Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 9
Encontrada(s) 1 página(s)

UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Exploratory numerical simulation of pressure build-up and temperature stratification in cryogenic hydrogen tanks engulfed in fire using OpenFoam

  • Zhang, Muchen|||0009-0007-4904-9293
  • Papadaki, Artemis|||0000-0002-8972-2178
  • Meneses Gelves, Jairo Andrés|||0009-0002-1790-3997
  • Vacca, Pascale|||0000-0001-5863-1030
  • Agueda Costafreda, Alba|||0000-0001-5021-8014
  • Pastor Ferrer, Elsa|||0000-0002-2985-3635
  • Planas Cuchi, Eulàlia|||0000-0002-7053-3959
Liquefied hydrogen (LH2) is a key component in the global transition to clean energy systems, offering high energy density and versatility as a sustainable energy carrier. However, its cryogenic nature and high reactivity pose significant fire safety challenges, particularly in scenarios involving storage tanks exposed to fire. One critical hazard is the potential for boiling liquid expanding vapour explosions, which can result from rapid pressure build-up in cryogenic tanks under thermal stress. Understanding pressure build-up and temperature stratification in such conditions is crucial for risk assessment and the design of effective safety measures. This exploratory study adapts an OpenFOAM-based model, originally developed for propane tanks engulfed in fire, to simulate the complex behaviour of LH2 storage tanks. The model incorporates two-phase cryogenic hydrogen thermophysical properties, and transient thermal stratification effects, using the Volume of Fluid method. Conjugate heat transfer is considered for the fire heat flux interactions between the external fire, the tank wall and the LH2. The results are compared with experimental data from medium-scale fire tests on LH2 tanks. Preliminary findings demonstrate the capability of the developed method in modelling the heat transfer and phase change dynamics using an open-source CFD software, while underscoring the challenges and necessity of hydrogen-specific adaptations for phase change and compressibility effects. Future efforts will focus on refining the model to include para-hydrogen properties and expanding its applicability to broader scenarios., The first and third authors work within the framework of Project 101119358, ‘PROSAFE', funded by the Marie Skłodowska-Curie Actions programme, HORIZON-MSCA-2022-DN-01. A. Papadaki is funded by Joan Oró grant (ref. no 2023 FI-1 00913). A. Agueda is a Serra Hunter fellow. This work was also partly funded by Grant PID2023-150607OB-100 funded by MICIU/AEI/ 10.13039/501100011033 and by ERDF/EU.
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Exploratory analysis of the HIAD database: a machine learning approach to support hydrogen risk assessment

  • Meneses Gelves, Jairo Andrés|||0009-0002-1790-3997
  • Amaya Gómez, Rafael
  • Vacca, Pascale|||0000-0001-5863-1030
  • Pastor Ferrer, Elsa|||0000-0002-2985-3635
The growing interest in hydrogen technologies due to the global energy transition introduces unknown safety challenges arising from the unique physicochemical properties of hydrogen. Although previous studies have explored the application of machine learning to extract lessons learned from historical incidents and accident databases from the chemical industry, research specifically focused on hydrogen-related events remains limited. Tamascelli et al. (2022) utilized classification models trained on the Major Hazard Incident Data Service (MHIDAS) to estimate the severity of chemical accidents. Tamascelli et al. (2023) extended this approach using meta-learning and transfer-learning techniques in the context of ammonia. Similarly, Kurian et al. (2020) applied supervised learning and keyword analysis to a database of oil sands incident reports, developing trend analyses, risk matrices, and prevention strategies. While these studies highlight the potential of machine learning to extract insights from historical accident and incident data in conventional chemical facilities, there remains a significant gap regarding a systematic analysis of the data collected for hydrogen-related accidents and incidents. This gap constrains the applicability of such tools in supporting hydrogen-specific safety strategies. The present study analyses the application of machine learning techniques to historical hydrogen-related accidents and incident databases. The database in this study is the Hydrogen Incidents and Accidents Database (HIAD) version 2.1 (JCR, 2025). HIAD is an open-access repository with 954 documented hydrogen-related events compiled from public sources, including scientific publications, inspection reports, and news media. This study proposes a structured data preprocessing framework tailored to machine learning applications to gain insight on hydrogen-related events. It includes an exploratory and unsupervised learning assessment to detect hidden relationships between input features and accident outcomes (e.g., fatalities or injuries). This work is aligned with the implementation of Safety 5.0 principles, which aims to incorporate artificial intelligence, digital technologies, and real-time analytics into risk management practices (Pasman & Behie, 2024). Post-accident analysis and safety-informed decision making can benefit from identifying how machine learning approaches can extract meaningful patterns from structured hydrogen-related events. Future research could expand on these findings by combining machine learning with conventional Quantitative Risk Analysis (QRA) methodologies to improve risk assessment in hydrogen facilities., The first author works within the framework of Project 101119358, ‘PROSAFE’, funded by the Marie Skłodowska-Curie Actions programme, HORIZON-MSCA-2022-DN-01. This work was also partly funded by Grant PID2023-150607OB-I00 funded by MICIU/AEI/ 10.13039/501100011033 and by ERDF/EU. European Hydrogen Incidents and Accidents database HIAD 2.1, European Commission, Joint Research Centre., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Comparison of quantitative risk analysis methodologies for hydrogen refueling stations

