Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 3
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Estimación de parámetros biofísicos de la vegetación en praderas y cultivos en Chile mediante fotografía digital hemisférica obtenidas por una cámara GoPro, Estimation of vegetation biophysical parameters in grasslands and crops in Chile through hemispheric digital photography by a GoPro camera

  • Uribe, D.
  • Mattar, C.
  • Camacho, F.
[EN] The estimation of the biophysical parameters of vegetation such as LAI (Leaf Area Index), FAPAR (Fraction of Absorbed Photosynthetically Active Radiation) and FCOVER (Fraction of Green Vegetation) have many climatic, hydrologic, ecosystem and silvo-agricultural applications. Despite the various satellite products that estimate these parameters continuously and globally, it’s necessary to continue generating in situ estimations to validate these remote data. It’s in this context where Digital Hemispheric Photography (DHP) technique stands out as being one of the most accurate an adaptable to operate continuously with diverse photographic equipment and field scenarios. The objective of this paper is to estimate effective LAI (LAIeff), true LAI (LAItrue), FAPAR and FCOVER through the DHP method on several agricultural land covers in Chile, between the years 2015 and 2016 using a GoPro camera and the CAN-EYE software to process hemispheric photographs. The results obtained were initially compared with those provided by a CANON EOS 6D camera mounted together with a SIGMA 8mm F3.5-EX DG fisheye lens and subsequently with satellite products provided by the Copernicus Global Land service, derived from PROBA-V mission at 333 m2 spatial resolution. The comparison between the CANON and GoPro shows similar values and R2 over 0,72 for all parameters. The comparison with PROBA-V resulted in values over 0,52 of R2 for the parameters, and similar multitemporal patterns. It’s concluded that it’s possible to estimates LAIeff, FAPAR and FCOVER like other fish eyes cameras. Concerning PROBA-V, except for FAPAR, the estimates with the GoPro do not show much correlation. In both campaigns significant discrepancies were observed in the LAItrue, which could be related to the calculation of CAN-EYE canopy clumping with the characteristics of the camera itself., [ES] La estimación de los parámetros biofísicos de la vegetación como el LAI (Leaf Area Index, FAPAR (Fraction of Absorbed Photosynthetically Active Radiation) y FCOVER (Fraction of Green Vegetation) tienen una gran cantidad de aplicaciones climáticas, hidrológicas, ecosistémicas y en sistemas silvoagropecuarios. A pesar de los diversos productos satelitales que estiman estos parámetros de forma continua y global, es necesario seguir generando estimaciones in situ para validar estos datos remotos. Es en este escenario en donde la técnica de Fotografía Digital Hemisférica (DHP) destaca por ser una de las más precisas y adaptables para funcionar de forma continua en diversos equipos fotográficos y escenarios de campo. El objetivo de este estudio es estimar el LAI efectivo (LAIeff), LAI verdadero (LAItrue), FAPAR y FCOVER a través del método DHP sobre diversas cubiertas agrícolas de Chile, entre los años 2015 y 2016 utilizando la cámara fotográfica GoPro y el software CAN-EYE para procesar las fotografías hemisféricas. Los resultados obtenidos se compararon inicialmente con los suministrados por una cámara CANON EOS 6D montada junto a un lente ojo de pez SIGMA 8mm F3.5-EX DG y posteriormente con productos satelitales proporcionados por el servicio Copernicus Global Land, derivado de la misión PROBA-V a 333 m2 de resolución espacial. La comparación entre las cámaras CANON y GoPro muestra estimaciones similares y valores de R2 sobre 0,72 para todos los parámetros. La comparación con PROBA-V dio lugar a valores sobre 0,52 de R2 para los parámetros y estimaciones multitemporales con patrones similares. Se concluye que con la cámara GoPro, es posible generar estimaciones de LAIeff, FAPAR y FCOVER de forma similar a otras cámaras ojos de pez. Respecto a PROBA-V, a excepción de FAPAR, las estimaciones con la GoPro no muestran mucha correlación. En ambas campañas se observaron discrepancias significativas del LAItrue lo que se podría relacionar al cálculo del agrupamiento de la canopia de CAN-EYE sobre las características propia cámara., Los autores agradecen el financiamiento parcial del proyecto Conicyt – Fondecyt Iniciación 11130359 “Estimating the Surface soil moisture at regional scale by using a synergic optical-passive microwave approach and remote sensing data”. Al Earth Observation Laboratory (EOLAB) y al proyecto IMAGINES, junto con la libre entrega de datos PROBA-V Copernicus
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

LAI, FAPAR and FCOVER ground-truth map creation from FASat-C satellite imagery and in-situ measurements in Chimbarongo, Chile, for satellite products validation, Obtención de mapas verdad-terreno de LAI, FAPAR y cobertura vegetal a partir de imágenes del satélite chileno FASat-C y medidas in-situ en la zona agrícola de Chimbarongo, Chile, para la validación de productos de satélite

  • Latorre-Sánchez, C.
