Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 7
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Experimental characterization of an ultra-broadband dual-mode symmetric Y-junction based on metamaterial waveguides

  • Fernández de Cabo, Raquel
  • Vilas, Jaime
  • Cheben, Pavel
  • Velasco, Aitor V.
  • González-Andrade, D.
7 pags., 9 figs., 1 tab., Silicon photonic integrated circuits routinely require 3-dB optical power dividers with minimal losses, small footprints, ultra-wide bandwidths, and relaxed manufacturing tolerances to distribute light across the chip and as a key building block to form more complex devices. Symmetric Y-junctions stand out among other power splitting devices owing to their wavelength-independent response and a straightforward design. Yet, the limited resolution of current fabrication methods results in a minimum feature size (MFS) at the tip between the two Y-junction arms that leads to significant losses for the fundamental mode. Here we propose to circumvent this limitation by leveraging subwavelength metamaterials in a new type of ultra-broadband and fabrication-tolerant Y-junction. An exhaustive experimental study over a 260 nm bandwidth (1420-1680 nm) shows excess loss below 0.3 dB for the fundamental transverse-electric mode (TE0) for a high-resolution lithographic process (MFS about 50 nm) and less than 0.5 dB for a fabrication resolution of 100 nm. Subwavelength Y-junctions with deterministically induced errors of plus-minus 10 nm further demonstrated robust fabrication tolerances. Moreover, the splitter exhibits excess loss lower than 1 dB for the first-order transverse-electric mode (TE1) within a 100 nm bandwidth (1475-1575 nm), using high-resolution lithography., This work has been funded by the Spanish Ministry of Science and Innovation (RTI2018-097957-B-C33, RED2018-102768-T, PID2020-115353RA-I00); the Spanish State Research Agency by ESF Investing in your future under grant PRE2021-096954 and European Union – NextGenerationEU, through the Recovery, Transformation and Resilience Plan (DIN2020-011488); the Community of Madrid – FEDER funds (S2018/NMT-4326); the European Union’s Horizon Europe research and innovation program under Marie Sklodowska-Curie grant No.101062518, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Broadband three-mode converter and multiplexer based on cascaded symmetric Y-junctions and subwavelength engineered MMI and phase shifters

  • González-Andrade, Andrés
  • Olivares, Irene
  • Fernández de Cabo, Raquel
  • Vilas, Jaime
  • Días-Ponte, Antonio
  • Velasco, Aitor V.
8 pags., 7 figs., 4 tabs., Mode-division multiplexing has emerged as a promising route for increasing transmission capacity while maintaining the same level of on-chip integration. Despite the large number of on-chip mode converters and multiplexers reported for the silicon-on-insulator platform, scaling the number of multiplexed modes is still a critical challenge. In this paper, we present a novel three-mode architecture based on multimode interference couplers, passive phase shifters and cascaded symmetric Y-junctions. This architecture can readily operate up to the third-order mode by including a single switchable phase shifter. Moreover, we exploit subwavelength grating metamaterials to overcome bandwidth limitations of multimode interference couplers and phase shifters, resulting in a simulated bandwidth of 161 nm with insertion loss and crosstalk below 1.18 dB and -20 dB, respectively., This work has been funded in part by the Spanish Ministry of Science and Innovation (MICINN) under grants RTI2018-097957-B-C33, PID2020-115353RA-I00; the Spanish State Research Agency (MCIN/AEI/10.13039/501100011033); the Community of Madrid – FEDER funds (S2018/NMT-4326); the European Union – NextGenerationEU through the Recovery, Transformation and Resilience Plan (DIN2020- 011488, PTQ2021-011974); and the European Union’s Horizon Europe research and innovation program under the Marie Sklodowska-Curie grant agreement N◦ 101062518., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Silicon photonic mode multiplexers based on subwavelength metamaterials and on-chip beam forming

