Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 11
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Evolution of the Properties of a Poly(L-lactic acid) Scaffold with Double Porosity During In Vitro Degradation in a Phosphate-Buffered Saline Solution

  • Deplaine, Harmony
  • Acosta-Santamaría, Victor A.
  • Doblare Castellano, Manuel
  • Ochoa-Garrido, Ignacio
  • Vidaurre, Ana|||0000-0003-3394-1176
  • Gómez Ribelles, José Luís|||0000-0001-9099-0885
  • Gallego-Ferrer, Gloria|||0000-0002-2428-0903
[EN] A poly(L-lactic acid) scaffold prepared by a combination of freeze-extraction and porogen-leaching methods was submitted to static degradation in a phosphate-buffered saline solution at pH 7.4 and 37 C for up to 12 months. After 6 months of degradation, the scaffold maintained its integrity, although noticeable changes in its permeability and pore size were recorded. After 12 months, scanning electron microscopy pictures showed that most of the trabeculae were broken, and the sample disaggregated under minimum loading. Neither weight loss nor crystallinity changes in the first heating calorimetric scan were observed during the degradation experiment. However, after 12 months, a rise in the crystallinity from 13 to 38% and a drop in the glass-transition temperature from 58 to 54 C were measured in the second heating scan. The onset of thermal degradation moved from 300 to 210 C after 12 months. Although the elastic modulus suffered only a very slight reduction with degradation time, the aggregate modulus decreased 44% after 6 months., The authors acknowledge the support of the Instituto de Salud Carlos III, Ministerio de Economıa y Competitividad, and the European Commission through FP7-ERANet EuroNanoMed 2011 PI11/03032 and FP7-PEOPLE-2012-IAPP (contract grant number PIAP-GA-2012–324386). The Biomedical Research Networking Center in Bioengineering, Biomaterials, and Nanomedicine is an initiative funded by the VI National R&D&i Plan 2008–2011, Iniciativa Ingenio 2010, and Consolider Program. Biomedical Research Networking Center actions are financed by the Instituto de Salud Carlos III with assistance from the European Regional Development Fund. The authors also thank the Tissue Characterization Platform of the Biomedical Research Networking Center in Bioengineering, Biomaterials, and Nanomedicine for its technical support. They also thank the Linguistic Assistance Services of the Language Centre, Universitat Politecnica de Valencia, for their help in revising this article.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Biodegradable polyester networks including hydrophilic groups favor BMSCs differentiation and can be eroded by macrophage action

  • Fernández, Juan Manuel
  • Gisela Oberti, Tamara
  • Vikingsson, Line
  • Cortizo, Ana
  • Gómez Ribelles, José Luís|||0000-0001-9099-0885
[EN] The aim of this study is to show that introducing a small fraction of hydrophilic groups into a hydrophobic polyester favor the macrophage activity by accelerating the degradation action in aqueous media. It is also seen that differentiation of MSCs cultured in monolayer towards bone in specific differentiation media is favored in these materials with respect to the corresponding pristine polyesters. Polymer networks based in polycarpolactone or poly(L-lactide) and containing a small fraction of poly(-hydroxyethyl acrylate) have been synthesized. Degradation kinetics in vitro was monitored by mass loss and swelling capacity of the polymer network in good solvents, the later as representative of chain cleavage. Hydrolytic and enzymatic degradation is accelerated by the inclusion of poly(hydroxyethyl acrylate) blocks in the network. Macrophages were cultured on the surface of the network films, showing its capacity to erode the material surface but also to accelerate bulk degradation. Bone marrow mesenchymal stem cells were cultured in monolayer on the membranes in osteogenic media, showing an increase of specific markers expression in comparison to pristine polyesters., JLGR acknowledges the support of Ministerio de Educacion, through the grant PR2011-0222 of Programa Nacional de Movilidad de Recursos Humanos del Plan Nacional de I-D+i 2008-2011 for a stay in la Universidad Nacional de La Plata while part of the work was developed and the European Commission through FP7-ERANet EuroNanoMed 2011 PI11/03032 and FP7-PEOPLE-2012-IAPP (contract grant number PIAP-GA-2012-324386). CIBER-BBN is an initiative funded by the VI National R&D&i Plan 2008-2011, Iniciativa Ingenio 2010, Consolider Program, CIBER Actions and financed by the Instituto de Salud Carlos III with assistance from the European Regional Development Fund. JMF acknowledges the support of Ministerio de Ciencia, Tecnologia e Innovation Productiva and Agencia Nacional de Ciencia y Tecnologia (PICT 2012-1977. Prestamo BID). TGO and JMF are members of the Carrera del Investigador, CONICET, AMC is a member of the Carrera del Investigador, CICPBA.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Crosslinked fibrin gels for tissue engineering: Two approaches to improve their properties

