Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 17
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Picos: A hardware runtime architecture support for OmpSs

  • Yazdanpanah, Fahimeh
  • Álvarez, Carlos
  • Jimenez, Daniel A.
  • Badia, Rosa M.
  • Valero, Mateo
© 2015 Elsevier B.V. All rights reserved. OmpSs is a programming model that provides a simple and powerful way of annotating sequential programs to exploit heterogeneity and task parallelism based on runtime data dependency analysis, dataflow scheduling and out-of-order task execution; it has greatly influenced Version 4.0 of the OpenMP standard. The current implementation of OmpSs achieves those capabilities with a pure-software runtime library: Nanos++. Therefore, although powerful and easy to use, the performance benefits of exploiting fine-grained (pico) task parallelism are limited by the software runtime overheads. To overcome this handicap we propose Picos, an implementation of the Task Superscalar (TSS) architecture that provides hardware support to the OmpSs programming model. Picos is a novel hardware dataflow-based task scheduler that dynamically analyzes inter-task dependencies and identifies task-level parallelism at run-time. In this paper, we describe the Picos Hardware Design and the latencies of the main functionality of its components, based on the synthesis of their VHDL design. We have implemented a full cycle-accurate simulator based on those latencies to perform a design exploration of the characteristics and number of its components in a reasonable amount of time. Finally, we present a comparison of the Picos and Nanos++ runtime performance scalability with a set of real benchmarks. With Picos, a programmer can achieve ideal scalability using aggressive parallel strategies with a large number of fine granularity tasks., This work is supported by the Spanish Government through Programa Severo Ochoa (SEV-2011-0067), by the Spanish Ministry of Science and Technology through TIN2012-34557 project, by the Generalitat de Catalunya (contract 2009-SGR-980), by the European FP7 project TERAFLUX id. 249013 and by the European Research Council under the European Union’s 7th FP, ERC Grant Agreement number 321253. We also thank the Xilinx University Program for its hardware and software donations, Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Task superscalar: an out-of-order task pipeline

  • Etsion, Yoav
  • Cabarcas, Felipe
  • Rico Carro, Alejandro
  • Ramírez Bellido, Alejandro
  • Badia Sala, Rosa Maria|||0000-0003-2941-5499
  • Ayguadé Parra, Eduard|||0000-0002-5146-103X
  • Labarta Mancho, Jesús José|||0000-0002-7489-4727
  • Valero Cortés, Mateo|||0000-0003-2917-2482
We present Task Superscalar, an abstraction of instruction-level out-of-order pipeline that operates at the tasklevel. Like ILP pipelines, which uncover parallelism in a sequential instruction stream, task superscalar uncovers tasklevel parallelism among tasks generated by a sequential thread. Utilizing intuitive programmer annotations of task inputs and outputs, the task superscalar pipeline dynamically detects intertask data dependencies, identifies task-level parallelism, and executes tasks out-of-order. Furthermore, we propose a design for a distributed task superscalar pipeline frontend, that can be embedded into any manycore fabric, and manages cores as functional units. We show that our proposed mechanism is capable of driving hundreds of cores simultaneously with non-speculative tasks, which allows our pipeline to sustain work windows consisting of tens of thousands of tasks. We further show that our pipeline can maintain a decode rate faster than 60ns per task and dynamically uncover data dependencies among as many as ~50,000 in-flight tasks, using 7MB of on-chip eDRAM storage. This configuration achieves speedups of 95–255x (average 183x) over sequential execution for nine scientific benchmarks, running on a simulated CMP with 256 cores. Task superscalar thus enables programmers to exploit manycore systems effectively, while simultaneously simplifying their programming model., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Analysis of the Task Superscalar architecture hardware design

