Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 10
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Phononic and photonic nanostructures

  • Sotomayor Torres, C. M.
Trabajo presentado a la Conferencia "BNC-b Research Meeting" celebrada en Barcelona el 14 de julio de 2011.-- et al., The Phononic and Photonic nanostructures (P2N) group investigates the interaction of photons, phonons and electrons in nanoscale condensed matter underpinn ed by research in nanofabrication and nanometrology. Its long term aim is to develop new information technology concepts where information processing is achieved with multiple state variables. The P2N group research on nanoscale thermal transport impacts thermal management in nanoelectronics. Similarly, the optical studies of acoustic effects in confined and phononic systems explores the limits of couple state-variables. The technology-oriented work on exciton-plasmon coupling printed polymer-based photonic structures targets enhanced light extraction from light sources, while the quest for novel nanometrology paves the way for future standards in nanotechnology. Finally. self- assembly research is oriented to pushing the limits of lithography while simultan eously enabling new functions for Beyond CMOS., The research carried out at the P2N is funded by the following projects: NANOPACK (FP7 grant agreement no. 216176); NanoICT (FP7 grant agreement no. 216165); NAPANIL (FP7 grant agreement no. 214249); TAILPHOX (FP7 grant agreement no. 233883); SEAL (FP7 grant agreement no. 257379); LAMAND (FP7 grant agreement no. 245565); NANOPOWER (FP7 grant agreement no. 256959); NANOFUNCTION (FP7 grant agreement no. 257375); NANO-TEC (FP7 grant agreement no. 257964); Collaboration project between CSIC and the University of Chile (MICINN contract no. 2008CL0046); Support to Emerging Groups by the Agencia de Gestió d’Ajuts Universitaris i de Recerca de la Generalitat de Catalunya (AGAUR contract no. 2009 SGR 150); ACPHIN (MICINN contract no. FIS2009-10150); nanoTHERM (CONSOLIDER-Ingenio 2010, MICINN contract number CSD2010-00044); Juan de la Cierva programme - Towards a phonon source based on opto-mechanical crystals (MICINN contract number JCI-2010-06591)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Direct measurement of room-temperature nondiffusive thermal transport over micron distances in a silicon membrane

  • Johnson, Jeremy A.
  • Maznev, A. A.
  • Cuffe, John
  • Eliason, Jeffrey K.
  • Minnich, Austin J.
  • Kehoe, Timothy
  • Sotomayor Torres, C. M.
  • Chen, Gang
  • Nelson, Keith A.
The >textbook> phonon mean free path of heat carrying phonons in silicon at room temperature is ~40 nm. However, a large contribution to the thermal conductivity comes from low-frequency phonons with much longer mean free paths. We present a simple experiment demonstrating that room-temperature thermal transport in Si significantly deviates from the diffusion model already at micron distances. Absorption of crossed laser pulses in a freestanding silicon membrane sets up a sinusoidal temperature profile that is monitored via diffraction of a probe laser beam. By changing the period of the thermal grating we vary the heat transport distance within the range ~1-10 ¿m. At small distances, we observe a reduction in the effective thermal conductivity indicating a transition from the diffusive to the ballistic transport regime for the low-frequency part of the phonon spectrum. © 2013 American Physical Society., This work was supported as part of the S3TEC Energy Frontier Research Center funded by the U.S. Department of Energy, Office of Basic Energy Sciences under Award No. DE-SC0001299/DE-FG02-09ER46577 (experimental setup and data analysis). This work was also partially supported by projects NANOPOWER, Contract No. 256959; TAILPHOX, Contract No. 233883; NANOFUNCTION, Contract No. 257375; ACPHIN, Contract No. FIS2009-150; and AGAUR, 2009-SGR-150., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Lifetimes of confined acoustic phonons in ultrathin silicon membranes

  • Cuffe, John
  • Chávez-Angel, Emigdio
  • Chapuis, Olivier
  • Alzina, Francesc
  • Sotomayor Torres, C. M.
We study the relaxation of coherent acoustic phonon modes with frequencies up to 500 GHz in ultrathin free-standing silicon membranes. Using an ultrafast pump-probe technique of asynchronous optical sampling, we observe that the decay time of the first-order dilatational mode decreases significantly from ~4.7 ns to 5 ps with decreasing membrane thickness from ~194 to 8 nm. The experimental results are compared with theories considering both intrinsic phonon-phonon interactions and extrinsic surface roughness scattering including a wavelength-dependent specularity. Our results provide insight to understand some of the limits of nanomechanical resonators and thermal transport in nanostructures. © 2013 American Physical Society., The authors acknowledge financial support from the EU FP7 projects TAILPHOX (Grant No. 233883), NANOPOWER (Grant No. 256959), NANOPACK (Grant No. 216176), and NANOFUNCTION (Grant No. 257375); the Spanish MICINN projects ACPHIN (FIS2009-10150) and nanoTHERM (CSD2010-00044), the AGAUR 2009- SGR-150, the German Research Foundation (Grant No. DFG SFB767) and the Academy of Finland (Grant No. 252598). J. C. gratefully acknowledges support from the Irish Research Council for Science, Engineering and Technology (ICRSET) and E. C. gratefully acknowledges support from a Becas Chile 2010 CONICYT Fellowship from the Chilean government., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Ultra-thin free-standing single crystalline silicon membranes with strain control

