Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 20
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Technical economic and environmental analysis of Chemical Looping versus oxyfuel combustion for NGCC power plant

  • Bartocci, Pietro
  • Abad Secades, Alberto
  • Cabello Flores, Arturo
  • Zampilli, Mauro
  • Buia, Giulio
  • Serra, Angela
  • Colantoni, Simone
  • Taiana, Andrea
  • Bidini, Gianni
  • Fantozzi, Francesco
11 figures, 5 tables.-- Work presented at the 76th Italian National Congress ATI (ATI 2021), The Power Sector is undergoing a rapid technological change with respect to implementation of low carbon technologies. The IEA Energy Outlook 2017 shows that the investments in Renewables for the first time are equal to those on the fossil sources. It is likely that the conventional gas turbines and internal combustion engines will need to be integrated in systems employing biofuels and/or CCUS (Carbon Capture Usage and Storage). Also, the European Union is moving rapidly towards low carbon technologies (i.e. Energy Efficiency, Smart Grids, Renewables and CCUS), see the Energy Union Strategy. Currently 28% of the installed power capacity in Europe is based on natural gas plants. Gas-based power capacity has reached 418 GW in 2016 and is likely to continue to grow in the future. To efficiently capture the carbon dioxide emissions generated by the combustion of natural gas in the combustion chamber a possible solution could be to adopt new combustion processes, like Chemical Looping Combustion. The combination of CLC and GTs can decrease the efficiency of a combined cycle power plant from 60% to about 40.34%. These performances influence costs and environmental burdens and this is also the same for oxyfuel combustion, which is a competing technology to realize CCS. This paper, starting from literature mass and energy balances of a conventional combined cycle, a combined cycle coupled with chemical looping combustor and a combined cycle coupled with oxyfuel combustion, calculates the reduction of CO2 emissions which can be achieved during the whole life cycle of the power plant and then identifies the value of the carbon credit which is needed to have an interesting payback period for such kind of investment., This work has been partially funded by the GTCLC-NEG project that has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No. 101018756.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Development of an innovative gas turbine Chemical Looping Combustor for carbon negative power generation

  • Bartocci, Pietro
Plenary conference delivered at the International Conference on Advances in Sustainable Research for Energy and Environmental Management (ASREEM-2021), August 06-08th, 2021.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Batch fluidized bed model in MFIX software for simulation of chemical looping combustion

  • Bartocci, Pietro
  • Abad Secades, Alberto
  • Obras-Loscertales, Margarita de las
  • Cabello Flores, Arturo
  • Taiana, Andrea
  • Joronen, T.
  • Konttinen, J.
  • Fantozzi, Francesco
Poster presented at the 18th Multiphase Flow Conference and Short Course: Simulation, Experiment and Application (Online), 8th-12th november 2021., Based on CFD modeling and detailed kinetics models a batch reactor is simulated in the framework of the Marie Curie project GTCLC-NEG., Marie Curie Individual Fellowship project, GTCLC-NEG.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Production and use of biochar from lignin and lignin-rich residues (such as digestate and olive stones) for wastewater treatment

  • Gul, Eid
  • Alrawashdeh, Khalideh Al Bkoor
  • Masek, Ondrej
  • Skreiberg, Øyvind
  • Corona, Andrea
  • Zampilli, Mauro
  • Wang, Liang
  • Samaras, Petros
  • Yang, Qing
  • Zhou, Hewen
  • Bartocci, Pietro
  • Fantozzi, Francesco
20 figures, 7 tables.-- Supplementary information available.-- © 2021. This manuscript version is made available under the CC-BY-NC-ND 4.0 license https://creativecommons.org/licenses/by-nc-nd/4.0/, Clean water is an essential resource for life, and its demand is continuously increasing with the rapid growth in population, while the freshwater reserves are also depleting. A large amount of wastewater is released by different industries, which is affecting the environment as well as polluting the freshwater reserves. Recycling and treatment of wastewater are highly essential to meet the demand for clean water and to protect the environment. Activated carbon can be used in primary, secondary and tertiary wastewater treatment steps. It can be used to capture pollutants which stop microbial activity or to produce clean water with high purity. About 3 million tons of activated carbon are produced per year and it is mainly used for fluid purification. The objective of this review is to investigate the preparation and production of biochar from lignin which is an important resource available in great quantities (about 100 Million tons per year) and the practical application of it for wastewater treatment. Biochar can be produced through pyrolysis (at temperatures of 600-700 °C) and hydrothermal carbonization (at temperature between 180-300 °C). Subsequent activation can be performed in two ways (physical and chemical), usually at temperatures between 600-800 °C. The quality of biochar and activated carbon produced from lignin-rich residue can be very high, even though the costs also are higher respect to other fossil derived materials (carbon black, lignite and pet coke)., The contribution of COST Action LignoCOST (CA17128), supported by COST (European Cooperation in Science and Technology), in promoting interaction, exchange of knowledge and collaborations in the field of lignin valorization is gratefully acknowledged. This work was developed during an STSM promoted by the e-COST European Cooperation in Science and Technology, among the UK Biochar research center at Edinburgh University UK, the BioCarbUp project at SINTEF Energy Research and the Biomass research center at Perugia University Italy. The Marie Curie GTCLC-NEG project that has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No. 101018756 is gratefully ackowledged. The 2014 Surfoly project: SUstainable Ruminants Feed with OLive pomace and polYphenols enriched charred olive stone, funded by the PRIMA program of the European Union is gratefully acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Integration of multiphase CFD models with detailed kinetics to understand the behavior of oxygen carriers under pressurized conditions