  • Meneses Gelves, Jairo Andrés|||0009-0002-1790-3997
  • Saturnino, Lorenza
  • Vacca, Pascale|||0000-0001-5863-1030
  • Pastor Ferrer, Elsa|||0000-0002-2985-3635
  • Planas Cuchi, Eulàlia|||0000-0002-7053-3959
Hydrogen is increasingly recognized as a key energy vector offering advantages over traditional fossil fuels, particularly regarding its absence of greenhouse gas emissions. To support the energy transition, Hydrogen Refuelling Station (HRS) facilities are designed to store, compress, and dispense hydrogen fuel for hydrogen-powered vehicles. Hydrogen has unique properties that require specific safety considerations, such as its wide flammability range and low minimum ignition energy, which can easily cause fires in case of leakage. For this reason, HRS require specialized equipment and safety protocols. Quantitative Risk Analysis (QRA) is used in these facilities to quantify risk numerically. This study compares QRA methodologies for HRS across different countries, focusing on the analysed equipment, the considered initiating events and scenarios, the analysis of frequencies, and the risk metrics. The analysis revealed variations in individual risk results, arising from differences in hazard identification, initiating event selection, frequency of the initiating events, and ignition probabilities. The results highlight the need to harmonize QRA methodologies, particularly in HRSs, to ensure consistency and robustness in risk analysis, particularly when guiding land-use planning policies and practices., The first and second authors work within the framework of Project 101119358, ‘PROSAFE', funded by the Marie Skłodowska-Curie Actions programme, HORIZON-MSCA-2022-DN-01. This work was also partly funded by Grant PID2023-150607OB-100 funded by MICIU/AEI/ 10.13039/501100011033 and by ERDF/EU.
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Risk analysis of hydrogen refueling stations through bayesian networks and hiad database

