Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 5
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

An early example of glaze technology diffusion in North Africa: The Islamic workshop of Tahert (central Maghreb, Algeria)

  • Djellid, Akila
  • Pradell, Trinitat
  • Salinas Pleguezuelo, Elena
[EN] A small group of ceramics from the archaeological excavations at Tahert (Algeria), the seat of the Rustamid dynasty in the 9th-early 10th centuries, has been studied for the first time by OM, SEM-EDS and micro X-ray diffraction. The ceramics belong to the earliest glazed pottery workshop found in North Africa, as other earlier or contemporary workshops in Tunisia and Egypt have not yet been found. The analysis made it possible to characterise the production of polychrome transparent lead-glazed wares, to distinguish it from other glaze workshops, and to trace links with other glaze workshops of Dar al-Islam, such as those producing ‘Raqqada Yellow’ ware. Furthermore, the polychrome glaze production of Tahert is a clear example of how migrating potters, although using the same technique, adapted to the raw materials and geographical conditions of the new area., This work was financially supported by Ministerio de Ciencia e Innovación (Spain, PID2022-137783OB-I00, PID2021-124325OA-I00 and PID2019–105823RB-I00), Generalitat de Catalunya (2021 SGR 00343), Junta de Andalucía (PROYEXCEL_00990) and CNRPAH (Algeria, “History of ceramic techniques between present and past. The example of ceramics from the Middle Ages and rural pottery from Algeria” CNRPAH-2021-26). μSR-XRD experiments were performed at BL04-MSPD beamline at ALBA Synchrotron in collaboration with its staff., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

The secret is quartz: technology of production of an eleventh-twelfth century western Mediterranean polychrome glazed ware

  • Salinas Pleguezuelo, Elena
  • Pradell, Trinitat
A group of a well-known polychrome glazed ceramic, widespread in the western Mediterranean in the eleventh and first half of the twelfth centuries, has been analysed for the first time using Optical Microscopy (OM) and a Field Emission Scanning Electron Microscopy (FE-SEM) with Energy-Dispersive X-ray Spectroscopy (EDS), in order to shed some light on the materials, production technology and provenance, about which there are various hypotheses. This ware is characterised by a perfectly drawn and varied iconography, with often stylised zoomorphic and anthropomorphic and nautical motifs. It was produced in an as yet unidentified workshop in North Africa or the Iberian Peninsula. The pottery analysed was found in an archaeological excavation in the Barrio Andalusi of Almería (south-east of Spain). Technologically, the ceramics are fairly homogeneous, with copper-green and manganese-brown pigments applied over the raw tin glaze filled with large undissolved quartz particles. The use of quartz is consistent with a Fatimid-Zirid contribution from Ifriqiya, the use of tin is consistent with an Andalusi Umayyad-Taifas contribution, and the green and brown colours on a white ground to either Ifriqiya or Andalusi. Our study has shown that the use of quartz on the decorated glazed surface is not related to the need for an opacifier, but rather to the need for a highly viscous melt that limits the spread of the pigments during the firing allowing a finer and more detailed drawing. This fusion of different techniques has been identified for the first time. It is intriguing from the historical point of view of medieval technology, and provides the first insights into understanding the technological transfers and technical solutions that took place in the Mediterranean basin during this period., Ministerio de Ciencia e Innovación (España) PID2022-137783OB-I00 PID2021-124325OA-I00 CNS2023-145440 MCIN/AEI/10.13039/5011000011033 CEX2023-001300 Generalitat de Catalunya 2021 SGR 00343 Junta de Andalucía PROYEXCEL_00990, Peer reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Shedding light on the formation mechanisms of Islamic polychrome lusters: a Cu, Fe, Ag micro XANES study

  • Sadurní Codina, Ruth
  • Molera Marimon, Judit
  • Hole, Clement
  • Juanhuix, Judith
  • Suarez Orduz, Hugo Alexander
  • Cotte, Marine
  • Pradell Cara, Trinitat
Islamic luster is a ceramic glaze decoration exploiting the quantum- confined optical response of noble metallic nanoparticles to produce a colorful metallic and iridescent appearance. Upon firing, silver and copper initially present in an overpaint diffuse into the glaze and are reduced to Ag0 and Cu0 nanoparticles. This study examines the relationship between luster colors and paint composition. The six analyzed shards are 9th century Abbasid polychrome lusters exhibiting green, red, ochre, and brown colors. Key chemical factors are revealed by imaging 16 luster cross sections with different micro- and nanoanalytical methods, including UV- Vis spectroscopy, Ag L3- , Cu- , and Fe K- edge micro x- ray absorption spectroscopy (μ- XAS), micro x- ray diffraction (μ- XRD), and field emission scanning electron microscopy (FIB- FE- SEM). These factors connect together (i) the Cu/Ag ratio; (ii) the Cu, Ag, and Fe speciation; (iii) the nature, size, and concentration of metallic nanoparticles; and (iv) the luster color. Notably, the Cu/Ag ratio balances the competitive reactions between Ag+ reduction and Cu+ disproportionation., We are grateful to the Ashmolean Museum (Oxford) for providing the samples of historical lusterware. Acknowledgments are given to e. Pineda and B.- J. Baas for the help with the XAS experiment, to h. castillo- Michel and M. Salomé for developing id21 instruments, and to d. crespo for providing the code for the Fe K- edge pre- edge fitting. Funding: this work was supported by the Ministerio de ciencia e innovación (Spain) research project nos. Pid2022- 137783OB- i00 (to t.P., R.S., and J.M.) and “Maria de Maeztu” (ceX2023- 001300- M, 10.13039/501100011033) (to t.P. and R.S.) and the Generalitat de catalunya research project 2021SGR- 00343 (to t.P. and R.S.). the μ- XRd experiments were performed at Bl13 XAlOc Beamline at AlBA Synchrotron Facility with the collaboration of Alba Staff project numbers 2023087681, 2024098586, and 20250370411 (to t.P., R.S., and J.J.). the μ- XAS experiments were performed at beamline id- 21 at the european Synchrotron Radiation Facility (eSRF) project numbers MA6420, hG224, ihhG58, Blc16391, and Blc16477 (to t.P., R.S., c.h., AS, and M.c.), Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Probing the dynamic heterogeneity of an amorphous alloy from the perspective of stress relaxation