  • Bartocci, Pietro
  • Abad Secades, Alberto
  • Obras-Loscertales, Margarita de las
  • Pelucchi, Mattero
  • Taiana, Andrea
  • Yang, Haiping
  • Zhao, Haibo
  • Yang, Qing
  • Wang, Liang
  • Joronen, T.
  • Konttinen, J.
  • Sastre, Germán
  • Fantozzi, Francesco
1 figure, 2 tables.-- Work presented at the 13th International Conference on Applied Energy (ICAE2021). Virtual/Bangkok (Thailand), 29th november-5th december 2021. Paper ID: 039.-- Volume 22: Sustainable Energy Solutions for a Post-COVID Recovery towards a Better Future: Part V., The Power Sector is undergoing a rapid technological change with respect to implementation of low carbon technologies. The IEA Energy Outlook 2017 shows that the investments in Renewables for the first time are equal to those on the fossil sources. It is likely that the conventional gas turbines and internal combustion engines will need to be integrated in systems employing biofuels and/or CCUS (Carbon Capture Usage and Storage). Also, the European Union is moving rapidly towards low carbon technologies (i.e. Energy Efficiency, Smart Grids, Renewables and CCUS), see the Energy Union Strategy. This paper presents the basic for the design of CLC combustors to be coupled with gas turbines. Based on CFD modeling and detailed kinetics models., This work has been partially funded by the GTCLC-NEG project that has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No. 101018756., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Development of a tool to optimize economic and environmental feasibility of food waste chains

  • Celli, Irene
  • Brunori, Edoardo
  • Eugeni, Michele
  • Cristinariu, Cecilia A.
  • Zampilli, Mauro
  • Massoli, Sara
  • Bartocci, Pietro
  • Caldarelli, Valentina
  • Saetta, Stefano
  • Bidini, Gianni
  • Fantozzi, Francesco
11 figures, 6 tables.-- Supplementary information available., The Sustainable Development Goal 12.3 focuses on food and its inedible parts that exit the supply chain and thus are lost or wasted. This work addresses the food waste problem by presenting the development of a tool to design business models to reduce the production of food waste. This has been developed within the LIFE16 project iRexfo, coordinated by the University of Perugia. The tool aims at transferring the results obtained in a pilot region (Umbria, Italy) to 4 other regions in Europe. It has been coded in Python and has a graphical user interface (GUI) to insert inputs and display outputs. The GUI has been developed in FLASK and it is hosted in the website of PythonAnywhere. A case study on the application of the software is also presented, mainly based on data retrieved in the Umbria region, Italy. Together with economic analysis, also, environmental assessment is performed., Open Access funding provided thanks to the CRUE-CSIC agreement with Springer Nature. i-REXFO LIFE (LIFE16ENV/IT/000547) is a project funded by the EU under the LIFE 2016 program. This work has been partially funded by the GTCLC-NEG project that has received funding from the European Union’s Horizon 2020 research and innovation program under the Marie Sklodowska-Curie grant agreement No. 101018756., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

CFD modelling of the fuel reactor of a Chemical Loping Combustion plant to be used with biomethane