  • Yazdanpanah Ahmadabadi, Fahimeh
  • Jiménez González, Daniel|||0000-0001-6064-7883
  • Álvarez Martínez, Carlos|||0000-0003-0536-5183
  • Etsion, Yoav
  • Badia Sala, Rosa Maria|||0000-0003-2941-5499
In this paper, we analyze the operational flow of two hardware implementations of the Task Superscalar architecture. The Task Superscalar is an experimental task based dataflow scheduler that dynamically detects inter-task data dependencies, identifies task-level parallelism, and executes tasks in the out-of-order manner. In this paper, we present a base implementation of the Task Superscalar architecture, as well as a new design with improved performance. We study the behavior of processing some dependent and non-dependent tasks with both base and improved hardware designs and present the simulation results compared with the results of the runtime implementation., This work is supported by the Ministry of Science and Technology of Spain and the European Union (FEDER funds) under contract TIN2007-60625, by the Generalitat de Catalunya (contract 2009-SGR-980), and by the European FP7 project TERAFLUX id. 249013, http://www.tera ux.eu. We would also like to thank the Xilinx University Program for its hardware and software donations.
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Self-adaptive OmpSs tasks in heterogeneous environments

  • Planas Carbonell, Judit|||0000-0002-8221-7988
  • Badia Sala, Rosa Maria|||0000-0003-2941-5499
  • Ayguadé Parra, Eduard|||0000-0002-5146-103X
  • Labarta Mancho, Jesús José|||0000-0002-7489-4727
As new heterogeneous systems and hardware accelerators appear, high performance computers can reach a higher level of computational power. Nevertheless, this does not come for free: the more heterogeneity the system presents, the more complex becomes the programming task in terms of resource management. OmpSs is a task-based programming model and framework focused on the runtime exploitation of parallelism from annotated sequential applications. This paper presents a set of extensions to this framework: we show how the application programmer can expose different specialized versions of tasks (i.e. pieces of specific code targeted and optimized for a particular architecture) and how the system can choose between these versions at runtime to obtain the best performance achievable for the given application. From the results obtained in a multi-GPU system, we prove that our proposal gives flexibility to application's source code and can potentially increase application's performance., This work has been supported by the European Commission through the ENCORE project (FP7-248647), the TERAFLUX project (FP7-249013), the TEXT project (FP7-261580), the HiPEAC-3 Network of Excellence (FP7-ICT 287759), the Intel-BSC Exascale Lab collaboration project, the support of the Spanish Ministry of Education (CSD2007- 00050 and FPU program), the projects of Computación de Altas Prestaciones V and VI (TIN2007-60625, TIN2012-34557) and the Generalitat de Catalunya (2009-SGR-980)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Optimizing the exploitation of multicore processors and GPUs with OpenMP and OpenCL

  • Ferrer, Roger
  • Planas Carbonell, Judit|||0000-0002-8221-7988
  • Bellens, Pieter
  • Duran González, Alejandro
  • González Tallada, Marc|||0000-0002-3780-1106
  • Martorell Bofill, Xavier|||0000-0002-0417-3430
  • Badia Sala, Rosa Maria|||0000-0003-2941-5499
  • Ayguadé Parra, Eduard|||0000-0002-5146-103X
  • Labarta Mancho, Jesús José|||0000-0002-7489-4727
In this paper, we present OMPSs, a programming model based on OpenMP and StarSs, that can also incorporate the use of OpenCL or CUDA kernels. We evaluate the proposal on three different architectures, SMP, Cell/B.E. and GPUs, showing the wide usefulness of the approach. The evaluation is done with four different benchmarks, Matrix Multiply, BlackScholes, Perlin Noise, and Julia Set. We compare the results obtained with the execution of the same benchmarks written in OpenCL, in the same architectures. The results show that OMPSs greatly outperforms the OpenCL environment. It is more flexible to exploit multiple accelerators. And due to the simplicity of the annotations, it increases programmer’s productivity, Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Programmable and scalable reductions on clusters

