Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 10
Encontrada(s) 1 página(s)

UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Developments in acoustics for studying wave-driven boundary layer flow and sediment dynamics over rippled sand-beds

  • Thorne, Peter D.
  • Hurther, David
  • Cooke, Richard D.
  • Cáceres Rabionet, Iván|||0000-0002-7426-7029
  • Barraud, P.A.
  • Sánchez-Arcilla Conejo, Agustín|||0000-0002-3450-6697
The processes of sediment entrainment, transport, and deposition over bedforms are highly dynamic and temporally and spatially variable. Obtaining measurements to understand these processes has led to ongoing developments in instrumentation for studying near-bed sediment dynamics, with the outputs applied to the development and assessment of sediment transport modelling. In the present study results are reported from three acoustic systems deployed to make observations of bedforms, bedload, suspended concentration and horizontal and vertical velocity components. To evaluate the instruments a series of near-bed boundary layer measurements were collected in a large scale flume facility over a rippled bed of medium sand under regular waves. The observations were conducted as part of Joint Research Activities within the EU funded Hydralab project. The suite of acoustic instruments consisted of a Bedform And Suspended Sediment Imager, BASSI, a three dimensional acoustic ripple profiler, 3D-ARP, and three Acoustic Concentration and Velocity Profilers, ACVP's. Here results are reported from the deployment of the instruments, to illustrate the ongoing developments in acoustics and the expanding capability of the application of acoustics to the study of near-bed flow and sediment dynamics., The technical support provided by UPC for this instrument flume study is appreciated. Dr Paul Bell of the National Oceanography Centre, UK, is thanked for his software development for interpretation of the 3D-ARP data. The study was supported by the EU Joint Research Activities WISE and COMPLEX respectively part of HydralabIV, contract number 261520 and Hydralab+ contract number 261520 and NOC-NERC, UK, Marine Physics and Ocean Climate National Capability funds, and by the French DGA funded ANR-ASMA project MESURE (no. ANR-16-ASMA-0005-01). The authors thank the reviewers for their constructive contribution., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

A ferrofluid-based sensor to measure bottom shear stresses under currents and waves

  • Musumerci, Rosaria
  • Marletta, Vincenzo
  • Sánchez-Arcilla Conejo, Agustín|||0000-0002-3450-6697
  • Foti, Enrico
This is an Accepted Manuscript of an article published by Taylor & Francis Group in Journal of Hydraulic Research on 2018, available online at: http://www.tandfonline.com/10.1080/00221686.2017.1397779, The measurement of the near-bottom flow characteristics is crucial to correctly understand coastal processes. To overcome some of the limits of present state-of-the-art measuring instruments, we propose a novel approach to measure bottom shear stress under currents and waves based on the exploitation of magneto-rheological fluids, named ferrofluids. In particular, the deformation of a magnetically controlled ferrofluid drop O(0.01 ml) is transformed by a conditioning circuit into an output voltage which is proportional to the bottom shear stress. Calibration curves are presented for both steady-current and regular wave conditions, over fixed and weakly mobile beds, showing that the behaviour of the proposed measuring system can be assumed linear. In the range of the investigated parameters, it is shown that the working range is comprised between 0.08 N m-2 and an upper limit which is a function of the controlling magnetic field and the flow type., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Effect of wave storm representation on damage measurements of breakwaters

  • Marzeddu, Andrea|||0000-0001-9515-7323
  • Oliveira, Tiago C.A.
  • Sánchez-Arcilla Conejo, Agustín|||0000-0002-3450-6697
  • Gironella Cobos, Xavier|||0000-0002-8862-5704
In this work, the effects of storm representation on damage measurements of a breakwater are studied in a small-scale physical wave flume. In particular, a two-layer breakwater with cubic armor units randomly placed is considered. A storm recorded in the Mediterranean Sea is the basis to analyze the armor layer damage. Storm sea states are represented in the laboratory using four different methodologies: i) Real storm methodology (RSM, used here as benchmark test) ii) Classical methodology (CM) iii) Equivalent Magnitude Storm with a triangular shape (EMSI) and iv) Equivalent Magnitude Storm with a trapezoidal shape (EMSA). For the four methodologies, the experiments are repeated five times. Considering laboratory occupation times, results suggest that a minimum of five repetitions of CM should be performed to obtain an average damage value that can represent the average damage given by RSM. Although this recommendation is linked to the tested conditions, it provides useful information to set-up experiments dealing with similar breakwater and wave conditions., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Sediment transport and beach profile evolution induced by bi-chromatic wave groups with different group periods

