Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 3
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A recent eulerian langrarian CFD methodology for modeling direct injection diesel sprays

  • Desantes J.M.|||0000-0002-4124-9393
  • Hoyas, Sergio|||0000-0002-8458-7288
  • Gil, A.|||0000-0001-7192-6992
  • Khuong, Anh Dung
  • Ravet, Frederic
[EN] The global objective of this work is to show the capabilities of the Eulerian Lagrangian spray atomization (ELSA) model for the simulation of Diesel sprays in cold starting con- ditions. Our main topic is to focus in the analysis of spray formation and its evolution ◦at low temperature 255 K (−18 C) and nonevaporative conditions. Spray behavior and several macroscopic properties, included the liquid spray penetration, and cone angle are also characterized. This study has been carried out using different ambient temper- ature and chamber pressure conditions. Additionally, the variations of several technical quantities, as the area coefficient and effective diameter are also studied. The results are compared with the latest experimental results in this field obtained in our institute. In the meantime, we also compare with the normal ambient temperature at 298 K (25◦ C) where the numerical validation of the model has shown a good agreement., In this article, KAD did all the simulations, analyze the results coming from them, and wrote the first version of the manuscript under the direct supervision of SH. JMD, AG and FR gave continuous advice during the work and collaborated in the final form of the manuscript. This work was supported in part by the Spanish Government in the frame of the Project `Metodos LES para la simulacion de chorros multifasicos, Ref. ENE2010-18542 and by Renault. Dung Khuong-Anh has been supported in part by the VECOM (Vehicle Concept Modeling), EU FP7 Marie Curie Initial Training Network (ITN) Grant Agreement 213543 and in conjunction with Renault SA, France.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Evaluation of the Eulerian Lagrangian Spray Atomization (ELSA) model in spray simulations: 2D cases

  • Hoyas, Sergio|||0000-0002-8458-7288
  • Gil, A.|||0000-0001-7192-6992
  • Margot , Xandra|||0000-0002-2639-0444
  • Khuong-Anh, Dung
  • Ravet, Frederic
[EN] The aim of this paper is the evaluation and validation of the Eulerian-Lagrangian Spray Atomization (ELSA) model implemented in a CFD code by Renault. ELSA is an integrated model for capturing the whole spray evolution, in particular including primary break-up and secondary atomization. Two-dimensional simulations have been performed during the study, which is in fact enough to capture some of the main features of the spray, such as the spray penetration and the axial velocity. A mesh independence study has also been carried out in order to characterize the lowest mesh size that can be used to correctly characterize the spray. Furthermore, the two-equation k-epsilon turbulence model has been adjusted by changing some of the parameters of the dissipation rate transport equation in order to accurately characterize the spray. Finally some analyses of the results obtained, in terms of penetration, liquid mass fraction and droplet number and size, are presented in the last section of the paper. (C) 2011 Elsevier Ltd. All rights reserved., This work was supported by Renault and VECOM (Vehicle Concept Modeling) EU FP7, under the Marie Curie Initial Training Network (ITN) Grant Agreement 213543. The authors also acknowledge the support of the Generalitat Valenciana, under the contract GV/2010/039.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Evaluation of the Eulerian-Lagrangian spray atomisation (ELSA) in spray simulations

  • Hoyas, Sergio|||0000-0002-8458-7288
  • Pastor Enguídanos, José Manuel|||0000-0003-4458-0353
  • Khuong ., Anh Dung
  • Mompó Laborda, Juan Manuel
  • Ravet, Frederic
[EN] Many approaches have been used to simulate the spray structure especially in modelling fuel sprays, i.e., Eulerian, Lagrangian, Lagrangian- Eulerian, Eulerian-Eulerian and Eulerian-Lagrangian approaches. The present study uses an Eulerian-Lagrangian spray atomisation (ELSA) method which is an integrated model for capturing the whole spray evolution starting directly from injector nozzle still the end. Our goal in this study is to evaluate the ELSA model which is implementing into the commercial software Star-CD, for numerical modelling of diesel sprays. There are two key studies in these validations, at first we examine the turbulent parameters through the three different scenarios and then we study mesh dependency. The results show in form of liquid penetrations, droplet velocity, and axial velocity profiles. All numerical results are compared with experimental data from our research institute, CMT-Motores Térmicos. Copyright © 2011 Inderscience Enterprises Ltd., This work has been granted by Renault and vehicle concept modelling (VECOM) – EU FP7 Marie Curie Initial Training Network (ITN) Grant Agreement 213543 (from 1 October 2008 to 30 September 2012). The aim of the proposed training network is to provide dedicated research training in the emerging field of vehicle concept modelling for up-front pre-CAD functional performance engineering, bridging between industry and academia across Europe.