Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 4
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Microstructure and Durability Performance of Mortars with Volcanic Powder from Calbuco Volcano (Chile) after 4 Hardening Years

  • Tremiño, Rosa María
  • Letelier, Viviana
  • Ortega, José Marcos
  • Real-Herraiz, Teresa Pilar|||0000-0003-2578-2902
[EN] One of the most popular ways to lessen the impact of the cement industry on the environment consists of substituting clinker by additions. The service life required for real construction elements is generally long, so it would be interesting to obtain information about the effects of new additions after a hardening period of several years. Analyzed here are the effects of the incorporation of volcanic ashes, coming from Calbuco volcano's last eruption (Chile), as clinker replacement, in the durability and pore structure of mortars, after approximately 4 hardening years (1500 days), in comparison with reference specimens without additions. The substitution percentages of clinker by volcanic powder studied were 10% and 20%. The microstructure was characterized with mercury intrusion porosimetry and impedance spectroscopy. In order to evaluate the pozzolanic activity of the volcanic powder after 1500 days, differential thermal analyses were performed. Water absorption after immersion, steady-state diffusion coefficient and length change were also studied. In accordance with the results obtained, the 10% and 20% substitution of clinker by volcanic powder from the Calbuco volcano showed beneficial effects in the mortars after 4 years, especially regarding the microstructure and chloride diffusion, without noticeable influence in their water absorption., This work was supported by the Conselleria de Educacion, Investigacion, Cultura y Deporte (at present re-named as Conselleria de Innovacion, Universidades, Ciencia y Sociedad Digital) de la Generalitat Valenciana (Spain) (grant code GV/2019/070) and by the Agencia Nacional de Investigacion y Desarrollo de Chile (ANID) (grant number FONDECYT REGULAR 1211135).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Microstructure and mechanical properties of ternary mortars with brick powder, glass powder, slag, fly ash, and limestone

  • Tremiño, Rosa María
  • Letelier, Viviana
  • Ortega, José Marcos
  • Real-Herraiz, Teresa Pilar|||0000-0003-2578-2902
[EN] The objective of this research is to study the effects produced by ternary binders which combine the addition of waste brick powder with fly ash, limestone, ground granulated blast furnace slag or waste glass powder in the microstructure and mechanical properties of mortars. In these ternary binders, the ordinary Portland cement was partially replaced by 10% of waste brick powder and 10% of another of the abovementioned additions. Mortars prepared with ordinary Portland cement without additions were also prepared. The microstructure was characterized with mercury intrusion porosimetry, electrical resistivity, and thermogravimetric analyses. Ultrasonic pulse velocity, compressive and flexural strengths were also determined. Mortars made using ternary binders with two active additions showed higher pore refinement and higher electrical resistivity at 250 days. Furthermore, their compressive strength and ultrasonic pulse velocity were relatively similar or even higher than that noted for reference specimens., Conselleria de Educacion, Investigacion, Cultura y Deporte (presently renamed as Conselleria de Innovacion, Universidades, Ciencia y SociedadDigital) de la Generalitat Valenciana, Spain, Grant/Award Number: GV/2019/070; Agencia Nacional de Investigacion y Desarrollo de Chile (ANID), Grant/Award Number: FONDECYT REGULAR 1211135
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Four-years influence of waste brick powder addition in the pore structure and several durability-related parameters of cement-based mortars

  • Tremiño, Rosa María
  • Letelier, Viviana
  • Ortega, Jose Marcos
  • Real-Herraiz, Teresa Pilar|||0000-0003-2578-2902
[EN] The service life of real construction elements is usually long, so the study of the behavior of cement-based materials with new pozzolanic additions in the very long term, after several hardening years, could be interesting. Here, the influence of using waste brick powder as 10% and 20% clinker substitution in microstructure and several durability-related parameters of mortars after 1500 hardening days (approximately 4 years) has been studied. According to the results obtained, the incorporation of brick powder overall improved the performance of mortars after 4 years, compared to reference mortars without addition, especially regarding the pore structure and chloride diffusion., This work was supported by the Conselleria de Educacion, Inves-tigacion, Cultura y Deporte (at present re-named as Conselleria de Innovacion, Universidades, Ciencia y Sociedad Digital) de la Generalitat Valenciana (Spain) [grant number GV/2019/070] ; and by the Agencia Nacional de Investigacion y Desarrollo de Chile (ANID) [grant number FONDECYT REGULAR 1211135]
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Effects after 1500 Hardening Days on the Microstructure and Durability-Related Parameters of Mortars Produced by the Incorporation of Waste Glass Powder as a Clinker Replacement

  • Tremiño, Rosa María
  • Letelier, Viviana
  • Branco, Fernando G.
  • Ortega, José Marcos
  • Real-Herraiz, Teresa Pilar|||0000-0003-2578-2902
[EN] One of the ways of lessening the CO2 emissions of cement industry consists of replacing clinkers with supplementary cementitious materials. The required service life of real construction elements is long, so it is useful to characterize the performance of these materials in the very long term. Here, the influence of incorporating waste glass powder as a supplementary cementitious material, regarding the microstructure and durability of mortars after 1500 hardening days (approximately 4 years), compared with reference mortars without additions, was studied. The percentages of clinker replacement by glass powder were 10% and 20%. The microstructure was studied using impedance spectroscopy and mercury intrusion porosimetry. Differential thermal and X-ray diffraction analyses were performed for assessing the pozzolanic activity of glass powder at the end of the time period studied. Water absorption after immersion, the steady-state diffusion coefficient, and length change were also determined. In view of the results obtained, the microstructure of mortars that incorporated waste glass powder was more refined compared with the reference specimens. The global solid fraction and pores volume were very similar for all of the studied series. The addition of waste glass powder reduced the chloride diffusion coefficient of the mortars, without worsening their behaviour regarding water absorption after immersion., This work was supported by the Conselleria de Educacion, Investigacion, Cultura y Deporte (presently re-named as Conselleria de Innovacion, Universidades, Ciencia y Sociedad Digital) de la Generalitat Valenciana, Spain (grant code GV/2019/070); by the Agencia Nacional de Investigacion y Desarrollo de Chile (ANID; grant number FONDECYT REGULAR 1211135); by FCT-Foundation for Science and Technology, IP, within the scope of the R&D Unit Institute for sustainability and innovation in structural engineering-ISISE (UIDP/04029/2020); and by the ERDF through the COMPETE 2020 program, Portugal 2020 (project POCI-01-0247-FEDER-033990 iNBRail).