Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 10
Encontrada(s) 1 página(s)

Digibug. Repositorio Institucional de la Universidad de Granada
Publicación Artículo científico (JournalArticle)

The earliest Baltic amber in Western Europe

  • Murillo Barroso, María de las Mercedes
  • Martín Cólliga, Araceli
  • Martinón Torres, Marcos
This study has been supported by the R&D Project 'Metal y Ámbar II: Circulación de bronce y ámbar en el Sureste peninsular durante la Edad del Bronce' (PID2019-108289GB-I00/AEI/10.13039/501100011033) and the R&D Project ‘Social and Exchange Networks in the Argaric Society’ (PID2022-137494NB-I00/AEI/10.13039/501100011033) funded by the Spanish Ministry of Science and Innovation. The contribution of M.M.T. was supported by funding from the European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation programme (Grant agreement No. 101021480, Project REVERSEACTION). We want to thank D. Pérez L’Huiller for editing Fig. , and M. Vilar Welter for editing Fig. . We are also grateful to J.F. Gibaja Bao, M.E. Subirà and M. Fontanals-Colls, who kindly shared the AMS radiocarbon dates funded by their respective projects. Date CF-X30-C4-134 was obtained in the framework of the R&D Project ‘Aproximación a las primeras comunidades neolíticas del NE peninsular a través de sus prácticas funerarias’ (HAR2011-23149) funded by the Spanish Ministry of Science and Innovation, IP: J. Gibaja and M.E. Subirà. Date CF-S19-C4R-56 was obtained in the framework of the R&D Project ‘NEOMEDIS: Neolithic Mediterranean diet through stable Isotope analysis’, funded in the framework of the Marie Skłodowska-Curie Fellowship (ID: 792130), IP: M. Fontanals., The online version contains supplementary material available at https://doi. org/10.1038/s41598-023-41293-0, The occurrence of Baltic amber through Europe has traditionally been associated to the spread of the Bell Beaker culture during the 3rd millennium BC. In Iberia, this phenomenon is particularly noticeable in the southern half. Here we present an amber bead recovered in a Late Neolithic funerary cave (3634–3363 cal BC) from northeastern Iberia where more than 12 individuals had been buried. Fourier transform infrared spectroscopy results of four samples revealed their complete resemblance with Baltic succinite reference spectra. Despite being a single bead, this finding provides the earliest evidence for the arrival of Baltic amber to the Mediterranean and Western Europe, before the Bell Beaker phenomenon and more than a millennium earlier than traditionally thought. This finding has implications for our understanding of early exchange networks of exotic materials, and their associated social structures., Social and Exchange Networks in the Argaric Society PID2022-137494NB-I00/AEI/10.13039/501100011033, Horizon 2020 Framework Programme 101021480, 792130, HAR2011-23149 H2020, European Research Council ERC, Ministerio de Ciencia e Innovación MICINN
Digibug. Repositorio Institucional de la Universidad de Granada
Publicación Artículo científico (JournalArticle)

