Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 5
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Toward the end-to-end optimization of particle physics instruments with differentiable programming

  • Dorigo, Tommaso
  • Ramos Martínez, Alberto
  • Martínez Ruiz del Arbol, P.
T. Dorigo et al., The full optimization of the design and operation of instruments whose functioning relies on the interaction of radiation with matter is a super-human task, due to the large dimensionality of the space of possible choices for geometry, detection technology, materials, data-acquisition, and information-extraction techniques, and the interdependence of the related parameters. On the other hand, massive potential gains in performance over standard, “experience-driven” layouts are in principle within our reach if an objective function fully aligned with the final goals of the instrument is maximized through a systematic search of the configuration space. The stochastic nature of the involved quantum processes make the modeling of these systems an intractable problem from a classical statistics point of view, yet the construction of a fully differentiable pipeline and the use of deep learning techniques may allow the simultaneous optimization of all design parameters., In this white paper, we lay down our plans for the design of a modular and versatile modeling tool for the end-to-end optimization of complex instruments for particle physics experiments as well as industrial and medical applications that share the detection of radiation as their basic ingredient. We consider a selected set of use cases to highlight the specific needs of different applications., We gratefully acknowledge support by IRIS-HEP (Institute for Research and Innovation in Software for High Energy Physics, National Science Foundation grant OAC-1836650, https://iris-hep.org/) and JENAA (Joint ECFA-NuPECC-APPEC Activities, http://www.nupecc.org/jenaa/). A. Giammanco’s work was partially supported by the EU Horizon 2020 Research and Innovation Programme under the Marie Sklodowska-Curie Grant Agreement No. 822185 (“INTENSE”) and the Research and Innovation Action for Security Grant Agreement No. 101021812 (“SilentBorder”), and by the Fonds de la Recherche Scientifique - FNRS under Grants No. T.0099.19 and J.0070.21. P. Vischia’s work was supported by the FNRS under the Grant No. 40000963 and by the Ramón Cajal program under the Project No. RYC2021-033305-I. C. Krause’s work is supported by DOE grant DOE-SC0010008. M. Aehle, N. Gauger, and R. Keidel gratefully acknowledge the funding of the research training group SIVERT by the German federal state of Rhineland-Palatinate. The work of T. Dorigo, L. Layer and N. Simpson is supported by a Marie Sklodowska-Curie Innovative Training Network Fellowship of the European Commissions Horizon 2020 Programme under Contract Number 765710 INSIGHTS. L. Heinrich and M. Lamparth are supported by the Excellence Cluster ORIGINS, which is funded by the Deutsche Forschungsgemeinschaft (DFG, German Research Foundation) under Germany’s Excellence Strategy - EXC-2094-390783311. Alberto Ramos acknowledges financial support from the Generalitat Valenciana (genT program CIDEGENT/2019/040) and the Ministerio de Ciencia e Innovacion (PID2020-113644GB-I00). H. Zaraket would like to thank the Erasmus Plus mobility program., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

TOMOPT: differential optimisation for task- and constraint-aware design of particle detectors in the context of muon tomography

  • Strong, Giles C.
  • Lagrange, Maxime
  • Orio-Alonso, Aitor
  • Bordignon, Anna
  • Bury, Florian
  • Dorigo, Tommaso
  • Giammanco, Andrea
  • Heikal, Mariam
  • Kieseler, Jan
  • Lamparth, Max
  • Martínez Ruiz del Arbol, P.
  • Nardi, Federico
  • Vischia, Pietro
  • Zaraket, Haitham
We describe a software package, TomOpt, developed to optimise the geometrical layout and specifications of detectors designed for tomography by scattering of cosmic-ray muons. The software exploits differentiable programming for the modeling of muon interactions with detectors and scanned volumes, the inference of volume properties, and the optimisation cycle performing the loss minimisation. In doing so, we provide the first demonstration of end-to-end-differentiable and inference-aware optimisation of particle physics instruments. We study the performance of the software on a relevant benchmark scenario and discuss its potential applications., This work was partially supported by the EU Horizon 2020 Research and Innovation Programme under Grant Agreement No. 101021812 ('SilentBorder'), and by the Fonds de la Recherche Scientifique—FNRS under Grants Nos. T.0099.19 and J.0070.21. The collaboration of Aitor Orio was co-funded by the Spanish Ministry of Science and Innovation through the program 'Ayudas para contratos para la formación de doctores en empresas (Doctorados Industriales) 2018' (Grant Reference: DIN2018-009886). Pietro Vischia's work was partially supported by the FNRS under Grant No. 40000963 and by the Ramón y Cajal program under the Project No. RYC2021-033305-I. Max Lamparth was supported by the Deutsche Forschungsgemeinschaft (DFG, German Research Foundation) under Germany's Excellence Strategy—EXC-2094–390783311. Jan Kieseler wassupported by the Alexander-von-Humboldt-Stiftung., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Progress in end-to-end optimization of fundamental physics experimental apparata with differentiable programming

