Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 6
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Data-Driven Relationship for Reduction Factor of Ballasted Railway Bridge Deflections Due to Load Distribution Within Track

  • Allahvirdizadeh, Reza
  • Moliner, Emma
  • Museros Romero, Pedro|||0000-0002-1389-0204
[EN] Increasing the operating speed of the trains on modern networks necessitates performing dynamic analyses to assess the performance of bridges under passage of trains. The detailed investigation of their responses requires constructing complex computational models capable to take the train-track-bridge interaction effects into account. Such models have successfully been developed; however, employing those elaborated models for practical engineering applications, or to perform studies that require a large number of analyses may become infeasible. Among such situations are conducting probabilistic investigations, screening of entire networks, or sensitivity analyses. These concerns have been addressed by employing simplified models mostly relying on moving load modeling strategy which disregards the train-track-bridge interaction effects. Those neglected contributions can be compensated by implementing additional correction factors. The distribution of loads within track is one of those disregarded effects where a reduction factor is recommended by design guidelines to take its contribution into account. It has been shown that the existing relationship for these reduction factors delivers an acceptable performance for vertical accelerations, while showing a less favorable performance for displacements. Then, a data-driven strategy is adopted in this study to propose easy-to-apply relationships for reduction factors of deflections, due to load distribution within the track. In this context, three different distributive lengths of triangular load footprints have been considered, namely 2.0, 2.5 and 3.0m. The procedure employed has trained and tested for more than 1200 train configurations, comprising conventional, articulated and regular vehicles, and including several tens of thousand data points for each distributive length. The performance observed in the new models revealed a considerable improvement with respect to the existing relationship., The first author would like to acknowledge IAM4RAIL project. The project is supported by the Europe's Rail Joint Undertaking and its members. This project hasreceived funding from the European Union's Horizon Europe research and innovation program under Grant Agreement No. 101101966. The authorswould like alsoto acknowledge the financial support of the project InBridge4EU funded by the Europe's Rail Joint Undertaking under Horizon Europe research and innovation program under Grant Agreement No.101121765 (HORIZON-ER-JU-2022-ExplR-02). Part of this investigation was developed in the framework of research project Grant RTI2018-093621-B-I00, "Simulacion integrada no lineal del comportamientoestructural de puentes ferroviarios de fabrica ante acciones dinamicas y nuevosrequerimientos de trafico", funded in Spain by MCIN/AEI/10.13039/501100011033 and by "ERDF A way of making Europe".
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Tesis de maestría (MasterThesis)

Análisis del comportamiento dinámico de puentes continuos de dos vanos ante tráfico ferroviario: aplicación al puente sobre el rio Lödge., Analysis of the dynamic behaviour of continuous two-span bridges under railway traffic: application to the bridge over the Lödge river, Anàlisi del comportament dinàmic de ponts continus de dues vans davant el trànsit ferroviari: aplicació al pont sobre el riu Lödge

