Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 6
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Development length of prestressing strands in pretensioned geopolymer concrete beams

  • Li, Teng
  • Ma, Gao
  • Shi, Caijun
  • Navarro-Gregori, Juan|||0000-0002-6319-7029
  • Martí Vargas, José Rocío|||0000-0003-1665-2348
[EN] Geopolymers constitute a feasible alternative to ordinary Portland cement, as they involve a lower environmental footprint. Consequently, geopolymer concrete (GC) has emerged as a sustainable structural engineering material. Research has been conducted on GC in reinforced concrete structures, but its use in prestressed structures is not widespread, and the applicability of design provisions, such as the development length (DL) of prestressing strands, remains unverified. Thus, the objective of this paper is to contribute specific pioneering experimental DL results in GC and to assess the applicability of existing DL equations. The DLs of 12.7 and 15.2 mm Grade 270 (1860 MPa) steel strands in twelve pretensioned, prestressed concrete beams (PPCBs) cast with three different GC grades (30, 50, and 70 MPa) and with initial prestress ranging from 0.65 to 0.75fpu were determined. Three PPCBs of ordinary concrete (OC) were also tested as a reference. Flexural testing was performed twice on each PPCB with two different embedment lengths. Moment-deflection and strand end slips, together with cracking patterns and failure modes, were analyzed. The test results show that DL is closely related to concrete strength, strand diameter, and prestress level. Similar DLs were obtained in GC and OC for all concrete grades, whereas the respective transfer and flexural bond lengths can be different. A new DL equation for GC is proposed, and comparisons with predictions from existing equations are performed., This research was sponsored by the National Natural Science Foundation of China (Grant No. 51638008) , and the Huxiang Youth Talent Support Program of Hunan Province, China (2021RC3041) .
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Training Programme on Advanced ICT Tools for enhancing Enterprise Process Planning competences in Plastic Industry SMEs, Programa de capacitación sobre herramientas TIC avanzadas para mejorar las competencias de planificación de procesos empresariales en PYMES de la industria del plástico

  • Boza, Andres|||0000-0002-5429-0416
  • Cuenca, L.|||0000-0003-3589-4182
  • Sanchis, R.|||0000-0002-5495-3339
  • Poler, R.|||0000-0003-4475-6371
[EN] The identification of critical training needs related to enterprise planning activities in the sector of the plastic industry has led to the development of a training programme on advanced ICT tools for en-hancing enterprise process planning competences in the plastic industry SMEs. The main objective of this training programme is to improve relevant and high-level basic and transversal competences in a lifelong learning perspective and promote the work-based learning in all its forms, with special attention to ap-prenticeship-type training addressed to the aforementioned target sector. In light of this, this paper de-scribes the methodology used to define the training programme, the training resources developed, the se-lection criteria used to select the most adequate technology for developing the training resources and the characterization of each of the developments., The work leading to these results has received funding from the European Union Erasmus+ Programme under grant No. 2016-1-ES01-KA202-025686 "Development of a Training Programme on Advanced ICT Tools for enhancing Manufacturing Process Planning competences in Plastic Industries SMEs" (ICTPlast).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Evaluation of transfer length in pretensioned geopolymer concrete beams

  • Li, Teng
  • Ma, Gao
  • Hwang, Hyeon-Jong
  • Shi, Caijun
  • Martí Vargas, José Rocío|||0000-0003-1665-2348
[EN] The emergence of geopolymer concrete (GC) is making a positive contribution to environmental sustainability in construction. However, GC has not been extensively used in prestressed structures, so the applicability of design provisions remains unverified. In particular, the use of strands in GC structures requires the determination of their transfer lengths. This paper evaluates the transfer lengths of 12.7 and 15.2 mm Grade 270 (1860 MPa) steel strands in beams cast with three different grades (30, 50 and 70 MPa). Initial prestress of 0.65-0.75fpu was applied and gradually released. The transfer lengths were measured by applying the 95 % Average Maximum Strain Method. The strain field at one beam end was also obtained using Digital Image Correlation, which provided a new way to analyze the Hoyer effect. The tests showed that the transfer length was closely related to concrete compressive strength at release, prestress level and strand diameter. Moreover, the transfer length values in GC members were similar compared to ordinary concrete members for grades 50 and 70 MPa concrete and shorter for 30 MPa GC members. Prediction results from several international design codes and existing equations were obtained, which are close or conservative compared to the experimental results., This research was sponsored by the National Natural Science Foun-dation of China (Grant No. 51638008) , the Huxiang Youth Talent Sup-port Program of Hunan Province, China (2021RC3041) .
Docta Complutense
Publicación Artículo científico (JournalArticle)