  • Bartocci, Pietro
  • Abad Secades, Alberto
  • Cabello Flores, Arturo
  • Obras-Loscertales, Margarita de las
  • Lu, Wang
  • Yang, Haiping
  • Fantozzi, Francesco
18 figures, 9 tables., To realize a carbon negative power production technology, it is interesting the option of coupling a Chemical Loping Combustor to a gas turbine. The development of this technology foreseen in the project GTCLC-NEG has some technical barriers, the most important of which is the operation of the chemical looping combustor at high temperature and high pressure conditions. To overcome these limits CFD modeling can be performed to optimize the behavior of the combustor and its design process. This work models the FUEL reactor of a chemical looping combustion plant working in batch mode and based on the reactor available at the Instituto de Carboquimica in Zaragoza, Spain. It is used an oxygen carrier mainly based on 60% mass Fe2O3 and 40% mass Al2O3. Biomethane is fed to the bottom of the fluidized bed with different velocities and mass flows and the composition of the gases at the outlet of the fuel reactor is measured. The results show that it is possible to model a 2 min duration reduction cycle by running the model for a time comprised between a minimum of 4 h and a maximum of 2 days of simulation. Another important result is the modeling of the chemical reactions happening in the reactor. Kinetics is modelled based on Activation energy (66 kJ/mol) and Pre-exponential factor (4.34 × 101 m3n mol−n s−1). The simple kinetic scheme gives reasonable first approximations and can be used to determine the duration of the reaction, the composition of the exhaust gases and the biofuel conversion., This work has been partially funded by the GTCLC-NEG project that has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No. 101018756., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Bioenergy with Carbon Capture and Storage (BECCS) developed by coupling a Pressurised Chemical Looping combustor with a turbo expander: How to optimize plant efficiency

  • Bartocci, Pietro
  • Abad Secades, Alberto
  • Mattisson, Tobias
  • Cabello Flores, Arturo
  • Obras-Loscertales, Margarita de las
  • Mendiara, Teresa
  • Zampilli, Mauro
  • Taiana, Andrea
  • Serra, Angela
  • Arauzo, Inmaculada
  • Cortes, Cristobal
  • Wang, Liang
  • Skreiberg, Øyvind
  • Yang, Haiping
  • Yang, Qing
  • Lu, Wang
  • Chen, Yingquan
  • Fantozzi, Francesco
18 figures, 6 tables.-- Supplementary information available., Carbon Capture and Storage is a technology of paramount importance for the fulfillment of the Sustainable Development Goal 7 (Affordable and Clean Energy) and the Sustainable Development Goal 5 (Climate Action). The European Union is moving rapidly towards low carbon technologies, for instance via the Energy Union Strategy. Coupling biofuels and carbon capture and storage to decarbonize the power and the industrial sector can be done through the development of BECCS (Bioenergy with Carbon Capture and Storage). Chemical Looping combustion is one of the cheapest way to capture CO2. A Chemical Looping Combustion (CLC) plant can be coupled with a turbo expander to convert energy to power, but it has to work in pressurised conditions. The effect of pressure on the chemical reactions and on fluidised bed hydrodynamics, at the moment, is not completely clear. The aim of this review is to summarize the most important highlights in this field and also provide an original method to optimize power plant efficiency. The main objective of our research is that to design a pressurised Chemical Looping Combustion plant which can be coupled to a turbo expander. To achieve this we need to start from the characteristics of the turbo expander itself (eg. the Turbine Inlet Temperature and the compression ratio) and then design the chemical looping combustor with a top down approach. Once the air and the fuel reactor have been dimensioned and the oxygen carrier inventory and circulation rate have been identified, the paper proposes a final optimization procedure based on two energy balances applied to the two reactors. The results of this work propose an optimization methodology and guidelines to be used for the design of pressurised chemical looping reactors to be coupled with turbo expanders for the production of power with carbon negative emissions., This work has been funded by the GTCLC-NEG project that has received funding from the European Union's Horizon 2020 Research and Innovation Programme under the Marie Sklodowska-Curie grant agreement No. 101018756., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Evaluation of the effect of pressure and heat transfer on the efficiency of a batch fuel reactor, using Iron-based Oxygen Carrier with a CFD model