  • Camacho, F.
  • Mattar, C.
  • Santamaría-Artigas, A.
  • Leiva-Büchi, N.
  • Lacaze, R.
[EN] In remote sensing, validation exercises are essential to ensure the quality of the products originated from satellite Earth observations. To assess the measurement uncertainty derived from satellite products, several ground field data from different ecosystems must be available for use. In the same order of importance, it is necessary to define data sampling and up-scaling methodologies to allow a suitable comparison between the ground data and the pixel size of the product. This paper shows the applied methodology used in the FP7 ImagineS project (Implementing Multi-scale Agricultural Indicators Exploiting Sentinels) to validate 10-days global LAI, FAPAR and vegetation cover products at 1km spatial resolution using in-situ data. These global products are derived from PROBA-V observations in the Copernicus Global Land Service. In particular, this case study shows the results of the field-campaign carried out in January of 2015 in the agricultural area of Chimbarongo, Chile. The methodology to scale the ground data and to create ground-based maps using FASat-C Chilean satellite imagery with a 5,8 m spatial resolution using multivariate least squares regression is shown. Finally, the same methodology was used with a 30 m spatial resolution Landsat-8 image to analyze the effect of the field-data input on the ground-truth maps used to validate the results. Our results show the reliability on the presented methodology and the consistency of the method with regard to the input data. Better results and lower RMSE errors were obtained using FASat-C data. The comparison with satellite products at 1 km shows a good agreement with Copernicus Global Land products derived from PROBA-V observations, and systematic negative bias for the MODIS products., [ES] El proceso de validación es fundamental en teledetección para garantizar la calidad de los productos obte-nidos a partir de las observaciones de satélite. En el caso concreto de productos de vegetación, es necesario disponer de datos verdad-terreno de diferentes tipos de ecosistemas, y desarrollar estrategias de muestreo y escalado que permitan la caracterización de la superficie y la correcta relación del tamaño de pixel que se desea validar. En este caso práctico, se presenta la metodología aplicada en el contexto del proyecto FP7 ImagineS (Implementing Multi-scale Agricultural Indicators Exploiting Sentinels) para la validación a partir de datos in-situ de los productos globales de LAI, FAPAR y cobertura vegetal. Estos productos se generan de forma operativa a 1 km de resolución espacial y 10 días de frecuencia temporal a partir de las observaciones de PROBA-V en la componente global del servicio europeo Coperni-cus de superficie terrestre (Copernicus Global Land Service). En particular, se presentan los resultados de la campaña de campo realizada en enero de 2015 en la zona agrícola de Chimbarongo, Chile, donde se aplica la metodología de escalado de datos de campo y generación de mapas verdad-terreno a partir de las observaciones del satélite chileno FASat-C de 5,8 m de resolución espacial, y utilizando técnicas de regresión multivariada por mínimos cuadrados. Finalmente, se ha aplicado el método a una imagen Landsat-8 de 30 m de resolución para analizar la influencia de la imagen en los mapas verdad-terreno utilizados para validar. Los resultados demuestran la fiabilidad de la metodología empleada, y la consistencia del método respecto a la imagen de alta resolución utilizada, obteniéndose un menor RMSE en los mapas generados a partir de FASat-C de mayor resolución espacial. Los mapas verdad-terreno se han comparado con los productos generados a partir de PROBA-V a 1 km en Copernicus Global Land y con el producto de MODIS también de 1 km, mostrando PROBA-V muy buen acuerdo en la zona de estudio, mientras que MODIS presenta un bias negativo respecto a los mapas verdad-terreno en la zona de estudio., Este estudio está financiado por el proyecto FP7 ImagineS n° 311766 de la Comunidad Europea. La organización de la campaña de campo, junto a la adquisición de las imágenes del sistema satelital chileno FASat-C ha sido posible gracias al Laboratorio para el Análisis de la Biosfera de la Universidad de Chile (LAB), en el marco del proyecto Fondecyt Iniciación n°11130359 y la Fuerza Aérea de Chile (FACH) a través del Grupo de Operaciones Espaciales (GOE). Las imágenes Landsat-8 de alta resolución han sido proporcionadas por el servicio EarthExplorer de USGS y la NASA
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Tendencia de la cobertura vegetacional afectada por incendios en el Parque Nacional Torres del Paine, Trend in vegetational cover affected by fire in the Torres del Paine National Park

  • Rivera, C.
