Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 7
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Impact of ultrasound-assisted extraction and solvent composition on bioactive compounds and in vitro biological activities of thyme and rosemary

  • Munekata, E.S.
  • Alcantara, C.
  • Zugcic T.
  • Abdelkebir, R.
  • Collado, M. C.
  • Jambrk, A.R.
  • Gavahian M.
  • Barba, F.J.
  • Lorenzo, J.M
  • Garcia-Perez, J.V.|||0000-0002-9993-4246
[EN] Mediterranean herbs, specially thyme and rosemary, are important ingredients in food preparation and more recently have been studied as natural sources of bioactive compounds. This study aimed to study the effect of matrix (thyme vs. rosemary), and extraction protocol (conventional extraction vs. ultrasound assisted extraction) solvent composition (water vs. 50:50 ethanol:water solution) on the extraction of high value compounds (phenolic compounds, flavonoids and carotenoids) and also explore the antioxidant, antimicrobial (Listeria innocua, Staphylococcus aureus, and Salmonella enterica), probiotic (Lactobacillus casei and Bifidobacterium lactis), and anti-inflammatory activities. The phenolic, flavonoid and carotenoid content of extracts was greatly influenced by extraction conditions wherein the ultrasound pre-treatment improved the extraction of carotenoids but induced the opposite effect for polyphenols and flavonoids in both herbs. Only the aqueous extract of thyme obtained from ultrasound pre-treatment was the only extract that inhibited the growth of potentially pathogenic bacteria, stimulated the probiotic bacteria and achieved high anti-inflammatory and antioxidant activity. Moreover, this extract also was rich on phenolic compounds (such as p-coumaric acid 4-O-glucoside, kaempferol 3-O-rutinoside, feruloyl glucose, and 4-vinylguaiacol) and carotenoids. Therefore, ultrasound extraction of bioactive compounds with water as solvent could be explored in food and pharmaceutical applications., This work has been developed in the framework of and supported by COST Action CA15136 EUROCAROTEN. Tihana Zugcic holds an award from ERASMUS+ TRAINEESHIP program 2017/18. Radhia Abdelkebir would like to acknowledge the Republique Tunisienne, Ministere de I'Enseignement Superieur et de Ia Recherche Scientifique, Universite de Gabes for the fellowship to do a stay in the Universitat de Valencia. Moreover, Radhia Abdelkebir would like to thank COST Action CA15136 for her STSM fellowship. Tihana Zugcic, Anet Rezek Jambrak and Francisco J. Barba would like to acknowledge the Croatian Science Foundation for their financing of the project titled "High voltage discharges for green solvent extraction of bioactive compounds from Mediterranean herbs (IP-2016-06-1913)". Paulo E. S. Munekata acknowledges postdoctoral fellowship support from Ministry of Economy and Competitiveness (MINECO, Spain) "Juan de la Cierva" program (FJCI-2016-29486). Thanks to GAIN (Axencia Galega de Innovacion) for supporting this research (grant number IN607A2019/01).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Defence Spending, Institutional Environment and Economic Growth: Case of NATO

  • Utrero-González, Natalia|||0000-0001-9304-3517
  • Hromcová, Jana
  • Callado-Muñoz, Francisco J.
[EN] This paper analyses the impact of participating in a military alliance on the nexus between defence spending and economic growth. In particular, we study how the process of gradual association to a military organization influences the defence spending of newcomers, and consequently their economic growth. Conclusions from the theoretical model are tested empirically for countries in the North Atlantic Treaty Organization. Results show that the prospect of intensified military alliance partnership and membership has a positive effect on economic growth. In addition, increased security and stability gained by closer military cooperation reinforces the positive link with economic growth. Empirical evidence supports theoretical priors., Financial support from the Ministry of Education and Science through [grant number ECO2013-45395-R], [grant number ECO2013-48496-C4-4-R], [grant number ECO2015-67999-R] (MINECO/FEDER), [grant number ECO2016-76255-P]; the Regional Government of Aragón and the European Social Fund (S125 project: Compete), and the Centro Universitario de la Defensa Zaragoza through the 2016-06 project is gratefully acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Efficient update of determinants of rmany-electron wave function overlaps

