Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 57
Encontrada(s) 1 página(s)

Dipòsit Digital de la UB
Publicación Artículo científico (JournalArticle)

Highly Selective SAM-Nanowire Hybrid NO2 Sensor: Insight into Charge Transfer Dynamics and Alignment of Frontier Molecular Orbitals

  • Hoffmann, Martin W. G.
  • Prades García, Juan Daniel
  • Mayrhofer, Leonhard
  • Hernández Ramírez, Francisco
  • Järvi, T.T.
  • Moseler, Michael
  • Waag, Andreas
  • Shen, Hao
Selectivity and low power consumption are major challenges in the development of sophisticated gas sensor devices. A sensor system is presented that unifies selective sensor-gas interactions and energy-harvesting properties, using defined organic-inorganic hybrid materials. Simulations of chemical-binding interactions and the consequent electronic surface modulation give more insight into the complex sensing mechanism of selective gas detection.
Dipòsit Digital de la UB
Publicación Artículo científico (JournalArticle)

Facile integration of ordered nanowires in functional devices

  • Guilera Sala, Jordi
  • Fàbrega Gallego, Cristian
  • Casals Guillén, Olga
  • Hernández Ramírez, Francisco
  • Wang, Shuangzhou
  • Mathur, Sanjay
  • Udrea, Florian
  • De Luca, Andrea
  • Ali, Syed Zeeshan
  • Romano Rodríguez, Albert
  • Prades García, Juan Daniel
  • Morante i Lleonart, Joan Ramon
The integration of one-dimensional (1D) nanostructures of non-industry-standard semiconductors infunctional devices following bottom-up approaches is still an open challenge that hampers the exploita-tion of all their potential. Here, we present a simple approach to integrate metal oxide nanowires inelectronic devices based on controlled dielectrophoretic positioning together with proof of conceptdevices that corroborate their functionality. The method is flexible enough to manipulate nanowiresof different sizes and compositions exclusively using macroscopic solution-based techniques in conven-tional electrode designs. Our results show that fully functional devices, which display all the advantagesof single-nanowire gas sensors, photodetectors, and even field-effect transistors, are thus obtained rightafter a direct assembly step without subsequent metallization processing. This paves the way to lowcost, high throughput manufacturing of general-purpose electronic devices based on non-conventionaland high quality 1D nanostructures driving up many options for high performance and new low energyconsumption devices.
Dipòsit Digital de la UB
Publicación Artículo científico (JournalArticle)

Micro light plates for low-power photoactivated (gas) sensors

  • Markiewicz, Nicolai
  • Casals Guillén, Olga
  • Fàbrega Gallego, Cristian
  • Gracia, Isabel
  • Cané i Ballart, Carles
  • Wasisto, Hutomo Suryo
  • Waag, Andreas
  • Prades García, Juan Daniel
We report a miniaturized device integrating a photoactive material with a highly efficient Light Emitting Diode light source. This so-called micro light plate configuration allows for maximizing the irradiance impinging on the photoactive material, with a minimum power consumption, excellent uniformity, and accurate control of the illumination. We demonstrate these advantages with an example application: photoactivated gas sensors with a power consumption as low as 30 μW (this is 1000 times lower than the best figures reported to date). The letter also presents a quantitative model and a set of design rules to implement it in further integrated applications.
Dipòsit Digital de la UB
Publicación Contribución de congreso (ConferenceOutput)

Low-cost fabrication of zero-power metal oxide nanowire gas sensors: trends and challenges

  • Samà Monsonís, Jordi
  • Prades García, Juan Daniel
  • Casals Guillén, Olga
  • Barth, Sven
  • Gràcia Tortadés, Isabel
  • Cané i Ballart, Carles
  • Domènech Gil, Guillem
  • Hernández Ramírez, Francisco
  • Romano Rodríguez, Albert
Self-heating of metal oxide nanowires when a measuring current flows through them allows simultaneously heating the metal oxide, which is required for correct gas sensing operation, and measuring the nanowire resistance change, which is achieved from the ratio between the voltage drop at its edges and the current injected by the source measurement unit. In this way a drastic reduction of the power consumption of the gas sensor down to some μW is obtained and, additionally, it simplifies the practical operation of the devices, but the required control electronics that assures the correct and stable current flow through the device becomes much more complex. In this work the degree of maturity of this almost zero-power consuming gas detection systems based on nanowires will be shown and some recent advances in the use of nanowires mats or carbon nanofibers will be presented.
Dipòsit Digital de la UB
Publicación Artículo científico (JournalArticle)