  • Gamboa-Martinez, Tatiana Carolina
  • Luque-Guillen, Victoria
  • González-García, Cristina
  • Gómez Ribelles, José Luís|||0000-0001-9099-0885
  • Gallego-Ferrer, Gloria|||0000-0002-2428-0903
[EN] Fibrin is a protein that can be used as an ideal scaffolding material to promote tissue regeneration. In order to enhance its physical properties in this study a natural crosslinker, genipin (GP), was employed with the aim to obtain a hydrogel with tuneable properties for tissue engineering applications. The fibrin gel was crosslinked by two different methods using four concentrations of GP to get a stable hydrogel network. Crosslinking density, mechanical properties, swelling, and enzymatic degradation of the hydrogels were tested for each GP content and method employed. The method I: Crosslinking after gel formation promotes a high crosslinking and retains the gel shape for long term whilst the method II: Simultaneous gel formation and crosslinking improves the mechanical properties of the gel. This study confirms the use of GP at different concentrations as a suitable crosslinker of fibrin that promotes the cellular viability of L929 for 21 days of in vitro culture., Contract grant sponsor: Ciber-BBN, Instituto de Salud Carlos III, European Regional Development Fund
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Differentiation of Human Mesenchymal Stem Cells Toward Quality Cartilage Using Fibrinogen-Based Nanofibers

  • Forget, Jeremy
  • Awaja, Firas
  • Gugutkov, Dencho
  • Gustavsson, Juhan
  • Coelho-Sampaio, Tatiana
  • Hochman-Mendez, Camila
  • Salmerón Sánchez, Manuel
  • Altankov, George
  • Gallego-Ferrer, Gloria|||0000-0002-2428-0903
[EN] Mimicking the complex intricacies of the extra cellular matrix including 3D configurations and aligned fibrous structures were traditionally perused for producing cartilage tissue from stem cells. This study shows that human adipose derived mesenchymal stem cells (hADMSCs) establishes significant chondrogenic differentiation and may generate quality cartilage when cultured on 2D and randomly oriented fibrinogen/poly-lactic acid nanofibers compared to 3D sandwich-like environments. The adhering cells show well-developed focal adhesion complexes and actin cytoskeleton arrangements confirming the proper cellular interaction with either random or aligned nanofibers. However, quantitative reverse transcription-polymerase chain reaction analysis for Collagen 2 and Collagen 10 genes expression confirms favorable chondrogenic response of hADMSCs on random nanofibers and shows substantially higher efficacy of their differentiation in 2D configuration versus 3D constructs. These findings introduce a new direction for cartilage tissue engineering through providing a simple platform for the routine generation of transplantable stem cells derived articular cartilage replacement that might improve joint function., This work was supported by CIBER-BBN Spain (project BIOSURFACES), and the European Commission through the FP7 Industry-Academia Partnerships and Pathways (IAPP) project FIBROGELNET. The valuable support of the project MAT 2015-69315-C3 MYOHEAL, funded by Spanish Ministry of Science and Innovation is also acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Osteogenic differentiation of mesenchymal stem cells using hybrid nanofibers with different configurations and dimensionality

  • Gugutkov, Dencho
  • Awaja, Firas
  • Belemezova, Kalina
  • Keremidarska, Milena
  • Krasteva, Natalia
  • Kyurkchiev, Stanimir
  • Seker, Sukran
  • Elcin, Ayse Eser
  • Elçin, Yasar Murat
  • Altankov, George
  • Gallego-Ferrer, Gloria|||0000-0002-2428-0903
[EN] Novel, hybrid fibrinogen/polylactic acid (FBG/PLA) nanofibers with different configuration (random vs aligned) and dimensionality (2¿D vs 3¿D environment) were used to control the overall behavior and the osteogenic differentiation of human adipose¿derived mesenchymal stem cells (ADMSCs). Aligned nanofibers in both the 2¿D and 3¿D configurations are proved to be favored for osteodifferentiation. Morphologically, we found that on randomly configured nanofibers, the cells developed a stellate¿like morphology with multiple projections; however, time¿lapse analysis showed significantly diminished cell movements. Conversely, an elongated cell shape with advanced cell spreading and extended actin cytoskeleton accompanied with significantly increased cell mobility were observed when cells attached on aligned nanofibers. Moreover, a clear tendency for higher alkaline phosphatase activity was also found on aligned fibers when ADMSCs were switched to osteogenic induction medium. The strongest accumulation of Alizarin red (AR) and von Kossa stain at 21 days of culture in osteogenic medium were found on 3¿D aligned constructs while the rest showed lower and rather undistinguishable activity. Quantitative reverse transcription¿polymerase chain reaction analysis for Osteopontin (OSP) and RUNX 2 generally confirmed this trend showing favorable expression of osteogenic genes activity in 3¿D environment particularly in aligned configuration., Contract grant sponsor: CIBER-BBN Spain (project BIOSURFACES) Contract grant sponsor: European Commission through the FP7 Industry-Academia Partnerships and Pathways (IAPP) project FIBROGELNET; contract grant number: PAP-GA-2012-324386 Contract grant sponsor: Spanish Ministry of Economy and Competitiveness; contract grant number: MAT 2015-69315-C3 MYOHEAL Contract grant sponsor: The Scientific and Technological Research Council of Turkey (TUBITAK); contract grant number: 11S497
Dipòsit Digital de la UB
Publicación Artículo científico (JournalArticle)