  • Lu, Wang
  • Bartocci, Pietro
  • Abad Secades, Alberto
  • Cabello Flores, Arturo
  • Obras-Loscertales, Margarita de las
  • Mendiara, Teresa
  • Wang, Liang
  • Chen, Qi
  • Chen, Yingquan
  • Wang, Xianhua
  • Yang, Haiping
  • Chen, Hanping
  • Zampilli, Mauro
  • Fantozzi, Francesco
19 figures, 4 tables., Coupling a Chemical Looping Combustor fed with biofuels with a turbo expander is a promising Negative Emissions Technology (NET) to realize climate neutral targets in China and Europe. This is also an example of Bioenergy with Carbon Capture and Storage (BECCS) technology. To realize it, we need a Pressurized Chemical Looping Combustion process (PCLC). In this work, a Eulerian-Lagrangian hybrid model is developed in Barracuda-VRTM software, incorporating chemical reactions to predict the performance of a Fuel Reactor using Fe2O3 as oxygen carrier and syngas as fuel, under different pressures, ranging from 1 bar to 20 bars. The model predicted the conversion efficiency of syngas reduction using an iron-based oxygen carrier (Fe2O3/Al2O3). The results show, that the increase in pressure promotes the conversion of CO and inhibits the conversion of H2. When the two gases are considered together, the increase in pressure promotes the reaction between syngas and Fe2O3 and reduces the demand for Fe2O3 oxygen carrier per unit of syngas Lower Heating Value and so also the inventory of the reactor. Increasing temperatures promotes both the reaction of H2 and CO with Fe2O3. Dealing with CO conversion, this is more affected by pressure changes and temperature changes than H2. This represents important information for Fuel Reactor design, scale up and optimization. Further validation is neded in batch and continuous pressurised plants., This work has been funded by the GTCLC-NEG project that has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No. 101018756., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Methane enrichment of biogas using carbon capture materials

  • Chinea, Leonardo
  • Slopiecka, Katarzyna
  • Bartocci, Pietro
  • Alissa Park, Ah-Hyung
  • Wang, Shuang
  • Jiang, Ding
  • Fantozzi, Francesco
20 figures, 5 tables., An important percentage of biogas is made of CO2, which decreases its heating value. If CO2 is adsorbed two advantages can be achieved: CO2 capture and the increase of biogas heating value. Biomethane is a renewable fuel, which can provide energy autonomy and a reduction of greenhouse gases emissions. CO2 capture from power plants by using solid adsorbents is an effective method for the reduction of CO2 emission and an excellent solution for methane enrichment of biogas. This work evaluates the CO2 removal and methane enrichment of biogas by adsorption of gas molecules to solid surfaces of sorbents in a pilot-scale biogas upgrading system. The materials selected to remove CO2 from gases were three: calcium hydroxide, commercial activated carbon and solid amine adsorbent, loaded on commercial activated carbon. The amine adsorbent used in this work was polyethylenimine (PEI). The adsorbents were characterized by thermal stability through thermogravimetric analyzer (TGA), X-ray diffraction analysis (XRD), specific area, pore size distribution and particle size distribution. The CO2 adsorption capacities of the sorbents were measured using a thermogravimetric analyzer with pure CO2 at atmospheric pressure. The CO2 adsorption capacity test was 0.00653 mol/g for calcium hydroxide, 0.00219 mol/g for commercial activated carbon with 0,1 wt% of amine and 0.00168 mol/g for commercial activated carbon. The effect of adsorbent dosage as a function of time was also investigated. The result showed that the CO2 adsorption of the sorbents increases with adsorbent dosage. The results obtained from the upgrading tests conducted in the lab-scale system showed that a purity of 99.9 % methane was obtained using 15 g of calcium hydroxide, a purity of methane of 87 % was obtained using 30 g of commercial activated carbon with 0.1 wt% amine and a purity around 86 % methane was obtained using 30 g of commercial activated carbon., The authors would like to thank H2CU for the possibility of performing the exchange with the Columbia University. Authors want to acknowledge for funding, the project: “Technical, Environmental and Socio-Economic study of power-to-fuel solutions for a sustainable path towards a green future: achieving 80 % renewable electric energy and 40 % renewable primary energy supply within the next two decades”. Funded in 2020 by PRIN Italian national funds and registered with the code: 2020AA9N4M. This work has been funded by the GTCLC-NEG project that has received funding from the Euro-pean Union’s Horizon 2020 research and innovation programme under the Marie Sklodow-ska-Curie grant agreement No. 101018756., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Ilmenite: A promising oxygen carrier for the scale-up of chemical looping

