Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 15
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Three-dimensional fabrication and characterisation of core-shell nano-columns using electron beam patterning of Ge-doped SiO2

  • Gontard, Lionel C.
  • Jinschek, Joerg R.
  • Ou, Haiyan
  • Verbeeck, Jo
  • Dunin-Borkowski, Rafal E.
5 páginas, A focused electron beam in a scanning transmission electron microscope (STEM) is used to create arrays of core-shell structures in a specimen of amorphous SiO2 doped with Ge. The same electron microscope is then used to measure the changes that occurred in the specimen in three dimensions using electron tomography. The results show that transformations in insulators that have been subjected to intense irradiation using charged particles can be studied directly in three dimensions. The fabricated structures include core-shell nano-columns, sputtered regions, voids, and clusters, Work funded under EC FP7 project Al-NanoFunc, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

New insights into the synergistic effect in bimetallic-boron catalysts for hydrogen generation: The Co–Ru–B system as a case study

  • Arzac, G.M.
  • Rojas, T. Cristina
  • Fernández-Camacho, A.
9 páginas, Catalysed sodium borohydride hydrolysis is a high-potential method to produce hydrogen for portable applications. Co–B catalysts are the most chosen because they are easily prepared, cheap and efficient. The addition of small amounts of Ru produces a significant enhancement in catalytic activity. In the present work a series of Co–Ru–B catalysts with variable Ru content was prepared, isolated and characterized. The comprehension of the synergistic effect was achieved trough the incorporation of the nanostructural dimension to the study of surface and bulk chemical states of the involved atoms along the series. It was found that up to 70% (of total metal) atomic content of Ru the catalysts can be considered isostructural to the single Co–B catalyst in the nanoscale. A structural transition occurs in the case of the pure Ru–B material to produce a boron deficient material with higher nanoparticle size. This structural transition together with Co segregation and Ru dispersion play a key role when explaining a [OH−] dependent effect. The inexistence of borate layers in Ru rich catalysts is suggestive in the research for non deactivating catalysts., Authors thank the financial support from Spanish Ministry MICINN (CTQ2009-13440), the EC (CT-REGPOT-2011-1-285895, AL-NANOFUNC), the CSIC (201060I041, 200460E643) and Junta de Andalucía (TEP217)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Deactivation, reactivation and memoryeffect on Co–B catalyst for sodium borohydride hydrolysis operating in high conversion conditions

  • Arzac, G.M.
  • Hufschmidt, D.
  • Jiménez de Haro, María del Carmen
  • Fernández-Camacho, A.
  • Sarmiento, B.
  • Jiménez, M. A.
  • Jiménez, M. M.
9 páginas, A system with a continuous reactor to produce hydrogen by sodium borohydride hydrolysis was designed and built. The purpose was to test a supported Co–B catalyst durability upon cycling and long life experiments in high conversion conditions. A Stainless Steel monolith was built and calcined to improve adherence. For comparison a Ru–B catalyst was tested upon cycling. Both Co–B and Ru–B catalysts are durable during 6 cycles and then deactivate. A known reactivation procedure has proven to be more effective for the Co–B than for the Ru–B catalyst. This is related to stronger adsorption of B–O based compounds on the Co–B catalyst which is reversible upon acid washing. For the Ru–B catalyst deactivation may be more related to particle agglomeration than to the adsorption of B–O based species. The continuous system enlarges the catalysts durability because of the continuous borate elimination at elevated temperatures., Financial support from Abengoa Hidrógeno S.A., MICINN (Project CTQ2009-13440), “Junta de Andalucía” (TEP217) and the EC (CT-REGPOT-2011-1-285895, AL-NANOFUNC) is acknowledged. We thank to Dr. Angel Justo for the XRD measurements, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Magnetron sputtered a-SiOxNy thin films: A closed porous nanostructure with controlled optical and mechanical properties