Amber Networks in Prehistory: North-Eastern Iberia as a Case Study

  • Murillo Barroso, María de las Mercedes
  • Navero Rosales, Mercedes
  • González Marcén, Paloma
  • Martinón Torres, Marcos
This research was supported by MICIU/AEI/10.13039/501100011033 and by FEDER, EU under the R&D Project PID2022-137494NB-I00. It was also supported by funding from the European Research Council under the European Union’s Horizon 2020 research and innovation programme (Grant agreement no. 101021480, Project REVERSEACTION)., The supplementary material for this article can be found at http://doi.org/10.1017/eaa.2025.12, This study concerns prehistoric amber networks in north-eastern Iberia, emphasizing its distinct exchange dynamics compared to other regions of the Iberian Peninsula. Baltic amber dominated assemblages in this area from the Late Neolithic to the Bronze Age, contrasting with the prevalence of Sicilian amber in southern Iberia, or Cretaceous Iberian amber in the northern region. The findings underscore the region’s connection to southern France, with the Pyrenees serving as a cultural conduit, unlike the river Ebro, which acted as a boundary. Here the authors present the results of a Fourier transform infrared spectrometry (FTIR) analysis of twenty-one amber beads, primarily from collective burials. Eighteen were made of Baltic succinite. Baltic amber may have begun to arrive as early as 3634–3363 cal BC, and continued to be used until the Late Bronze Age. Exceptions included a unique spacer-bead made of gum and two bolus pigments misidentified as amber. The results highlight Iberia’s regional diversity in raw material sourcing and exchange, reflecting distinct sociocultural dynamics and challenging linear narratives of Iberian prehistory., MICIU/AEI/10.13039/501100011033 PID2022-137494NB-I00, FEDER, EU, European Union’s Horizon 2020 101021480
Digibug. Repositorio Institucional de la Universidad de Granada
Publicación Artículo científico (JournalArticle)

The Chalcolithic metallurgical tradition of Northeast Iberia and its later influence: new analyses and a synthesis, La tradición metalúrgica calcolítica del nordeste ibérico y su influencia posterior: nuevos análisis y una síntesis

  • Montes-Landa, Julia
  • Montero-Ruiz, Ignacio
  • Martinón-Torres, Marcos
Our knowledge of Chalcolithic copper smelting practices across Iberia is extensive but lacks regional nuance. This prevents an assessment of regional trajectories that may depart from a general ‘Iberian technological tradition’, including their origins and diachronic evolution. This paper contributes to these questions by analysing 3rd millennium BC copper production residues from various sites in Northeast Iberia: Covas Cartanyà, del Buldó, Josefina d’Escornalbou, de l’Heura, and Balma del Duc. Using pXRF, OM, and SEM-EDS, we characterise the ores used and the metallurgical operations conducted (including smelting of copper carbonates, co-smelting of sulphidic and oxidic ores, and melting), and discuss them in relation to their contexts, contemporaneous materials and available lead isotopes data. We reveal Northeast Iberian metallurgy as a distinct and versatile tradition that selectively adopted elements from Southern Iberia and Southern France traditions, and trace the legacy of these idiosyncratic practices in copper and bronze making over two millennia., Aunque nuestro conocimiento sobre la producción de cobre durante el Calcolítico en la península ibérica es amplio, carece de matices regionales. Esto impide entender las trayectorias regionales que podrían apartarse de una ‘tradición tec nológica ibérica’ generalizada, incluyendo sus orígenes y evolución diacrónica. En este artículo se contribuye a estas cuestiones analizando una serie de residuos de producción de cobre del III milenio a. C. de varios yacimientos del nordeste: Covas Car tanyà, del Buldó, Josefina d’Escornalbou, de l’Heura y Balma del Duc. Utilizando pXRF, MO y MEB-EDS, se han caracterizado los minerales utilizados y las operaciones realizadas (reducción de carbonatos de cobre, co-reducción de minerales de cobre oxídicos y sulfídicos y fusión de metal). Los resultados obtenidos se han contextualizado en relación con sus contextos arque ológicos, materiales contemporáneos y análisis previos de isótopos de plomo. Con todo esto, se defiende que la metalurgia del nordeste ibérico constituye una tradición aparte, caracterizada por su versatilidad, que adoptó selectivamente elementos de las tradiciones del sur peninsular y francés. El artículo concluye presentando cómo las características idiosincráticas calcolíticas influyen en la producción de cobre y bronce en el área a lo largo de más de dos milenios., European Union’s Horizon 2020 research and innovation programme - (No. 101021480), Cambridge Heritage Science Hub (CHERISH) Initiative - (AH/V011685/1)
Repositori Obert UdL
Publicación Artículo científico (JournalArticle)

An early lead-smelting tradition in north-east Iberia: a short-lived innovation of the third millennium BC

