Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 7
Encontrada(s) 1 página(s)

Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Travel Time Estimation for Optimal Planning in Internal Transportation

  • Das, Pragna
  • Ribas-Xirgo, Lluís|||0000-0003-1419-0485
Optimal planning depends on precise and exact estimation of the operation costs of mobile robots. Unfortunately, determining the current and future state of a vehicle implies identifying all the parameters in its model. Rather than broadening the number of factors, in this work we adopt the approach of using a higher-level abstraction model to identify only a few cost parameters. Based on the observation that arc travel times accurately reflect the effect of physical states, this work proposes using them as the key parameters to compute accurate path traversal costs in the context of indoor transportation. This approach eliminates the need to model all factors in order to derive the cost for every robot. The resulting model organizes those parameters in a bilinear state-space form and includes the evolution of actual travel times with changing states. We show that the proposed model accurately estimates arc travel times with respect to actual observations gathered from real robots traversing a few arcs of a traffic network until battery exhaustion. We experimentally obtained minimum-cost paths from random origin and destination nodes when using heuristics and the "closer-to-reality" (bilinear-state version of our model) path costs, finding that it can save an average of 15% in transportation time compared to conventional methods.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Punxa, A Python-Based RISC-V System Simulator for Education

  • Castells-Rufas, David|||0000-0002-7181-9705
  • Novo, David|||0000-0002-5510-4152
  • Martorell, Xavier|||0000-0002-0417-3430
The analysis and verification of the integration of hardware and software components is challenging. Traditional HDL simulators, which are often slow and provide low-level analysis tools, are not always effective for simulating the software of processor-based systems. This work presents an interactive co-simulation framework that enhances students' understanding of computer architecture concepts typically obscured by hardware intricacies. This framework facilitates a unified environment for iterative design, enabling detailed analysis and generation of reports and traces to identify system performance, bottlenecks, and find implementation errors. By prioritizing analysis features over performance, this framework serves as a valuable tool for educational purposes and comprehensive examination of the interactions between hardware and software.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Dual-Gate Organic Thin-Film Transistor and Multiplexer Chips for the Next Generation of Flexible EG-ISFET Sensor Chips

  • Rezaee, Ashkan
  • Carrabina Bordoll, Jordi|||0000-0002-9540-8759
Ion-sensitive field-effect transistors (ISFETs) are used as elementary devices to build many types of chemical sensors and biosensors. Organic thin-film transistor (OTFT) ISFETs use either small molecules or polymers as semiconductors together with an additive manufacturing process of much lower cost than standard silicon sensors and have the additional advantage of being environmentally friendly. OTFT ISFETs' drawbacks include limited sensitivity and higher variability. In this paper, we propose a novel design technique for integrating extended-gate OTFT ISFETs (OTFT EG-ISFETs) together with dual-gate OTFT multiplexers (MUXs) made in the same process. The achieved results show that our OTFT ISFET sensors are of the state of the art of the literature. Our microsystem architecture enables switching between the different ISFETs implemented in the chip. In the case of sensors with the same gain, we have a fault-tolerant architecture since we are able to replace the faulty sensor with a fault-free one on the chip. For a chip including sensors with different gains, an external processor can select the sensor with the required sensitivity.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

RisCO2, Implementation and Performance Evaluation of RISC-V Processors for Low-Power CO Concentration Sensing

  • Núñez Prieto, Ricardo|||0000-0002-6294-1928
  • Castells-Rufas, David|||0000-0002-7181-9705
  • Terés Terés, Lluís|||0000-0002-9263-411X
In the field of embedded systems, energy efficiency is a critical requirement, particularly for battery-powered devices. RISC-V processors have gained popularity due to their flexibility and open-source nature, making them an attractive choice for embedded applications. However, not all RISC-V processors are equally energy-efficient, and evaluating their performance in specific use cases is essential. This paper presents RisCO2, an RISC-V implementation optimized for energy efficiency. It evaluates its performance compared to other RISC-V processors in terms of resource utilization and energy consumption in a signal processing application for nondispersive infrared (NDIR) CO sensors.The processors were implemented in the PULPino SoC and synthesized using Vivado IDE. RisCO2 is based on the RV32E_Zfinx instruction set and was designed from scratch by the authors specifically for low-power signal demodulation in CO NDIR sensors. The other processors are Ri5cy, Micro-riscy, and Zero-riscy, developed by the PULP team, and CV32E40P (derived from Ri5cy) from the OpenHW Group, all of them widely used in the RISC-V community. Our experiments showed that RisCO2 had the lowest energy consumption among the five processors, with a 53.5% reduction in energy consumption compared to CV32E40P and a 94.8% reduction compared to Micro-riscy. Additionally, RisCO2 had the lowest FPGA resource utilization compared to the best-performing processors, CV32E40P and Ri5cy, with a 46.1% and a 59% reduction in LUTs, respectively. Our findings suggest that RisCO2 is a highly energy-efficient RISC-V processor for NDIR CO sensors that require signal demodulation to enhance the accuracy of the measurements. The results also highlight the importance of evaluating processors in specific use cases to identify the most energy-efficient option. This paper provides valuable insights for designers of energy-efficient embedded systems using RISC-V processors.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

