Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 4
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Capítulo o parte de un libro (BookPart)

Assessment of microproject-based teaching/learning (MicroPBL) experience in industrial engineering degrees

  • Pernía-Espinoza, Alpha
  • Sodupe-Ortega, Enrique
  • Martinez-de-Pison-Ascacibar, Fco. Javier
  • Urraca-Valle, Ruben
  • Antoñanzas-Torres, Javier
  • Sanz-García, Andres
[EN] An assessment program to evaluate microproject-based teaching/learning (MicroPBL) methodology on the technical subject ‘Manufacturing Technology’ was implemented for four consecutive academic years. Students from three different engineering degrees were involved providing feedback through different surveys that allowed us to perform a proper evaluation. More specifically, students’ surveys were anonymous after each academic year, except the last one, in which non-anonymous pre and post-surveys were conducted. The surveys were meant to evaluate the acquisition of specific competences (using technical questions about the subject) as well as generic competences (using questions concerning soft-skills). We also checked the students’ satisfaction with the methodology and with the signature in general. Using non-anonymous surveys allowed us to correlate results with the student’s final scores. Students’ self-assessment concerning their knowledge about technical aspects drastically changed after the course. The average of the subject’s final score from student’s perception was slightly higher than the actual value. Student’s self-perception on soft-skills was also increased at the end of the course. The MicroPBL methodology demonstrated beneficial for the case of this technical subject as it maintained high motivation levels in students, which were directly related to students’ success rates and final scores., The authors would like to acknowledge University of La Rioja for the financial support received through the program ‘Proyectos de Innovación Docente 2016/2017’, as well as for the FPI-UR fellowships (E. S., J. A. and R. U.) and EGI16/19 fellowship. The authors also want to express their gratitude to the Instituto de Estudios Riojanos (IER) and to the Banco Santander for the APPI16/05 fellowship. One of the authors, A.S.G., would also like to acknowledge the financial support from the Academy of Finland No. 273689. We would like to thank to the special collaboration of all student involved in this experience.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Capítulo o parte de un libro (BookPart)

Makerspaces in Higher Education: the UR-Maker experience at the University of La Rioja

  • Pernía-Espinoza, Alpha
  • Sodupe-Ortega, Enrique
  • Peciña-Marqueta, Sergio
  • Martínez-Bañares, Sergio
  • Sanz-Garcia, Andres
  • Blanco-Fernandez, Julio
[EN] According to the CDIO (Conceive-Design-Implement-Operate) Syllabus, apart from technical knowledge, labour markets are demanding engineers with personal, interpersonal and system building skills. The current educational system, however, is based on teaching theoretical concepts rather than on practical activities. Makerspaces could become a bridge between universities and industry, particularly in STEM (Science, Technology, Engineering and Math) carriers. Makerspaces, also known as hackerspaces, hack labs and fab labs, are open-access spaces where a community shares tools, machines and knowledge in order to implement an idea. This communication reviews the makerspaces at the world’s top 10 engineering universities and three of the most recognized in Spain. The qualitative data was collected through the universities’ websites. We observed that most of the reviewed universities have outstanding makerspaces for engineering students, generally open to the entire university community. In Spain, the ‘Maker UPV’ was found exceptionally successful in activities and projects performed in spite of their lack of material resources. Lastly, the authors describe their experience implementing a campus makerspace at the University of La Rioja, sharing interesting information about the organization, budget, funding and activities., The authors would like to acknowledge the financial support received from the University of La Rioja through the programs „Proyectos de Innovación Docente 2016/2017‟, and the FPI-UR fellowship (E. S). The authors also want to express their gratitude to the Instituto de Estudios Riojanos (IER). One of the authors, A.S.G., would also like to acknowledge the financial support from the Academy of Finland No. 273689. Finally, we would like to thank the students and university staff involved in the UR-Maker project.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Capítulo o parte de un libro (BookPart)

Active learning and social commitment projects as a teaching-learning intervention in engineering degrees

  • Pernía-Espinoza, Alpha
  • Sanz-Garcia, Andres
  • Martinez-de-Pison-Ascacibar, F. Javier
  • Peciña-Marqueta, Sergio
  • Blanco-Fernandez, Julio
[EN] The purpose of universities, apart from produce qualified professionals with problem-solving capabilities and soft-skills, should be to develop the social responsibility sense on their students. In this context, our proposal combines project based learning (PBL) and service based learning (SBL) along with gamming and the use of open-source machines, with the aim to increase student’s motivation and their social commitment with an affordable budget. The strategy, from now on named OS-PBL-SR (Open-Source-based PBL projects with Social Responsibility), mainly includes three important aspects: (i) assignment with projects orientated towards a social benefit; (ii) development of the projects using open-source Do It Yourself desktop machines (DIY-DkM); and (iii) include gamming in the evaluation method. The strategy was applied in the subject Manufacturing Technology but it might be easily exportable to other technical subjects. The results from the last academic year are presented. Also, a new OS-PBL-SR proposal aimed to the design and fabrication of autonomy-oriented products for people in a dependency situation is presented. The results showed the beneficial impact on undergraduate students by keeping high levels of motivation reflected on excellent success rates and scores. In addition, essential advantages in the use of DIY-DkM were found regarding the implementation of this kind of PBL strategy., The authors would like to acknowledge the financial support received from the University of La Rioja through the programs ‘Proyectos de Innovación Docente 2018/2019’. The authors also want to express their gratitude to the Instituto de Estudios Riojanos (IER). One of the authors, A.S.G., would also like to acknowledge the financial support from the Academy of Finland No. 273689.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Estimation of total soluble solids in grape berries using a hand-held NIR spectrometer under field conditions

  • Urraca, Rubén
  • Sanz-García, Andrés
  • Tardáguila, Javier
  • Diago, Maria P.
[Background] Recent studies have reported the potential of near infrared (NIR) spectral analysers for monitoring the ripeness of grape berries as an alternative to wet chemistry methods. This study covers various aspects regarding the calibration and implementation of predictive models of total soluble solids (TSS) in grape berries using laboratory and in-field collected NIR spectra., [Results] The performance of the calibration models obtained under laboratory conditions indicated that at least 700 berry samples are required to assure enough prediction accuracy. A statistically significant error reduction (ΔRMSECV=0.1°Brix) with P<0.001 was observed when measuring berries without epicuticular wax, which was negligible from a practical point of view. Under field conditions, the prediction errors (RMSEP=1.68°Brix, and SEP=1.67°Brix) were close to those obtained with the laboratory dataset (RMSEP=1.42°Brix, SEP=1.40°Brix)., [Conclusion] This work clarifies several methodological factors to develop a protocol for in-field assessing TSS in grape berries using an affordable, non-invasive, portable NIR spectral analyser., This work has received funding from the European Union's Seventh Programme for research, technological development and demonstration under grant agreement N 311775 (KBBE-INNOVINE). One of the authors (A.S.G.) would like to acknowledge the support provided by the Instituto de Estudios Riojanos (IER), Research Funding No. 273689 (FINSKIN) and mobility grant No. 276371 (VATURP) from the Academy of Finland., Peer Reviewed