  • Shchepetov, A.
  • Alzina, Francesc
  • Schneider, L.
  • Cuffe, John
  • Sotomayor Torres, C. M.
  • Ahopelto, Jouni
et al., We report on fabrication and characterization of ultra-thin suspended single crystalline flat silicon membranes with thickness down to 6 nm. We have developed a method to control the strain in the membranes by adding a strain compensating frame on the silicon membrane perimeter to avoid buckling after the release. We show that by changing the properties of the frame the strain of the membrane can be tuned in controlled manner. Consequently, both the mechanical properties and the band structure can be engineered, and the resulting membranes provide a unique laboratory to study low-dimensional electronic, photonic, and phononic phenomena. © 2013 AIP Publishing LLC., The authors acknowledge the financial support from the FP7 projects NANOFUNCTION (Grant No. 257375) and NANOPOWER (Grant No. ICT-2010-256959). L.S., J.C., F.A., and C.M.S.T. acknowledge the support of the Spanish projects nanoTHERM (Grant No. CSD2010-0044) and ACPHIN (FIS2009-10150). M.P. and A.S. acknowledge funding from the Academy of Finland (Grant No. 252598)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Magnon-drag thermopile

  • Costache, Marius V.
  • Bridoux, Germàn
  • Neumann, Ingmar
  • Valenzuela, Sergio O.
arXiv:1203.5628v1, Thermoelectric effects in spintronics are gathering increasing attention as a means of managing heat in nanoscale structures and of controlling spin information by using heat flow. Thermal magnons (spin-wave quanta) are expected to play a major role; however, little is known about the underlying physical mechanisms involved. The reason is the lack of information about magnon interactions and of reliable methods to obtain it, in particular for electrical conductors because of the intricate influence of electrons. Here, we demonstrate a conceptually new device that enables us to gather information on magnon–electron scattering and magnon-drag effects. The device resembles a thermopile formed by a large number of pairs of ferromagnetic wires placed between a hot and a cold source and connected thermally in parallel and electrically in series. By controlling the relative orientation of the magnetization in pairs of wires, the magnon drag can be studied independently of the electron and phonon-drag thermoelectric effects. Measurements as a function of temperature reveal the effect on magnon drag following a variation of magnon and phonon populations. This information is crucial to understand the physics of electron–magnon interactions, magnon dynamics and thermal spin transport., This research was supported by the Spanish Ministerio de Ciencia e Innovación, MICINN (MAT2010-18065) and by the European Community's Seventh Framework Programme (FP7/2007-2013) under grant agreement NANOFUNCTION no 257375., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Lateral metallic devices made by a multiangle shadow evaporation technique

  • Costache, Marius V.
  • Bridoux, Germàn
  • Neumann, Ingmar
  • Valenzuela, Sergio O.
The Creative Commons Attribution 3.0 Unported License to their work., The authors report the fabrication of lateral metallic structures with multiple materials using specifically designed resist masks and multiangle shadow evaporation. The whole fabrication process is carried out without breaking vacuum, which avoids contamination and allows for highly controlled interface properties between metals deposited sequentially. The authors incorporate the thickness of the mask as a design parameter, which allows one to introduce controlled variations between multiple contacts in the same device. Using a suspended mask, it is demonstrated the fabrication of asymmetric single electron transistors with tunnel junctions with different resistances. Using a nonsuspended mask, it is illustrated the fabrication of an extended structure (a thermopile), which consists of tenths of ferromagnetic wires with a nominal width of 30 nm connected electrically in series using a nonmagnetic metal., This research was supported by the Spanish Ministerio de Ciencia e Innovación, MICINN (MAT2010-18065 and FIS2009-06671-E) and by the European Community’s Seventh Framework Programme (FP7/2007-2013) under grant agreement NANOFUNCTION No. 257375., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

High quality single crystal Ge nano-membranes for opto-electronic integrated circuitry