Molecular composition of GAG-collagen I multilayers affects remodeling of terminal layers and osteogenic differentiation of adipose-derived stem cells

  • Zhao, Mingyan
  • Altankov, George
  • Grabiec, Urszula
  • Bennett, Mark
  • Salmeron-Sanchez, Manuel
  • Dehghani, Faramarz
  • Groth, Thomas
The effect of molecular composition of multilayers, by pairing type I collagen (Col I) with either hyaluronic acid (HA) or chondroitin sulfate (CS) was studied regarding the osteogenic differentiation of adhering human adipose-derived stem cells (hADSCs). Polyelectrolyte multilayer (PEM) formation was based primarily on ion pairing and on additional intrinsic cross-linking through imine bond formation with Col I replacing native by oxidized HA (oHA) or CS (oCS). Significant amounts of Col I fibrils were found on both native and oxidized CS-based PEMs, resulting in higher water contact angles and surface potential under physiological condition, while much less organized Col I was detected in either HA-based multilayers, which were more hydrophilic and negatively charged. An important finding was that hADSCs remodeled Col I at the terminal layers of PEMs by mechanical reorganization and pericellular proteolytic degradation, being more pronounced on CS-based PEMs. This was in accordance with the higher quantity of Col I deposition in this system, accompanied by more cell spreading, focal adhesions (FA) formation and significant α2β1 integrin recruitment compared to HA-based PEMs. Both CS-based PEMs caused also an increased fibronectin (FN) secretion and cell growth. Furthermore, significant calcium phosphate deposition, enhanced ALP, Col I and Runx2 expression were observed in hADSCs on CS-based PEMs, particularly on oCS-containing one. Overall, multilayer composition can be used to direct cell-matrix interactions, and hence stem cell fates showing for the first time that PEMs made of biogenic polyelectrolytes undergo significant remodeling of terminal protein layers, which seems to enable cells to form a more adequate extracellular matrix-like environment. Statement of Significance: Natural polymer derived polyelectrolyte multilayers (PEMs) have been recently applied to adjust biomaterials to meet specific tissue demands. However, the effect of molecular composition of multilayers on both surface properties and cellular response, especially the fate of human adipose derived stem cells (hADSCs) upon osteogenic differentiation has not been studied extensively, yet. In addition, no studies exist that investigate a potential cell-dependent remodeling of PEMs made of extracellular matrix (ECM) components like collagens and glycosaminoglycans (GAGs). Furthermore, there is no knowledge whether the ability of cells to remodel PEM components may provide an added value regarding cell growth and differentiation. Finally, it has not been explored yet, how intrinsic cross-linking of ECM derived polyelectrolytes that improve the stability of PEMs will affect the differentiation potential of hADSCs. The current work aims to address these questions and found that the type of GAG has a strong effect on properties of multilayers and osteogenic differentiation of hADSCs. Additionally, we also show for the first time that PEMs made of biogenic polyelectrolytes undergo significant remodeling of terminal layers as completely new finding, which allows cells to form an ECM-like environment supporting differentiation upon osteogenic lineage. The finding of this work may open new avenues of application of PEM systems made by layer by layer (LbL) technique in tissue engineering and regenerative medicine.
Dipòsit Digital de la UB
Publicación Artículo científico (JournalArticle)

Differentiation of Human Mesenchymal Stem Cells Toward Quality Cartilage Using Fibrinogen-Based Nanofibers