  • Montes-Landa, Julia
  • Moya, Andreu
  • Alonso, Natàlia
  • Martinon-Torres, Marcos
The polymetallic origins and non-linear development of metallurgy have only relatively recently attracted more scholarly attention. Within this framework, the identification of three lead-smelting slag nodules in early second-millennium BC contexts at Minferri (Catalonia, Spain) provides what is currently the earliest direct evidence of lead smelting in Iberia. These materials are linked to previous indirect evidence of lead smelting in the area from the early third millennium BC. Despite the persistence of lead smelting across the Pyrenees in southern France, it was abandoned in north-east Iberia after the mid-second millennium BC, highlighting divergent sociotechnological pathways even in areas of close cultural contact., The Cambridge Trust (Vice Chancellor’s Award), the Arts and Humanities Research Council (DTP2113448) and the Cambridge University Fieldwork Fund funded JML’s PhD work, on which this article is based. MMT’s contribution to the write-up was supported by a European Research Council grant under the Horizon 2020 programme (GA101021480, REVERSEACTION). The Oficina de Suport a la Iniciativa Cultural (Generalitat de Catalunya, CLT009_22_00057) funded the radiocarbon dating.
Repositori Obert UdL
Publicación Artículo científico (JournalArticle)

Towards a new history of bronze making: Explaining the selection of tin bronze alloying techniques across prehistoric N.E. Iberia (2100-200BC)

  • Montes-Landa, Julia
  • Pons, Enriqueta
  • Rovira Hortalà, M. Carme
  • Moya, Andreu
  • Alonso, Natàlia
  • Martinon-Torres, Marcos
Copper-tin bronzes can be obtained through different techniques (i.e. natural alloying, co-smelting, cementation, co-melting and recycling). This paper presents a methodology and theoretical framework to contextually explain the logic behind the selection of bronze alloying techniques in different contexts, avoiding deterministic, aprioristic and linear narratives. To do so, we selected Northeast Iberia as a case study and present comparative results of slag and slagged technical ceramics from four sites (Minferri, Vilars, Mas Castellar and Ullastret) dated between 2100-200BC. Materials were analysed using pXRF, OM, SEM-EDS, and ICP-MS to characterise technological choices through time. Patterns of choice are considered in relation to the technical affordances of each alloying technique and contextualised within the relevant environmental and socioeconomic parameters. The results show that bronze-making technique choices were primarily dependent on (1) the (in)stability of raw material procurement networks, and (2) the existent selective pressures on performance characteristics for which each technique offered different trade-offs. Discrete combinations of these two variables can explain instances of different techniques co-existing (e.g. Minferri, Mas Castellar, and Ullastret) and cases of commitment to a single one (e.g. Vilars). This is the first diachronic study of bronze alloying practices investigated through direct analyses of bronze-making residues for a given area. The analytical framework employed and the derived behavioural rules can be applied to other case studies to collectively build a multi-path history of bronze alloying development. This will be fundamental to understand the link between bronze alloying technique selection and social change, to better contextualise metal finds within their production and exchange networks, and to requestion existing models of bronze production organisation and technological diffusion across the world., JML would like to thank the Cambridge Trust and the Arts and Humanities Research Council-Departmental Training partnership (2113448) for jointly funding her PhD, on which this paper is based. She is also grateful to Trinity College (University of Cambridge) for funding the costs associated to travelling to Pontós to collect data. Further funds to support other research trips to collect samples were obtained from the University Fieldwork Fund. The authors are also very grateful to the Historical Metallurgy Society for funding part of the isotopic analyses here presented. MMT's contribution to the write-up of this research was supported by funding from the European Research Council (ERC) under the European Union's Horizon 2020 research and innovation programme (Grant agreement No. 101021480, Project REVERSEACTION). The laboratory analyses at the University of Cambridge were made possible by a grant from UKRI Arts and Humanities Research Council (AHRC) Capability for Collections (CapCo) Fund for the Cambridge Heritage Science Hub (CHERISH) Initiative (AH/V011685/1).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Diverse strategies for copper production in Chalcolithic Iberia