  • Meneses Gelves, Jairo Andrés|||0009-0002-1790-3997
  • Vacca, Pascale|||0000-0001-5863-1030
  • Planas Cuchi, Eulàlia|||0000-0002-7053-3959
  • Pastor Ferrer, Elsa|||0000-0002-2985-3635
As hydrogen deployment grows, hydrogen refuelling stations (HRSs) are becoming a fundamental infrastructure in urban and industrial environments. This expansion makes land-use planning (LUP) an essential component of hydrogen safety assessment, since decisions on facility siting, separation distances, and exposure of nearby populations depend on the risk assessment methodology to support planning and permitting. In this context, quantitative risk analysis (QRA) provides a conventional framework for estimating accident frequencies and consequences to help LUP decisions. Conventional QRA typically relies on fault tree (FTA) and event tree (ETA) analyses. Within this structure, fault trees represent causes leading to a top event, such as hydrogen release, while event trees depict possible post-release outcomes, such as a jet fire, flash fire or vapour cloud explosion (VCE). However, the frequency of accident-initiating events involving hydrogen, which is key for FTA and ETA frameworks, is limited by the scarcity of hydrogen-specific failure data. Many studies derive these frequencies from conventional fuels or generic databases, but hydrogen's unique properties (such as low ignition energy and rapid dispersion) need more tailored risk analysis approaches. In this context, Bayesian Networks (BNs) offer a probabilistic framework for representing causal dependencies among events and updating probabilities when new evidence is introduced. Unlike static FTA/ETA approaches, a BN enables posterior inference across parent and child nodes and incorporates operational observations, expert insights, and accident evidence. This feature allows the analysis of how prior failure probabilities change after conditioning on observed evidence, the examination of how the model's probabilistic assumptions relate to recorded accident information, and the diagnosis of the system by identifying the causes most strongly associated with the observed outcomes. The present study develops a Bayesian network-based analysis for a HRS. This study follows the approach by Xiao et al. (2024) in which fault tree and event tree are mapped into a dynamic Bayesian network for an HRS (see Figure 1). Based on information gathered in the Hydrogen Incident and Accident Database (HIAD), which compiles recorded hydrogen-related incidents and accidents from different applications and operational contexts and includes information on accident circumstances, initiating events, involved equipment, and observed consequences, evidence was set into the BN to analyse how the probabilities of parent and child nodes change using 12 HRS accidents recorded up to 2025 (Joint Research Centre, 2025). In this way, the accident records were used to examine the behaviour of the original network structure under evidence-based updating. The results show that incorporating HIAD-based evidence modifies the probability distributions of both parent and child nodes. The posterior probabilities of the final scenarios vary depending on the accident evidence introduced. The analysis also shows that accident records can be used to compare prior model assumptions with posterior results obtained after evidence propagation. From a methodological perspective, this allows the FTA/ETA-based accident representation to be linked with an updateable probabilistic structure for hydrogen-specific risk analysis in HRS applications. This approach is intended to support the treatment of hydrogen-specific uncertainty in QRA.
UPCommons. Portal del coneixement obert de la UPC
Publicación Estudio, informe, memoria (Report)

Quantitative risk assessment of ammonia bunkering operations at the Port of Barcelona

  • Saturnino, Lorenza
  • Meneses Gelves, Jairo Andrés|||0009-0002-1790-3997
  • Muñoz Messineo, Miguel
  • Ruiz, Daniel
  • Pastor Ferrer, Elsa|||0000-0002-2985-3635
  • Planas Cuchi, Eulàlia|||0000-0002-7053-3959
This report presents a quantitative risk assessment of ship-to-ship and multi-truck-to-ship liquid ammonia bunkering operation at the Port of Barcelona., Ammonia is increasingly considered as a low-carbon marine fuel, but its introduction into port bunkering operations requires careful assessment of the risks associated with accidental releases. This study presents a quantitative risk assessment (QRA) of refrigerated ammonia bunkering operations at the Port of Barcelona, considering both Ship-to-Ship (STS) and Multi-Truck-to-Ship (MTTS) configurations. The assessment was performed using DNV SAFETI v9.11 and included hazard identification, loss-of-containment scenario definition, frequency analysis, event-tree modelling, consequence assessment, planning-zone determination, Location-Specific Individual Risk (LSIR) and societal risk. Ammonia was modelled as both a toxic and flammable substance, considering toxic dispersion, jet fire, pool fire, flash fire, vapour cloud explosion and, where applicable, BLEVE scenarios. The results show that toxic dispersion is the dominant hazard, producing significantly larger consequence distances than thermal-radiation and explosion effects. The maximum Intervention and Alert Zone distances were approximately 1.1 km and 3.9 km, respectively, under stable low-wind conditions. Individual-risk results indicate that bunkering suitability depends strongly on location, transfer configuration and proximity to publicly accessible areas. In particular, STS bunkering at Pier 01D produced a 10¿6 yr¿¹ LSIR contour extending across Pont Porta d’Europa, whereas the corresponding MTTS configurations remained within the port area. Societal-risk results showed that the cumulative f–N curve exceeded the adopted acceptability criterion, although most individual operations remained below it; the main exceptions were associated with cruise-terminal areas characterised by higher population density. The study demonstrates that ammonia bunkering can be implemented at selected port locations provided that location-specific risk criteria are satisfied and appropriate technical, operational and emergency-response measures are applied. Particular attention should be given to transfer-hose integrity, emergency shutdown and isolation systems, simultaneous operations and meteorological operating limits.
UPCommons. Portal del coneixement obert de la UPC
Publicación Estudio, informe, memoria (Report)