  • Ciesko, Jan
  • Bueno Hedo, Javier
  • Puzovic, Nikola
  • Ramírez Bellido, Alejandro
  • Badia Sala, Rosa Maria|||0000-0003-2941-5499
  • Labarta Mancho, Jesús José|||0000-0002-7489-4727
Reductions matter and they are here to stay. Wide adoption of parallel processing hardware in a broad range of computer applications has encouraged recent research efforts on their efficient parallelization. Furthermore, trends towards high productivity languages in mainstream computing increases the demand for efficient programming support. In this paper we present a new approach on parallel reductions for distributed memory systems that provides both scalability and programmability. Using OmpSs, a task-based parallel programming model, the developer has the ability to express scalable reductions through a single pragma annotation. This pragma annotation is applicable for tasks as well as for work-sharing constructs (with implicit tasking) and instructs the compiler to generate the required runtime calls. The supporting runtime handles data and task distribution, parallel execution and data reduction. Scalability is achieved through a software cache that maximizes local and temporal data reuse and allows overlapped computation and communication. Results confirm scalability for up to 32 12-core cluster nodes., We thankfully acknowledge the support of the European Commission through the ENCORE project (FP7-248647), the TERAFLUX project (FP7-249013), the TEXT project (FP7- 261580), and the HiPEAC-3 Network of Excellence (FP7/ICT217068), further the support of Intel-BSC Exascale Center, the Spanish Ministry of Education (TIN2007-60625, CSD2007-00050 and FPU program) and the Generalitat de Catalunya (2009-SGR-980).
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Optimizing the exploitation of multicore processors and GPUs with OpenMP and OpenCL

  • Ferrer, Roger
  • Planas Carbonell, Judit|||0000-0002-8221-7988
  • Bellens, Pieter
  • Duran Gonzalez, Alejandro
  • González Tallada, Marc|||0000-0002-3780-1106
  • Martorell Bofill, Xavier|||0000-0002-0417-3430
  • Badia Sala, Rosa Maria|||0000-0003-2941-5499
  • Ayguadé Parra, Eduard|||0000-0002-5146-103X
  • Labarta Mancho, Jesús José|||0000-0002-7489-4727
In this paper, we present OMPSs, a programming model based on OpenMP and StarSs, that can also incorporate the use of OpenCL or CUDA kernels. We evaluate the proposal on three different architectures, SMP, Cell/B.E. and GPUs, showing the wide usefulness of the approach. The evaluation is done with four different benchmarks, Matrix Multiply, BlackScholes, Perlin Noise, and Julia Set. We compare the results obtained with the execution of the same benchmarks written in OpenCL, in the same architectures. The results show that OMPSs greatly outperforms the OpenCL environment. It is more flexible to exploit multiple accelerators. And due to the simplicity of the annotations, it increases programmer’s productivity., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Picos: A hardware runtime architecture support for OmpSs

  • Yazdanpanah Ahmadabadi, Fahimeh
  • Álvarez Martínez, Carlos|||0000-0003-0536-5183
  • Jiménez González, Daniel|||0000-0001-6064-7883
  • Badia Sala, Rosa Maria|||0000-0003-2941-5499
  • Valero Cortés, Mateo|||0000-0003-2917-2482
OmpSs is a programming model that provides a simple and powerful way of annotating sequential programs to exploit heterogeneity and task parallelism based on runtime data dependency analysis, dataflow scheduling and out-of-order task execution; it has greatly influenced Version 4.0 of the OpenMP standard. The current implementation of OmpSs achieves those capabilities with a pure-software runtime library: Nanos++. Therefore, although powerful and easy to use, the performance benefits of exploiting fine-grained (pico) task parallelism are limited by the software runtime overheads. To overcome this handicap we propose Picos, an implementation of the Task Superscalar (TSS) architecture that provides hardware support to the OmpSs programming model. Picos is a novel hardware dataflow-based task scheduler that dynamically analyzes inter-task dependencies and identifies task-level parallelism at run-time. In this paper, we describe the Picos Hardware Design and the latencies of the main functionality of its components, based on the synthesis of their VHDL design. We have implemented a full cycle-accurate simulator based on those latencies to perform a design exploration of the characteristics and number of its components in a reasonable amount of time. Finally, we present a comparison of the Picos and Nanos++ runtime performance scalability with a set of real benchmarks. With Picos, a programmer can achieve ideal scalability using aggressive parallel strategies with a large number of fine granularity tasks., This work is supported by the Spanish Government through Programa Severo Ochoa (SEV-2011-0067), by the Spanish Ministry of Science and Technology through TIN2012-34557 project, by the Generalitat de Catalunya (contract 2009-SGR-980), by the European FP7 project TERAFLUX id. 249013 and by the European Research Council under the European Union’s 7th FP, ERC Grant Agreement number 321253. We also thank the Xilinx University Program for its hardware and software donations., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