  • Godinho, Vanda
  • Rojas, T. Cristina
  • Fernández-Camacho, A.
5 Páginas, 5 figuras, 4 tablas, were prepared by magnetron sputtering. Pores size, shape and distribution were evaluated by scanning electron microscopy and transmission electron microscopy. Raman and EELS analysis proved that the pores are filled with molecular nitrogen trapped during deposition. The mechanical properties evaluated by nanoindentation shows that the presence of closed nano-porosity does not compromise the mechanical integrity of these coatings. The introduction of closed porosity is shown as a good strategy for obtaining lower dielectric Amorphous silicon oxynitride coatings with similar composition and different closed porosity constant silicon oxynitride coatings with similar composition while keeping the good mechanical properties (∼13 GPa) characteristic of this type of coatings. The presence of close porosity gives also a good stability of coatings properties as compared to open porosity microstructures where gas phase in contact with the coatings can affect coatings properties., Authors thank the financial support from EC (NANOINDENT and REGPOT AL-NANOFUNC), CSIC (201060I041 and 201060E102), Spainish Ministry MICINN (Consolider FUNCOAT) and Junta de Andalucia (TEP 217)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Microstructural characterization of hydrophobic Ti1−xAlxN coatings with moth-eye-like surface morphology

  • Godinho, Vanda
  • López-Santos, Carmen
  • Rojas, T. Cristina
  • Philippon, D.
  • Jiménez de Haro, María del Carmen
  • Lucas, S.
  • Fernández-Camacho, A.
9 páginas, 9 figuras, 3 tablas, Ti1−xAlxN thin films with different Al content were deposited by magnetron sputtering. The combination of electron energy loss spectroscopy (EELS) and energy dispersive spectroscopy (EDS) was used to evaluate the composition of the coatings. The effect of Al content on the morphology and properties of the coatings was investigated. High resolution electron microscopy and related techniques revealed the formation of a pillared moth-eye-like nanostructure with variable size and distribution of meso- and nano-columns and different degree of open porosity that depends on the Al content on the coating. For low Al content (x ≤ 0.21) c-(Ti,Al)N highly porous columns ending in a sharp pyramidal shape present low reflectivity and high hydrophobicity. While the precipitation of h-AlN phase at the column boundaries for x = 0.71 suppresses the c-(Ti,Al)N columnar growth and produces a smother surface, with higher reflectivity and less hydrophobic character., Authors thank the financial support from EC (REGPOT AL-NANOFUNC), CSIC (201060I41 and 201060E102), Spanish Ministry MICINN (Consolider FUNCOAT) and Junta de Andalucía., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Investigation of the growth mechanisms of a-CH x coatings deposited by pulsed reactive magnetron sputtering

  • López-Santos, Carmen
  • Colaux, Julien L.
  • González, J. C
  • Lucas, S
The study of the growth mechanisms of amorphous hydrogenated carbon coatings (a-CH x) deposited by reactive pulsed magnetron discharge in Ar + C 2H 2, Ar + H 2, and Ar + C 2H 2 + H 2 low-pressure atmospheres is presented in this work. Hydrogen-containing species of the reactant gas affect the microstructure and surface properties of the a-CH x thin films. The dynamic scaling theory has been used to relate the main reactive species involved in the deposition process to the growth mechanisms of the thin film by means of the analysis of the roughness evolution. Anomalous scaling effects have been observed in smooth a-CH x coatings. Dynamic scaling exponents α, β, and z indicate a general growth controlled by surface diffusion mechanisms. Hydrogen species have an influence on the lateral growth of the a-CH x coatings and are involved in the development of a polymeric-like structure. Meanwhile, hydrocarbon species promote the generation of higher aggregates, which increases the roughness of a more sp 2 clustering structure of the a-CH x coating. © 2012 American Chemical Society., This work was partially supported by the Belgian Walloon Region, DG06 project TRIBOFUTUR and by the European Commission Programme FP7 REGPOT-CT-2011-285895, AL-NANOFUNC. We thank Pf. D. Bonifazi from the Department of Chemistry, University of Namur (FUNDP), for the access to the AFM equipment., Peer reviewed, Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Behaviour of Au-citrate nanoparticles in seawater and accumulation in bivalves at environmentally relevant concentrations