  • Aehle, Max
  • Barreiro, R. Belén
  • Ruiz de Austri, Roberto
  • Vischia, Pietro
M. Aehle et al., In this article we examine recent developments in the research area concerning the creation of end-to-end models for the complete optimization of measuring instruments. The models we consider rely on differentiable programming methods and on the specification of a software pipeline including all factors impacting performance — from the data-generating processes to their reconstruction and the inference on the parameters of interest — along with the careful specification of a utility function well aligned with the end goals of the experiment., Building on previous studies originated within the MODE Collaboration, we focus specifically on applications involving instruments for particle physics experimentation, as well as industrial and medical applications that share the detection of radiation as their data-generating mechanism., This report illustrates the most recent advancements in the area, and outlines, for each of the discussed applications as well as for automatic differentiation itself, ongoing and future work., This work was supported by the U.S. Department of Energy, under DOE Contract No. DE-AC02-76SF00515, Office of Science, Office of Basic Energy Sciences. This work was partially supported by the EU Horizon 2020 Research and Innovation Programme under grant agreement No. 101021812 (“SilentBorder”). Some of the research leading to these results has received funding from the Basic Research Program at the National Research University Higher School of Economics. Max Aehle gratefully acknowledges funding from the research training group SIVERT by the German federal state of Rhineland-Palatinate. Jennet Dickinson (also supported by the DOE Early Career Research Program) and Lindsey Grey are supported by Fermi Research Alliance, LLC under Contract No. DE-AC02-07CH11359 with the Department of Energy (DOE), Office of Science, Office of High Energy Physics. Borja S. González is grateful for the financial support by the FCT PhD grant PRT/BD/151553/2021 under the IDPASC program. Fredrik Sandin’s work was supported by the Jubilee and Kempe Foundations, project No. JCSMK JF-2303. Pietro Vischia’s work was supported by the “Ramón y Cajal” program under Project No. RYC2021-033305-I funded by MCIN/AEI/10.13039/501100011033 and by the European Union NextGenerationEU/PRTR ., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Reseña (Review)

Progress in end-to-end optimization of fundamental physics experimental apparata with differentiable programming

  • Aehle, Max
  • Arsini, Lorenzo
  • Barreiro, R. Belén
  • Belias, Anastasios
  • Boldyrev, Alexey
  • Bury, Florian
  • Cebrian, Susana
  • Demin, Alexander
  • Dickinson, Jennet
  • Donini, Julien
  • Dorigo, Tommaso
  • Doro, Michele
  • Gauger, Nicolas R.
  • Giammanco, Andrea
  • Gray, Lindsey
  • González, Borja S.
  • Kain, Verena
  • Kieseler, Jan
  • Kusch, Lisa
  • Liwicki, Marcus
  • Maier, Gernot
  • Nardi, Federico
  • Ratnikov, Fedor
  • Roussel, Ryan
  • Austri, Roberto Ruiz de
  • Sandin, Fredrik
  • Schenk, Michael
  • Scarpa, Bruno
  • Silva, Pedro
  • Strong, Giles C.
  • Vischia, Pietro
In this article we examine recent developments in the research area concerning the creation of end-to-end models for the complete optimization of measuring instruments. The models we consider rely on differentiable programming methods and on the specification of a software pipeline including all factors impacting performance — from the data-generating processes to their reconstruction and the inference on the parameters of interest — along with the careful specification of a utility function well aligned with the end goals of the experiment. Building on previous studies originated within the MODE Collaboration, we focus specifically on applications involving instruments for particle physics experimentation, as well as industrial and medical applications that share the detection of radiation as their data-generating mechanism. This report illustrates the most recent advancements in the area, and outlines, for each of the discussed applications as well as for automatic differentiation itself, ongoing and future work.
RUO. Repositorio Institucional de la Universidad de Oviedo
Publicación Artículo científico (JournalArticle)

Optimization of a cosmic muon tomography scanner for cargo border control inspection

  • Zaher, Z.
  • Lay, H.
  • Dorigo, T.
  • Giammanco, A.
  • Gulik, V.
  • Hrytsiuk, C.
  • Kudryavtsev, V. A.
  • Lagrange, M.
  • Metspalu, T.
  • Strong, G. C.
  • Türkoglu, C.
  • Vischia, Pietro|||0000-0002-7088-8557
The past several decades have seen significant advancement in applications using cosmic-ray muons for tomography scanning of unknown objects. One of the most promising developments is the application of this technique in border security for the inspection of cargo inside trucks and sea containers in order to search for hazardous and illicit hidden materials. This work focuses on the optimization studies for a muon tomography system similar to that being developed within the framework of the “SilentBorder” project funded by the EU Horizon 2020 scheme. Current studies are directed toward optimizing the detector module design, following two complementary approaches. The first leverages TomOpt, a Python-based end-to-end software that employs differentiable programming to optimize scattering tomography detector configurations. While TomOpt inherently supports gradient-based optimization, a Bayesian Optimization module is introduced to better handle scenarios with noisy objective functions, particularly in image reconstruction-driven optimization tasks. The second optimization strategy relies on detailed GEANT4-based simulations, which, while more computationally intensive, offer higher physical fidelity. These simulations are also employed to study the impact of incorporating secondary particle information alongside cosmic muons for improved material discrimination. This paper highlights the outcomes and key findings from these optimization studies., The authors acknowledge funding from the EU Horizon 2020 Research and Innovation Programme under Grant Agreement No. 101021812 (“SilentBorder”) and by the Fonds de la Recherche Scientifique—FNRS under Grant Nos. T.0099.19 and J.0070.21. Pietro Vischia’s w