The TERAFLUX Project: Exploiting the dataflow paradigm in next generation teradevices

  • Solinas, Marco
  • Badia Sala, Rosa Maria|||0000-0003-2941-5499
  • Bodin, François
  • Cohen, Albert
  • Evripidou, Paraskevas
  • Faraboschi, Paolo
  • Fechner, Bernhard
  • Gao, Guang R.
  • Garbade, Arne
  • Girbal, Sylvain
  • Goodman, Daniel
  • Khan, Behran
  • Koliai, Souad
  • Li, Feng
  • Lujan, Mikel
  • Morin, Laurent
  • Mendelson, Avi
  • Navarro, Nacho|||0000-0003-3637-4568
  • Pop, Antoniu
  • Trancoso, Pedro
  • Ungerer, Theo
  • Valero Cortés, Mateo|||0000-0003-2917-2482
  • Weis, Sebastian
  • Watson, Ian
  • Zuckermann, Stéphane
  • Giorgi, Roberto
Thanks to the improvements in semiconductor technologies, extreme-scale systems such as teradevices (i.e., composed by 1000 billion of transistors) will enable systems with 1000+ general purpose cores per chip, probably by 2020. Three major challenges have been identified: programmability, manageable architecture design, and reliability. TERAFLUX is a Future and Emerging Technology (FET) large-scale project funded by the European Union, which addresses such challenges at once by leveraging the dataflow principles. This paper describes the project and provides an overview of the research carried out by the TERAFLUX consortium., Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Programmable and scalable reductions on clusters

  • Ciesko, Jan
  • Bueno Hedo, Javier
  • Puzovic, Nikola
  • Ramírez Bellido, Alejandro
  • Badia Sala, Rosa Maria
  • Labarta Mancho, Jesús José
Reductions matter and they are here to stay. Wide adoption of parallel processing hardware in a broad range of computer applications has encouraged recent research efforts on their efficient parallelization. Furthermore, trends towards high productivity languages in mainstream computing increases the demand for efficient programming support. In this paper we present a new approach on parallel reductions for distributed memory systems that provides both scalability and programmability. Using OmpSs, a task-based parallel programming model, the developer has the ability to express scalable reductions through a single pragma annotation. This pragma annotation is applicable for tasks as well as for work-sharing constructs (with implicit tasking) and instructs the compiler to generate the required runtime calls. The supporting runtime handles data and task distribution, parallel execution and data reduction. Scalability is achieved through a software cache that maximizes local and temporal data reuse and allows overlapped computation and communication. Results confirm scalability for up to 32 12-core cluster nodes., We thankfully acknowledge the support of the European Commission through the ENCORE project (FP7-248647), the TERAFLUX project (FP7-249013), the TEXT project (FP7- 261580), and the HiPEAC-3 Network of Excellence (FP7/ICT217068), further the support of Intel-BSC Exascale Center, the Spanish Ministry of Education (TIN2007-60625, CSD2007-00050 and FPU program) and the Generalitat de Catalunya (2009-SGR-980)., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Picos: A hardware runtime architecture support for OmpSs

  • Yazdanpanah Ahmadabadi, Fahimeh
  • Álvarez Martínez, Carlos
  • Jiménez González, Daniel
  • Badia Sala, Rosa Maria
  • Valero Cortés, Mateo
OmpSs is a programming model that provides a simple and powerful way of annotating sequential programs to exploit heterogeneity and task parallelism based on runtime data dependency analysis, dataflow scheduling and out-of-order task execution; it has greatly influenced Version 4.0 of the OpenMP standard. The current implementation of OmpSs achieves those capabilities with a pure-software runtime library: Nanos++. Therefore, although powerful and easy to use, the performance benefits of exploiting fine-grained (pico) task parallelism are limited by the software runtime overheads. To overcome this handicap we propose Picos, an implementation of the Task Superscalar (TSS) architecture that provides hardware support to the OmpSs programming model. Picos is a novel hardware dataflow-based task scheduler that dynamically analyzes inter-task dependencies and identifies task-level parallelism at run-time. In this paper, we describe the Picos Hardware Design and the latencies of the main functionality of its components, based on the synthesis of their VHDL design. We have implemented a full cycle-accurate simulator based on those latencies to perform a design exploration of the characteristics and number of its components in a reasonable amount of time. Finally, we present a comparison of the Picos and Nanos++ runtime performance scalability with a set of real benchmarks. With Picos, a programmer can achieve ideal scalability using aggressive parallel strategies with a large number of fine granularity tasks., This work is supported by the Spanish Government through Programa Severo Ochoa (SEV-2011-0067), by the Spanish Ministry of Science and Technology through TIN2012-34557 project, by the Generalitat de Catalunya (contract 2009-SGR-980), by the European FP7 project TERAFLUX id. 249013 and by the European Research Council under the European Union’s 7th FP, ERC Grant Agreement number 321253. We also thank the Xilinx University Program for its hardware and software donations., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Task superscalar: an out-of-order task pipeline