  • García-Negrete, C. A.
  • Blasco, Javier
  • Volland, Moritz
  • Rojas, T. Cristina
  • Hampel, Miriam
  • Lapresta-Fernández, A.
  • Jiménez de Haro, María del Carmen
  • Soto, Manu
  • Fernández-Camacho, A.
8 páginas, 1 tabla, 5 figuras, The degree of aggregation and/or coalescence of Au-citrate nanoparticles (AuNPs, mean size 21.5 ± 2.9 nm), after delivery in simulated seawater, are shown to be concentration-dependent. At low concentrations no coalescence and only limited aggregation of primary particles were found. Experiments were performed in which the marine bivalve (Ruditapes philippinarum) was exposed to AuNPs or dissolved Au and subsequently, bivalve tissues were studied by Scanning and Transmission Electron Microscopy and chemical analyses. We show that the bivalve accumulates gold in both cases within either the digestive gland or gill tissues, in different concentrations (including values of predicted environmental relevance). After 28 days of exposure, electron-dense deposits (corresponding to AuNPs, as proven by X-ray microanalysis) were observed in the heterolysosomes of the digestive gland cells. Although non-measurable solubility of AuNPs in seawater was found, evidence is presented of the toxicity produced by Au3+ dissolved species (chloroauric acid solutions) and its relevance is discussed., The authors gratefully acknowledge financial support from the Junta de Andalucía (FEDER PE2009-FQM-4554, TEP-217) and EU FP7 AL-NANOFUNC project (CT-REGPOT2011-1-285895). We would like to thank A. Fernández-Estefane of CITIUS for the preparation of TEM samples. We also thank ICMS and CITIUS for Electron Microscopy facilities., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Characterisation of Co@Fe3O4 core@shell nanoparticles using advanced electron microscopy

  • Knappett, Benjamin R.
  • Abdulkin, Pavel
  • Ringe, Emilie
  • Jefferson, David A.
  • Lozano-Pérez, Sergio
  • Rojas, T. Cristina
  • Fernández-Camacho, A.
  • Wheatley, Andrew E.H.
8 páginas, 11 figuras, Cobalt nanoparticles were synthesised via the thermal decomposition of Co2(CO)8 and were coated in iron oxide using Fe(CO)5. While previous work focused on the subsequent thermal alloying of these nanoparticles, this study fully elucidates their composition and core@shell structure. State-of-the-art electron microscopy and statistical data processing enabled chemical mapping of individual particles through the acquisition of energy-filtered transmission electron microscopy (EFTEM) images and detailed electron energy loss spectroscopy (EELS) analysis. Multivariate statistical analysis (MSA) has been used to greatly improve the quality of elemental mapping data from core@shell nanoparticles. Results from a combination of spatially resolved microanalysis reveal the shell as Fe3O4 and show that the core is composed of oxidatively stable metallic Co. For the first time, a region of lower atom density between the particle core and shell has been observed and identified as a trapped carbon residue attributable to the organic capping agents present in the initial Co nanoparticle synthesis., This work was partly carried out with the support of the Karlsruhe Nano Micro Facility (KNMF, http://www.kit.edu/knmf), a Helmholtz Research Infrastructure at Karlsruhe Institute of Technology (KIT, http://www.kit.edu) and the authors wish to thank Drs Christian Kübel and Di Wang for assistance with data acquisition. They also gratefully acknowledge financial support from The Junta de Andalucía (FEDER PE2009-FQM-4554, TEP-217) and EU FP7 AL-NANOFUNC project (CT-REGPOT2011-1-285895). B. R. K. thanks the UK EPSRC, The University of Cambridge and Downing College for grants. E. R. acknowledges support from the Royal Society in the form of a Newton International Fellowship. The authors also thank the Unit of Information Resources for Research (URICI-CSIC) for the co-financing of this publication in Open Access., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A new bottom-up methodology to produce silicon layers with a closed porosity nanostructure and reduced refractive index