  • Forget, Jeremy
  • Awaja, Firas
  • Gugutkov, Dencho
  • Gustavsson, Juhan
  • Gallego Ferrer, Gloria
  • Coelho-Sampaio, Tatiana
  • Hochman-Mendez, Camila
  • Salmeron-Sanchez, Manuel
  • Altankov, George
Mimicking the complex intricacies of the extra cellular matrix including 3D configurations and aligned fibrous structures were traditionally perused for producing cartilage tissue from stem cells. This study shows that human adipose derived mesenchymal stem cells (hADMSCs) establishes significant chondrogenic differentiation and may generate quality cartilage when cultured on 2D and randomly oriented fibrinogen/poly-lactic acid nanofibers compared to 3D sandwich-like environments. The adhering cells show well-developed focal adhesion complexes and actin cytoskeleton arrangements confirming the proper cellular interaction with either random or aligned nanofibers. However, quantitative reverse transcription-polymerase chain reaction analysis for Collagen 2 and Collagen 10 genes expression confirms favorable chondrogenic response of hADMSCs on random nanofibers and shows substantially higher efficacy of their differentiation in 2D configuration versus 3D constructs. These findings introduce a new direction for cartilage tissue engineering through providing a simple platform for the routine generation of transplantable stem cells derived articular cartilage replacement that might improve joint function.
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Fibrinogen nanofibers for guiding endothelial cell behavior

  • Gugutkov, Dencho
  • Gustavsson, Johan
  • Ginebra Molins, Maria Pau|||0000-0002-4700-5621
  • Altankov, George Petrov
This paper describes the biological consequences of presenting electrospun fibrinogen (FBG) to endothelial cells as a spatially organized nanofibrous matrix. Aligned and randomly oriented FBG nanofibers with an average diameter of less than 200 nm were obtained by electrospinning of native FBG solution. Electrophoretic profiling confirmed that the electrospun FBG resembled the native protein structure, and fluorescent tracing of FITC-labeled FBG showed that electrospun fibers withstood immersion in physiological solutions reasonably well for several days. With respect to cellular interactions, the nanofibrous FBG matrix provided better conditions for initial recognition by human umbilical vein endothelial cells compared to pre-adsorbed FBG on a flat surface. Furthermore, the spatial organization of electrospun FBG fibers presented opportunities for guiding the cellular behavior in a way that is not possible when the protein is presented in another form (e. g. adsorbed or soluble). For example, on aligned FBG fibers, cells rapidly oriented themselves along the fibers, and time-lapse recordings revealed pronounced cellular movements restricted to the fiber direction. In great contrast, on randomly deposited fibers, cells acquired a stellate-like morphology and became locally immobilized by the fibers. We also show that the FBG fiber orientation significantly influenced both the cytoskeleton organization in confluent cell layers and the orientation of the extracellular fibronectin matrix secreted by the cells. In conclusion, this study demonstrates that electrospun FBG nanofibers can be a promising tool for guiding endothelial cell behavior for tissue engineering applications.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Molecular composition of GAG-collagen I multilayers affects remodeling of terminal layers and osteogenic differentiation of adipose-derived stem cells

  • Zhao, Mingyan
  • Altankov, George
  • Grabiec, Urszula
  • Bennett, Mark
  • Salmeron-Sanchez, Manuel
  • Dehghani, Faramarz
  • Groth, Thomas
The effect of molecular composition of multilayers, by pairing type I collagen (Col I) with either hyaluronic acid (HA) or chondroitin sulfate (CS) was studied regarding the osteogenic differentiation of adhering human adipose-derived stem cells (hADSCs). Polyelectrolyte multilayer (PEM) formation was based primarily on ion pairing and on additional intrinsic cross-linking through imine bond formation with Col I replacing native by oxidized HA (oHA) or CS (oCS). Significant amounts of Col I fibrils were found on both native and oxidized CS-based PEMs, resulting in higher water contact angles and surface potential under physiological condition, while much less organized Col I was detected in either HA-based multilayers, which were more hydrophilic and negatively charged. An important finding was that hADSCs remodeled Col I at the terminal layers of PEMs by mechanical reorganization and pericellular proteolytic degradation, being more pronounced on CS-based PEMs. This was in accordance with the higher quantity of Col I deposition in this system, accompanied by more cell spreading, focal adhesions (FA) formation and significant α2β1 integrin recruitment compared to HA-based PEMs. Both CS-based PEMs caused also an increased fibronectin (FN) secretion and cell growth. Furthermore, significant calcium phosphate deposition, enhanced ALP, Col I and Runx2 expression were observed in hADSCs on CS-based PEMs, particularly on oCS-containing one. Overall, multilayer composition can be used to direct cell-matrix interactions, and hence stem cell fates showing for the first time that PEMs made of biogenic polyelectrolytes undergo significant remodeling of terminal protein layers, which seems to enable cells to form a more adequate extracellular matrix-like environment. Statement of Significance: Natural polymer derived polyelectrolyte multilayers (PEMs) have been recently applied to adjust biomaterials to meet specific tissue demands. However, the effect of molecular composition of multilayers on both surface properties and cellular response, especially the fate of human adipose derived stem cells (hADSCs) upon osteogenic differentiation has not been studied extensively, yet. In addition, no studies exist that investigate a potential cell-dependent remodeling of PEMs made of extracellular matrix (ECM) components like collagens and glycosaminoglycans (GAGs). Furthermore, there is no knowledge whether the ability of cells to remodel PEM components may provide an added value regarding cell growth and differentiation. Finally, it has not been explored yet, how intrinsic cross-linking of ECM derived polyelectrolytes that improve the stability of PEMs will affect the differentiation potential of hADSCs. The current work aims to address these questions and found that the type of GAG has a strong effect on properties of multilayers and osteogenic differentiation of hADSCs. Additionally, we also show for the first time that PEMs made of biogenic polyelectrolytes undergo significant remodeling of terminal layers as completely new finding, which allows cells to form an ECM-like environment supporting differentiation upon osteogenic lineage. The finding of this work may open new avenues of application of PEM systems made by layer by layer (LbL) technique in tissue engineering and regenerative medicine.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Fibrinogen nanofibers for guiding endothelial cell behavior