  • Cueva Rodríguez, Willan Enrique
[ES] Este Trabajo Fin de Máster (TFM) presenta un análisis detallado de la respuesta dinámica de puentes de ferrocarril continuos de dos vanos, con el objetivo de proponer y validar un método de cálculo simplificado, el método LIR, bajo las acciones del tráfico ferroviario. El estudio se apoya en la normativa Eurocódigo (EN 1991-2), que define las cargas de diseño y, en este caso, se ha utilizado el modelo de carga normalizado HSLM-A, diseñado para trenes de alta velocidad. El trabajo aborda el puente de dos vanos como un caso estructural singular, caracterizado por una respuesta modal combinada. Se desarrolla la formulación matemática para el primer modo de vibración, obteniendo una solución analítica completa. Para el segundo modo de vibración, se propone y desarrolla una solución analítica-numérica. La validación de ambas formulaciones se realiza de forma rigurosa mediante códigos de programación en MATLAB. La aplicabilidad del método LIR se demuestra a través de cuatro casos de estudio, variando las características geométricas y mecánicas del puente. Para cada caso, se analiza el comportamiento dinámico de la estructura ante el paso de los trenes del modelo de carga HSLM-A. Los resultados se combinan utilizando los métodos SRSS y CQC, validando la alta precisión del método LIR para predecir picos de resonancia. Se demuestra que, a pesar de las discrepancias en los valles de la curva, el método propuesto acierta de manera sobresaliente en los puntos críticos de diseño, con un porcentaje de error en picos generalmente inferior al 5%. Finalmente, se pone a prueba la utilidad del método en dos casos de aplicación real: el puente inicialmente propuesto sobre el río Lögde, y también el denominado puente de Förslov, cuya solución constructiva en hormigón permite además realizar un diseño preliminar del pretensado. Aunque no se han abordado las comprobaciones de los estados límite últimos, sí se han verificado los estados límite de servicio específicamente la aceleración y el desplazamiento vertical del tablero, demostrando la utilidad práctica del método propuesto para la ingeniería estructural. En conclusión, este trabajo valida el LIR como una metodología eficaz y fiable para el análisis dinámico de puentes de ferrocarril, permitiendo a los ingenieros realizar estudios de vibración complejos de manera ágil, garantizando así la seguridad estructural bajo los estándares de las normativas vigentes., [EN] This Master's Thesis (TFM) presents an in-depth analysis of the dynamic response of continuous two-span railway bridges, with the aim of proposing and validating a simplified calculation method, the LIR approach, under the actions of railway traffic. The study is based on the Eurocode standard (EN 1991-2), which defines the design loads and, in this case, the HSLM-A standardised load model, designed for high-speed trains, has been used. The work approaches the two-span bridge as a singular structural case, characterized by a complex modal response. The mathematical formulation for the first vibration mode is developed, obtaining a complete analytical solution. For the second vibration mode, a semi-analytical-numerical solution is proposed and developed. The validation of both formulations is rigorously carried out using programming codes in MATLAB. The applicability of the LIR method is demonstrated through four case studies, varying the geometric and mechanical characteristics of the bridge. For each case, the dynamic behaviour of the structure is analysed when the trains of the HSLM-A load model pass through. The results are combined using the SRSS and CQC methods, validating the high accuracy of the LIR approach, to predict resonance peaks. It is shown that, despite the discrepancies in the valleys of the curve, the proposed method is outstanding at the critical design points, with a peak error percentage generally less than 5%. Finally, the usefulness of the method is tested in a real application case, the Förslov bridge, where a prestressing design and a dynamic analysis are carried out. Although the checks of the ultimate limit states have not been addressed, the service limit states have been verified, specifically the acceleration and vertical displacement of the deck, demonstrating the practical usefulness of the proposed method for structural engineering. In conclusion, this work validates the LIR approach as an effective and reliable methodology for the dynamic analysis of railway bridges, allowing engineers to perform complex vibration studies in an agile way, thus guaranteeing structural safety under the standards of current regulations., Financial support of project InBridge4EU, funded by Europe’s Rail Joint Undertaking under Horizon Europe research and innovation programme under Grant Agreement No. 101121765 (HORIZON-ERJU-2022-ExplR-02), is gratefully acknowledged.
Archivo Digital UPM
Publicación Artículo científico (JournalArticle)

Exploring the potential of the semi-active inertial absorber in control resonant effects for short-to-medium span high-speed railway bridges

  • Nguyen, Gia Khanh|||0000-0001-7552-2434
  • Soria Herrera, José Manuel|||0000-0003-1616-6585
  • Muñoz Díaz, Iván|||0000-0001-9283-5109
  • Goicolea Ruigómez, José María|||0000-0003-0328-7345
Archivo Digital UPM
Publicación Artículo científico (JournalArticle)

CALDINTAV: A simple software for dynamic analysis of high-speed railway bridges using the semi-analytical modal method

  • Nguyen, Gia Khanh|||0000-0001-7552-2434
  • Goicolea Ruigómez, José María|||0000-0003-0328-7345
Archivo Digital UPM
Publicación Otros (Other)

CALDINTAV 3.0. Dynamic calculation of railway bridges : Guide for Vehicle-Bridge simplified interaction

  • Goicolea Ruigómez, José María|||0000-0003-0328-7345
  • Nguyen, Gia Khanh|||0000-0001-7552-2434
  • Antolín Sánchez, Pablo
  • Domínguez Barbero, Jaime
  • Velarde Ortega, Carlos
Archivo Digital UPM
Publicación Artículo científico (JournalArticle)

A general and robust 3D finite element dynamics framework for railway vehicle-bridge interaction with nonlinear wheel-rail contact modeling

  • Antolín Sánchez, Pablo
  • Nguyen, Gia Khanh|||0000-0001-7552-2434
  • Goicolea Ruigómez, José María|||0000-0003-0328-7345