  • Shah, Vishal
  • Chávez-Angel, Emigdio
  • Shchepetov, A.
  • Reparaz, J. S.
  • Wagner, M. R.
  • Alzina, Francesc
  • Prunnila, M.
  • Sotomayor Torres, C. M.
Under the terms of the Creative Commons Attribution (CC BY) license to their work.-- et al., A thin, flat, and single crystal germanium membrane would be an ideal platform on which to mount sensors or integrate photonic and electronic devices, using standard silicon processing technology. We present a fabrication technique compatible with integrated-circuit wafer scale processing to produce membranes of thickness between 60 nm and 800 nm, with large areas of up to 3.5 mm2. We show how the optical properties change with thickness, including appearance of Fabry-Pérot type interference in thin membranes. The membranes have low Q-factors, which allow the platforms to counteract distortion during agitation and movement. Finally, we report on the physical characteristics showing sub-nm roughness and a homogenous strain profile throughout the freestanding layer, making the single crystal Ge membrane an excellent platform for further epitaxial growth or deposition of materials., This work was carried out under the RCUK Basic Technology Programme supported by research Grant Nos. EP/F040784/1, EP/J001074/1, and EP/L007010/1. It also received funding from the European Community's Seventh Framework Programme (FP7/2007-2013) under Grant Agreement NANOFUNCTION n°257375 alongside funding from TAPHOR (MAT2012–31392) and FP7 Project MERGING (Grant No. 309150). Vibrational property measurements were funded by the ERC under Grant No. 202735, NonContactUltrasonic., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Order quantification of hexagonal periodic arrays fabricated by in situ solvent-assisted nanoimprint lithography of block copolymers

  • Simao, Claudia
  • Khunsin, W.
  • Kehagias, N.
  • Salaun, Mathieu
  • Zelsmann, Marc
  • Morris, Michael A.
  • Sotomayor Torres, C. M.
arXiv:1403.2250v1, Directed self-assembly of block copolymer polystyrene-b-polyethylene oxide (PS-b-PEO) thin film was achieved by a one-pot methodology of solvent vapor assisted nanoimprint lithography (SAIL). Simultaneous solvent-anneal and imprinting of a PS-b-PEO thin film on silicon without surface pre-treatments yielded a 250 nm line grating decorated with 20 nm diameter nanodots array over a large surface area of up to 4' wafer scale. The grazing-incidence small-angle x-ray scattering diffraction pattern showed the fidelity of the NIL stamp pattern replication and confirmed the periodicity of the BCP of 40 nm. The order of the hexagonally arranged nanodot lattice was quantified by SEM image analysis using the opposite partner method and compared to conventionally solvent-annealed block copolymer films. The imprint-based SAIL methodology thus demonstrated an improvement in ordering of the nanodot lattice of up to 50%, and allows significant time and cost reduction in the processing of these structures., The research leading to these results received funding from the European Union FP7 under the project LAMAND (grant agreement n° 245565), NANOFUNCTION (grant agreement no. 257375, FP7-ICT-2009-5) and by the Spanish Ministry of Economics and Competitiveness under project TAPHOR contract no. MAT2012-31392 (Plan Nacional de I + D + I (2008–2011), Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Tensile strain mapping in flat germanium membranes

  • Rhead, S. D.
  • Shah, Vishal
  • Reparaz, J. S.
  • Sotomayor Torres, C. M.
Under the terms of the Creative Commons Attribution (CC BY) license to their work.-- et al., Scanning X-ray micro-diffraction has been used as a non-destructive probe of the local crystalline quality of a thin suspended germanium (Ge) membrane. A series of reciprocal space maps were obtained with ~4 μm spatial resolution, from which detailed information on the strain distribution, thickness, and crystalline tilt of the membrane was obtained. We are able to detect a systematic strain variation across the membranes, but show that this is negligible in the context of using the membranes as platforms for further growth. In addition, we show evidence that the interface and surface quality is improved by suspending the Ge., This work was carried out under the RCUK Basic Technology Programme supported by research Grant Nos. EP/F040784/1, EP/J001074/1, EP/L007010/1, by the European Community's Seventh Framework Programme (FP7/2007-2013) under Grant Agreement NANOFUNCTION No. 257375, by TAPHOR (MAT2012–31392), and by FP7 project MERGING (Grant No. 309150). This research used equipment funded by AWM and ERDF through the Science City Energy Efficiency project., Peer Reviewed
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Order quantification of hexagonal periodic arrays fabricated by in situ solvent-assisted nanoimprint lithography of block copolymers

  • Delgado Simao, Claudia|||0000-0003-3837-9311
  • Khunsin, Worawut
  • Kehagias, Nikolaos|||0000-0002-2698-383X
  • Salaun, Mathieu
  • Zelsmann, Marc
  • Morris, Michael A.
  • Sotomayor Torres, Clivia M.|||0000-0001-9986-2716
Directed self-assembly of block copolymer polystyrene-b-polyethylene oxide (PS-b-PEO) thin film was achieved by a one-pot methodology of solvent vapor assisted nanoimprint lithography (SAIL). Simultaneous solvent-anneal and imprinting of a PS-b-PEO thin film on silicon without surface pre-treatments yielded a 250 nm line grating decorated with 20 nm diameter nanodots array over a large surface area of up to 4' wafer scale. The grazing-incidence small-angle x-ray scattering diffraction pattern showed the fidelity of the NIL stamp pattern replication and confirmed the periodicity of the BCP of 40 nm. The order of the hexagonally arranged nanodot lattice was quantified by SEM image analysis using the opposite partner method and compared to conventionally solvent-annealed block copolymer films. The imprint-based SAIL methodology thus demonstrated an improvement in ordering of the nanodot lattice of up to 50%, and allows significant time and cost reduction in the processing of these structures.