Quantitative risk assessment of liquid hydrogen bunkering operations at the Port of Barcelona

  • Meneses Gelves, Jairo Andrés|||0009-0002-1790-3997
  • Saturnino, Lorenza
  • Muñoz Messineo, Miguel
  • Ruiz, Daniel
  • Pastor Ferrer, Elsa|||0000-0002-2985-3635
  • Planas Cuchi, Eulàlia|||0000-0002-7053-3959
This report presents a quantitative risk assessment of ship-to-ship and multi-truck-to-ship liquid hydrogen bunkering operation at the Port of Barcelona., The introduction of liquid hydrogen bunkering requires ports to assess risks to workers, surrounding activities and people not involved in the operation. This study presents a quantitative risk assessment of 21 representative ship-to-ship (STS) and multi-truck-to-ship (MTTS) configurations across seven piers and an offshore anchorage at the Port of Barcelona. Hazard identification, release frequencies and event trees were combined with consequence modelling in SAFETI v9.11 to evaluate individual and societal risk. Three explosion modelling approaches were compared, namely Multi-Energy curves 5 and 8 and Baker–Strehlow–Tang with a flame Mach number of 0.35. Model selection substantially affected the results. For an instantaneous road-tanker release, the explosion alert distance ranged from 275 m with curve 5 to 494 m with curve 8. The latter approach also produced maximum intervention and domino-effect distances of 276 and 246 m, respectively. Its societal-risk curve was approximately one order of magnitude higher than those obtained with the alternative models. At a cruise-terminal location, the 10¿6 yr¿¹ individual-risk contour reached a public roadway for STS bunkering, whereas the assessed MTTS alternatives avoided this interaction. Neighbouring operations increased individual risk where their contours overlapped. Traffic-light suitability maps were developed from the individual-risk results to support the selection of bunkering locations and the coordination of operations. The findings highlight the importance of considering modelling uncertainty, population exposure and interactions between simultaneous activities when planning the safe introduction of liquid hydrogen bunkering.
Recercat. Dipósit de la Recerca de Catalunya
Publicación

Quantitative risk assessment of liquid hydrogen bunkering operations at the Port of Barcelona

  • Meneses Gelves, Jairo Andrés
  • Saturnino, Lorenza
  • Muñoz Messineo, Miguel
  • Ruiz, Daniel
  • Pastor Ferrer, Elsa
  • Planas Cuchi, Eulàlia
This report presents a quantitative risk assessment of ship-to-ship and multi-truck-to-ship liquid hydrogen bunkering operation at the Port of Barcelona., The introduction of liquid hydrogen bunkering requires ports to assess risks to workers, surrounding activities and people not involved in the operation. This study presents a quantitative risk assessment of 21 representative ship-to-ship (STS) and multi-truck-to-ship (MTTS) configurations across seven piers and an offshore anchorage at the Port of Barcelona. Hazard identification, release frequencies and event trees were combined with consequence modelling in SAFETI v9.11 to evaluate individual and societal risk. Three explosion modelling approaches were compared, namely Multi-Energy curves 5 and 8 and Baker–Strehlow–Tang with a flame Mach number of 0.35. Model selection substantially affected the results. For an instantaneous road-tanker release, the explosion alert distance ranged from 275 m with curve 5 to 494 m with curve 8. The latter approach also produced maximum intervention and domino-effect distances of 276 and 246 m, respectively. Its societal-risk curve was approximately one order of magnitude higher than those obtained with the alternative models. At a cruise-terminal location, the 10¿6 yr¿¹ individual-risk contour reached a public roadway for STS bunkering, whereas the assessed MTTS alternatives avoided this interaction. Neighbouring operations increased individual risk where their contours overlapped. Traffic-light suitability maps were developed from the individual-risk results to support the selection of bunkering locations and the coordination of operations. The findings highlight the importance of considering modelling uncertainty, population exposure and interactions between simultaneous activities when planning the safe introduction of liquid hydrogen bunkering., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Exploratory numerical simulation of pressure build-up and temperature stratification in cryogenic hydrogen tanks engulfed in fire using OpenFoam