EEG Dataset Collection for Mental Workload Predictions in Flight-Deck Environment

  • Hernández-Sabaté, Aura|||0000-0003-1563-9934
  • Yauri Vidalón, José Elías|||0000-0001-6287-7797
  • Folch, Pau
  • Álvarez, Daniel
  • Gil, Debora|||0000-0002-2770-4767
High mental workload reduces human performance and the ability to correctly carry out complex tasks. In particular, aircraft pilots enduring high mental workloads are at high risk of failure, even with catastrophic outcomes. Despite progress, there is still a lack of knowledge about the interrelationship between mental workload and brain functionality, and there is still limited data on flight-deck scenarios. Although recent emerging deep-learning (DL) methods using physiological data have presented new ways to find new physiological markers to detect and assess cognitive states, they demand large amounts of properly annotated datasets to achieve good performance. We present a new dataset of electroencephalogram (EEG) recordings specifically collected for the recognition of different levels of mental workload. The data were recorded from three experiments, where participants were induced to different levels of workload through tasks of increasing cognition demand. The first involved playing the N-back test, which combines memory recall with arithmetical skills. The second was playing Heat-the-Chair, a serious game specifically designed to emphasize and monitor subjects under controlled concurrent tasks. The third was flying in an Airbus320 simulator and solving several critical situations. The design of the dataset has been validated on three different levels: (1) correlation of the theoretical difficulty of each scenario to the self-perceived difficulty and performance of subjects; (2) significant difference in EEG temporal patterns across the theoretical difficulties and (3) usefulness for the training and evaluation of AI models.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Technoeconomic Analysis for Deployment of Gait-Oriented Wearable Medical Internet-of-Things Platform in Catalonia

  • Codina Barberà, Marc|||0000-0002-8989-587X
  • Castells-Rufas, David|||0000-0002-7181-9705
  • Torrelles Pijuan, Ma Jesús|||0000-0002-2212-6064
  • Carrabina Bordoll, Jordi|||0000-0002-9540-8759
The Internet of Medical Things (IoMT) extends the concept of eHealth and mHealth for patients with continuous monitoring requirements. This research concentrates on the use of wearable devices based on the use of inertial measurement units (IMUs) that account for a gait analysis for its use in three health cases, equilibrium evaluation, fall prevention and surgery recovery, that impact a large elderly population. We also analyze two different scenarios for data capture: supervised by clinicians and unsupervised during activities of daily life (ADLs). The continuous monitoring of patients produces large amounts of data that are analyzed in specific IoMT platforms that must be connected to the health system platforms containing the health records of the patients. The aim of this study is to evaluate the factors that impact the cost of the deployment of such an IoMT solution. We use population data from Catalonia together with an IoMT deployment model for costs from the current deployment of connected devices for monitoring diabetic patients. Our study reveals the critical dependencies of the proposed IoMT platforms: from the devices and cloud cost, the size of the population using these services and the savings from the current model under key parameters such as fall reduction or rehabilitation duration. Future research should investigate the benefit of continuous monitoring in improving the quality of life of patients.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

High-Resolution Ultrasound Platform for Infant Meningitis Detection, An In Vitro Demonstration

  • Navarrete Hernandez, Manuel|||0000-0003-4441-7935
  • Castells-Rufas, David|||0000-0002-7181-9705
  • Kichou, Hassane Baghdad
  • Navarro-Patron, Guillermo|||0000-0002-9776-5231
  • Jimenez, Javier
  • Carrabina Bordoll, Jordi|||0000-0002-9540-8759
Infant meningitis remains a severe burden on global health, particularly for young infants. Traditional ultrasound imaging techniques are limited in spatial resolution to visualize white blood cells (WBCs) in the cerebrospinal fluid (CSF), which is considered a well-established marker for meningitis detection. This work presents a novel platform that uses high-resolution ultrasound to detect the backscatter signals from microscopic CSF WBCs through the anterior fontanelle of neonates and young infants. The whole system was built around a custom probe that allows for a 20 MHz focused transducer to be mechanically controlled to map the area of interest in the CSF. Data processing can be performed internally in the device without the need to extract the images for further analysis. The in vitro feasibility of the proposed solution was evaluated in imaging 7 m particle suspensions at different concentrations relevant to meningitis diagnosis ranging from 7- to 646-particles (pp)/L. The experimental tests were conducted from a simple setup using a sample container to a more realistic setup based on an anatomical phantom of the neonatal head. The results show high-quality images, where 7 m particles can be resolved for the different concentrations.