Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 15
Encontrada(s) 1 página(s)

RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

A 3D joint interpretation of magnetotelluric and seismic tomographic models: The case of the volcanic island of Tenerife

  • García-Yeguas, Araceli
  • Ledo, Juanjo
  • Piña Varas, Perla
  • Prudencio, Janire
  • Prudencio
  • Queralt, Pilar
  • Marcuello, Alex
  • Ibáñez, Jesús M.
  • Benjumea, Beatriz
  • Sánchez Alzola, Alberto
  • Pérez, Nemesio
In this work we have done a 3D joint interpretation of magnetotelluric and seismic tomography models. Previously we have described different techniques to infer the inner structure of the Earth. We have focused on volcanic regions, specifically on Tenerife Island volcano (Canary Islands, Spain). In this area, magnetotelluric and seismic tomography studies have been done separately. The novelty of the present work is the combination of both techniques in Tenerife Island. For this aim we have applied Fuzzy Clusters Method at different depths obtaining several clusters or classes. From the results, a geothermal system has been inferred below Teide volcano, in the center of Tenerife Island. An edifice hydrothermally altered and full of fluids is situated below Teide, ending at 600 m below sea level. From this depth the resistivity and VP values increase downwards. We also observe a clay cap structure, a typical feature in geothermal systems related with low resistivity and low VP values.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

An improved data integration algorithm to constrain the 3D displacement field induced by fast deformation phenomena tested on the Napa Valley earthquake

  • Polcari, Marco
  • Fernández Torres, José
  • Albano, Matteo
  • Bignami, Christian
  • Palano, Mimmo
  • Stramondo, Salvatore
In this work, we propose an improved algorithm to constrain the 3D ground displacement field induced by fast surface deformations due to earthquakes or landslides. Based on the integration of different data, we estimate the three displacement components by solving a function minimization problem from the Bayes theory. We exploit the outcomes from SAR Interferometry (InSAR), Global Positioning System (GNSS) and Multiple Aperture Interferometry (MAI) to retrieve the 3D surface displacement field. Any other source of information can be added to the processing chain in a simple way, being the algorithm computationally efficient. Furthermore, we use the intensity Pixel Offset Tracking (POT) to locate the discontinuity produced on the surface by a sudden deformation phenomenon and then improve the GNSS data interpolation. This approach allows to be independent from other information such as in-situ investigations, tectonic studies or knowledge of the data covariance matrix. We applied such a method to investigate the ground deformation field related to the 2014 Mw 6.0 Napa Valley earthquake, occurred few kilometers from the San Andreas fault system., This work has been supported by the project FIRB RBAP10ZC8K_002. Research by JF has been supported by the Spanish Ministry of Economy and Competitiveness research project ESP2013-47780-557 C2-1-R and the EU 7th FP MED-SUV project (contract 308665). It is a contribution to the Moncloa Campus of International Excellence., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Principal component analysis of MSBAS DInSAR time series from Campi Flegrei, Italy

  • Tiampo, Kristy F.
  • González, Pablo J.
  • Samsonov, Sergey
  • Fernández Torres, José
  • Camacho, Antonio G.
Because of its proximity to the city of Naples and with a population of nearly 1 million people within its caldera, Campi Flegrei is one of the highest risk volcanic areas in the world. Since the last major eruption in 1538, the caldera has undergone frequent episodes of ground subsidence and uplift accompanied by seismic activity that has been interpreted as the result of a stationary, deeper source below the caldera that feeds shallower eruptions. However, the location and depth of the deeper source is not well-characterized and its relationship to current activity is poorly understood. Recently, a significant increase in the uplift rate has occurred, resulting in almost 13 cm of uplift by 2013 (De Martino et al., 2014; Samsonov et al., 2014b; Di Vito et al., 2016). Here we apply a principal component decomposition to high resolution time series from the region produced by the advanced Multidimensional SBAS DInSAR technique in order to better delineate both the deeper source and the recent shallow activity. We analyzed both a period of substantial subsidence (1993–1999) and a second of significant uplift (2007–2013) and inverted the associated vertical surface displacement for the most likely source models. Results suggest that the underlying dynamics of the caldera changed in the late 1990s, from one in which the primary signal arises from a shallow deflating source above a deeper, expanding source to one dominated by a shallow inflating source. In general, the shallow source lies between 2700 and 3400 m below the caldera while the deeper source lies at 7600 m or more in depth. The combination of principal component analysis with high resolution MSBAS time series data allows for these new insights and confirms the applicability of both to areas at risk from dynamic natural hazards., The work of PG was supported by a Banting Postdoctoral Fellowship. This research was partially funded by the NERC project Centre for the Observation and Modelling of Earthquakes, Volcanoes and Tectonics (COMET, GA/13/M/031, http://comet.nerc.ac.uk). The work of KFT was supported by an NSERC Discovery Grant and CIRES, University of Colorado Boulder. This work also was supported by the AQUARISK Spanish project and the EU MED-SUV project., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Volcano Geodesy: Recent developments and future challenges

