Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 5
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Purification of Li2CO3 Obtained through Pyrometallurgical Treatment of NMC Black Mass from Electric Vehicle Batteries

  • Rosso, Laura
  • Alcaraz, Lorena
  • Rodríguez-Largo, Olga
  • López Gómez, Félix Antonio
The recycling of lithium batteries is essential for a sustainable energy transition. However, impurities in the products obtained from the black mass can lower their market value. In this work, lithium carbonate, which has the highest market share among lithium-based products, is purified using distilled water at controlled temperature, time and stirring speed. The purification process involves dissolving lithium carbonate in distilled water at low temperatures (between 0 and 10 °C), followed by crystallization through water evaporation. Optimal conditions yielded lithium carbonate with a purity of 99.66 % after two stages of purification. The dependence of the variables on the final purity was deeply analyzed and the thermodynamics of the reaction was studied, confirming the exothermic nature of the dissolution reaction., This work was supported by European Union Horizon Europe programme, under the Grant n°101069890 (FREE4LIB project). The authors express their gratitude for the collaboration of Gonzalo Guerrero Gimena and Cecilia Mateos Jiménez from USTA (Unit of Analytical, Instrumental, and Microbiological Techniques Service) of ICTAN-CSIC in the determination of lithium, fluorine, and phosphorus. We are grateful to Jose Antonio Gracia for his assistance in preparing samples for chemical analysis., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Second life of recycled graphite for sustainable production of multilayer graphene related materials with multiple potential applications

  • Alcaraz, Lorena
  • Díaz-Guerra, Carlos
  • Fernández-Martínez, Rodolfo
  • Gómez-Mancebo, M. Belén
  • Sotillo, Belén
  • Llorente, Irene
  • López Gómez, Félix Antonio
A sustainable route to obtain graphene oxide (GO) and reduced graphene oxide (rGO) with highly competitive properties through the utilization of graphite recycled from spent vehicle's lithium-ion batteries is described. As compared with previous works, our precursor material is representative of a larger-scale recycling procedure, involves the processing of both cathodic and anodic materials, and concerns a larger number of batteries operated in diverse conditions. The morphology, chemical features, structure, and conductivity of the samples have been thoroughly investigated. Results obtained from complementary characterization techniques reveal the correct formation of GO and rGO samples from the recycled graphites. Electrical measurements show that the conductivity of our GO and rGO samples are very similar or even larger than those reported for samples obtained from high-purity natural graphite. These results indicate that our strategy is able to produce good-quality GOs and rGOs with potential applications in different fields, contributing to the circular economy and the recyclability of discarded wastes., This work was carried out as part of the activities of the CSIC Interdisciplinary Thematic Platform PTI Mobility 2030. The authors gratefully acknowledge the financial support of the European Union, Horizon Europe Programme (HORIZON) through project FREE4LIB Ref. 101069890 . This work has been partially supported by Banco Santander-UCM through project PR87/19-22613 and by Comunidad de Madrid through Project PR65/19-22464 (Proyectos de I + D para jóvenes doctores).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Revalorisation of aluminium scrap from electric car battery packs by production of raw powder for additive manufacturing

  • García Diego, Ignacio
  • Perez, David
  • Rodríguez-Largo, Olga
  • López Gómez, Félix Antonio
This study investigates the recycling and reutilisation of aluminium components recovered from electric vehicle battery housings to produce high-quality powder for Selective Laser Melting (SLM) additive manufacturing. The approach involves the disassembly of the battery to extract its metallic parts, followed by comprehensive chemical characterisation, melting, and high-pressure gas atomisation to generate a spherical AlSi7 powder tailored for SLM. A series of processing conditions, including varied energy densities and scanning speeds, were explored to minimise porosity in the printed parts. Subsequent metallographic analyses and mechanical testing revealed that, despite a relatively high iron content inherent in the recycled material, the optimised SLM parameters yielded nearly fully dense components. The microstructural evaluation demonstrated the formation of a refined α-Al matrix accompanied by a continuous silicon network. The mechanical properties of the manufactured parts were found to be comparable to those of conventional AlSi10Mg alloys. These findings confirm the technical feasibility of converting end-of-life electric vehicle battery cases into a valuable feedstock for advanced additive manufacturing. This work supports sustainable engineering practices and offers promising prospects for the effective reuse of recycled aluminium in high-performance applications., This work was carried out as part of the activities of the CSIC Interdisciplinary Thematic Platforms PTI Mobility 2030 and FAB3D. We are grateful to ACCUREC-Recycling GmbH (Krefeld, Germany) for dismantling the batteries and providing pictures of the process. This work was supported by European Union Horizon Europe programme, under the Grant n°101069890 (FREE4LIB project).
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

