Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 3
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

CO2 outperforms KOH as an activator for high-rate supercapacitors in aqueous electrolyte

  • Castro Gutiérrez, Jimena
  • Canevesi, Rafael L. S.
  • Emo, Mélanie
  • Izquierdo Pantoja, María Teresa
  • Celzard, Alain
  • Fierro, Vanessa
9 figures.-- © 2022. This manuscript version is made available under the CC-BY-NC-ND 4.0 license https://creativecommons.org/licenses/by-nc-nd/4.0/, Although high-surface area activated carbons used as supercapacitor (SC) electrodes are frequently produced by KOH activation, this study shows that, when aqueous electrolytes are used, CO2 activation is a better choice from the point of view of SC performance, environment and economy. Ordered mesoporous carbons (OMCs) produced by a mechanochemical synthesis method from mimosa tannin are activated with KOH to use these materials as electrodes for SCs. A comparative analysis of the same OMCs but activated with CO2 is presented to examine the effect of the activation process on materials performance. KOH-activated materials exhibit good electrochemical performance at low charging rates, reaching specific cell capacitance values of 49 F g−1 at 0.5 Ag−1, however, restricted access to microporosity and low water affinity water reduces their performance at high charging rates. In contrast, the best performing CO2-activated material can retain 81% of capacitance at 20 A g−1, compared to 25% for a KOH-activated OMC with similar properties and tested under the same conditions. A thorough review of the open literature suggests that CO2 activation would produce materials with a suitable combination of pore network connectivity and water affinity, resulting in SCs with high rate capability in an aqueous electrolyte. These conclusions were drawn by judiciously integrating the analysis of: (i) the hysteresis loop scanning of N2 adsorption-desorption isotherms; and (ii) water adsorption isotherms as tools to more accurately assess the pore network connectivity and water affinity of the materials, which are not generally considered when studying SC performance., Jimena Castro-Gutiérrez gratefully acknowledges CONACYT-SENER for the grant awarded [601021/438978] to support her PhD studies, resulting in the work presented herein. This study was partly supported by the French PIA project “Lorraine Université d’Excellence” [reference ANR-15-IDEX-04-LUE], and the TALiSMAN project, funded by ERDF [2019-000214]., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Coordinated P atoms promote bifunctional activity for ORR and HER in atomically dispersed Fe-Nx sites

  • García Dalí, Sergio
  • Quílez Bermejo, J.
  • Zitolo, Andrea
  • Canevesi, Rafael L. S.
  • Izquierdo Pantoja, María Teresa
  • Morallón, Emilia
  • Cazorla Amorós, Diego
  • Celzard, Alain
  • Fierro, Vanessa
5 figures., In this study, we report the design and synthesis of a bifunctional Fe-N-P@TDC electrocatalyst derived from renewable precursors, tannin and phytic acid. The catalyst was prepared through a mechanochemical reaction of these precursors with urea and FeCl3 as nitrogen (N) and iron (Fe) precursors, respectively, followed by simple pyrolysis at 900°C. The innovative integration of phosphorus (P) atoms coordinated to Fe-Nx single-atom sites creates a unique electronic environment that enhances catalytic activity for both ORR and HER. Density Functional Theory (DFT) calculations reveal that FeN2P2 and FeNP3 configurations are the most active sites, showing synergistic effects of P coordination in weakening intermediate adsorption energies and promoting reaction kinetics. The Fe-N-P@TDC catalyst exhibits superior bifunctional activity, with ORR half-wave potentials and HER overpotentials comparable to commercial Pt/C, but at a fraction of the cost and higher stability. This work demonstrates that fine-tuning of Fe-Nx coordination with P atoms in sustainable carbon matrices offers a viable route toward efficient, durable, and low-cost electrocatalysts for clean energy conversion., This study was partly supported by the French PIA project “Lorraine Université d'Excellence,” reference ANR-15-IDEX-04-LUE, and the TALiSMAN project funded by ERDF (2019-000214). SGD thanks the Ministerio de Universidades, the European Union, and the University of Oviedo for the financial support (MU-21-UP2021-030 30267158). JQB thanks the Ministerio de Universidades, the European Union, and the University of Alicante for the financial support (MARSALAS21-21)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Tuning surface phosphorus chemistry in metal-free carbon electrocatalysts for enhanced hydrogen evolution

  • García Dalí, Sergio
  • Quílez Bermejo, J.
  • Diatlov, Denis
  • Marchal, Wouter
  • Derveaux, Elien
  • Castro Gutiérrez, Jimena
  • Izquierdo Pantoja, María Teresa
  • Blancafort, Lluís
  • Celzard, Alain
  • Fierro, Vanessa
7 figures, 1 table., The precise modulation of phosphorus species and physicochemical properties in metal-free carbon materials holds significant potential for enhancing their electrocatalytic performance in the hydrogen evolution reaction (HER). In this study, we precisely tune the phosphorus species during the pyrolysis of phytic acid (PA). Pluronic® F127 acts as a protective agent, preventing the close proximity of phosphorus groups in PA molecules during pyrolysis. This interaction inhibits the formation of polyphosphoric groups during carbonization and leads instead to isolated P functionalities embedded in carbon basal planes. Comprehensive characterization, including cross-polarization magic angle spinning solid-state 31P NMR, XPS, and DFT simulations identified the phosphorus species and elucidated their structural and electronic properties. The precise tuning of phosphorous functional groups enabled by Pluronic® F127 in metal-free carbon materials boosting the phosphorous based state-of-the-art HER catalytic performance. These findings underscore the underexplored potential of surfactants beyond morphological templating, offering a powerful strategy for tailoring surface chemistry and advancing the design of next-generation metal-free electrocatalysts., This study was partly supported by the French PIA project “Lorraine Université d’Excellence”, reference ANR-15-IDEX-04-LUE, and the TALiSMAN project funded by ERDF (2019-000214). SGD thanks the Ministerio de Universidades, the European Union and the University of Oviedo for their financial support (MU-21-UP2021-030 30267158). L. B. and D. D. acknowledge financial support by projects PID2022-138062NB-I00 and PRE2020-093504 from Ministerio de Ciencia e Innovación, Spain, and computational time from Red Española de Supercomputación, project QHS-2024-1-0031, and Consorci de Serveis Universitaris de Catalunya., Peer reviewed