  • Godinho, Vanda
  • Caballero-Hernández, J.
  • Jamon, D.
  • Rojas, T. Cristina
  • Schierholz, R.
  • García López, J.
  • Ferrer, F. J.
  • Fernández-Camacho, A.
Open Access articles are published under the Creative Commons Attribution-Unported (CC-BY) 3.0 license., A new approach is presented to produce amorphous porous silicon coatings (a-pSi) with closed porosity by magnetron sputtering of a silicon target. It is shown how the use of He as the process gas at moderated power (50–150 W RF) promotes the formation of closed nanometric pores during the growth of the silicon films. The use of oblique-angle deposition demonstrates the possibility of aligning and orientating the pores in one direction. The control of the deposition power allows the control of the pore size distribution. The films have been characterized by a variety of techniques, including scanning and transmission electron microscopy, electron energy loss spectroscopy, Rutherford back scattering and x-ray photoelectron spectroscopy, showing the incorporation of He into the films (most probably inside the closed pores) and limited surface oxidation of the silicon coating. The ellipsometry measurements show a significant decrease in the refractive index of porous coatings (n500 nm = 3.75) in comparison to dense coatings (n500 nm = 4.75). The capability of the method to prepare coatings with a tailored refractive index is therefore demonstrated. The versatility of the methodology is shown in this paper by preparing intrinsic or doped silicon and also depositing (under DC or RF discharge) a-pSi films on a variety of substrates, including flexible materials, with good chemical and mechanical stability. The fabrication of multilayers of silicon films of controlled refractive index in a simple (one-target chamber) deposition methodology is also presented., The authors are grateful for the financial support from EC (project REGPOT AL-NANOFUNC grant number REGPOTCT-2011-285895-Al-NANOFUNC), CSIC (201160E091, 201060E102) and Spanish Ministry MICINN (CONSOLIDER FUNCOAT)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Characterization and validation of a-Si magnetron-sputtered thin films as solid He targets with high stability for nuclear reactions

  • Godinho, Vanda
  • Ferrer, F. J.
  • Fernández-Martínez, Begoña
  • Caballero-Hernández, J.
  • Gómez-Camacho, Joaquín
  • Fernández-Camacho, A.
In this work, we present our magnetron sputtering based methodology to produce amorphous silicon coatings with closed porosity, as a strategy to fabricate solid helium targets, in the form of supported or self-supported thin films, for nuclear reactions. We show how by changing the He working pressure it is possible to obtain highly porous homogeneous structures incorporating different He amounts. These porous coatings (a-Si:He) are very reproducible from run to run, and the high He amount incorporated makes them excellent candidates for solid He targets. The possibility of producing self-supported films is illustrated here, and its potential use in inverse kinematics experiments with radioactive beams is shown through the dispersion in forward geometry of a stable 6Li beam. Also the elastic scattering cross-sections for proton from helium were determined using an a-Si:He coating. The results agree well with the ones reported in the literature. These two examples validate our coatings as good candidates to be used as solid He targets in nuclear reactions. The stability of He inside the coatings, fundamental for its use as solid He targets, was investigated, both over time and after irradiation. The coatings proved to be very stable, and the amount of He inside the pores remains unaltered at least 2 years after deposition and after high irradiation fluence (5 × 1017 particles/cm2; with a dose rate of 5 × 1012 particles/(cm2 s))., This work was supported by the Spanish Ministry MINECO (projects FPA2013-47327-C2-1-R and MAT2015-69035-REDC), the CSIC (PIE 201460E018) and the EU 7FP (Project Al-NanoFunc CT-REGPOT-2011-285895) and the OpenAIRE FP7 Post-grant open access pilot program for open access publication funding., USD 2,000 APC fee funded by the EC FP7 Post-Grant Open Access Pilot, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