  • Etsion, Yoav
  • Cabarcas, Felipe
  • Rico Carro, Alejandro
  • Ramírez Bellido, Alejandro
  • Badia Sala, Rosa Maria
  • Ayguadé Parra, Eduard
  • Labarta Mancho, Jesús José
  • Valero Cortés, Mateo
We present Task Superscalar, an abstraction of instruction-level out-of-order pipeline that operates at the tasklevel. Like ILP pipelines, which uncover parallelism in a sequential instruction stream, task superscalar uncovers tasklevel parallelism among tasks generated by a sequential thread. Utilizing intuitive programmer annotations of task inputs and outputs, the task superscalar pipeline dynamically detects intertask data dependencies, identifies task-level parallelism, and executes tasks out-of-order. Furthermore, we propose a design for a distributed task superscalar pipeline frontend, that can be embedded into any manycore fabric, and manages cores as functional units. We show that our proposed mechanism is capable of driving hundreds of cores simultaneously with non-speculative tasks, which allows our pipeline to sustain work windows consisting of tens of thousands of tasks. We further show that our pipeline can maintain a decode rate faster than 60ns per task and dynamically uncover data dependencies among as many as ~50,000 in-flight tasks, using 7MB of on-chip eDRAM storage. This configuration achieves speedups of 95–255x (average 183x) over sequential execution for nine scientific benchmarks, running on a simulated CMP with 256 cores. Task superscalar thus enables programmers to exploit manycore systems effectively, while simultaneously simplifying their programming model., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Optimizing the exploitation of multicore processors and GPUs with OpenMP and OpenCL

  • Ferrer, Roger
  • Planas Carbonell, Judit
  • Bellens, Pieter
  • Duran González, Alejandro
  • González Tallada, Marc
  • Martorell Bofill, Xavier
  • Badia Sala, Rosa Maria
  • Ayguadé Parra, Eduard
  • Labarta Mancho, Jesús José
In this paper, we present OMPSs, a programming model based on OpenMP and StarSs, that can also incorporate the use of OpenCL or CUDA kernels. We evaluate the proposal on three different architectures, SMP, Cell/B.E. and GPUs, showing the wide usefulness of the approach. The evaluation is done with four different benchmarks, Matrix Multiply, BlackScholes, Perlin Noise, and Julia Set. We compare the results obtained with the execution of the same benchmarks written in OpenCL, in the same architectures. The results show that OMPSs greatly outperforms the OpenCL environment. It is more flexible to exploit multiple accelerators. And due to the simplicity of the annotations, it increases programmer’s productivity, Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Optimizing the exploitation of multicore processors and GPUs with OpenMP and OpenCL

  • Ferrer, Roger
  • Planas Carbonell, Judit
  • Bellens, Pieter
  • Duran Gonzalez, Alejandro
  • González Tallada, Marc
  • Martorell Bofill, Xavier
  • Badia Sala, Rosa Maria
  • Ayguadé Parra, Eduard
  • Labarta Mancho, Jesús José
In this paper, we present OMPSs, a programming model based on OpenMP and StarSs, that can also incorporate the use of OpenCL or CUDA kernels. We evaluate the proposal on three different architectures, SMP, Cell/B.E. and GPUs, showing the wide usefulness of the approach. The evaluation is done with four different benchmarks, Matrix Multiply, BlackScholes, Perlin Noise, and Julia Set. We compare the results obtained with the execution of the same benchmarks written in OpenCL, in the same architectures. The results show that OMPSs greatly outperforms the OpenCL environment. It is more flexible to exploit multiple accelerators. And due to the simplicity of the annotations, it increases programmer’s productivity., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

