Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 4
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Design of hybrid conjugates based on chemical similarity

  • Fabregat, Georgina
  • Ballano, Gema
  • Casanovas, Jordi
  • Laurent, Adèle D.
  • Armelin, Elaine
  • Valle, Luis J. del
  • Cativiela, Carlos
  • Jacquemin, Denis
  • Alemán, Carlos
Conducting polymer-amino acid hybrid materials have been prepared by conjugating poly(3,4-ethylenedioxythiophene) (PEDOT) and an amino acid bearing a 3,4-ethylenedioxythiophene (EDOT) ring as a side group. Two amino acids have been designed, synthesized and characterized. These compounds differ in the presence or not of a methylene group between the EDOT ring and the backbone (i.e.I and II, respectively). The electrochemical properties of PEDOT and their conjugates with I and II (PEDOT-I and PEDOT-II) have been determined using cyclic voltammetry and electrochemical impedance spectroscopy, and subsequently compared. Incorporation of end capping amino acids has been found to increase the hydrophilicity of PEDOT surface, which is consistent with the better behaviour of the conjugates as the cellular matrix. The electronic properties of both the amino acids and the conjugates have been investigated by UV-vis spectroscopy. Results indicate that elimination of the methylene group of I provokes a reduction of 0.13 eV in the π-π* lowest transition energy (Eg) of the conjugate. This decrease is explained by the larger structural flexibility due to the methylene group in I. Calculations of the electronic properties of the two hybrids at the molecular level using quantum mechanical methods suggest that the end capping amino acids essentially affect the electronic intermolecular effects. © The Royal Society of Chemistry 2013., Financial support from the MICINN and FEDER (MAT2012-34498) and Generalitat de Catalunya (research group 2009 SGR 925 and XRQTC) is gratefully acknowledged. Support for the research of C.A. was received through the prize “ICREA Academia” for excellence in research funded by the Generalitat de Catalunya. G.F. thanks the financial support through a FPIUPC grant. A.D.L thanks the CEISAM laboratory for the warm welcome and the Institut de Chimie for supporting her installation in Nantes. D.J. acknowledges the European Research Council (ERC) and the Région des Pays de la Loire for financial support in the framework of a Starting Grant (Marches – 278845) and a recrutement sur poste stratégique, respectively., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Electroactive polymer-peptide conjugates for adhesive biointerfaces

  • Maione, Silvana
  • Gil, Ana M.
  • Fabregat, Georgina
  • Valle, Luis J. del
  • Laurent, Adèle D.
  • Jacquemin, Denis
  • Jiménez, Ana I.
  • Zanuy, David
  • Cativiela, Carlos
  • Alemán, Carlos
Electroactive polymer-peptide conjugates have been synthesized by combining poly(3,4-ethylenedioxythiophene), a polythiophene derivative with outstanding properties, and an Arg-Gly-Asp (RGD)-based peptide in which Gly has been replaced by an exotic amino acid bearing a 3,4-ethylenedioxythiophene ring in the side chain. The incorporation of the peptide at the ends of preformed PEDOT chains has been corroborated by both FTIR and X-ray photoelectron spectroscopy. Although the morphology and topology are not influenced by the incorporation of the peptide at the ends of PEDOT chains, this process largely affects other surface properties. Thus, the wettability of the conjugates is considerably higher than that of PEDOT, independently of the synthetic strategy, whereas the surface roughness only increases when the conjugate is obtained using a competing strategy (i.e. growth of the polymer chains against termination by end capping). The electrochemical activity of the conjugates has been found to be higher than that of PEDOT, evidencing the success of the polymer-peptide links designed by chemical similarity. Density functional theory calculations have been used not only to ascertain the conformational preferences of the peptide but also to interpret the electronic transitions detected by UV-vis spectroscopy. Electroactive surfaces prepared using the conjugates displayed the higher bioactivities in terms of cell adhesion, with the relative viabilities being dependent on the roughness, wettability and electrochemical activity of the conjugate. In addition to the influence of the peptide fragment in the initial cell attachment and subsequent cell spreading and survival, the results indicate that PEDOT promotes the exchange of ions at the conjugate-cell interface., Authors are indebted to supports from MINECO and FEDER (MAT2012-34498, and CTQ2013-40855-R), Generalitat de Catalunya (XRQTC), CESCA and Gobierno de Aragón-FSE (research group E40). D.J. is indebted to the European Research Council (ERC) for support in the framework of the ERC StG grant Marches 278845., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Electroactive polymer-peptide conjugates for adhesive biointerfaces