  • Fernández Torres, José
  • Pepe, Alessandra
  • Poland, Michael P.
  • Sigmundsson, Freysteinn
Ascent of magma through Earth's crust is normally associated with, among other effects, ground deformation and gravity changes. Geodesy is thus a valuable tool for monitoring and hazards assessment during volcanic unrest, and it provides valuable data for exploring the geometry and volume of magma plumbing systems. Recent decades have seen an explosion in the quality and quantity of volcano geodetic data. New datasets (some made possible by regional and global scientific initiatives), as well as new analysis methods and modeling practices, have resulted in important changes to our understanding of the geodetic characteristics of active volcanism and magmatic processes, from the scale of individual eruptive vents to global compilations of volcano deformation. Here, we describe some of the recent developments in volcano geodesy, both in terms of data and interpretive tools, and discuss the role of international initiatives in meeting future challenges for the field., Research by JF has been supported by the Spanish Ministry of Economy and Competitiveness research project ESP2013-47780-557 C2-1-R and the EU 7th FP MED-SUV project (contract 308665), and is a contribution to the Moncloa Campus of International Excellence., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

PAF: A software tool to estimate free-geometry extended bodies of anomalous pressure from surface deformation data

  • Camacho, Antonio G.
  • Fernández Torres, José
  • Cannavó, Flavio
We present a software package to carry out inversions of surface deformation data (any combination of InSAR, GPS, and terrestrial data, e.g., EDM, levelling) as produced by 3D free-geometry extended bodies with anomalous pressure changes. The anomalous structures are described as an aggregation of elementary cells (whose effects are estimated as coming from point sources) in an elastic half space. The linear inverse problem (considering some simple regularization conditions) is solved by means of an exploratory approach. This software represents the open implementation of a previously published methodology (Camacho et al., 2011). It can be freely used with large data sets (e.g. InSAR data sets) or with data coming from small control networks (e.g. GPS monitoring data), mainly in volcanic areas, to estimate the expected pressure bodies representing magmatic intrusions. Here, the software is applied to some real test cases., This research has been supported by the Spanish Ministry of Economy and Competitiveness grant ESP2013-47780-557-C2-1-R and the EU 7th FP MED-SUV project (contract 308665)., Peer reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Results of the eruptive column model inter-comparison study