  • Alsina Torrent, José María|||0000-0002-3055-5379
  • Padilla, Enrique
  • Cáceres Rabionet, Iván|||0000-0002-7426-7029
In this paper, large-scale experimental data are presented showing the beach profile morphological evolution induced by four different bi-chromatic wave conditions characterized by very similar energy content between them but varying the modulation period. Important differences were observed in the resultant beach profiles as a function of the wave group periods. Larger variability in the profile evolution is generally observed for larger wave group periods and, more importantly, as the wave group period increases the distance between the generated breaker bar and the shoreline increases. The measured primary wave height to depth ratio (¿) increases with the wave group period, which is consistent with the observed larger wave height at the breaking location. The primary wave breaking location is also observed at increasing distances with respect to the initial shoreline as the wave group period increases. The variation in ¿ with wave group period is related to the selective energy dissipation of the higher primary frequency component (f 1) during the wave group shoaling. Broad bandwith conditions (reduced wave group period) lead to larger dissipation of wave heights at the f 1 component relative to f 2 resulting in a reduction in the wave modulation and primary wave height at the breaking location. Suspended sediment fluxes obtained from collocated velocity and sediment concentration measurements in the surf zone showed a consistently larger contribution of the mean return flow to the suspended sediment fluxes compared with the wave group and primary wave components. The distinct beach profile evolution in terms of bar location is interpreted from an increasing distance of the mean breakpoint location and the location of maximum return flow with respect to the shoreline as the wave group period increases., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Numerical modeling of flow and bed evolution of bichromatic wave groups on an intermediate beach using nonhydrostatic XBeach

  • Ruffini, Gioele
  • Briganti, Riccardo
  • Alsina Torrent, José María|||0000-0002-3055-5379
This paper analyzes the modeling of the hydro- and morphodynamics of bichromatic wave groups on an intermediate beach with an initial 1:15 slope. The nonhydrostatic version of XBeach was used to simulate two incident wave conditions of the experiments carried out within the HYDRALAB-IV Coupled High Frequency Measurement of Swash Sediment Transport and Morphodynamic (CoSSedM) project. The chosen forcing conditions have different strengths of swash–swash interaction. A procedure was developed to generate boundary conditions for the model that are able to fully account for both the bound and free long waves measured during the experiments. Using the normalized root-mean-squared error as a measure, this paper finds a higher accuracy of the nonhydrostatic version of XBeach in simulating swash–swash interaction from the hydrodynamics point of view, and worse performances in capturing the details of intragroup sediment transport. Nevertheless, the model is able to distinguish the relative difference in offshore swash sediment transport among different types of swash–swash interaction, and it is overall more successful in simulating beach morphodynamics when the swash sediment transport is of the same order of magnitude as the surf zone one., Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

A ferrofluid-based sensor to measure bottom shear stresses under currents and waves

  • Musumerci, Rosaria
  • Marletta, Vincenzo
  • Sánchez-Arcilla Conejo, Agustín
  • Foti, Enrico
This is an Accepted Manuscript of an article published by Taylor & Francis Group in Journal of Hydraulic Research on 2018, available online at: http://www.tandfonline.com/10.1080/00221686.2017.1397779, The measurement of the near-bottom flow characteristics is crucial to correctly understand coastal processes. To overcome some of the limits of present state-of-the-art measuring instruments, we propose a novel approach to measure bottom shear stress under currents and waves based on the exploitation of magneto-rheological fluids, named ferrofluids. In particular, the deformation of a magnetically controlled ferrofluid drop O(0.01 ml) is transformed by a conditioning circuit into an output voltage which is proportional to the bottom shear stress. Calibration curves are presented for both steady-current and regular wave conditions, over fixed and weakly mobile beds, showing that the behaviour of the proposed measuring system can be assumed linear. In the range of the investigated parameters, it is shown that the working range is comprised between 0.08 N m-2 and an upper limit which is a function of the controlling magnetic field and the flow type., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Numerical modeling of flow and bed evolution of bichromatic wave groups on an intermediate beach using nonhydrostatic XBeach

  • Ruffini, Gioele
  • Briganti, Riccardo
  • Alsina Torrent, José María
This paper analyzes the modeling of the hydro- and morphodynamics of bichromatic wave groups on an intermediate beach with an initial 1:15 slope. The nonhydrostatic version of XBeach was used to simulate two incident wave conditions of the experiments carried out within the HYDRALAB-IV Coupled High Frequency Measurement of Swash Sediment Transport and Morphodynamic (CoSSedM) project. The chosen forcing conditions have different strengths of swash–swash interaction. A procedure was developed to generate boundary conditions for the model that are able to fully account for both the bound and free long waves measured during the experiments. Using the normalized root-mean-squared error as a measure, this paper finds a higher accuracy of the nonhydrostatic version of XBeach in simulating swash–swash interaction from the hydrodynamics point of view, and worse performances in capturing the details of intragroup sediment transport. Nevertheless, the model is able to distinguish the relative difference in offshore swash sediment transport among different types of swash–swash interaction, and it is overall more successful in simulating beach morphodynamics when the swash sediment transport is of the same order of magnitude as the surf zone one., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Effect of wave storm representation on damage measurements of breakwaters