  • González-Andrade, D.
  • Fernández de Cabo, Raquel
  • Vilas, J.
  • Dinh, T. T.D.
  • Luque-González, J. M.
  • Oser, D.
  • Aubin, G.
  • Amar, F.
  • Pérez-Galacho, D.
  • Olivares, I.
  • Dias, A.
  • Halir, R.
  • Ortega-Moñux, A.
  • Wangüemert-Pérez, J. G.
  • Molina-Fernández
  • Cassan, E.
  • Marris-Morini, D.
  • Cheben, P.
  • Vivien, L.
  • Velasco, Aitor V.
  • Alonso-Ramos, C.
4 pags., 1 fig. -- Event: SPIE OPTO, 2023, San Francisco, California, United States, Integration of photonic circuits on silicon offers a unique opportunity to address the scaling of inter- and intra-chip communications in an energy-efficient and cost-effective manner. Mode-division multiplexing (MDM) is deemed as one of the most promising technologies to increase aggregated data bandwidth and avoid a communication capacity crunch. In this invited talk, we review our latest advances on integrated silicon mode multiplexers, including new topologies based on subwavelength grating (SWG) metamaterials for extended broadband operation and higher-order mode support. Specifically, we report on an ultra-broadband multiplexer based on a phase shifter and a multimode interference (MMI) coupler both engineered with subwavelength metamaterials. Experimental measurements of a complete multiplexer-demultiplexer link show losses lower than 2 dB and crosstalk below -17 dB over a bandwidth of 245 nm (1427 – 1672 nm)., This work has been funded in part by the French Industry Ministry (Nano2022 project under IPCEI program); the Agence Nationale de la Recherche (ANR-MIRSPEC-17- CE09-0041); the European Union’s Horizon Europe (Marie SklodowskaCurie grant agreement Nº 101062518); the Spanish Ministry of Science and Innovation (MICINN) under grants RTI2018-097957-B-C33 and PID2020-115353RA-I00; the Spanish State Research Agency under grant MCIN/AEI/10.13039/501100011033 (PTQ2021-011974); the Community of Madrid – FEDER funds (S2018/NMT4326); the European Union – NextGenerationEU through the Recovery, Transformation and Resilience Plan (DIN2020-011488). The fabrication of the device was performed at the Plateforme de Micro-NanoTechnologie/C2N, which is partially funded by the Conseil General de l’Essonne. This work was partly supported by the French RENATECH network., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Broadband mode exchanger based on subwavelength Y-junctions

  • Fernández de Cabo, Raquel
  • Sánchez-Sánchez, Alejandro
  • Yang, Yijun
  • Melati, Daniele
  • Alonso-Ramos, Carlos
  • Velasco, Aitor V.
  • González-Andrade, David
9 pags., 4 figs., 2 tabs., This work has been funded by the Spanish Ministry of Science and Innovation (PID2020-115353RAI00); the Spanish State Research Agency and the European Social Fund Plus under grant PRE2021-096954; the European Union’s Horizon Europe (Marie Sklodowska-Curie grant agreement No. 101062518 and HADEA grant agreement No. 101135523). This work was done within the C2N micro nanotechnologies platforms and partly supported by the RENATECH network and the General Council of Essonne, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Advanced metamaterial waveguide devices for broadband modal and power control

  • Velasco, Aitor V.
  • Fernández de Cabo, Raquel
  • González-Andrade, David
  • Melati, Daniele
  • Alonso-Ramos, Carlos
  • Sánchez-Sánchez, Alejandro
  • Cheben, Pavel
2024 IEEE Photonics Conference (IPC), 10-14 Nov. Rome, Italy, 2024, Subwavelength metamaterials with tailored optical properties are becoming fundamental building blocks for the next generation of photonic integrated circuits. In this work, we present an overview of recent breakthroughs in this field, targeting applications in broadband modal and power management for the silicon on insulator platform., This work has been funded by the Spanish Ministry of Science and Innovation (PID2020-115353RA-I00); the Spanish State Research Agency and the European Social Fund Plus under grant PRE2021-096954, and the the European Union’s Horizon Europe research and innovation program under HADEA grant no. 101135523 and Marie Sklodowska-Curie grant No. 101062518. This work was done in part within the C2N micro nanotechnologies platforms and partly supported by the RENATECH network and the General Council of Essonne, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Subwavelength nanotechnology for broadband modal and power management in silicon photonics