  • Costa, Antonio
  • Suzuki, Yujiro J.
  • Cerminara, Matteo
  • Devenish, Ben J.
  • Ongaro, Tomaso E.
  • Herzog, Michael
  • van Eaton, Alexa R.
  • Denby, L. C.
  • Bursik, Marcus I.
  • Vitturi, M. de' Michieli
  • Engwell, Samantha L.
  • Neri, Augusto
  • Barsotti, Sara
  • Folch, Arnau|||0000-0002-0677-6366
  • Macedonio, Giovanni V.
  • Girault, Frédéric
  • Carazzo, Guillaume
  • Tait, Steve R.
  • Kaminski, Édouard
  • Mastin, Larry G.
  • Woodhouse, Mark J.
  • Phillips, Jeremy C.
  • Hogg, Andrew J. C.
  • Degruyter, Wim
  • Bonadonna, Constanza
To improve our understanding of the physics of volcanic plumes and their interaction with the atmosphere, increasingly sophisticated numerical models of eruptive columns have been developed by a growing number of research groups. These models are different in their design and scope, but all have the fundamental goal of characterizing the dynamics of volcanic plume formation and ultimately providing estimates of source conditions. Descriptions of volcanic columns (or plumes, we use the terms interchangeably in this paper) are important for hazard mitigation because they can be used in models that forecast the dispersion of ash and hazardous gases in the atmosphere. The accuracy of tephra dispersal forecasts is strongly dependent on the source term, which describes both the mass eruption rate of volcanic emissions and their initial vertical distribution in the atmosphere. However, until now there has not been a systematic effort to compare how these source terms are derived. For this study, we have brought together 13 different models to perform a set of simulations using the same input parameters, so that results can be meaningfully compared and evaluated. The motivation is twofold: (1) to provide a conceptual overview of what the various models can accomplish, and (2) to target specific areas for further exploration by the research community as a whole., AC was partially supported by a grant of the International Research Promotion Office Earthquake Research Institute, the University of Tokyo. AC, GM, AN, MdMV, TEO and MC were partially supported by the EU-funded project MEDiterranean SUpersite Volcanoes (MEDSUV) (grant n. 308665). AVE acknowledges NSF Postdoctoral Fellowship EAR1250029 and a USGS Mendenhall Fellowship. MIB was supported partially by NSF-IDR and AFOSR. AJH, MJW, and JCP were partially supported bythe NERC-funded projectVanaheim (grantno. NE/I01554X/1) and the EU-funded project FutureVolc (grant no. 308377). FG, GC, ST, and EK were partially supported by INSU, CNRS. We wish to thank T. Koyaguchi, S. Solovitz, and an anonymous reviewer for constructive suggestions that improved the quality of the manuscript., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

FPLUME-1.0: An integral volcanic plume model accounting for ash aggregation

  • Folch, Arnau|||0000-0002-0677-6366
  • Costa, Antonio
  • Macedonio, Giovannin
Eruption source parameters (ESP) characterizing volcanic eruption plumes are crucial inputs for atmospheric tephra dispersal models, used for hazard assessment and risk mitigation. We present FPLUME-1.0, a steady-state 1-D (one-dimensional) cross-section-averaged eruption column model based on the buoyant plume theory (BPT). The model accounts for plume bending by wind, entrainment of ambient moisture, effects of water phase changes, particle fallout and re-entrainment, a new parameterization for the air entrainment coefficients and a model for wet aggregation of ash particles in the presence of liquid water or ice. In the occurrence of wet aggregation, the model predicts an effective grain size distribution depleted in fines with respect to that erupted at the vent. Given a wind profile, the model can be used to determine the column height from the eruption mass flow rate or vice versa. The ultimate goal is to improve ash cloud dispersal forecasts by better constraining the ESP (column height, eruption rate and vertical distribution of mass) and the effective particle grain size distribution resulting from eventual wet aggregation within the plume. As test cases we apply the model to the eruptive phase-B of the 4 April 1982 El Chichón volcano eruption (México) and the 6 May 2010 Eyjafjallajökull eruption phase (Iceland). The modular structure of the code facilitates the implementation in the future code versions of more quantitative ash aggregation parameterization as further observations and experiment data will be available for better constraining ash aggregation processes., This work was partially supported by the MED-SUV Project funded by the European Union (FP7 grant agreement no. 308665). We acknowledge C. Bonadonna for providing grain size data for the Eyjafjallajökull test case. We thank T. Esposito Ongaro and two anonymous reviewer for their constructive comments., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Reconstructing the plinian and co-ignimbrite sources of large volcanic eruptions: A novel approach for the Campanian Ignimbrite

