Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 4
Encontrada(s) 1 página(s)

Repositori Obert UdL
Publicación Contribución de congreso (ConferenceOutput)

Hybrid Inorganic-Organic Metal Halide Phase Change Materials for Thermal Energy Storage

  • Carrasco, Gerardo
  • Prats, Alba
  • Pérez-Junyent, Clàudia
  • Tamarit, Josep-Lluis
  • Barrio, María
  • Lloveras, Pol
  • Matheu, Roc
Thermal energy storage at medium temperatures is of increasing interest due to the environmental urgency of increasing efficiency and sustainability of low-grade industrial processes. Solid phase change materials operating at these medium temperatures are scarce but could offer advantages over molten phases. Here, a series of newly synthesized hybrid inorganic organic metal halides is presented, containing extended alkylammonium chains with an increased number of carbon atoms compared to the state of the art. This strategy leads to materials that can operate in temperature ranges beyond 100 ˚C and with enhanced latent heat. High latent heats, pressure sensitivities, transition temperatures and entropies are reported for the studied material families. Our results indicate that our compounds can be exploited as phase change materials for applications at medium temperatures, and suggests that similar strategies could be used in similar material families., This work has been funded by the EIC Pathfinder Challenge 2022 of the Horizon Europe Program under grant agreement 101114987, financed by the European Union. R.M. acknowledges support from Agencia Estatal de Investigación (RYC2021-031578-I, PID2022-137777NA-I00, CEX2021-001202-M). J.-L.T. is grateful to the ICREA Academia program and Agencia Estatal de Investigación (PID2023-146623NB-I00, CEX2023-001300-M).
Repositori Obert UdL
Publicación Contribución de congreso (ConferenceOutput)

Two-dimensional long alkylammonium perovskites as medium-temperature energy materials

  • Prats, Alba
  • Ribas-Cabello, Laura
  • Pérez-Junyent, Clàudia
  • Carrasco, Gerardo
  • Tamarit, Josep Lluís
  • Barrio, María
  • Lloveras, Pol
  • Matheu, Roc
We show that (CnH2n+1NH3)2CuX4 (X = Cl, Br; n = 18–22, even) perovskites display phase transitions between 90 and 110 °C, which are 20–30 °C higher than related compounds. Bromide and chloride variants also present notable differences in structure and thermodynamics. Structural analyses via single-crystal X-ray diffraction reveal that the conformations of carbon atoms near the ammonia group and the tilting angles of the organic cations vary depending on the halide, leading to denser packing in bromide-based perovskites. The bromides undergo a primary phase transition with high latent heat, while chlorides show multiple less energetic transitions. The transitions occur in the 90–110 °C range, with low hysteresis (0.1–1 °C) and high transition pressure sensitivity (dT/dp ≈ 300 °C/GPa), making them advantageous for medium-temperature barocaloric and thermal energy storage applications. Portions of this work have recently been published in Mater. Chem. Front., 2025,9, 3572-3582., This work has been funded by the EIC Pathfinder Challenge 2022 of the Horizon Europe Program under grant agreement 101114987, financed by the European Union. The authors are grateful for access to the ALBA Synchrotron at XALOC beamline for beamtime under proposal 2024018033. R.M. acknowledges support from Agencia Estatal de Investigación (RYC2021-031578-I, PID2022-137777NA-I00, CEX2021-001202-M). J.-L.T. is grateful to the ICREA Academia program and Agencia Estatal de Investigación (PID2023-146623NB-I00, CEX2023-001300-M).
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Two-dimensional long alkylammonium perovskites as medium-temperature energy materials

  • Prats, Alba
  • Ribas-Cabello, Laura
  • Pérez-Junyent, Clàudia
  • Carrasco, Gerardo
  • Tamarit, Josep Lluís
  • Barrio, María
  • Lloveras, Pol
  • Matheu, Roc
We show that (CnH2n+1NH3)2CuX4 (X = Cl, Br; n = 18–22, even) perovskites display phase transitions between 90 and 110 °C, which are 20–30 °C higher than related compounds. Bromide and chloride variants also present notable differences in structure and thermodynamics. Structural analyses via single-crystal X-ray diffraction reveal that the conformations of carbon atoms near the ammonia group and the tilting angles of the organic cations vary depending on the halide, leading to denser packing in bromide-based perovskites. The bromides undergo a primary phase transition with high latent heat, while chlorides show multiple less energetic transitions. The transitions occur in the 90–110 °C range, with low hysteresis (0.1–1 °C) and high transition pressure sensitivity (dT/dp ≈ 300 °C/GPa), making them advantageous for medium-temperature barocaloric and thermal energy storage applications. Portions of this work have recently been published in Mater. Chem. Front., 2025,9, 3572-3582., This work has been funded by the EIC Pathfinder Challenge 2022 of the Horizon Europe Program under grant agreement 101114987, financed by the European Union. The authors are grateful for access to the ALBA Synchrotron at XALOC beamline for beamtime under proposal 2024018033. R.M. acknowledges support from Agencia Estatal de Investigación (RYC2021-031578-I, PID2022-137777NA-I00, CEX2021-001202-M). J.-L.T. is grateful to the ICREA Academia program and Agencia Estatal de Investigación (PID2023-146623NB-I00, CEX2023-001300-M).
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Hybrid Inorganic-Organic Metal Halide Phase Change Materials for Thermal Energy Storage

  • Carrasco, Gerardo
  • Prats, Alba
  • Pérez-Junyent, Clàudia
  • Tamarit, Josep-Lluis
  • Barrio, María
  • Lloveras, Pol
  • Matheu, Roc
Thermal energy storage at medium temperatures is of increasing interest due to the environmental urgency of increasing efficiency and sustainability of low-grade industrial processes. Solid phase change materials operating at these medium temperatures are scarce but could offer advantages over molten phases. Here, a series of newly synthesized hybrid inorganic organic metal halides is presented, containing extended alkylammonium chains with an increased number of carbon atoms compared to the state of the art. This strategy leads to materials that can operate in temperature ranges beyond 100 ˚C and with enhanced latent heat. High latent heats, pressure sensitivities, transition temperatures and entropies are reported for the studied material families. Our results indicate that our compounds can be exploited as phase change materials for applications at medium temperatures, and suggests that similar strategies could be used in similar material families., This work has been funded by the EIC Pathfinder Challenge 2022 of the Horizon Europe Program under grant agreement 101114987, financed by the European Union. R.M. acknowledges support from Agencia Estatal de Investigación (RYC2021-031578-I, PID2022-137777NA-I00, CEX2021-001202-M). J.-L.T. is grateful to the ICREA Academia program and Agencia Estatal de Investigación (PID2023-146623NB-I00, CEX2023-001300-M).