  • Maione, Silvana
  • Gil, Ana M.
  • Fabregat Jové, Georgina|||0000-0001-8967-9950
  • Valle Mendoza, Luis Javier del|||0000-0001-9916-1741
  • Triguero Enguídanos, Jordi|||0000-0002-3861-5225
  • Laurent, A.
  • Jacquemin, Denis
  • Estrany Coda, Francesc|||0000-0002-2696-1489
  • Jimenez Sanz, Ana Isabel
  • Zanuy Gomara, David|||0000-0001-7704-2178
  • Cativiela, Carlos
  • Alemán Llansó, Carlos|||0000-0003-4462-6075
Electroactive polymer-peptide conjugates have been synthesized by combining poly(3,4-ethylenedioxythiophene), a polythiophene derivative with outstanding properties, and an Arg-Gly-Asp (RGD)-based peptide in which Gly has been replaced by an exotic amino acid bearing a 3,4-ethylenedioxythiophene ring in the side chain. The incorporation of the peptide at the ends of preformed PEDOT chains has been corroborated by both FTIR and X-ray photoelectron spectroscopy. Although the morphology and topology are not influenced by the incorporation of the peptide at the ends of PEDOT chains, this process largely affects other surface properties. Thus, the wettability of the conjugates is considerably higher than that of PEDOT, independently of the synthetic strategy, whereas the surface roughness only increases when the conjugate is obtained using a competing strategy (i.e. growth of the polymer chains against termination by end capping). The electrochemical activity of the conjugates has been found to be higher than that of PEDOT, evidencing the success of the polymer-peptide links designed by chemical similarity. Density functional theory calculations have been used not only to ascertain the conformational preferences of the peptide but also to interpret the electronic transitions detected by UV-vis spectroscopy. Electroactive surfaces prepared using the conjugates displayed the higher bioactivities in terms of cell adhesion, with the relative viabilities being dependent on the roughness, wettability and electrochemical activity of the conjugate. In addition to the influence of the peptide fragment in the initial cell attachment and subsequent cell spreading and survival, the results indicate that PEDOT promotes the exchange of ions at the conjugate-cell interface.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Electroactive polymer-peptide conjugates for adhesive biointerfaces

  • Maione, Silvana
  • Gil, Ana M.
  • Fabregat Jové, Georgina
  • Valle Mendoza, Luis Javier del
  • Triguero Enguídanos, Jordi
  • Laurent, A.
  • Jacquemin, Denis
  • Estrany Coda, Francesc
  • Jimenez Sanz, Ana Isabel
  • Zanuy Gomara, David
  • Cativiela, Carlos
  • Alemán Llansó, Carlos
Electroactive polymer-peptide conjugates have been synthesized by combining poly(3,4-ethylenedioxythiophene), a polythiophene derivative with outstanding properties, and an Arg-Gly-Asp (RGD)-based peptide in which Gly has been replaced by an exotic amino acid bearing a 3,4-ethylenedioxythiophene ring in the side chain. The incorporation of the peptide at the ends of preformed PEDOT chains has been corroborated by both FTIR and X-ray photoelectron spectroscopy. Although the morphology and topology are not influenced by the incorporation of the peptide at the ends of PEDOT chains, this process largely affects other surface properties. Thus, the wettability of the conjugates is considerably higher than that of PEDOT, independently of the synthetic strategy, whereas the surface roughness only increases when the conjugate is obtained using a competing strategy (i.e. growth of the polymer chains against termination by end capping). The electrochemical activity of the conjugates has been found to be higher than that of PEDOT, evidencing the success of the polymer-peptide links designed by chemical similarity. Density functional theory calculations have been used not only to ascertain the conformational preferences of the peptide but also to interpret the electronic transitions detected by UV-vis spectroscopy. Electroactive surfaces prepared using the conjugates displayed the higher bioactivities in terms of cell adhesion, with the relative viabilities being dependent on the roughness, wettability and electrochemical activity of the conjugate. In addition to the influence of the peptide fragment in the initial cell attachment and subsequent cell spreading and survival, the results indicate that PEDOT promotes the exchange of ions at the conjugate-cell interface., Postprint (published version)