  • Bartocci, Pietro
  • Abad Secades, Alberto
  • Cabello Flores, Arturo
28 figures, 8 tables., To tackle the scale-up of Chemical Looping Processes, the production of efficient and affordable oxygen carriers appears of paramount importance. Ilmenite is an ore-derived oxygen carrier which can be considered surely abundant and cheap. The preparation and the characterization of its reactivity are presented in the following paper. The paper describes briefly the performance of ilmenite relating it to other oxygen carriers, its thermodynamic properties, the kinetics and its use with fuels (solid, liquid and gaseous, including biofuels). Key features for an oxygen carrier are represented by costs and environmental sustainability, oxygen transport capacity and reactivity, as well as specific issues related to its use in fluidized bed reactors, namely agglomeration and attrition behavior. In addition, information about mutual interaction with fuel, considering also the influence of impurities, coke deposition or its effect on the gasification rate of solid fuels, is reported., This work has been partially funded by the GTCLC-NEG project, that has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No. 101018756, and the SWINELOOP project (PID2019-106441RB-I00 funded by MICIN/AEI/10.13039/501100011033). A. Cabello also thanks the Grant IJC2019-038908-I funded by MCIN/AEI/10.13039/501100011033., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Pressurised Chemical Looping Combustion (PCLC): air reactor design

  • Bartocci, Pietro
  • Bidini, Gianni
  • Abad Secades, Alberto
  • Bischi, Aldo
  • Cabello Flores, Arturo
  • Obras-Loscertales, Margarita de las
  • Zampilli, Mauro
  • Massoli, Sara
  • Garlatti, Silvia
  • Fantozzi, Francesco
6 figures, 2 tables.-- ATI Annual Congress (ATI 2022) 11/09/2022 - 14/09/2022 Bari, Italy., Bioenergy combustion with Carbon Capture and Storage (BECCS) is a key technology to achieve carbon negative emissions power generation. This can be achieved by coupling the biofuels combustion with CO2 capture and storage (CCS). The lowest cost for CCS corresponds at the moment to the Chemical Looping Combustion (CLC) process. This can use biofuels which can be gaseous (biomethane, biogas or syngas etc.), liquid (biodiesel, bioethanol, biobutanol and pyrolysis oils etc.) or solids (wood dust, charcoal dust, wood chips, wood pellets etc.) While plant design with gaseous and liquid biofuels would be simpler, plants using solid biofuels and based on two couple fluidisd beds would need the use of a third reactor named carbon stripper. In the specific case if we plan to couple a CLC plant with a turbo expander (to achieve the high efficiencies of a combined cycle power plant) we have to work with pressurized reactors. However, there are some technical barriers to the coupling of a chemical looping combustor with a turbo expander, such as: the operation of the combustor in pressurised conditions; the inventory balance among reactors; elutriated particles reaching the turbo expander. This explaind why there is no commercial plant at the moment capable to do this. The aim of this paper is to present a model for the dimensioning of an air reactor to be coupled to a turbo expander of the power of about 12 MWe. Based on this, the air mass flow can be obtained and the geometric parameters can be calculated, to have an air velocity which is needed to achieve the fast fluidization regime and to ensure a high conversion rate as well as particles and heat exchage among air and fuel reactor., This work has been funded by the GTCLC-NEG project that has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Sklodow-ska-Curie grant agreement No. 101018756., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Dimensioning air reactor and fuel reactor of a pressurized chemical looping combustor to be coupled to a gas turbine: Part 1, the air reactor

  • Bartocci, Pietro
  • Abad Secades, Alberto
  • Bischi, Aldo
  • Wang,Lu
  • Cabello Flores, Arturo
  • Obras-Loscertales, Margarita de las
  • Zampilli, Mauro
  • Yang, Haiping
  • Fantozzi, Francesco
8 figures, 6 tables., This paper provides a simple methodology for the design of the air reactor of a chemical looping combustor to optimize its characteristics when it is employed connected to a turbo expander to produce power. The design process, given a certain objective (e.g., electric power) defines the reactor specifics, namely height and diameter, taking into account the following aspects: solids inventory of the air reactor; gas velocity; air reactor transport disengaging height (TDH); solids concentration profile along the reactor height, dense bed height; freeboard height; pressure drop depending on air reactor injectors design and configuration. The total air reactor height was about 9.5 m, while the diameter was about 1.8 m. The total inventory was about 10,880 kg; while the circulation rate in the air reactor was about 110 kg/s. The operating pressure and temperature were, respectively, 12 bar and 1200 °C. The average velocity of the gases inside the reactor was about 4 m/s. The fluidization regime resulted to be comprised between turbulent and fast fluidization. Further work must be directed into the estimate of the pressure drop of the reactor, which will affect the plant efficiency in a considerable way., This work has been funded by the GTCLC-NEG project that has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No. 101018756., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Exploring design options for pressurized chemical looping combustion of natural gas