Traversable wormholes in Einstein-Dirac-Maxwell theory

  • Blázquez Salcedo, José Luis
  • Knoll, Christian
  • Radu, Eugen
We construct a specific example of a class of traversable wormholes in Einstein-Dirac-Maxwell theory in four spacetime dimensions, without needing any form of exotic matter. Restricting to a model with two massive fermions in a singlet spinor state, we show the existence of spherically symmetric asymptotically flat configurations which are free of singularities, representing localized states. These solutions satisfy a generalized Smarr relation, being connected with the extremal Reissner-Nordström black holes. They also possess a finite mass M and electric charge Q_e, with Q_e/M > 1. An exact wormhole solution with ungauged, massless fermions is also reported.
Docta Complutense
Publicación Artículo científico (JournalArticle)

Polar modes and isospectrality of Ellis-Bronnikov wormholes, Physica review D

  • Azad, Bahareh
  • Blázquez Salcedo, José Luis
  • Chew, Xiao Yan
  • Kunz, Jutta
  • Yeom, Dong-han
We consider polar perturbations of static Ellis-Bronnikov wormholes and derive the coupled set of perturbation equations for the gravitational and the scalar field. For massless wormholes the perturbations decouple, and we obtain two identical master equations for the scalar and gravitational modes, which moreover agree with the master equation for the axial modes. Consequently there is isospectrality with threefold degenerate modes. For a finite mass of the background wormhole solutions, the equations are coupled. We then obtain two distinct branches of polar quasinormal modes for a given multipole number l, associated with the presence of the two types of fields. We calculate the quasinormal mode frequencies and decay rates for the branches with l = 2, 3 and 4. For a given l the real frequencies of the two branches get the closer, the higher the multipole number gets.
Docta Complutense
Publicación Artículo científico (JournalArticle)

Einstein-Maxwell-scalar black holes: the hot, the cold and the bald

  • Blázquez Salcedo, José Luis
  • Herdeiro, Carlos A.R.
  • Kunz, Jutta
  • Pombo, Alexandre M.
  • Radu, Eugen
The phenomenon of spontaneous scalarisation of charged black holes (BHs) has recently motivated studies of various Einstein-Maxwell-scalar models. Within these models, different classes of BH solutions are possible, depending on the non-minimal coupling function f(φ), between the scalar field and the Maxwell invariant. Here we consider the class wherein both the (bald) electrovacuum Reissner-Nordström (RN) BH and new scalarised BHs co-exist, and the former are never unstable against scalar perturbations. In particular we examine the model, within this subclass, with a quartic coupling function: f(φ) =1 +α(φ)4. The domain of existence of the scalarised BHs, for fixed α, is composed of two branches. The first branch (coldscalarised BHs) is continuously connected to the extremal RN BH. The second branch (hotscalarised BHs) connects to the first one at the minimum value of the charge to mass ratio and it includes overcharged BHs. We then assess the perturbative stability of the scalarised solutions, focusing on spherical perturbations. On the one hand, cold scalarised BHs are shown to be unstable by explicitly computing growing modes. The instability is quenched at both endpoints of the first branch. On the other hand, hot scalarised BHs are shown to be stable by using the S-deformation method. Thus, in the spherical sector this model possesses two stable BH local ground states (RN and hot scalarised). We point out that the branch structure of BHs in this model parallels the one of BHs in five dimensional vacuum gravity, with [Myers-Perry BHs, fat rings, thin rings] playing the role of [RN, cold scalarised, hot scalarised] BHs.