Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 5
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Optimal light harvesting structures at optical and infrared frequencies

  • Villate-Guío, F.
  • López-Tejeira, F.
  • García-Vidal, F. J.
  • Martín-Moreno, Luis
  • León-Pérez, F. de
One-dimensional light harvesting structures with a realistic geometry nano-patterned on an opaque metallic film are optimized to render high transmission efficiencies at optical and infrared frequencies. Simple design rules are developed for the particular case of a slit-groove array with a given number of grooves that are symmetrically distributed with respect to a central slit. These rules take advantage of the hybridization of Fabry-Perot modes in the slit and surface modes of the corrugated metal surface. Same design rules apply for optical and infrared frequencies. The parameter space of the groove array is also examined with a conjugate gradient optimization algorithm that used as a seed the geometries optimized following physical intuition. Both uniform and nonuniform groove arrays are considered. The largest transmission enhancement, with respect to a uniform array, is obtained for a chirped groove profile. Such relative enhancement is a function of the wavelength. It decreases from 39 % in the optical part of the spectrum to 15 % at the long wavelength infrared. © 2012 Optical Society of America., The authors gratefully acknowledge financial support by European Projects FP6 PLEAS project Ref. 034506 and EC FP7-ICT PLAISIR Project Ref. 247991, and the Spanish Ministry of Science and Innovation project MAT2011-28581-C02-02., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Transmittance of a subwavelength aperture flanked by a finite groove array placed near the focus of a conventional lens

  • Villate-Guío, F.
  • Martín-Moreno, Luis
  • León-Pérez, F. de
arXiv:1403.4968v1, In this paper, we study the optical response of 1D light harvesting structures that are illuminated by a conventional lens. Our theoretical study shows that high transmission efficiencies are obtained when the structure is placed near the focal plane of the lens. The considered structure is a finite slit-groove array (SGA) with a given number of grooves, which are symmetrically distributed with respect to a central slit. The SGA is nanopatterned on an opaque metallic film. It is found that a total transmittance of 80% is achieved even for a single slit when (1) Fabry-Perot-like modes are excited inside the slit and (2) the effective cross section of the aperture becomes of the order of the FWHMof the incident beam. A further enhancement of 8% is produced by the groove array. The optimal geometry for the groove array consists of a moderate number of grooves (≥4) at either side of the slit, separated by a distance of half the incident wavelength λ. Grooves should be deeper (with depth ≥λ/4) than those typically reported for plane wave illumination in order to increase their individual scattering cross section. © 2014 Optical Society of America., The authors gratefully acknowledge financial support by European Projects EC FP7-ICT PLAISIR Project Ref. 247991 and the Spanish Ministry of Science and Innovation project MAT2011-28581-C02-02., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Mechanisms for photon sorting based on slit-groove arrays

  • Villate-Guío, F.
  • Martín-Moreno, Luis
  • León-Pérez, F. de
Mechanisms for one-dimensional photon sorting are theoretically studied in the framework of a coupled-mode method. The considered system is a nanopatterned structure composed of two different pixels drilled on the surface of a thin gold layer. Each pixel consists of a slit-groove array designed to squeeze a large fraction of the incident light into the central slit. The Double-Pixel is optimized to resolve two different frequencies in the near infrared. This system shows high transmission efficiencies and a small crosstalk. It is found that the response of the system strongly depends on the effective area shared by overlapping pixels. According to such degree of overlap, photon sorting can be achieved within three different regimes, which are discussed in detail. Optimal photon-sorting efficiencies are obtained for a moderate number of grooves that overlap with grooves of the neighbor pixel. These results could be applied to both optical and infrared detectors., The authors gratefully acknowledge financial support by European Projects EC FP7-ICT PLAISIR Project Ref. 247991, the Spanish Ministry of Science and Innovation project MAT2011-28581-C02-02, and the CUD project Ref. 2013-13., Peer Reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Mechanisms for photon sorting based on slit-groove arrays

  • Villate-Guío, F.
  • Martín-Moreno, L.
  • De León-Pérez, F.
Mechanisms for one-dimensional photon sorting are theoretically studied in the framework of a coupled-mode method. The considered system is a nanopatterned structure composed of two different pixels drilled on the surface of a thin gold layer. Each pixel consists of a slit groove array designed to squeeze a large fraction of the incident light into the central slit. The Double-Pixel is optimized to resolve two different frequencies in the near infrared. This system shows high transmission efficiencies and a small crosstalk. It is found that the response of the system strongly depends on the effective area shared by overlapping pixels. According to such degree of overlap, photon sorting can be achieved within three different regimes, which are discussed in detail. Optimal photon-sorting efficiencies are obtained for a moderate number of grooves that overlap with grooves of the neighbor pixel. These results could be applied to both optical and infrared detectors.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Optimal light harvesting structures at optical and infrared frequencies

  • Villate Guío, Fernando
  • López-Tejeira, Fernando.
  • García Vidal, Francisco Javier
  • Martín Moreno, Luis
  • León Pérez, Fernando de
One-dimensional light harvesting structures with a realistic geometry nano-patterned on an opaque metallic film are optimized to render high transmission efficiencies at optical and infrared frequencies. Simple design rules are developed for the particular case of a slit-groove array with a given number of grooves that are symmetrically distributed with respect to a central slit. These rules take advantage of the hybridization of Fabry-Perot modes in the slit and surface modes of the corrugated metal surface. Same design rules apply for optical and infrared frequencies. The parameter space of the groove array is also examined with a conjugate gradient optimization algorithm that used as a seed the geometries optimized following physical intuition. Both uniform and nonuniform groove arrays are considered. The largest transmission enhancement, with respect to a uniform array, is obtained for a chirped groove profile. Such relative enhancement is a function of the wavelength. It decreases from 39 % in the optical part of the spectrum to 15 % at the long wavelength infrared.