  • Cabello Flores, Arturo
  • Abad Secades, Alberto
  • Obras-Loscertales, Margarita de las
  • Bartocci, Pietro
  • García Labiano, Francisco
  • Diego Poza, Luis F. de
5 figures, 2 tables., Chemical Looping Combustion (CLC) is a low-cost CO2 capture technology highly competitive for industrial and energy applications. Up to date, CLC has been mostly developed at atmospheric pressure. Pressurized CLC may bring additional advantages due to the intensification of the process. The main objective of this work was to determine whether an increase in the operating pressure could improve the fuel conversion in CLC systems of gaseous fuels when ilmenite was used as oxygen carrier. Fluid dynamics considerations were evaluated to determine a window of suitable design parameters at pressurized conditions. A theoretical model previously validated at atmospheric pressure was modified to consider fluid dynamics and reaction kinetics at pressurized conditions, both in the bubbling and turbulent regimes, using ilmenite as oxygen carrier. The conversion of natural gas was estimated as a function of several design and operating parameters, such as the gas velocity, particle size and reacting temperature. Uncompleted combustion of natural gas was predicted at atmospheric conditions, and a limited improvement was estimated at pressurized conditions. A discussion about the required reactivity of the oxygen carrier to achieve complete combustion was performed. Furthermore, an energy analysis of a CLC system operating at atmospheric or pressurized (0.5 MPa) conditions with fuel reactor designed under the bubbling or turbulent regimes was carried out using the Aspen HYSYS process simulation software for two different applications of heat generation: production of domestic hot water and process steam. From this energy balance, it could be concluded that the energy efficiency achieved at pressurized conditions was slightly higher than that obtained at atmospheric pressure, essentially because at pressurized conditions it was possible to use the latent heat of condensation of the water generated in the fuel reactor. In addition to the results obtained in this work, a thorough assessment of technical risks and a techno-economic analysis would be required in order to make a final decision about the feasibility of operating at pressurized conditions in CLC systems., This work was supported by the project I-LINK1225 from the i-Link+ 2017 program (CSIC) and the GTCLC-NEG project that has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No. 101018756. A. Cabello also thanks the Grant IJC2019-038908-I funded by MCIN/AEI/10.13039/501100011033., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Preparation of aromatic hydrocarbons from catalytic pyrolysis of digestate

  • Tan, Haodi
  • Yang, Minjiao
  • Chen, Yingquan
  • Chen, Xu
  • Fantozzi, Francesco
  • Bartocci, Pietro
  • Tschentscher, Roman
  • Bartonini, Federica
  • Yang, Haiping
  • Chen, Hanping
9 figures, 1 table.-- Supplementary information available.-- © 2023. This manuscript version is made available under the CC-BY-NC-ND 4.0 license https://creativecommons.org/licenses/by-nc-nd/4.0/, Catalytic pyrolysis of digestate to produce aromatic hydrocarbons can be combined with anaerobic fermentation to effectively transform and utilize all biomass components, which can achieve the meaningful purpose of transforming waste into high-value products. This study explored whether catalytic pyrolysis of digestate is feasible to prepare aromatic hydrocarbons by analyzing the thermogravimetric characteristics, pyrolysis characteristics, and catalytic pyrolysis characteristics of digestate. For digestate pyrolysis, an increase in temperature was found to elevate the CO, CH4, and monocyclic aromatic hydrocarbon (benzene, toluene, and xylene; BTX) content, whereas it decreased the contents of phenols, acids, aldehydes, and other oxygenates. Furthermore, the catalytic pyrolysis process effectively inhibited the acids, phenols, and furans in the liquid, whereas the yield of BTX increased from 25.45% to 45.99%, and the selectivity of xylene was also increased from 10.32% to 28.72% after adding ZSM-5. ZSM-5 also inhibited the production of nitrogenous compounds., This work was partially funded by the GTCLC-NEG project, which received funding from the European Union’s Horizon 2020 Research and Innovation Programme under the Marie Sklodowska-Curie Grant Agreement (101018756). The authors would like to thank the Brisk 2 European project (731101) for funding this project. The project acronym was B2PB-SIN2-1001, and the project title was “Optimization of catalytic pyrolysis of digestate and sewage sludge.” The authors would also like to acknowledge the COST Action CA17128 “Establishment of a Pan-European Network on the Sustainable Valorisation of Lignin (LignoCOST)” for useful discussions on lignin valorization., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Dimensioning air reactor and fuel reactor of a pressurized CLC plant to be coupled to a gas turbine: part 2, the fuel reactor

