Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 4
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Towards Upscaling of La5.5WO11.25-delta Manufacture for Plasma Spraying-Thin Film Coated Hydrogen Permeable Membranes

  • Escolástico Rozalén, Sonia|||0000-0002-7097-2425
  • Serra Alfaro, José Manuel|||0000-0002-1515-1106
  • Solis Díaz, Cecilia
  • Comite, Antonio
  • Azzurri, Fiorenza
  • Gindrat, Marco
  • Moser, Stefan
  • Rauch, Johannes
  • Szyndelman, Gregory
  • Damani, Rajiv
[EN] Lanthanum tungstate (La6WO12) is a promising material for the development of hydrogen separation membranes, proton ceramic electrolyzer cells and protonic ceramic fuel cells due to its interesting transport properties and stability under different operation conditions. In order to improve the hydrogen transport through the La6WO12 membranes, thin membranes should be manufactured. This work is based on the industrial production of La5.5WO11.25-delta (LWO) powder by spray drying and the manufacturing of thin membranes by low-pressure plasma spraying (LPPS-TF) technique. LPPS-TF allows the production of dense thin films of high quality in an industrial scale. The powders produced by spray drying were morphological and electrochemically characterized. Hydrogen permeation fluxes of a membrane manufactured with these powders were evaluated and fluxes are similar to those reported previously for LWO powder produced in the lab scale. Finally, the transport properties of LWO thin films deposited on Al2O3 indicate that LPPS-TF produces high-quality LWO films with potential for integration in different applications., This work was financially supported by the European Union (DEMOYS Project, FP7/2007-2013-Grant Agreement 241309) and the Spanish Government (RTI2018-102161, SEV-2016-0683 and IJCI-2016-28330 grants).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Controlling the stress state of La1-xSrxCoyFe1 (-) O-y(3-delta) oxygen transport membranes on porous metallic supports deposited by plasma spray-physical vapor process

  • Marcano, Diana
  • Mauer, Georg
  • Sohn, Y. J.
  • Vaßen, Robert
  • García-Fayos, Julio
  • Serra Alfaro, José Manuel|||0000-0002-1515-1106
[EN] La0.58Sr0.4Co0.2Fe0.8O3-delta (LSCF), deposited on a metallic porous support by plasma spray -physical vapor deposition (PS-PVD) is a promising candidate for oxygen -permeation membranes. However, after O-2 permeation tests, membranes show vertical cracks leading to leakage during the tests. In the present work, one important feature leading to crack formation was identified. More specifically; membrane residual stress changes during thermal loading were found to be related to a phase transformation in the support. In order to improve the performance of the membranes, the metallic support was optimized by applying an appropriate heat treatment. The observed oxygen fluxes during permeation tests had infinite selectivity and were amongst the highest fluxes ever measured for LSCF membranes in the thickness range of 30 mu m, supported by LSCF porous substrates. (C) 2016 Elsevier B.V. All rights reserved., The authors gratefully acknowledge Mr. Ralf Laufs for his help with the use of the PS-PVD facility, the preparation of the SEM and EDS investigations by Dr. Doris Sebold and Mr. P. Terberger for calculations and discussion of Thermocalc phase diagrams (Forschungszentrum Julich, IEK-1). The work on membranes by PS-PVD was part of the DEMOYS Project funded from the European Community's Seventh Framework Program, FP7/2007-2013, under grant agreement No. 241309.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Dense membranes for oxygen and hydrogen separation (DEMOYS): project overview and first results

  • Pinacci, P.
  • Louradour, E.
  • Wimbert, L.
  • Gindrat, M.
  • Jarligo, M.O.
  • Vassen, R.
  • Comite, A.
  • Jewulski, J.
  • Mancuso, L.
  • Chiesa, P.
  • Prestat, M.
  • Ivers-Tiffee, E.
  • Serra Alfaro, José Manuel|||0000-0002-1515-1106
This paper provides an overview of objectives, structure and first results of the DEMOYS project, financially supported by the European Commission in the frame of the 7th FP Energy. The project started on May 1, 2010 and brings together fifteen Partners, including three Universities, five Research Organizations and seven Industries. The objective of DEMOYS is the development of thin mixed conducting membranes for O-2 and H-2 separation by using a new deposition technique "Plasma Spraying - Thin Film" (PS-TF) in combination with nano-porous, highly catalytic layers. (C) 2013 The Authors. Published by Elsevier Ltd. Open access under CC BY-NC-ND license. Selection and/or peer-review under responsibility of GHGT, DEMOYS receives funding from the European Community's Seventh Framework Programme, FP7/2007-2013, under grant agreement no 241309.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Towards upscaling of La5.5WO11.25-d manufacture for Plasma Spraying-Thin Film coated hydrogen permeable membranes

  • Escolástico Rozalén, Sonia
  • Solís, Cecilia
  • Comite, V.
  • Azzurri, F.
  • Gindrat, M.
  • Moser, S.
  • Rauch, J.
  • Szyndelman, G.
  • Damani, R.
  • Serra Alfaro, José Manuel
Lanthanum tungstate (La6WO12) is a promising material for the development of hydrogen separation membranes, proton ceramic electrolyzer cells and protonic ceramic fuel cells due to its interesting transport properties and stability under different operation conditions. In order to improve the hydrogen transport through the La6WO12 membranes, thin membranes should be manufactured. This work is based on the industrial production of La5.5WO11.25-¿ (LWO) powder by spray drying and the manufacturing of thin membranes by low-pressure plasma spraying (LPPS-TF) technique. LPPS-TF allows the production of dense thin films of high quality in an industrial scale. The powders produced by spray drying were morphological and electrochemically characterized. Hydrogen permeation fluxes of a membrane manufactured with these powders were evaluated and fluxes are similar to those reported previously for LWO powder produced in the lab scale. Finally, the transport properties of LWO thin films deposited on Al2O3 indicate that LPPS-TF produces high-quality LWO films with potential for integration in different applications., This work was financially supported by the European Union (DEMOYS Project, FP7/2007-2013-Grant Agreement 241309) and the Spanish Government (RTI2018-102161, SEV-2016-0683 and IJCI-2016-28330 grants).