  • Marti, Alejandro
  • Folch, Arnau|||0000-0002-0677-6366
  • Costa, Antonio
  • Engwell, Samantha
The 39 ka Campanian Ignimbrite (CI) super-eruption was the largest volcanic eruption of the past 200 ka in Europe. Tephra deposits indicate two distinct plume forming phases, Plinian and co-ignimbrite, characteristic of many caldera-forming eruptions. Previous numerical studies have characterized the eruption as a single-phase event, potentially leading to inaccurate assessment of eruption dynamics. To reconstruct the volume, intensity, and duration of the tephra dispersal, we applied a computational inversion method that explicitly accounts for the Plinian and co-ignimbrite phases and for gravitational spreading of the umbrella cloud. To verify the consistency of our results, we performed an additional single-phase inversion using an independent thickness dataset. Our better-fitting two-phase model suggests a higher mass eruption rate than previous studies, and estimates that 3/4 of the total fallout volume is co-ignimbrite in origin. Gravitational spreading of the umbrella cloud dominates tephra transport only within the first hundred kilometres due to strong stratospheric winds in our best-fit wind model. Finally, tephra fallout impacts would have interrupted the westward migration of modern hominid groups in Europe, possibly supporting the hypothesis of prolonged Neanderthal survival in South-Western Europe during the Middle to Upper Palaeolithic transition., The research leading to these results has received funding from the People Programme (Marie Curie Actions) of the European Union’s Seventh Framework Programme (FP7/2007-2013) under the project NEMOH (REA grant agreement n° 289976). A.C. acknowledges the European Research Project MED-SUV (grant agreement 308665). The simulation runs were performed using the MareNostrum supercomputer at the Barcelona Supercomputing Center in Barcelona, Spain. We are extremely grateful to the BSC Scientific Visualization group for producing the artwork and multimedia included in this work; in particular we thank G. Marin, D. Garcia, F.M. Cucchietti, and L. Calvo. We thank X. Rubio and J. Zilhão for providing critical insights to the Middle to Upper Palaeolithic transition, and V.C. Smith, J.L. Pelegrí and F. Artigas for comments that greatly improved the manuscript., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Uncertainties in volcanic plume modeling: A parametric study using FPLUME

  • Macedonio, Giovanni
  • Costa, Antonio
  • Folch, Arnau|||0000-0002-0677-6366
We carry out a parametric study in order to identify and quantify the effects of uncertainties on pivotal parameters controlling the dynamics of volcanic plumes. The study builds upon numerical simulations using FPLUME, an integral steady-state model based on the Buoyant Plume Theory generalized in order to account for volcanic processes (particle fallout and re-entrainment, water phase changes, effects of wind, etc). As reference cases for strong and weak plumes, we consider the cases defined during the IAVCEI Commission on tephra hazard modeling inter-comparison study (Costa et al., 2016). The parametric study quantifies the effect of typical uncertainties on total mass eruption rate, column height, mixture exit velocity, temperature and water content, and particle size. Moreover, a sensitivity study investigates the role of wind entrainment and intensity, atmospheric humidity, water phase changes, and particle fallout and re-entrainment. Results show that the leading-order parameters that control plume height are the mass eruption rate and the air entrainment coefficient, especially for weak plumes., This work was partially supported by the MED-SUV Project funded by the European Union (FP7 Grant Agreement n.308665). AC acknowledges a grant for visiting researchers of Earthquake Research Institute, Japan. The authors warmly thank the Guest Editors of JVGR Yujiro J. Suzuki (Univ. of Tokyo, Japan) for handling the paper and for the useful suggestions. Mattia de' Michieli Vitturi and Wim Degruyter are thanked for their constructive comments that have improved the manuscript., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Beyond eruptive scenarios: assessing tephra fallout hazard from Neapolitan volcanoes