The TERAFLUX Project: Exploiting the dataflow paradigm in next generation teradevices

  • Solinas, Marco
  • Badia Sala, Rosa Maria
  • Bodin, François
  • Cohen, Albert
  • Evripidou, Paraskevas
  • Faraboschi, Paolo
  • Fechner, Bernhard
  • Gao, Guang R.
  • Garbade, Arne
  • Girbal, Sylvain
  • Goodman, Daniel
  • Khan, Behran
  • Koliai, Souad
  • Li, Feng
  • Lujan, Mikel
  • Morin, Laurent
  • Mendelson, Avi
  • Navarro, Nacho
  • Pop, Antoniu
  • Trancoso, Pedro
  • Ungerer, Theo
  • Valero Cortés, Mateo
  • Weis, Sebastian
  • Watson, Ian
  • Zuckermann, Stéphane
  • Giorgi, Roberto
Thanks to the improvements in semiconductor technologies, extreme-scale systems such as teradevices (i.e., composed by 1000 billion of transistors) will enable systems with 1000+ general purpose cores per chip, probably by 2020. Three major challenges have been identified: programmability, manageable architecture design, and reliability. TERAFLUX is a Future and Emerging Technology (FET) large-scale project funded by the European Union, which addresses such challenges at once by leveraging the dataflow principles. This paper describes the project and provides an overview of the research carried out by the TERAFLUX consortium., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Self-adaptive OmpSs tasks in heterogeneous environments

  • Planas Carbonell, Judit
  • Badia Sala, Rosa Maria
  • Ayguadé Parra, Eduard
  • Labarta Mancho, Jesús José
As new heterogeneous systems and hardware accelerators appear, high performance computers can reach a higher level of computational power. Nevertheless, this does not come for free: the more heterogeneity the system presents, the more complex becomes the programming task in terms of resource management. OmpSs is a task-based programming model and framework focused on the runtime exploitation of parallelism from annotated sequential applications. This paper presents a set of extensions to this framework: we show how the application programmer can expose different specialized versions of tasks (i.e. pieces of specific code targeted and optimized for a particular architecture) and how the system can choose between these versions at runtime to obtain the best performance achievable for the given application. From the results obtained in a multi-GPU system, we prove that our proposal gives flexibility to application's source code and can potentially increase application's performance., This work has been supported by the European Commission through the ENCORE project (FP7-248647), the TERAFLUX project (FP7-249013), the TEXT project (FP7-261580), the HiPEAC-3 Network of Excellence (FP7-ICT 287759), the Intel-BSC Exascale Lab collaboration project, the support of the Spanish Ministry of Education (CSD2007- 00050 and FPU program), the projects of Computación de Altas Prestaciones V and VI (TIN2007-60625, TIN2012-34557) and the Generalitat de Catalunya (2009-SGR-980)., Peer Reviewed, Postprint (author’s final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Analysis of the Task Superscalar architecture hardware design

  • Yazdanpanah Ahmadabadi, Fahimeh
  • Jiménez González, Daniel
  • Álvarez Martínez, Carlos
  • Etsion, Yoav
  • Badia Sala, Rosa Maria
In this paper, we analyze the operational flow of two hardware implementations of the Task Superscalar architecture. The Task Superscalar is an experimental task based dataflow scheduler that dynamically detects inter-task data dependencies, identifies task-level parallelism, and executes tasks in the out-of-order manner. In this paper, we present a base implementation of the Task Superscalar architecture, as well as a new design with improved performance. We study the behavior of processing some dependent and non-dependent tasks with both base and improved hardware designs and present the simulation results compared with the results of the runtime implementation., This work is supported by the Ministry of Science and Technology of Spain and the European Union (FEDER funds) under contract TIN2007-60625, by the Generalitat de Catalunya (contract 2009-SGR-980), and by the European FP7 project TERAFLUX id. 249013, http://www.tera ux.eu. We would also like to thank the Xilinx University Program for its hardware and software donations., Postprint (author’s final draft)