STEM in SEM imaging of gold nanoparticles in tissular ecotoxicity experiments

  • García-Negrete, C. A.
  • Jiménez de Haro, María del Carmen
  • Blasco, Julián
  • Soto, Manu
  • Fernández-Camacho, A.
Trabajo presentado en el 18th International Microscopy Congress (IMC-2014), celebrado enn Praga del 7 al 12 dse septiembre de 2014, Because of their prospective widespread use, gold nanoparticles (AuNPs) will certainly accountfor a considerable and persistent nanomaterial input to environmental systems. Thereforeecotoxicological risks in non target organisms associated with AuNPs are showing increasingconsideration. Location of AuNPs has been previously studied in our laboratory analyzing slicesof gills and digestive gland tissues of the bivalbe Ruditapes philippinarum after “in vivo”exposure experiments. Analysis was carried out by TEM of ultrathin tissue’s slices (80 nm)operating at 80 kV [1].In this communication we present the results of investigating the use of an “in vitro”methodology associated to the optimization of the STEM-in-SEM technique for the use of ascanning electron microscope (SEM-FEG) in transmission mode and operated at 20-30 kV.The advantages of STEM-in-SEM over TEM are discussed [2, 3]. The localization of high Znanoparticles in low Z tissue matrices is presented here by using the STEM-in-SEM coupled toEDX analysis as a powerful technique. In addition we have optimized the measurements withthe goal of working with thicker slices. The work with thick samples also avoid the NPsdisplacement during cutting and increase the possibility of finding NPs when working with lowNPs doses (environmental relevant concentrations).For the optimization of measurements conditions, the resolution in our SEM-FEG has beenestimated using Fast Fourier Transform (FFT) algorithms on specific images of our tissue slices.We have used the SMART macro running inside the “SCION Image” program under windows [4,5]. Working at magnifications over 100 kx, for slices thicknesses of 200-300 nm and operatingvoltages of 20-30 kV, leads to resolutions below 10 nm (an adequate value for analyzing AuNPsof 23 nm average diameter).Figure 1 shows a representative image of AuNPs accumulated into the gill tissues after “invitro” exposures. From the obtained images it was possible to localize AuNPs (see also Figure2) associated with vesicles (it can be a large phagosome or also exocytosis). Nanoparticleswere also found in residual bodies (exocytosis).In summary this communications presents new results for “in vitro” fast testing andSTEM-in-SEM imaging of engineered AuNPs in a tissular ecotoxicity model., The authors gratefully acknowledge financial support from the Junta de Andalucia and EU FEDER (project PE2009-FQM-4554 and TEP-217) and the EU FP7AL-NANOFUNC project (CT-REGPOT2011-1-285895)., No
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Synthesis and characterization of CuInS2 nanocrystalline semiconductor prepared by high-energy milling

  • Dutková, Erika
  • Sayagués, María Jesús
  • Brianč in, Jaroslav
  • Zorkovská, Anna
  • Bujňáková, Zdenka
  • Kováč, Jaroslav
  • Kovác, Jaroslav Jr.
  • Baláž, Peter
  • Ficeriová, Jana
Nanocrystalline CuInS particles have been synthesized from copper, indium, and sulfur powders by high-energy milling in a planetary mill in an argon atmosphere. Structural characterization of the prepared nanoparticles, including phase identification, Raman spectroscopy, specific surface area measurement, and particle size analysis were performed. The optical properties were studied using UV–Vis absorption and photoluminescence (PL) spectroscopy. The production of CuInS (JCPDS 027-0159) particles with a crystallite size of about 17.5–23.5 nm was confirmed by X-ray diffraction. The crystal structure has a tetragonal body-centered symmetry belonging to the I-42d space group. The Raman spectra also proved the formation of pure CuInS nanoparticles. TEM and HRTEM measurements revealed the presence of nanoparticles of different dimensions (10–20 nm) and their tendency to form agglomerates. The nanoparticles tend to agglomerate due to their large specific surface area. The average size of the synthesized particles was determined by photon cross-correlation spectroscopy to be in the range of 330–530 nm (bimodal size distribution). The band gap of the CuInS particles is 2 eV which is wider than that in bulk materials. The decrease in size leads to the blue-shift of the PL spectra. Therefore, CuInS nanoparticles are promising candidates for optical applications, and they have high potential in solar energy conversion., The support through the Slovak Grant Agency VEGA (projects 2/0027/14, 1/0439/13, 2/0051/14) and APVV 14-0103 is gratefully acknowledged. The authors also acknowledge the support of the European Union through the CT-2011-1-REGPOT285895 AL-NANOFUN project (Advanced Laboratory for the Nano-Analysis of novel Functional materials), for the microscopy facilities sited at the Institute of Materials Science in Seville.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Mechanochemically synthesized nanocrystalline ternary CuInSe2 chalcogenide semiconductor