  • Sandri, Laura
  • Costa, Antonio
  • Selva, Jacopo
  • Tonini, Roberto
  • Macedonio, Giovanni
  • Folch, Arnau|||0000-0002-0677-6366
  • Sulpizio, Roberto
Assessment of volcanic hazards is necessary for risk mitigation. Typically, hazard assessment is based on one or a few, subjectively chosen representative eruptive scenarios, which use a specific combination of eruptive sizes and intensities to represent a particular size class of eruption. While such eruptive scenarios use a range of representative members to capture a range of eruptive sizes and intensities in order to reflect a wider size class, a scenario approach neglects to account for the intrinsic variability of volcanic eruptions, and implicitly assumes that inter-class size variability (i.e. size difference between different eruptive size classes) dominates over intra-class size variability (i.e. size difference within an eruptive size class), the latter of which is treated as negligible. So far, no quantitative study has been undertaken to verify such an assumption. Here, we adopt a novel Probabilistic Volcanic Hazard Analysis (PVHA) strategy, which accounts for intrinsic eruptive variabilities, to quantify the tephra fallout hazard in the Campania area. We compare the results of the new probabilistic approach with the classical scenario approach. The results allow for determining whether a simplified scenario approach can be considered valid, and for quantifying the bias which arises when full variability is not accounted for., This work was partially supported by the MED-SUV Project funded by the European Union (FP7 Grant Agreement n.308665), the “Futuro in Ricerca 2008 FIRB” ByMuR Project [RBFR0880SR] funded by MIUR (the Italian Ministry of Education, University and Research), and the DPC-INGV V1 (2013–2015) Project, funded by DPC (the Italian Department of Civil Protection) within the agreement between DPC and INGV. Background roadmap, terrain or satellite images in all the pictures were downloaded from Google Maps. The FALL3D simulations have been run at BSC using the MareNostrum supercomputer. We are very grateful to Mary Anne Thompson for providing us with helpful comments. We wish to thank the anonymous reviewers for their suggestions that significantly improved the quality of the manuscript., Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Results of the eruptive column model inter-comparison study

  • Costa, Antonio
  • Suzuki, Yujiro J.
  • Cerminara, Matteo
  • Devenish, Ben J.
  • Ongaro, Tomaso E.
  • Herzog, Michael
  • van Eaton, Alexa R.
  • Denby, L. C.
  • Bursik, Marcus I.
  • Vitturi, M. de' Michieli
  • Engwell, Samantha L.
  • Neri, Augusto
  • Barsotti, Sara
  • Folch, Arnau
  • Macedonio, Giovanni V.
  • Girault, Frédéric
  • Carazzo, Guillaume
  • Tait, Steve R.
  • Kaminski, Édouard
  • Mastin, Larry G.
  • Woodhouse, Mark J.
  • Phillips, Jeremy C.
  • Hogg, Andrew J. C.
  • Degruyter, Wim
  • Bonadonna, Constanza
To improve our understanding of the physics of volcanic plumes and their interaction with the atmosphere, increasingly sophisticated numerical models of eruptive columns have been developed by a growing number of research groups. These models are different in their design and scope, but all have the fundamental goal of characterizing the dynamics of volcanic plume formation and ultimately providing estimates of source conditions. Descriptions of volcanic columns (or plumes, we use the terms interchangeably in this paper) are important for hazard mitigation because they can be used in models that forecast the dispersion of ash and hazardous gases in the atmosphere. The accuracy of tephra dispersal forecasts is strongly dependent on the source term, which describes both the mass eruption rate of volcanic emissions and their initial vertical distribution in the atmosphere. However, until now there has not been a systematic effort to compare how these source terms are derived. For this study, we have brought together 13 different models to perform a set of simulations using the same input parameters, so that results can be meaningfully compared and evaluated. The motivation is twofold: (1) to provide a conceptual overview of what the various models can accomplish, and (2) to target specific areas for further exploration by the research community as a whole., AC was partially supported by a grant of the International Research Promotion Office Earthquake Research Institute, the University of Tokyo. AC, GM, AN, MdMV, TEO and MC were partially supported by the EU-funded project MEDiterranean SUpersite Volcanoes (MEDSUV) (grant n. 308665). AVE acknowledges NSF Postdoctoral Fellowship EAR1250029 and a USGS Mendenhall Fellowship. MIB was supported partially by NSF-IDR and AFOSR. AJH, MJW, and JCP were partially supported bythe NERC-funded projectVanaheim (grantno. NE/I01554X/1) and the EU-funded project FutureVolc (grant no. 308377). FG, GC, ST, and EK were partially supported by INSU, CNRS. We wish to thank T. Koyaguchi, S. Solovitz, and an anonymous reviewer for constructive suggestions that improved the quality of the manuscript., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Reconstructing the plinian and co-ignimbrite sources of large volcanic eruptions: A novel approach for the Campanian Ignimbrite