  • La Duc, Elizabeth
  • Montero Ruiz, Ignacio
  • Freestone, Ian C.
  • Fanlo Loras, Javier
  • Jabalquinto Expósito, Isabel María
  • Martín de la Cruz, José C.
  • Pérez Lambán, Fernando
  • Picazo Millán, Jesús V.
  • Martinón Torres, Marcos
Este artículo está sujeto a una licencia CC BY 4.0, Our understanding of early copper metallurgy in the Iberian Peninsula is mostly based on analysis from well-studied regions in the Southeast and Southwest. This paper focuses on two recently recovered Chalcolithic metallurgical assemblages outside these traditional research foci: two slagged crucibles from Lugar Viejo III (Zaragoza) and two large slag cakes from Cueva del Cañaveralejo (Córdoba). Analysis of the compositions and microstructures of the artifacts using optical microscopy and scanning electron microscopy-energy dispersive spectroscopy (SEM-EDS) suggests they are related to primary copper production, namely smelting in crucible-furnaces under relatively oxidizing conditions, as is standard for this period. The slag layers on crucibles from Lugar Viejo indicate the production of copper with minor amounts of arsenic, also typical for this period. Of special note is the use of organic temper in the crucibles from Lugar Viejo, a practice found at the nearby site of Moncín but rare at other sites in Iberia. However, the slags from Cueva del Cañaveralejo are atypical in their large size (approx. 125 g each), fayalitic composition, unusual efficiency as demonstrated by a low copper content, and lack of arsenic; furthermore, the high sulfur content raises the possibility of the use of sulfidic ores. Results from both sites are compared against published data from well-known sites such as Los Millares, Las Pilas, Almizaraque, and Bauma del Serrat del Pont. The new data from Lugar Viejo and Cueva del Cañaveralejo reinforce the interpretation of metallurgy in the Iberian Peninsula as a low-skilled, conservative technology but also indicate the need for more research into regional variations. (See Supplementary Data 1 for a summary in Spanish)., The authors are grateful for the technical and human support provided by SGIker of UPV/EHU and European funding (ERDF and ESF). The write-up of this research was supported by a Cambridge International Scholarship from the Cambridge Trust and by funding from the European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation programme (Grant agreement No. 101021480, Project REVERSEACTION), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

The Chalcolithic metallurgical tradition of Northeast Iberia and its later influence: new analyses and a synthesis, La tradición metalúrgica calcolítica del nordeste ibérico y su influencia posterior: nuevos análisis y una síntesis

