Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 3
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Systematic design and experimental demonstration of bianisotropic metasurfaces for scattering-free manipulation of acoustic wavefronts

  • Li, Junfei
  • Shen, Chen
  • Tretyakov, Sergei
  • Cummer, Steven
  • Diaz Rubio, Ana|||0000-0002-0115-1834
[EN] Recent advances in gradient metasurfaces have shown that by locally controlling the bianisotropic response of the cells one can ensure full control of refraction, that is, arbitrarily redirect the waves without scattering into unwanted directions. In this work, we propose and experimentally verify the use of an acoustic cell architecture that provides enough degrees of freedom to fully control the bianisotropic response and minimizes the losses. The versatility of the approach is shown through the design of three refractive metasurfaces capable of redirecting a normally incident plane wave to 60 degrees, 70 degrees, and 80 degrees on transmission. The efficiency of the bianisotropic designs is over 90%, much higher than the corresponding generalized Snell's law based designs (81%, 58%, and 35%). The proposed strategy opens a new way of designing practical and highly efficient bianisotropic metasurfaces for different functionalities, enabling nearly ideal control over the energy flow through thin metasurfaces., This work was supported by the Multidisciplinary University Research Initiative grant from the Office of Naval Research (N00014-13-1-0631), an Emerging Frontiers in Research and Innovation grant from the National Science Foundation (Grant Number 1641084), and in part by the Academy of Finland (project 287894 and 309421).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Perfect control of reflection and refraction using spatially dispersive metasurfaces

  • Asadchy, V.S.
  • Albooyeh, M.
  • Tcvetkova, S. N.
  • Ra'di, Y.
  • Tretyakov, S.A.
  • Diaz Rubio, Ana|||0000-0002-0115-1834
[EN] Nonuniform metasurfaces (electrically thin composite layers) can be used for shaping refracted and reflected electromagnetic waves. However, known design approaches based on the generalized refraction and reflection laws do not allow realization of perfectly performing devices: there are always some parasitic reflections into undesired directions. In this paper we introduce and discuss a general approach to the synthesis of metasurfaces for full control of transmitted and reflected plane waves and show that perfect performance can be realized. The method is based on the use of an equivalent impedance matrix model which connects the tangential field components at the two sides on the metasurface. With this approach we are able to understand what physical properties of the metasurface are needed in order to perfectly realize the desired response. Furthermore, we determine the required polarizabilities of the metasurface unit cells and discuss suitable cell structures. It appears that only spatially dispersive metasurfaces allow realization of perfect refraction and reflection of incident plane waves into arbitrary directions. In particular, ideal refraction is possible only if the metasurface is bianisotropic (weak spatial dispersion), and ideal reflection without polarization transformation requires spatial dispersion with a specific, strongly nonlocal response to the fields., This work was supported in part by the Academy of Finland (Project No. 287894).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

The AMP-Foot 3, new generation propulsive prosthetic feet with explosive motion characteristics: design and validation

  • Cherelle, Pierre
  • Grosu, Victor
  • Cestari, Manuel
  • Vanderborght, Bram
  • Lefeber, Dirk
The last decades, rehabilitation has become a challenging context for mechatronical engineering. From the state-of-the-art it is seen that the field of prosthetics offers very promising perspectives to roboticist. Today’s prosthetic feet tend to improve amputee walking experience by delivering the necessary push-off forces while walking. Therefore, several new types of (compliant) actuators are developed in order to fulfill the torque and power requirements of a sound ankle-foot complex with minimized power consumption. At the Vrije Universiteit Brussel, the Robotics and Multibody Mechanics research group puts a lot of effort in the design and development of new bionic feet. In 2013, the Ankle Mimicking Prosthetic (AMP-) Foot 2, as a proof-of-concept, showed the advantage of using the explosive elastic actuator capable of delivering the full ankle torques ( $$\pm 120$$ ± 120  Nm) and power ( $$\pm 250$$ ± 250 W) with only a 60 W motor. In this article, the authors present the AMP-Foot 3, using an improved actuation method and using two locking mechanisms for improved energy storage during walking. The article focusses on the mechanical design of the device and validation of its working principle., This work and the publication costs of this article have been funded by the European Commissions 7th Framework Program as part of the project Cyberlegs under grant no. 287894 and by the European Commission ERC Starting grant SPEAR under grant no. 337596., Peer reviewed