  • Ning, Li Xi
  • Hao, Qi
  • Zhang, Langting
  • Wang, Y. J.
  • Pineda Soler, Eloi
  • Park, Eun Soo
  • Qiao, Jichao
This version of the article has been accepted for publication, after peer review (when applicable) and is subject to Springer Nature’s AM terms of use, but is not the Version of Record and does not reflect post-acceptance improvements, or any corrections. The Version of Record is available online at: https://doi.org/10.1007/s10338-026-00715-y, Stress relaxation experiments on a Zr50Cu34Ag8Al8 amorphous alloy reveal that its dynamic heterogeneity is captured by a Kohlrausch–Williams–Watts stretched exponential function, demonstrating a non-Gaussian, asymmetric relaxation spectrum. The analysis based on the generalized Maxwell model revealed that the relaxation process is accelerated at high temperatures, indicating that increasing temperature makes more deformation units and promotes the formation of “liquid-like” zones. ßkww exhibits a non-monotonous trend with temperature due to the combined effects of temperature and structural relaxation. Physical aging improves structural stability by shifting the activation energy distribution toward higher values for increasing aging times. This results in a system energetic state closer to equilibrium, lowering the overall energy level and suppressing the relaxation process. Notably, it is found that the dynamic heterogeneity does not decrease but instead increases with aging. These findings provide significant insights into the structural origins of the viscoelastic behavior of amorphous alloys., This work is supported by the NSFC (Grant Nos.52271153 and 12472069), the Natural Science Basic Research Plan for Distinguished Young Scholars in Shaanxi Province (Grant No. 2021JC-12), the Natural Science Foundation of Shaanxi Province (Grant No. 2025GH-YBXM-046), and the Fundamental Research Funds for the Central Universities. YJW was financially supported by NSFC (Grant No. 12472112) and the Strategic Priority Research Program of the Chinese Academy of Sciences (Grants No. XDB0620103 and No. XDB0510301). YY acknowledges financial support from the Research Grant Council (RGC), the Hong Kong government through the General Research Fund (GRF) with the grant numbers CityU11200719 and CityU11213118. EP acknowledges financial support by grant PID2023-146623NB-I00 funded by MICIU/AEI/10.13039/501100011033, the Maria de Maeztu Units of Excellence Programme grant CEX2023-001300-M funded by MICIU/AEI/10.13039/501100011033, and grant 2021-SGR-00343 funded by AGAUR-Generalitat de Catalunya. ESP was supported by the Creative Materials Discovery Program through the National Research Foundation of Korea (NRF) funded by the Ministry of Science and ICT (No. NRF-2019M3D1A1079215). X.L.Ning is sponsored by the Cultivation of Master’s Degree Graduate Students’ Practical Innovation Ability Fund of Northwestern Polytechnical University (No. PF2025055)., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Influence of configurational entropy on the corrosion resistance of Pd-based metallic glasses

  • Zhou, Yating
  • Bruna Escuer, Pere
  • Kato, Hidemi
  • Wada, Takeshi
  • Qiao, Jichao
The corrosion resistance behavior of High-Entropy Metallic Glasses (HE-MGs) has received extensive attention and research due to its wide range of engineering applications. However, research on the relationship between high-entropy properties and corrosion properties is limited, leaving uncertainty about how configurational entropy and high-entropy characteristics affect the corrosion resistance of materials. In this paper, the corrosion behavior of three typical Pd-based Metallic Glasses (MGs) with different entropy values in 0.5 M H2SO4 was investigated. The results show that the self-corrosion current density of Pd-based HE-MG is about 0.3% of that of ternary Pd-based MG with a smaller configurational entropy, which is a large improvement in the corrosion resistance. XPS studies show that the content of Pd in Pd-based HE-MG is only 50% of other Pd-based MGs, but it has the highest increment of Pd oxide after corrosion. The oxide films formed in ternary and quaternary Pd-based MGs are unstable while the Pd-based HE-MG forms a highly stable oxide film that is not prone to dissolution. Moreover, the binding energy was used to directly correlate the corrosion resistance of the material with the stability of the material itself and the surface films. These findings provide a new perspective for subsequent research on regulating the corrosion resistance of MGs through configurational entropy control of high-entropy characteristics., P. Bruna and Y. Zhou acknowledge financial support from Grant PID2023-146623NB-I00 funded by MICIU/AEI/10.13039/501100011033/FEDER/UE and by Generalitat de Catalunya AGAUR grant 2021-SGR-00343. This work is part of Maria de Maeztu Units of Excellence Programme CEX2023–001300-M funded by MCIN/AEI/10.13039/501100011033. Y. Zhou is sponsored by China Scholarship Council (CSC) under Grant No. 202407010007., Peer Reviewed, Postprint (published version)