  • Alonso-Jordá, Pedro|||0000-0002-6882-6592
  • Quintana-Ortí, Enrique S.|||0000-0002-5454-165X
  • Davidovic, Davor
  • Sapunar, Marin
  • Herrero, Jose R.
[EN] The calculation of overlaps between many-electron wave functions at different nuclear geometries during nonadiabatic dynamics simulations requires the evaluation of a large number of determinants of matrices that differ only in a few rows/columns. While this calculation is fast for small systems, its cost grows faster than the alternative electronic structure calculation used to obtain the wave functions. For wave functions that can be written as a CIS expansion, all determinants can be computed using the set of level-2 minors of the reference matrix. However, this is still a costly computation for large systems. In this paper, we provide an algorithm for efficiently calculating all level-2 minors of a matrix by re-utilizing and updating the LU factorization for the determinants of the minors. This approach results in a parallel version of the algorithm that is up to an order of magnitude faster then the current best parallel implementation. The algorithm thus allows the computation of exact wave function overlaps for relatively large systems, with a high density of states, at virtually no cost compared with the electronic structure calculations. Furthermore, the new algorithm opens the path to further investigations in efficient computing of the exact wave function overlaps for complex wave functions such as MR-CIS and MR-CISD. Program summary Program Title: CIS Overlap Licensing provisions: MIT Programming language: FORTRAN 2008, C Nature of problem: Calculation of overlaps between CIS type wave functions at different nuclear geometries during nonadiabatic dynamics simulation requires calculating a large number of connected determinants and scales with the seventh power of the size of the system being studied. Without additional approximations, for large systems this computation becomes more costly than the electronic structure calculation used to obtain the wave functions. Solution method: All of the determinants required for a CIS wave function overlap calculation can be derived from the set of all level-2 minors of the matrix of overlaps between the reference Slater determinants. We developed an algorithm for efficiently computing all level-2 minors of a matrix. This part of the computational process was the bottleneck in previous solutions to the problem and is now an order of magnitude faster resulting in significantly faster overall calculation of the wave function overlaps., Enrique S. Quintana-Orti was supported by project TIN2017-82972-R, Pedro Alonso-Jorda by project TIN2017-89314-P-AR, and Jose R. Herrero by project TIN2015-65316-P, all of the MINECO and FEDER. The latter was also funded by the Generalitat de Catalunya (contract 2017-SGR-1414). Marin Sapunar and Davor Davidovic were supported by Croatian Science Foundation under grant HRZZ IP-2016-06-1142.
Repositori Institucional UIB
Publicación Artículo científico (JournalArticle)

First record of Buenia, Massutii, Kovačić, Ordines, & Schliewen, 2017, in the Atlantic Ocean based on molecular andmorphological evidences

  • Ordines, Francesc
  • Ramírez Amaro, Sergio
  • Burgos, Candelaria
  • Baro, Jorge
  • Kovačić, Marcelo
  • Sobrino, Ignacio
[eng] The recently described Mediterranean goby species, Buenia massutii, was found atthe deep shelf in the Gulf of Cádiz (north-eastern Atlantic Ocean). The identificationof the specimen was performed using morphological analysis and molecular techniques;including the sequencing of the mitochondrial genes Cytochrome c Oxidase I(DNA barcode) and Cytochrome b. The sequences for Cytochrome b is presented forthe first time for B. massutii. The limited migration capability and behaviour of smallbenthic gobies, the short lifespan of Buenia species, and the oceanographic characteristicsof the Strait of Gibraltar suggest the existence of an independent Atlanticpopulation of B. massutii.
Repositori Institucional UIB
Publicación Artículo científico (JournalArticle)

Gymnesigobius medits (Teleostei: Gobiidae), a new gobiid genus and species from the western Mediterranean slope bottoms