  • Gugutkov, Dencho
  • Gustavsson, Johan
  • Ginebra Molins, Maria Pau
  • Altankov, George Petrov
This paper describes the biological consequences of presenting electrospun fibrinogen (FBG) to endothelial cells as a spatially organized nanofibrous matrix. Aligned and randomly oriented FBG nanofibers with an average diameter of less than 200 nm were obtained by electrospinning of native FBG solution. Electrophoretic profiling confirmed that the electrospun FBG resembled the native protein structure, and fluorescent tracing of FITC-labeled FBG showed that electrospun fibers withstood immersion in physiological solutions reasonably well for several days. With respect to cellular interactions, the nanofibrous FBG matrix provided better conditions for initial recognition by human umbilical vein endothelial cells compared to pre-adsorbed FBG on a flat surface. Furthermore, the spatial organization of electrospun FBG fibers presented opportunities for guiding the cellular behavior in a way that is not possible when the protein is presented in another form (e. g. adsorbed or soluble). For example, on aligned FBG fibers, cells rapidly oriented themselves along the fibers, and time-lapse recordings revealed pronounced cellular movements restricted to the fiber direction. In great contrast, on randomly deposited fibers, cells acquired a stellate-like morphology and became locally immobilized by the fibers. We also show that the FBG fiber orientation significantly influenced both the cytoskeleton organization in confluent cell layers and the orientation of the extracellular fibronectin matrix secreted by the cells. In conclusion, this study demonstrates that electrospun FBG nanofibers can be a promising tool for guiding endothelial cell behavior for tissue engineering applications., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Differentiation of Human Mesenchymal Stem Cells Toward Quality Cartilage Using Fibrinogen-Based Nanofibers

  • Forget, Jeremy
  • Awaja, Firas
  • Gugutkov, Dencho
  • Gustavsson, Juhan
  • Gallego Ferrer, Gloria
  • Coelho-Sampaio, Tatiana
  • Hochman-Mendez, Camila
  • Salmeron-Sanchez, Manuel
  • Altankov, George
Mimicking the complex intricacies of the extra cellular matrix including 3D configurations and aligned fibrous structures were traditionally perused for producing cartilage tissue from stem cells. This study shows that human adipose derived mesenchymal stem cells (hADMSCs) establishes significant chondrogenic differentiation and may generate quality cartilage when cultured on 2D and randomly oriented fibrinogen/poly-lactic acid nanofibers compared to 3D sandwich-like environments. The adhering cells show well-developed focal adhesion complexes and actin cytoskeleton arrangements confirming the proper cellular interaction with either random or aligned nanofibers. However, quantitative reverse transcription-polymerase chain reaction analysis for Collagen 2 and Collagen 10 genes expression confirms favorable chondrogenic response of hADMSCs on random nanofibers and shows substantially higher efficacy of their differentiation in 2D configuration versus 3D constructs. These findings introduce a new direction for cartilage tissue engineering through providing a simple platform for the routine generation of transplantable stem cells derived articular cartilage replacement that might improve joint function.