  • Lu, Wang
  • Bartocci, Pietro
  • Abad Secades, Alberto
  • Bischi, Aldo
  • Yang, Haiping
  • Cabello Flores, Arturo
  • Obras-Loscertales, Margarita de las
  • Zampilli, Mauro
  • Fantozzi, Francesco
Bioenergy with Carbon Capture and Storage (BECCS) technologies are fundamental to reach negative CO2 emissions by removing it from the atmosphere and storing it underground. A promising solution to implement BECCS is pressurized Chemical Looping Combustion (CLC), which involves coupling a pressurized CLC reactor system to a turboexpander. The typical configuration chosen is to have an air reactor and a fuel reactor based on coupled circulating fluidized beds. The fluidization regime in both reactors is preferred to be fast fluidization to enhance gas particle contact and solids circulation among reactors. To design the two reactors, Aspen Plus software was used, given that the new version has a module for fluidized bed modeling. At first, the oxygen carrier was designed ex novo, but given that it is a composite compound mainly made by nickel oxide freeze-granulated on alumina (Ni40Al-FG), the molecular structure has been inserted in Aspen Plus. Then, based on the power of the gas turbine, the power output per kg of evolving fluid (in this case, depleted air) is calculated using Aspen Plus. Once the nitrogen content in the depleted air is known, the total air at the inlet of the air reactor is calculated. The fuel reactor is modeled by inserting the reduction reactions for nickel-based oxygen carriers. The paper presents a useful methodology for developing pressurized Chemical Looping Combustors to be coupled to gas turbines for power generation. The provided data will be cross-validated with 0D-models and experimental results., This work has been partially funded by the GTCLC-NEG project that has received funding from the European Union’s Horizon 2020 research and innovation program under the Marie Sklodowska-Curie grant agreement No. 101018756., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Technical evaluation of a chemical looping combustor fed with biofuels and its integration with a gas turbine.

  • Bartocci, Pietro
  • Abad Secades, Alberto
  • Cabello Flores, Arturo
  • Obras-Loscertales, Margarita de las
  • Bischi, Aldo
  • Ravelli, Silvia
  • Fantozzi, Francesco
Work presented at the 6th International Conference on Chemical Looping (CLC 2022), 19th-22nd september, in Zaragoza (Spain)., This work has been partially funded by the GTCLC-NEG project that has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No. 101018756, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Design of the air reactor for a Chemical Looping Combustion plant coupled with a turbo expander

  • Bartocci, Pietro
  • Abad Secades, Alberto
  • Cabello Flores, Arturo
  • Obras-Loscertales, Margarita de las
  • Mendiara, Teresa
  • Lu, Wang
  • Yang, Haiping
  • Fantozzi, Francesco
Work presented at the 14th International Conference on Applied Energy - ICAE2022, Aug. 8-11, 2022, Bochum, Germany., Carbon Capture and Storage is a technology of paramount importance for Sustainable Development Goal 7 (Affordable and Clean Energy) and Sustainable Development Goal 13 (Climate Action). The European Union is moving rapidly towards low carbon technologies, see the Energy Union Strategy. Coupling biofuels and carbon capture and storage to decarbonize the power and the industrial sector can be done through the development of BECCS (Bioenergy with Carbon Capture and Storage). However there are some technical barriers to the development of this technology. If a Chemical Looping Combustion (CLC) plant has to be coupled with a gas turbine, it has to work in pressurized conditions. The effect of pressure on chemical reactions and fluidized bed hydrodynamics, at the moment, is not clear. The aim of this paper is to present a model for the dimensioning of an air reactor to be coupled to a gas turbine of the power of about 14 MW. Based on the air mass flow requirements to produce such a power. The fluidized bed is designed choosing geometry parameters and making a sensitivity analysis of the influence of the turbine inlet temperature on final plant efficiency. It can be seen from the analysis presented in this paper that the diameter of the fluidized bed is mainly influenced by the mass flow of the air in the reactor, while the height of the reactor is mainly influenced by elutriation and transport disengaging height calculations., This work has been funded by the GTCLC-NEG project that has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Sklodowska- Curie grant agreement No. 101018756., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Development of a chemical looping combustor fed with natural gas and its integration with a gas turbine in ASPEN Plus