  • Velasco, Aitor V.
  • de Cabo, Raquel Fernández
  • González-Andrade, David
  • Olivares, Irene
  • Stolic, Irena
  • Yang, Yijun
  • Melati, Daniele
  • Alonso-Ramos, Carlos
  • Nuño, Paula
  • Prosopio-Galarza, Roy Ronald
  • Sánchez-Sánchez, Alejandro
  • Cheben, Pavel
Advanced subwavelength metamaterials are emerging as key components for the next generation of photonic integrated circuits. In this work, we review our recent highlights in this field, focusing on high-performance building blocks for modal and power control targeting the silicon on insulator platform., This work has been funded by the Spanish Ministry of Science and Innovation (PID2020-115353RA-I00); the Spanish State Research Agency and the European Social Fund Plus under grant PRE2021-096954, and the European Union’s Horizon Europe research and innovation program under Grant Agreement No. 101135523 (SYMPHONY) and Marie Sklodowska-Curie grant No. 101062518. Views and opinions expressed are however those of the authors only and do not necessarily reflect those of the European Union. The European Union cannot be held responsible for them. This work was done in part within the C2N micro nanotechnologies platforms and partly supported by the RENATECH network and the General Council of Essonne., Peer reviewed, 2 pages .-- Optoelectronic Devices and Integration XIV; 1371503 (2025) ; SPIE/COS Photonics Asia, 2025, Beijing, China
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Broadband Mode Converter With Customizable Modal Ratio Leveraging Subwavelength Engineering for Advanced Multimode Silicon Photonics

  • Fernández de Cabo, Raquel
  • Sánchez-Sánchez, Alejandro
  • Nuño Ruano, Paula
  • Prosopio Galarza, Roy Ronald
  • Melati, Daniele
  • Alonso-Ramos, Carlos
  • Velasco, Aitor V.
  • González-Andrade, David
13 pages, 7 figures, 2 tables, Mode conversion is a critical process in multimode silicon photonics, enabling power exchange between fundamental and higher-order modes. This operation supports a broad spectrum of applications, from high-capacity data transmission to optical signal processing and sensing. Despite recent progress, no reported solution offers customizable modal conversion ratios. This work presents, for the first time, a mode converter that provides control of the conversion ratio between the fundamental and second-order transverse-electric modes. The device consists of two back-to-back Y-junctions interconnected by subwavelength gratings, with a central region incorporating graded-index metamaterials. By adjusting the number of graded-index segments, the device offers multiple conversion ratios across the 1350‒1700 nm broad wavelength range. Experimental measurements validate 15 discrete conversion levels, each exhibiting a consistent conversion factor of 7.7 ± 0.4% per added graded-index segment. The device enables customizable conversion ratios from a maximum between 94% and 98.9% to a minimum between 0.4% and 1.2%, maintained over the 1500‒1600 nm bandwidth. With a compact size of 9.3 × 2.6 µm, the proposed device is well-suited for applications in quantum photonics and programmable photonics. Moreover, we demonstrate the scalability of the design methodology through a compact TE<inf>0</inf>–TE<inf>4</inf> converter that achieves 14 design-defined conversion levels with broadband response., This work has been funded by the Spanish Ministry of Science, Innovationand Universities (PID2024-160056OB-C21); Grant No. JDC2024-053719-I, funded by MICIU/AEI/10.13039/501100011033 and by the ESF+; theEuropean Union’s Horizon Europe (Marie Sklodowska-Curie Grantagreement No. 101062518 and HADEA Grant agreement No. 101135523).We acknowledge funding through project PID2022-139540OB-I00 funded by MCIN/AEI/10.13039/501100011033. A.S.S. acknowledges an FPI scholarship with reference PRE2022-000085. This publication is part of theGrant RYC2023-045670-I funded by MICIU/AEI/10.13039/501100011033and by ESF+. This work was done within the C2N micro nanotechnolo-gies platforms and partly supported by the RENATECH network and the General Council of Essonne. Views and opinions expressed are howeverthose of the authors only and do not necessarily reflect those of the European Union. Neither the European Union nor the granting authoritycan be held responsible for them. This study was supported with fundingfrom European Union NextGenerationEU (PRTR-C17.I1) and by Generalitat de Catalunya. This work was partially funded by CEX2024-001490-S[MICIU/AEI/10.13039/501100011033], Fundació Cellex, Fundació Mir-Puig, and Generalitat de Catalunya through CERCA, Peer reviewed