  • Dutková, Erika
  • Sayagués, María Jesús
  • Kováč, Jaroslav
  • Bujňáková, Zdenka
  • Briančin, Jaroslav
  • Zorkovská, Anna
  • Baláž, Peter
  • Ficeriová, Jana
The synthesis of nanocrystalline ternary CuInSe particles prepared by high-energy milling in a planetary mill in an argon atmosphere from copper, indium and selenium was reported. CuInSe particles crystallize in the tetragonal structure with the crystallite size of about 30.5 nm. The Raman spectrum of CuInSe nanoparticles shows a strong peak at 176 cm corresponds to the A phonon mode of tetragonal CuInSe chalcopyrite. HRTEM measurements also revealed the presence of nanocrystals with the size of 10-20 nm with the tendency to form agglomerates. The optical absorption study shows that nanoparticles have direct optical band gap energy of 1.8 eV. The quantum size effect of the particles was confirmed also by PL measurement., This work was promoted by the Slovak Research and Development Agency under the contract No. APVV-14-0103. The support through the Slovak Grant Agency VEGA (projects 2/0027/14, 1/0739/16, 2/0051/14) is also thankfully acknowledged. The authors also appreciate the help of the European Regional Development Fund- project NANOCEXMAT 2 (ITMS 26220120035) and European Union through the CT-2011-1-REGPOT285895 AL-NANOFUN project (Advanced Laboratory for the Nano-Analysis of novel Functional materials), for the microscopy facilities sited in Seville.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Microstructure characterization of multifunctional As4S4/Fe3O4 nanocomposites prepared by high-energy mechanical milling

  • Shpotyuk, O.
  • Bujnáková, Z.
  • Sayagués, María Jesús
  • Baláž, Peter
  • Ingram, A.
  • Shpotyuk, Y.
  • Demchenko, P.
Multifunctional AsS/FeO nanocomposites prepared by high-energy mechanical milling are probed by complementary methods of positron annihilation lifetime (PAL) spectroscopy, supported by microstructure characterization using X-ray powder diffraction (XRPD) with analysis applied to the first sharp diffraction peak (FSDP), morphology studies by transmission electron microscopy (TEM) with energy-dispersive spectroscopy (EDS) and high-resolution TEM (HRTEM). These nanocomposites are shown to consist of FeO crystallites with particle sizes of 8–21 nm, and far-separated β-AsS crystallites surrounded by amorphous As-S phase. In respect to PAL data, the effect of milling is identified as possible conversion from Ps traps to positron-trapping sites depending on preferential chemistry of atomic surrounding. So, the interfacial triple junctions at the intersections of FeO crystallites are identified as principal positron traps in AsS/FeO nanocomposites with competitive influence from free-volume defects of amorphous As-S phase., This work was supported by the Slovak Research and Development Agency under the contract no. APVV-14-0103 and Slovak Grant Agency VEGA (project 2/0027/14). YaSh is grateful to SAIA, supporting this research within National Scholarship Program of the Slovak Republic. European Union through the CT-2011-1-REGPOT285895 AL-NANOFUN project (Advanced Laboratory for the Nano-Analysis of novel Functional materials), for the microscopy facilities sited in Seville is also gratefully acknowledged.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Mechanosynthesis of Sr1-xLaxTiO3 anodes for SOFCs: Structure and electrical conductivity

  • Sayagués, María Jesús
  • Gotor, F.J.
  • Pueyo, M.
  • Poyato, Rosalía
  • García-García, Francisco J.
SrLaTiO (SLT; 0 ≤ x ≤ 0.5) powder samples were synthesised at room temperature by a mechanochemical method from SrO, LaO and TiO mixtures in 90 min. The obtained SLT samples as potential anode materials in solid oxide fuel cells (SOFCs) were investigated. The microstructure, electrical conductivity and chemical compatibility with yttria-stabilised zirconia (YSZ) were studied. The powder samples had a nanometric character after milling. After a subsequently heating at 900 °C, the particle size slightly increased, but still remained nanometric. At this high temperature, a good chemical compatibility with YSZ was found. The x = 0.2 sample gave the best electrical conductivity values, i.e. 0.23 W cm. These features make such as-obtained samples good candidates to be used as anodes in SOFCs., The European Union through the CT-2011-1-REGPOT285895 AL-NANOFUN project (Advanced Laboratory for the Nano-Analysis of novel Functional materials), for the microscopy facilities sited in Seville is gratefully acknowledged. The research leading to these results has received funding from the European Regional Development Funds program (EU-FEDER) and the European Union's Seventh Framework Programme (FP7/2007–2013) for the Fuel Cells and Hydrogen Joint Technology Initiative under the T-CELL project with grant agreement n° 298300. Support from the MINECO (Spain) Juan de la Cierva Programme with grant FPDI-2013-18621 is also acknowledged.