  • Bartocci, Pietro
  • Abad Secades, Alberto
  • Cabello Flores, Arturo
  • Obras-Loscertales, Margarita de las
  • Zampilli, Mauro
  • Taiana, Andrea
  • Serra, Angela
  • Fantozzi, Francesco
11 figures, 4 tables, 8 pages.-- Meeting: ASME Turbomachinery Technical Conference and Exposition (Turbo Expo) on Collaborate, Innovate and Empower - Propulsion and Power for a Sustainable Future Location Boston, MA, USA. JUN 26-30, 2023.-- Volume 2: Ceramics and Ceramic Composites; Coal, Biomass, Hydrogen, and Alternative Fuels.-- GT2023-101652., The lowest cost solution for carbon capture and storage in power plants at the moment is represented by chemical looping combustion. This technology nevertheless has not yet met the market due to scale up needs and also to the fact that to be coupled to a gas turbines a chemical looping combustor has to be operated at high pressure and high temperature. While high pressurization of the reactor can imply problems in the management of the circulation rate and the sealing between the air reactor and the fuel reactor; operation at high temperature can imply agglomeration, sintering and also attrition problems for the oxygen carriers. To analyze those problems a Mari Curie project has been funded under the Horizon2020 EU program. This paper presents the analysis of two configurations of the chemical looping combustor and of the coupled gas turbine. Both configurations are examples of possible bioenergy with carbon capture and storage (BECCS) technologies. The aim is to compare BECCS efficiency with that of combined cycles fed with natural gas and using post-combustion carbon capture and storage, which seem to be the competing technologies. A methodology for the dimensioning of the pressurized chemical looping combustor to be coupled to a gas turbine of the power of about 12 MW mechanical power, is presented and applied also based on the results of experimental campaigns previously performed at the Spanish National Research Council (CSIC), Instituto de Carboquimica of Zaragoza, Spain., This work has been funded by the GTCLC-NEG project that has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No. 101018756., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Bioenergy with Carbon Capture and Storage (BECCS) developed by coupling a Pressurised Chemical Looping combustor with a turbo expander: How to optimize plant efficiency

  • Bartocci, Pietro
  • Abad, Alberto
  • Mattisson, Tobias
  • Cabello, Arturo
  • Loscertales, Margarita de las Obras
  • Negredo, Teresa Mendiara
  • Zampilli, Mauro
  • Taiana, Andrea
  • Serra, Angela
  • Arauzo, Inmaculada
  • Cortes, Cristobal
  • Wang, Liang
  • Skreiberg, Øyvind
  • Yang, Haiping
  • Yang, Qing
  • Lu, Wang
  • Chen, Yingquan
  • Fantozzi, Francesco
Carbon Capture and Storage is a technology of paramount importance for the fulfillment of the Sustainable Development Goal 7 (Affordable and Clean Energy) and the Sustainable Development Goal 5 (Climate Action). The European Union is moving rapidly towards low carbon technologies, for instance via the Energy Union Strategy. Coupling biofuels and carbon capture and storage to decarbonize the power and the industrial sector can be done through the development of BECCS (Bioenergy with Carbon Capture and Storage). Chemical Looping combustion is one of the cheapest way to capture CO2. A Chemical Looping Combustion (CLC) plant can be coupled with a turbo expander to convert energy to power, but it has to work in pressurised conditions. The effect of pressure on the chemical reactions and on fluidised bed hydrodynamics, at the moment, is not completely clear. The aim of this review is to summarize the most important highlights in this field and also provide an original method to optimize power plant efficiency. The main objective of our research is that to design a pressurised Chemical Looping Combustion plant which can be coupled to a turbo expander. To achieve this we need to start from the characteristics of the turbo expander itself (eg. the Turbine Inlet Temperature and the compression ratio) and then design the chemical looping combustor with a top down approach. Once the air and the fuel reactor have been dimensioned and the oxygen carrier inventory and circulation rate have been identified, the paper proposes a final optimization procedure based on two energy balances applied to the two reactors. The results of this work propose an optimization methodology and guidelines to be used for the design of pressurised chemical looping reactors to be coupled with turbo expanders for the production of power with carbon negative emissions.