  • Kovačić, Marcelo
  • Ordines, Francesc
  • Ramírez Amaro, Sergio
  • Schliewen, Ulrich K.
[eng] A new genus and species of goby, Gymnesigobius medits sp. nov., is described from the western Mediterranean slope bottoms at the Balearic Islands. The new goby belongs to the Gobius-lineage (Gobiinae). Examination of the single known specimen exhibits a unique combination of morphological characters which could not be fitted to any known genus. Gymnesigobius gen. nov. is morphologically distinguished from all other genera in the Gobius-lineage by the following combination of characters: chin without fold or barbels; mouth terminal with anterior tip above horizontal level of lower eye edge; predorsal area and first dorsal fin base naked; pelvic fin anterior membrane well developed; head with anterior oculoscapular and preopercular canals, posterior oculoscapular canal absent; pores of head canals enlarged, e.g. pores α and ρ larger or of about the same size as interspaces to pore β; six transverse suborbital rows of sensory papillae, four continuous suborbital rows in front of row b, fifth row divided in three parts but in front of row b, sixth row just as superior part above row b and below pore α; longitudinal suborbital row b barely reaching forward to the vertical from posterior edge of eye. A full description of the new genus and species is provided. The new species, collected at a depth of between 344 and 364 m (mean depth of 354 m), is one of very few gobiid species found at bathyal depths.
DAU Arxiu Digital de la Universitat Ramon Llull
Publicación Artículo científico (JournalArticle)

Design of a Mobile Low-Cost Sensor Network Using Urban Buses for Real-Time Ubiquitous Noise Monitoring

  • Alsina-Pagès, Rosa Ma
  • Hernández Jayo, Unai
  • Alías-Pujol, Francesc
  • Angulo, Ignacio
One of the main priorities of smart cities is improving the quality of life of their inhabitants. Traffic noise is one of the pollutant sources that causes a negative impact on the quality of life of citizens, which is gaining attention among authorities. The European Commission has promoted the Environmental Noise Directive 2002/49/EC (END) to inform citizens and to prevent the harmful effects of noise exposure. The measure of acoustic levels using noise maps is a strategic issue in the END action plan. Noise maps are typically calculated by computing the average noise during one year and updated every five years. Hence, the implementation of dynamic noise mapping systems could lead to short-term plan actions, besides helping to better understand the evolution of noise levels along time. Recently, some projects have started the monitoring of noise levels in urban areas by means of acoustic sensor networks settled in strategic locations across the city, while others have taken advantage of collaborative citizen sensing mobile applications. In this paper, we describe the design of an acoustic low-cost sensor network installed on public buses to measure the traffic noise in the city in real time. Moreover, the challenges that a ubiquitous bus acoustic measurement system entails are enumerated and discussed. Specifically, the analysis takes into account the feature extraction of the audio signal, the identification and separation of the road traffic noise from urban traffic noise, the hardware platform to measure and process the acoustic signal, the connectivity between the several nodes of the acoustic sensor network to store the data and, finally, the noise maps’ generation process. The implementation and evaluation of the proposal in a real-life scenario is left for future work
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Design of a Mobile Low-Cost Sensor Network Using Urban Buses for Real-Time Ubiquitous Noise Monitoring

  • Alsina-Pagès, Rosa Ma
  • Hernández Jayo, Unai
  • Alías-Pujol, Francesc
  • Angulo, Ignacio
One of the main priorities of smart cities is improving the quality of life of their inhabitants. Traffic noise is one of the pollutant sources that causes a negative impact on the quality of life of citizens, which is gaining attention among authorities. The European Commission has promoted the Environmental Noise Directive 2002/49/EC (END) to inform citizens and to prevent the harmful effects of noise exposure. The measure of acoustic levels using noise maps is a strategic issue in the END action plan. Noise maps are typically calculated by computing the average noise during one year and updated every five years. Hence, the implementation of dynamic noise mapping systems could lead to short-term plan actions, besides helping to better understand the evolution of noise levels along time. Recently, some projects have started the monitoring of noise levels in urban areas by means of acoustic sensor networks settled in strategic locations across the city, while others have taken advantage of collaborative citizen sensing mobile applications. In this paper, we describe the design of an acoustic low-cost sensor network installed on public buses to measure the traffic noise in the city in real time. Moreover, the challenges that a ubiquitous bus acoustic measurement system entails are enumerated and discussed. Specifically, the analysis takes into account the feature extraction of the audio signal, the identification and separation of the road traffic noise from urban traffic noise, the hardware platform to measure and process the acoustic signal, the connectivity between the several nodes of the acoustic sensor network to store the data and, finally, the noise maps’ generation process. The implementation and evaluation of the proposal in a real-life scenario is left for future work