  • Marti, Alejandro
  • Folch, Arnau
  • Costa, Antonio
  • Engwell, Samantha
The 39 ka Campanian Ignimbrite (CI) super-eruption was the largest volcanic eruption of the past 200 ka in Europe. Tephra deposits indicate two distinct plume forming phases, Plinian and co-ignimbrite, characteristic of many caldera-forming eruptions. Previous numerical studies have characterized the eruption as a single-phase event, potentially leading to inaccurate assessment of eruption dynamics. To reconstruct the volume, intensity, and duration of the tephra dispersal, we applied a computational inversion method that explicitly accounts for the Plinian and co-ignimbrite phases and for gravitational spreading of the umbrella cloud. To verify the consistency of our results, we performed an additional single-phase inversion using an independent thickness dataset. Our better-fitting two-phase model suggests a higher mass eruption rate than previous studies, and estimates that 3/4 of the total fallout volume is co-ignimbrite in origin. Gravitational spreading of the umbrella cloud dominates tephra transport only within the first hundred kilometres due to strong stratospheric winds in our best-fit wind model. Finally, tephra fallout impacts would have interrupted the westward migration of modern hominid groups in Europe, possibly supporting the hypothesis of prolonged Neanderthal survival in South-Western Europe during the Middle to Upper Palaeolithic transition., The research leading to these results has received funding from the People Programme (Marie Curie Actions) of the European Union’s Seventh Framework Programme (FP7/2007-2013) under the project NEMOH (REA grant agreement n° 289976). A.C. acknowledges the European Research Project MED-SUV (grant agreement 308665). The simulation runs were performed using the MareNostrum supercomputer at the Barcelona Supercomputing Center in Barcelona, Spain. We are extremely grateful to the BSC Scientific Visualization group for producing the artwork and multimedia included in this work; in particular we thank G. Marin, D. Garcia, F.M. Cucchietti, and L. Calvo. We thank X. Rubio and J. Zilhão for providing critical insights to the Middle to Upper Palaeolithic transition, and V.C. Smith, J.L. Pelegrí and F. Artigas for comments that greatly improved the manuscript., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Uncertainties in volcanic plume modeling: A parametric study using FPLUME

  • Macedonio, Giovanni
  • Costa, Antonio
  • Folch, Arnau
We carry out a parametric study in order to identify and quantify the effects of uncertainties on pivotal parameters controlling the dynamics of volcanic plumes. The study builds upon numerical simulations using FPLUME, an integral steady-state model based on the Buoyant Plume Theory generalized in order to account for volcanic processes (particle fallout and re-entrainment, water phase changes, effects of wind, etc). As reference cases for strong and weak plumes, we consider the cases defined during the IAVCEI Commission on tephra hazard modeling inter-comparison study (Costa et al., 2016). The parametric study quantifies the effect of typical uncertainties on total mass eruption rate, column height, mixture exit velocity, temperature and water content, and particle size. Moreover, a sensitivity study investigates the role of wind entrainment and intensity, atmospheric humidity, water phase changes, and particle fallout and re-entrainment. Results show that the leading-order parameters that control plume height are the mass eruption rate and the air entrainment coefficient, especially for weak plumes., This work was partially supported by the MED-SUV Project funded by the European Union (FP7 Grant Agreement n.308665). AC acknowledges a grant for visiting researchers of Earthquake Research Institute, Japan. The authors warmly thank the Guest Editors of JVGR Yujiro J. Suzuki (Univ. of Tokyo, Japan) for handling the paper and for the useful suggestions. Mattia de' Michieli Vitturi and Wim Degruyter are thanked for their constructive comments that have improved the manuscript., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Beyond eruptive scenarios: assessing tephra fallout hazard from Neapolitan volcanoes