The role of electrochemistry in the direct recycling of lithium-ion batteries

  • Bermejo Fradejas, María Reyes
  • Castro, Juan
  • Merlo, Maximiliano Adrian
  • Jacas Biendicho, Jordi|||0000-0001-5981-6168
The increasing demand for lithium-ion batteries, driven by their widespread use in electronic devices and electric vehicles, has raised concerns regarding their recycling and end-of-life management. Batteries contain valuable and potentially hazardous materials, necessitating efficient recovery strategies. In this context, direct recycling has emerged as a promising approach, enabling the regeneration of cathode active materials (CAMs) for reuse in new batteries, with reduced energy consumption and minimal environmental impact. Among recycling strategies, electrochemical methods stand out for their efficiency in recovering critical materials via electrodeposition or ion insertion, generating minimal waste and reducing reagent consumption. In this work, the CAM from NMC-type lithium-ion batteries (Li1Ni0.6Mn0.2Co0.2O2, NMC622) was re-lithiated using chronopotentiometry as the electrochemical technique. The re-lithiation process was systematically optimized by evaluating the effects of lithium salt concentration, applied current density, temperature, and stirring conditions. After lithium insertion, the material underwent a heat treatment at 600 °C to restore its original crystalline structure. X-ray diffraction (XRD) analysis confirmed that the regenerated CAM recovered the characteristic layered structure of commercial NMC622, with matching peak positions. Analysis of the I003/I104 intensity ratio revealed an increase in Li–Ni cation mixing compared with the pristine reference, indicating that while the global layered structure was restored, some degree of internal disorder remained. These results highlight the potential of electrochemical re-lithiation as a sustainable strategy for the recovery and regeneration of degraded lithium-ion cathodes, contributing to circular economy approaches in battery materials management., This work is part of the EU-funded FREE4LIB project that has received funding from the European Union's Horizon Europe research and innovation programme under Grant Agreement No 101069890.
Docta Complutense
Publicación Artículo científico (JournalArticle)

Second life of recycled graphite for sustainable production of multilayer graphene related materials with multiple potential applications

  • Alcaraz, Lorena
  • Díaz-Guerra Viejo, Carlos
  • Fernández Martínez, Rodolfo
  • Gómez Mancebo, M. Belén
  • Sotillo Buzarra, Belén
  • Llorente, Irene
  • López, Félix A.
A sustainable route to obtain graphene oxide (GO) and reduced graphene oxide (rGO) with highly competitive properties through the utilization of graphite recycled from spent vehicle's lithium-ion batteries is described. As compared with previous works, our precursor material is representative of a larger-scale recycling procedure, involves the processing of both cathodic and anodic materials, and concerns a larger number of batteries operated in diverse conditions. The morphology, chemical features, structure, and conductivity of the samples have been thoroughly investigated. Results obtained from complementary characterization techniques reveal the correct formation of GO and rGO samples from the recycled graphites. Electrical measurements show that the conductivity of our GO and rGO samples are very similar or even larger than those reported for samples obtained from high-purity natural graphite. These results indicate that our strategy is able to produce good-quality GOs and rGOs with potential applications in different fields, contributing to the circular economy and the recyclability of discarded wastes.