  • Montes-Landa, Julia
  • Montero Ruiz, Ignacio
  • Martinón-Torres, Marcos
[EN] Our knowledge of Chalcolithic copper smelting practices across Iberia is extensive but lacks regional nuance. This prevents an assessment of regional trajectories that may depart from a general ‘Iberian technological tradition’, including their origins and diachronic evolution. This paper contributes to these questions by analysing 3rd millennium BC copper production residues from various sites in Northeast Iberia: Covas Cartanyà, del Buldó, Josefina d’Escornalbou, de l’Heura, and Balma del Duc. Using pXRF, OM, and SEM-EDS, we characterise the ores used and the metallurgical operations conducted (including smelting of copper carbonates, co-smelting of sulphidic and oxidic ores, and melting), and discuss them in relation to their contexts, contemporaneous materials and available lead isotopes data. We reveal Northeast Iberian metallurgy as a distinct and versatile tradition that selectively adopted elements from Southern Iberia and Southern France traditions, and trace the legacy of these idiosyncratic practices in copper and bronze making over two millennia., [ES] Aunque nuestro conocimiento sobre la producción de cobre durante el Calcolítico en la península ibérica es amplio, carece de matices regionales. Esto impide entender las trayectorias regionales que podrían apartarse de una ‘tradición tecnológica ibérica’ generalizada, incluyendo sus orígenes y evolución diacrónica. En este artículo se contribuye a estas cuestiones analizando una serie de residuos de producción de cobre del III milenio a. C. de varios yacimientos del nordeste: Covas Cartanyà, del Buldó, Josefina d’Escornalbou, de l’Heura y Balma del Duc. Utilizando pXRF, MO y MEB-EDS, se han caracterizado los minerales utilizados y las operaciones realizadas (reducción de carbonatos de cobre, co-reducción de minerales de cobre oxídicos y sulfídicos y fusión de metal). Los resultados obtenidos se han contextualizado en relación con sus contextos arqueológicos, materiales contemporáneos y análisis previos de isótopos de plomo. Con todo esto, se defiende que la metalurgia del nordeste ibérico constituye una tradición aparte, caracterizada por su versatilidad, que adoptó selectivamente elementos de las tradiciones del sur peninsular y francés. El artículo concluye presentando cómo las características idiosincráticas calcolíticas influyen en la producción de cobre y bronce en el área a lo largo de más de dos milenios., This work was funded by a Cambridge Trust Vice-chancellor’s Award and the Arts and Humanities Research Council-Departmental Training Partnership program (2113448), both granted to JML to fund her PhD titled ‘Understanding the selection and co-existence of tin bronze alloying techniques in Antiquity. An experimental and archaeological approach with Northeast Iberia as case study (2800-200 BC)’. The University of Cambridge also supported the costs related to research visits to collect samples through the University Fieldwork Fund. MMT’s contribution to write-up of this research was supported by funding from the European Research Council (ERC) under a European Union’s Horizon 2020 research and innovation programme (Grant Agreement No. 101021480, Project REVERSEACTION). The laboratory analyses at the University of Cambridge were made possible by a grant from UKRI Arts and Humanities Research Council (AHRC) Capability for Collections (CapCo) Fund for the Cambridge Heritage Science Hub (CHERISH) Initiative (AH/V011685/1)., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Diverse strategies for copper production in Chalcolithic Iberia

  • La Duc, Elizabeth
  • Montero-Ruiz, Ignacio
  • Freestone, Ian C.
  • Fanlo Loras, Javier
  • Jabalquinto Expósito, Isabel María
  • Martín de la Cruz, José C.
  • Pérez-Lambán, Fernando
  • Picazo Millán, Jesús V.
  • Martinón-Torres, Marcos
Our understanding of early copper metallurgy in the Iberian Peninsula is mostly based on analysis from wellstudied regions in the Southeast and Southwest. This paper focuses on two recently recovered Chalcolithic metallurgical assemblages outside these traditional research foci: two slagged crucibles from Lugar Viejo III (Zaragoza) and two large slag cakes from Cueva del Canaveralejo ˜ (Cordoba). ´ Analysis of the compositions and microstructures of the artifacts using optical microscopy and scanning electron microscopy-energy dispersive spectroscopy (SEM-EDS) suggests they are related to primary copper production, namely smelting in cruciblefurnaces under relatively oxidizing conditions, as is standard for this period. The slag layers on crucibles from Lugar Viejo indicate the production of copper with minor amounts of arsenic, also typical for this period. Of special note is the use of organic temper in the crucibles from Lugar Viejo, a practice found at the nearby site of Moncín but rare at other sites in Iberia. However, the slags from Cueva del Canaveralejo ˜ are atypical in their large size (approx. 125 g each), fayalitic composition, unusual efficiency as demonstrated by a low copper content, and lack of arsenic; furthermore, the high sulfur content raises the possibility of the use of sulfidic ores. Results from both sites are compared against published data from well-known sites such as Los Millares, Las Pilas, Almizaraque, and Bauma del Serrat del Pont. The new data from Lugar Viejo and Cueva del Canaveralejo ˜ reinforce the interpretation of metallurgy in the Iberian Peninsula as a low-skilled, conservative technology but also indicate the need for more research into regional variations. (See upplementary Data 1 for a summary in Spanish).
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

An early lead-smelting tradition in north-east Iberia: a short-lived innovation of the third millennium BC

