Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 2
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Poisson-like effect for flexural waves in periodically perforated thin plates

  • Gao, Penglin
  • Wu, Linzhi
  • Sánchez-Dehesa Moreno-Cid, José|||0000-0003-0742-4407
[EN] The Poisson-like effect, describing the redirection of waves by 90 degrees, is shown to be feasible for flexural waves propagating in perforated thin plates. It is demonstrated that the lowest order symmetric leaky guided mode (S0 mode) is responsible for the splitting of wave motion in two orthogonal directions. The S0 mode shows a feature of stationary waves containing standing wave modes in one and two orthogonal directions for smaller and larger holes, respectively. The former case is well understood thanks to the phenomenon of Wood's anomaly, which was first observed in optical gratings supposed to be transparent. On the contrary, the strong scattering caused by the larger holes leads to a mixed mode occurring when the incident wave is totally transmitted. The mixed mode easily couples with the incoming waves and, therefore, the Poisson-like effect activated under this mechanism is much stronger. Using the Poisson-like effect, a device is proposed in which about 82% of the incident mechanical energy is redirected to the perpendicular direction. Results obtained with arrays of free holes also apply to inclusions with parameters properly chosen. The findings may provide applications in beam splitting and waveguiding. (C) 2018 Acoustical Society of America., Work supported by the Ministerio de Economia y Competitividad of Spain and the EU Fondo Europeo de Desarrollo Regional under Project No. TEC2014-53088-C3-1-R, and the National Natural Science Foundation of China under Grants Nos. 11432004 and 11421091. P.G. acknowledges a scholarship with No. 201606120070 provided by China Scholarship Council.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Single-phase metamaterial plates for broadband vibration suppression at low frequencies

  • Gao, Penglin
  • Wu, Linzhi
  • Climente Alarcón, Alfonso
  • Sánchez-Dehesa Moreno-Cid, José|||0000-0003-0742-4407
[EN] By studying platonic crystals based on lattices of cavities containing N-beam resonators, we conclude that crystals made of 1-beam resonators easily produce low-frequency omnidirectional bandgaps. Based on this favorable property, hardly obtained for resonant cavities containing a higher number of beams N >= 2, we have designed single-phase metamaterial plates for the suppression of low frequency flexural waves in a broad range of frequencies. These metamaterials are obtained by using resonant cavities containing a multiple number M of identical 1-beam resonators uniformly distributed in the cavity. Square lattices of this type of resonators have been studied by using the impedance matrix approach and the multiple scattering method. This semi-analytical method has been employed to show the existence of complete bandgaps whose width can be optimized by increasing M. For the case M = 4, the largest number of resonators studied here, three complete bandgaps separated by two narrow passbands appear in the band structure. The formation of these complete bandgaps originates from the dynamic interaction between different local resonators as well as their interaction with the propagating waves in the host plate. By using composite structures consisting of platonic crystal slabs with complementary bandgaps, these separated bandgaps easily merge into a broadband wave attenuation region. The normalized width, defined as the percentage of the bandwidth to its central frequency, reaches 95.3%, representing an enhancement of about one order of magnitude compared with the absolute bandwidth obtained for the case of a single 1-beam resonator in the cavity. It is shown that the gaps can be easily tuned to lower frequencies by changing the geometrical parameters, such as the length of the beam, the radius and thickness of the smaller circular plate. Since the metamaterial is made of a single-phase material without attaching heavy masses, the work reported here provides a simple approach to construct low-cost structures with potential applications in aeronautic and astronautic industries for broadband vibration suppression at low frequencies. (C) 2018 Published by Elsevier Ltd., This work was supported by the Ministerio de Economia y Competitividad of the Spanish government and the European Union Fondo Europeo de Desarrollo Regional (FEDER) [Grant No. TEC2014-53088-C3-1-R], and the National Natural Science Foundation of China [Grant Nos. 11432004 and 11421091]. Penglin Gao acknowledges a scholarship provided by China Scholarship Council [Grant No. 201606120070].