Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 3
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Bifunctional Pt-Ir nanoparticle catalysts for oxygen reduction and evolution reactions: investigating the influence of surface composition on the catalytic properties

  • Blanco Redondo, Lucinda
  • Lobko, Yevheniia
  • Veltruská, Katerina
  • Nováková, Jaroslava
  • Mazur, Michal
  • Hrbek, Tomás
  • Dopita, Milan
  • Hranícek, Jakub
  • Yakovlev, Yurii
  • Matolínová, Iva
  • Matolín, Vladimír
  • Darabut, Alina Madalina|||0000-0002-1595-6094
[EN] Unitized regenerative fuel cells (URFCs) can provide renewable, clean energy and hydrogen but require efficient bifunctional catalysts for oxygen reduction (ORR) and evolution reactions (OER). In this study, we present iridium-decorated platinum nanoparticles with three different compositions, Ir10/Pt90, Ir20/Pt80, and Ir40/Pt60. The nanoparticles' morphology and chemical structure were analysed before and after electrochemical activation to determine the optimal composition of the catalyst with the highest efficiency towards ORR and OER. Ir40/Pt60 showed the highest mass activity towards OER of 571.4 mA mgIr-1 at 1.525 VRHE, which was 1.5 times higher compared to commercial Ir black with 371.1 mA mgIr-1. In addition, the mass activity for ORR exhibited a positive correlation with the total of surface Pt active sites but decreased with the coverage of Pt nanoparticles by decorating Ir nanoparticles. Among the studied bimetallic nanoparticles, Ir20/Pt80 exhibited the highest efficiency at 57.7% and was considered the most promising URFC catalyst., The authors acknowledge financial support from grant no. 22-03643S of the Czech Science Foundation, OP VVV project "PaC NG", No. CZ.02.1.01/0.0/0.0/16_025/0007414 of the Ministry of Education, Youth and Sports of the Czech Republic, and grant No. START/SCI/153 of the Charles University. M.M. would like to acknowledge the OP VVV "Excellent Research Teams", project No. CZ.02.1.01/0.0/0.0/15_003/0000417 - CUCAM.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A small angle X-ray scattering approach for investigating fuel cell catalyst degradation for both ex situ and in operando analyses

  • Bogar, Marco
  • Yakovlev, Yurii
  • Nováková, Jaroslava
  • Kriechbaum, Manfred
  • Amenitsch, Heinz
  • Taccani, Rodolfo
  • Matolínová, Iva
  • Darabut, Alina Madalina|||0000-0002-1595-6094
[EN] Detailed multi-technique characterization of catalyst layer degradation is fundamental for improving catalyst stability and performances in Proton Exchange Membrane Fuel Cells (PEMFCs), and Small Angle X -Ray Scattering (SAXS) coupled to chemical and/or electrochemical analysis can provide important insights of processes involved in catalyst coarsening. In this extent, we present an approach to SAXS analysis able to describe all of the layers composing the Membrane Electrode Assembly (MEA): electrolyte, catalyst support, catalyst nanoparticles, and gas diffusion layers. This approach was used to compare morphological evolution of small clusters formed by catalyst nanoparticles in pristine and aged MEAs in both ex situ and in operando conditions, on a standard SAXS beamline, without exploiting the advantages of anomalous SAXS. Twin MEAs were aged with two different types of Accelerated Stress Tests (AST): one addressed to the catalyst support (s-AST) and one targeting the catalyst layer (c-AST). Limited growth of catalyst nanoparticle size was found when running s-AST, while remarkable evolution was revealed once applying c-AST. Such a difference was mainly reconducted to the disconnection of catalyst nanoparticles from the electrical paths, as supported by analysis of specific Electrochemically Active Surface Area (ECSA). In both cases, the small clusters were found becoming more compact after AST were run., All of the authors acknowledge the CERIC-ERIC Consortium for the access to experimental facilities and the financial support. The work was financially supported the Czech Science Foundation, project No. 22-03643S. Y. Y., J. N., A. M. D., and I. M. acknowledge the structural fund project PaC-NG No. CZ.02.1.01/0.0/0.0/16_025/0007414 and financial support and are grateful for the partial financial support provided by the Czech Ministry of Education, Youth and Sports (project LM2018116) . M.B. and R.T. acknowledge the financial support from the project sHYpS (sustainable HYdrogen powered Shipping, Horizon Europe call Horizon-CL5-2021-D5-01) and the Italian Operative Program for Research and Innovation 2014-2020 provided by the Italian Ministry of University and Research.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Investigation of fuel cell behavior with different catalyst loadings at varying humidities and temperatures

  • Yakovlev, Yurii
  • Lobko, Yevheniia V.
  • Gamon Rodriguez, Miquel
  • Blanco Redondo, Lucinda
  • Kalabis, David
  • Matolínová, Iva
  • Darabut, Alina Madalina|||0000-0002-1595-6094
[EN] Proton exchange membrane fuel cells (PEMFCs) suffer from severe performance losses under low-humidity conditions, which limits their deployment in portable and open-cathode systems without external humidifiers. In this study, we systematically investigate the combined effects of platinum (Pt) loading (0.2¿1.0 mgPt cm¿2), ionomer-to-carbon (I/C) ratio (0.6 and 0.8), and operating conditions (0¿100 % RH, 40¿70 °C) using commercial catalyst materials. We find that performance does not peak at full humidification but instead at intermediate RH values (50¿75 %), with the optimum shifting lower as Pt loading increases. An intermediate loading (0.4 mgPt cm¿2) maximizes performance by balancing ORR kinetics, proton resistance, and water management. Increasing I/C ratio to 0.8 impairs performance under high humidity but substantially improves both water retention and durability under dry conditions by slowing electrochemically active surface area loss. These results establish clear design principles linking catalyst layer composition to operating environment, providing guidelines for reliable PEMFC operation in practical low-humidity applications such as UAVs and portable devices., The work was financially supported the Czech Science Foundation, project No. 22-03643S, structural fund project PaC-NG No. CZ.02.1.01/0.0/0.0/16_025/0007414 and The Energy Conversion and Storage , funded as project No. CZ.02.01.01/00/22_008/0004617 by Programme Johannes Amos Comenius, call Excellent Research.