  • Mattar, C.
  • Durán-Alarcón, C.
[EN] Torres del Paine National Park (PNTP) is characterized as a representative geographical area of the world’s ecosystems, containing high scenic beauty and wide variety of ecosystems. The aim of this work is to analyze the spatial and temporal trends of vegetation at PNTP using remote images from the Landsat platforms, the MOD13A3 product from the Moderate Resolution Imaging Spectroradiometer (MODIS), coverage maps surface Global Land cover Maps of ESA/CCI 2005 and 2010 and a land cover map of continental Chile of 2014. In addition, the products of Soil Moisture and Ocean Salinity (SMOS) and meteorological data from the Torres del Paine meteorological station were used to analyze the environmental conditions that presented the park while the fire occurred the years 2011-2012. To determine the magni­tude of the changes of vegetation affected by fire at PNTP a nonparametric trend analysis was use with the Normalized Difference Vegetation Index (NDVI) of MODIS from 2002 to 2016 and the Normalized Burn Ratio (NBR) for the fire occurred the year 2005 and the years 2011-2012. The results show that between both fires it is been affected more than 30.000 hectares of the national park, being the “Scrub” and “Forest” coverage the most affected due to the high level of severity and the low regeneration of the burn area (less than 56%). The soil moisture does not exceed 20% m3m-3 before the fire and the rainfall does not exceed 101 mm during the days of fire, which is related to an increase in the probability of propa­gation of the fire. In this work is possible to realize that remote sensing can be used in the fire management to regard the national parks with the objective of preserve and conserve the flora, fauna and scenic beauty of Chile., [ES] El Parque Nacional Torres del Paine (PNTP) se caracteriza por ser un área geográfica representativa de los ecosistemas del mundo, al contener una alta belleza paisajística y amplia diversidad de ecosistemas. El objetivo de este trabajo es analizar las tendencias espacio temporales de la vegetación en el PNTP mediante el uso de imágenes remo­tas de la plataforma Landsat, del sensor “Moderate Resolution Imaging Spectroradiometer” (MODIS), correspondientes al producto MOD13A3, los mapas de cobertura de superficie Global Land Cover Maps del ESA/CCI del año 2005 y 2010 y el mapa de cobertura de suelo de Chile continental del 2014. Además, se utilizaron los productos de “Soil Moisture and Ocean Salinity” (SMOS), y datos meteorológicos de la estación meteorológica Torres del Paine para analizar las condiciones ambientales que presentó el parque mientras ocurría el incendio de los años 2011-2012. Para determinar la magnitud de los cambios de la vegetación afectada por incendio del PNTP se realizó un análisis no paramétrico de la tendencia del índice “Normalized Difference Vegetacion Index” (NDVI) de MODIS en el periodo 2002 a 2016 y el índice “Normalized Burn Ratio” (NBR) para los incendios de los años 2005 y 2011-2012. Los resultados muestran que los incendios 2005 y 2011-2012 afectaron a más de 30.000 hectáreas del Parque Nacional, siendo las coberturas de “Matorral” y “Bosque” las más afectadas debido a su alto nivel de severidad y su regeneración menor al 56% de la superficie afectada. En cuanto a la humedad de suelo esta no supera los 20% m3m–3 antes del incendio y las precipitaciones no superan los 101 mm durante los días de incendio lo que se relaciona con un aumento en las probabilidades de propagación del incendio. En este trabajo se evidencia que la teledetección puede ser utilizada en la gestión de incendios y así resguardar los parques nacionales con el fin de preservar y conservar la flora, fauna y belleza paisajística de Chile., Gracias al proyecto Conicyt – Fondecyt Iniciación 11130359 “Estimating the Surface soil moisture at regional scale by using a synergic optical-passive microwave approach and remote sensing data”, a United States Geological Survery (USGS) por el libre acceso a los datos Landsat-5 TM, Landsat-7 ETM+ y Landsat-8 OLI, a la National Aeronautics and Space (NASA) por los productos MODIS y la Dra. María Piles por los productos de humedad de suelo SMOS.