissolution rates for geochemical CDR purposes. Any on-site or near-site conditions for reaction acceleration such as heat, concentrated CO or microbes, could further increase favourability for geochemical CDR opportunities., LB and JLFT are funded under H2020-EU.1.3.2. (DETAILS Project, grant agreement ID: 101018312). The authors wish to thank Rio Tinto Group, Pasek Minerales, Atalaya Mining, Atlantic Copper, Minersa Group, and Ring of Fire Metals for their sample provision and project support.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Geochemical carbon dioxide removal potential of Spain.

  • Bullock, Liam A.
  • Alcalde, Juan
  • Tornos, F.
  • Fernandez-Turiel, J. L.
Many countries have made pledges to reduce CO2 emissions over the upcoming decades to meet the Paris Agreement targets of limiting warming to no >1.5 °C, aiming for net zero by mid-century. To achieve national reduction targets, there is a further need for CO2 removal (CDR) approaches on a scale of millions of tonnes, necessitating a better understanding of feasible methods. One approach that is gaining attention is geochemical CDR, encompassing (1) in-situ injection of CO2-rich gases into Ca and Mg-rich rocks for geological storage by mineral carbonation, (2) ex-situ ocean alkalinity enhancement, enhanced weathering and mineral carbonation of alkaline-rich materials, and (3) electrochemical separation processes. In this context, Spain may host a notionally high geochemical CDR capacity thanks to its varied geological setting, including extensive mafic-ultramafic and carbonate rocks. However, pilot schemes and large-scale strategies for CDR implementation are presently absent in-country, partly due to gaps in current knowledge and lack of attention paid by regulatory bodies. Here, we identify possible materials, localities and avenues for future geochemical CDR research and implementation strategies within Spain. This study highlights the kilotonne to million tonne scale CDR options for Spain over the rest of the century, with attention paid to chemically and mineralogically appropriate materials, suitable implementation sites and potential strategies that could be followed. Mafic, ultramafic and carbonate rocks, mine tailings, fly ashes, slag by-products, desalination brines and ceramic wastes hosted and produced in Spain are of key interest, with industrial, agricultural and coastal areas providing opportunities to launch pilot schemes. Though there are obstacles to reaching the maximum CDR potential, this study helps to identify focused targets that will facilitate overcoming such barriers. The CDR potential of Spain warrants dedicated investigations to achieve the highest possible CDR to make valuable contributions to national reduction targets., LB and JLFT are funded under H2020-EU.1.3.2. (DETAILS Project, grant agreement ID: 101018312). JA is funded by MCIN through the Juan de la Cierva Incorporación fellowship (IJC 2018-036074-I), supported by MCIN/AEI /10.13039/501100011033., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Modeling and Feasibility Assessment of Mineral Carbonation Based on Biological pH Swing for Atmospheric CO2 Removal

  • Zhang, Yukun
  • Long, Spencer
  • Duret, Manon T
  • Bullock, Liam A.
  • Lam, Phyllis
  • Yang, Aidong
[EN] Mitigating climate change requires both the reduction of greenhouse gas emissions and the removal of CO2 from the atmosphere. This study investigates a novel biological pH swing strategy for mineral carbonation at ambient conditions as a potential option for atmospheric CO2 removal. Through mathematical modeling, we evaluated a mineral carbonation system that utilized Desulfovibrio vulgaris and Acidithiobacillus thiooxidans to achieve alternating sulfur reduction and oxidation, respectively, with the cyclic process to effect pH swing for promoting the dissolution of a silicate mineral and the subsequent precipitation of a carbonate mineral to store CO2. Sulfur cycles employing two reduced compounds, namely, hydrogen sulfide and thiosulfate, were compared. Our simulation results predicted that it is feasible to use the sulfur cycles to achieve the intended pH swing in a range of 1-10 and hence the acceleration of CO2 removal from the air. Despite the implementation of the pH swing, gas-liquid mass transfer and mineral dissolution remained rate-limiting compared to biological conversion. Dissolving 35 kg of forsterite in a 1 m3 reactor takes between 250 and 300 h, leading to the removal of approximately 22 kg of CO2 through MgCO3 precipitation, which requires about 180 h. Between the two forms of reduced sulfur, thiosulfate would offer considerable operational advantages over hydrogen sulfide. This theoretical exploration also identified key areas to be investigated to further establish the potential of the sulfur-cycle-based carbonation approach to CO2 removal., The authors acknowledge the financial support by the Greenhouse Gas Removal by Enhanced Weathering (GGREW) project (grant Nos. NE/P01982X/1, NE/P019536/1) funded by the Natural Environment Research Council (NERC) of the United Kingdom. L.A.B. was additionally funded under H2020-EU.1.3.2 (DETAILS Project, grant agreement ID: 101018312)., Peer reviewed