  • Montes-Landa, Julia
  • Moya, Andreu
  • Alonso, Natàlia
  • Martinon-Torres, Marcos
The polymetallic origins and non-linear development of metallurgy have only relatively recently attracted more scholarly attention. Within this framework, the identification of three lead-smelting slag nodules in early second-millennium BC contexts at Minferri (Catalonia, Spain) provides what is currently the earliest direct evidence of lead smelting in Iberia. These materials are linked to previous indirect evidence of lead smelting in the area from the early third millennium BC. Despite the persistence of lead smelting across the Pyrenees in southern France, it was abandoned in north-east Iberia after the mid-second millennium BC, highlighting divergent sociotechnological pathways even in areas of close cultural contact., The Cambridge Trust (Vice Chancellor’s Award), the Arts and Humanities Research Council (DTP2113448) and the Cambridge University Fieldwork Fund funded JML’s PhD work, on which this article is based. MMT’s contribution to the write-up was supported by a European Research Council grant under the Horizon 2020 programme (GA101021480, REVERSEACTION). The Oficina de Suport a la Iniciativa Cultural (Generalitat de Catalunya, CLT009_22_00057) funded the radiocarbon dating.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Towards a new history of bronze making: Explaining the selection of tin bronze alloying techniques across prehistoric N.E. Iberia (2100-200BC)

  • Montes-Landa, Julia
  • Pons, Enriqueta
  • Rovira Hortalà, M. Carme
  • Moya, Andreu
  • Alonso, Natàlia
  • Martinon-Torres, Marcos
Copper-tin bronzes can be obtained through different techniques (i.e. natural alloying, co-smelting, cementation, co-melting and recycling). This paper presents a methodology and theoretical framework to contextually explain the logic behind the selection of bronze alloying techniques in different contexts, avoiding deterministic, aprioristic and linear narratives. To do so, we selected Northeast Iberia as a case study and present comparative results of slag and slagged technical ceramics from four sites (Minferri, Vilars, Mas Castellar and Ullastret) dated between 2100-200BC. Materials were analysed using pXRF, OM, SEM-EDS, and ICP-MS to characterise technological choices through time. Patterns of choice are considered in relation to the technical affordances of each alloying technique and contextualised within the relevant environmental and socioeconomic parameters. The results show that bronze-making technique choices were primarily dependent on (1) the (in)stability of raw material procurement networks, and (2) the existent selective pressures on performance characteristics for which each technique offered different trade-offs. Discrete combinations of these two variables can explain instances of different techniques co-existing (e.g. Minferri, Mas Castellar, and Ullastret) and cases of commitment to a single one (e.g. Vilars). This is the first diachronic study of bronze alloying practices investigated through direct analyses of bronze-making residues for a given area. The analytical framework employed and the derived behavioural rules can be applied to other case studies to collectively build a multi-path history of bronze alloying development. This will be fundamental to understand the link between bronze alloying technique selection and social change, to better contextualise metal finds within their production and exchange networks, and to requestion existing models of bronze production organisation and technological diffusion across the world., JML would like to thank the Cambridge Trust and the Arts and Humanities Research Council-Departmental Training partnership (2113448) for jointly funding her PhD, on which this paper is based. She is also grateful to Trinity College (University of Cambridge) for funding the costs associated to travelling to Pontós to collect data. Further funds to support other research trips to collect samples were obtained from the University Fieldwork Fund. The authors are also very grateful to the Historical Metallurgy Society for funding part of the isotopic analyses here presented. MMT's contribution to the write-up of this research was supported by funding from the European Research Council (ERC) under the European Union's Horizon 2020 research and innovation programme (Grant agreement No. 101021480, Project REVERSEACTION). The laboratory analyses at the University of Cambridge were made possible by a grant from UKRI Arts and Humanities Research Council (AHRC) Capability for Collections (CapCo) Fund for the Cambridge Heritage Science Hub (CHERISH) Initiative (AH/V011685/1).