  • Zhang, Muchen
  • Papadaki, Artemis
  • Meneses Gelves, Jairo Andrés
  • Vacca, Pascale
  • Agueda Costafreda, Alba
  • Pastor Ferrer, Elsa
  • Planas Cuchi, Eulàlia
Liquefied hydrogen (LH2) is a key component in the global transition to clean energy systems, offering high energy density and versatility as a sustainable energy carrier. However, its cryogenic nature and high reactivity pose significant fire safety challenges, particularly in scenarios involving storage tanks exposed to fire. One critical hazard is the potential for boiling liquid expanding vapour explosions, which can result from rapid pressure build-up in cryogenic tanks under thermal stress. Understanding pressure build-up and temperature stratification in such conditions is crucial for risk assessment and the design of effective safety measures. This exploratory study adapts an OpenFOAM-based model, originally developed for propane tanks engulfed in fire, to simulate the complex behaviour of LH2 storage tanks. The model incorporates two-phase cryogenic hydrogen thermophysical properties, and transient thermal stratification effects, using the Volume of Fluid method. Conjugate heat transfer is considered for the fire heat flux interactions between the external fire, the tank wall and the LH2. The results are compared with experimental data from medium-scale fire tests on LH2 tanks. Preliminary findings demonstrate the capability of the developed method in modelling the heat transfer and phase change dynamics using an open-source CFD software, while underscoring the challenges and necessity of hydrogen-specific adaptations for phase change and compressibility effects. Future efforts will focus on refining the model to include para-hydrogen properties and expanding its applicability to broader scenarios., The first and third authors work within the framework of Project 101119358, ‘PROSAFE', funded by the Marie Skłodowska-Curie Actions programme, HORIZON-MSCA-2022-DN-01. A. Papadaki is funded by Joan Oró grant (ref. no 2023 FI-1 00913). A. Agueda is a Serra Hunter fellow. This work was also partly funded by Grant PID2023-150607OB-100 funded by MICIU/AEI/ 10.13039/501100011033 and by ERDF/EU., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación

Quantitative risk assessment of ammonia bunkering operations at the Port of Barcelona

  • Saturnino, Lorenza
  • Meneses Gelves, Jairo Andrés
  • Muñoz Messineo, Miguel
  • Ruiz, Daniel
  • Pastor Ferrer, Elsa
  • Planas Cuchi, Eulàlia
This report presents a quantitative risk assessment of ship-to-ship and multi-truck-to-ship liquid ammonia bunkering operation at the Port of Barcelona., Ammonia is increasingly considered as a low-carbon marine fuel, but its introduction into port bunkering operations requires careful assessment of the risks associated with accidental releases. This study presents a quantitative risk assessment (QRA) of refrigerated ammonia bunkering operations at the Port of Barcelona, considering both Ship-to-Ship (STS) and Multi-Truck-to-Ship (MTTS) configurations. The assessment was performed using DNV SAFETI v9.11 and included hazard identification, loss-of-containment scenario definition, frequency analysis, event-tree modelling, consequence assessment, planning-zone determination, Location-Specific Individual Risk (LSIR) and societal risk. Ammonia was modelled as both a toxic and flammable substance, considering toxic dispersion, jet fire, pool fire, flash fire, vapour cloud explosion and, where applicable, BLEVE scenarios. The results show that toxic dispersion is the dominant hazard, producing significantly larger consequence distances than thermal-radiation and explosion effects. The maximum Intervention and Alert Zone distances were approximately 1.1 km and 3.9 km, respectively, under stable low-wind conditions. Individual-risk results indicate that bunkering suitability depends strongly on location, transfer configuration and proximity to publicly accessible areas. In particular, STS bunkering at Pier 01D produced a 10¿6 yr¿¹ LSIR contour extending across Pont Porta d’Europa, whereas the corresponding MTTS configurations remained within the port area. Societal-risk results showed that the cumulative f–N curve exceeded the adopted acceptability criterion, although most individual operations remained below it; the main exceptions were associated with cruise-terminal areas characterised by higher population density. The study demonstrates that ammonia bunkering can be implemented at selected port locations provided that location-specific risk criteria are satisfied and appropriate technical, operational and emergency-response measures are applied. Particular attention should be given to transfer-hose integrity, emergency shutdown and isolation systems, simultaneous operations and meteorological operating limits., Postprint (published version)