  • Sandri, Laura
  • Costa, Antonio
  • Selva, Jacopo
  • Tonini, Roberto
  • Macedonio, Giovanni
  • Folch, Arnau
  • Sulpizio, Roberto
Assessment of volcanic hazards is necessary for risk mitigation. Typically, hazard assessment is based on one or a few, subjectively chosen representative eruptive scenarios, which use a specific combination of eruptive sizes and intensities to represent a particular size class of eruption. While such eruptive scenarios use a range of representative members to capture a range of eruptive sizes and intensities in order to reflect a wider size class, a scenario approach neglects to account for the intrinsic variability of volcanic eruptions, and implicitly assumes that inter-class size variability (i.e. size difference between different eruptive size classes) dominates over intra-class size variability (i.e. size difference within an eruptive size class), the latter of which is treated as negligible. So far, no quantitative study has been undertaken to verify such an assumption. Here, we adopt a novel Probabilistic Volcanic Hazard Analysis (PVHA) strategy, which accounts for intrinsic eruptive variabilities, to quantify the tephra fallout hazard in the Campania area. We compare the results of the new probabilistic approach with the classical scenario approach. The results allow for determining whether a simplified scenario approach can be considered valid, and for quantifying the bias which arises when full variability is not accounted for., This work was partially supported by the MED-SUV Project funded by the European Union (FP7 Grant Agreement n.308665), the “Futuro in Ricerca 2008 FIRB” ByMuR Project [RBFR0880SR] funded by MIUR (the Italian Ministry of Education, University and Research), and the DPC-INGV V1 (2013–2015) Project, funded by DPC (the Italian Department of Civil Protection) within the agreement between DPC and INGV. Background roadmap, terrain or satellite images in all the pictures were downloaded from Google Maps. The FALL3D simulations have been run at BSC using the MareNostrum supercomputer. We are very grateful to Mary Anne Thompson for providing us with helpful comments. We wish to thank the anonymous reviewers for their suggestions that significantly improved the quality of the manuscript., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

FPLUME-1.0: An integral volcanic plume model accounting for ash aggregation

  • Folch, Arnau
  • Costa, Antonio
  • Macedonio, Giovannin
Eruption source parameters (ESP) characterizing volcanic eruption plumes are crucial inputs for atmospheric tephra dispersal models, used for hazard assessment and risk mitigation. We present FPLUME-1.0, a steady-state 1-D (one-dimensional) cross-section-averaged eruption column model based on the buoyant plume theory (BPT). The model accounts for plume bending by wind, entrainment of ambient moisture, effects of water phase changes, particle fallout and re-entrainment, a new parameterization for the air entrainment coefficients and a model for wet aggregation of ash particles in the presence of liquid water or ice. In the occurrence of wet aggregation, the model predicts an effective grain size distribution depleted in fines with respect to that erupted at the vent. Given a wind profile, the model can be used to determine the column height from the eruption mass flow rate or vice versa. The ultimate goal is to improve ash cloud dispersal forecasts by better constraining the ESP (column height, eruption rate and vertical distribution of mass) and the effective particle grain size distribution resulting from eventual wet aggregation within the plume. As test cases we apply the model to the eruptive phase-B of the 4 April 1982 El Chichón volcano eruption (México) and the 6 May 2010 Eyjafjallajökull eruption phase (Iceland). The modular structure of the code facilitates the implementation in the future code versions of more quantitative ash aggregation parameterization as further observations and experiment data will be available for better constraining ash aggregation processes., This work was partially supported by the MED-SUV Project funded by the European Union (FP7 grant agreement no. 308665). We acknowledge C. Bonadonna for providing grain size data for the Eyjafjallajökull test case. We thank T. Esposito Ongaro and two anonymous reviewer for their constructive comments., Peer Reviewed, Postprint (published version)