  • Marzeddu, Andrea
  • Oliveira, Tiago C.A.
  • Sánchez-Arcilla Conejo, Agustín
  • Gironella Cobos, Xavier
In this work, the effects of storm representation on damage measurements of a breakwater are studied in a small-scale physical wave flume. In particular, a two-layer breakwater with cubic armor units randomly placed is considered. A storm recorded in the Mediterranean Sea is the basis to analyze the armor layer damage. Storm sea states are represented in the laboratory using four different methodologies: i) Real storm methodology (RSM, used here as benchmark test) ii) Classical methodology (CM) iii) Equivalent Magnitude Storm with a triangular shape (EMSI) and iv) Equivalent Magnitude Storm with a trapezoidal shape (EMSA). For the four methodologies, the experiments are repeated five times. Considering laboratory occupation times, results suggest that a minimum of five repetitions of CM should be performed to obtain an average damage value that can represent the average damage given by RSM. Although this recommendation is linked to the tested conditions, it provides useful information to set-up experiments dealing with similar breakwater and wave conditions., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Sediment transport and beach profile evolution induced by bi-chromatic wave groups with different group periods

  • Alsina Torrent, José María
  • Padilla, Enrique
  • Cáceres Rabionet, Iván
In this paper, large-scale experimental data are presented showing the beach profile morphological evolution induced by four different bi-chromatic wave conditions characterized by very similar energy content between them but varying the modulation period. Important differences were observed in the resultant beach profiles as a function of the wave group periods. Larger variability in the profile evolution is generally observed for larger wave group periods and, more importantly, as the wave group period increases the distance between the generated breaker bar and the shoreline increases. The measured primary wave height to depth ratio (¿) increases with the wave group period, which is consistent with the observed larger wave height at the breaking location. The primary wave breaking location is also observed at increasing distances with respect to the initial shoreline as the wave group period increases. The variation in ¿ with wave group period is related to the selective energy dissipation of the higher primary frequency component (f 1) during the wave group shoaling. Broad bandwith conditions (reduced wave group period) lead to larger dissipation of wave heights at the f 1 component relative to f 2 resulting in a reduction in the wave modulation and primary wave height at the breaking location. Suspended sediment fluxes obtained from collocated velocity and sediment concentration measurements in the surf zone showed a consistently larger contribution of the mean return flow to the suspended sediment fluxes compared with the wave group and primary wave components. The distinct beach profile evolution in terms of bar location is interpreted from an increasing distance of the mean breakpoint location and the location of maximum return flow with respect to the shoreline as the wave group period increases., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Developments in acoustics for studying wave-driven boundary layer flow and sediment dynamics over rippled sand-beds

  • Thorne, Peter D.
  • Hurther, David
  • Cooke, Richard D.
  • Cáceres Rabionet, Iván
  • Barraud, P.A.
  • Sánchez-Arcilla Conejo, Agustín
The processes of sediment entrainment, transport, and deposition over bedforms are highly dynamic and temporally and spatially variable. Obtaining measurements to understand these processes has led to ongoing developments in instrumentation for studying near-bed sediment dynamics, with the outputs applied to the development and assessment of sediment transport modelling. In the present study results are reported from three acoustic systems deployed to make observations of bedforms, bedload, suspended concentration and horizontal and vertical velocity components. To evaluate the instruments a series of near-bed boundary layer measurements were collected in a large scale flume facility over a rippled bed of medium sand under regular waves. The observations were conducted as part of Joint Research Activities within the EU funded Hydralab project. The suite of acoustic instruments consisted of a Bedform And Suspended Sediment Imager, BASSI, a three dimensional acoustic ripple profiler, 3D-ARP, and three Acoustic Concentration and Velocity Profilers, ACVP's. Here results are reported from the deployment of the instruments, to illustrate the ongoing developments in acoustics and the expanding capability of the application of acoustics to the study of near-bed flow and sediment dynamics., The technical support provided by UPC for this instrument flume study is appreciated. Dr Paul Bell of the National Oceanography Centre, UK, is thanked for his software development for interpretation of the 3D-ARP data. The study was supported by the EU Joint Research Activities WISE and COMPLEX respectively part of HydralabIV, contract number 261520 and Hydralab+ contract number 261520 and NOC-NERC, UK, Marine Physics and Ocean Climate National Capability funds, and by the French DGA funded ANR-ASMA project MESURE (no. ANR-16-ASMA-0005-01). The authors thank the reviewers for their constructive contribution., Peer Reviewed, Postprint (author's final draft)