DNA-origami-driven lithography for patterning on gold surfaces with sub-10 nm resolution

  • Gállego, Isaac
  • Manning, Brendan
  • Prades García, Juan Daniel
  • Mir Llorente, Mònica
  • Samitier i Martí, Josep
  • Eritja i Casadellà, Ramon
Sub-10 nm lithography of DNA patterns is achieved using the DNA-origami stamping method. This new strategy utilizes DNA origami to bind a preprogrammed DNA ink pattern composed of thiol-modified oligonucleotides on gold surfaces. Upon denaturation of the DNA origami, the DNA ink pattern is exposed. The pattern can then be developed by hybridization with complementary strands carrying gold nanoparticles.
Dipòsit Digital de la UB
Publicación Artículo científico (JournalArticle)

Self-heating effects in large arrangements of randomly oriented carbon nanofibers: Application to gas sensors

  • Monereo Cuscó, Oriol
  • Prades García, Juan Daniel
  • Cirera Hernández, Albert
Herein, we prove that self-heating effects occur in sensor films made of randomly oriented nanoparticles (electro-sprayed, drop-casted and paint-brushed films of carbon nanofibers). A 2-point calibration method, reliable enough to overcome the lack of reproducibility of low cost fabrication methods, is also proposed. Self-heating operation makes possible reaching temperatures up to 250 °C with power consumptions in the range of tens of mW. For certain low-temperature applications (<100 °C) typical power consumptions are as low as tens of μW. The method is suitable to modulate the response towards gases, such as humidity, NH3 or NO2. This approach overcomes the complex fabrication requirements of previous self-heating investigations and opens the door to use this effect in cost-effective devices.
Dipòsit Digital de la UB
Publicación Contribución de congreso (ConferenceOutput)

A low-cost approach to low-power gas sensors based on self-heating effects in large arrays of nanostructures

  • Monereo Cuscó, Oriol
  • Casals Guillén, Olga
  • Prades García, Juan Daniel
  • Cirera Hernández, Albert
The usual operation of a conductometric sensor device requires of an external energy source (i.e. an embedded heater). In the last years, the Joule effect in the sensing material, the so called self-heating effect, offered and alternative method to provide this energy: the probing current (or voltage) applied to measure the sensor signal also serves to heat up the sensor active film. Here, evidences of self-heating effects occurring on large arrays of nanostructures fabricated with low-cost methods are provided. The methodology is proven to be suitable to sense gases (humidity, NH3 and NO2) with low-powered heater-free devices.
Dipòsit Digital de la UB
Publicación Contribución de congreso (ConferenceOutput)

Locally grown SnO2 NWs as low power ammonia sensor

  • Samà Monsonís, Jordi
  • Barth, Sven
  • Jiménez Díaz, Román
  • Prades García, Juan Daniel
  • Casals Guillén, Olga
  • Gràcia Tortadés, Isabel
  • Cané i Ballart, Carles
  • Romano Rodríguez, Albert
Localized growth of SnO2 nanowires on top of CMOS compatible micromembranes that incorporate a buried heater and prepatterned interdigitated electrodes has been achieved that presents the advantage that it allows to easily and directly integrate the advantageous properties of quasi-one dimensional structures in an advanced electronic device by a Vapor Liquid Solid (VLS) mechanism. A NWs based sensor of this type is characterized as a low power gas sensor towards NH3 at different temperatures. Stable and reproducible response is obtained, that allows detecting concentrations below the time-weighted average exposure limit for 8 h.
Dipòsit Digital de la UB
Publicación Artículo científico (JournalArticle)

Integrated Strategy toward Self-Powering and Selectivity Tuning of Semiconductor Gas Sensors

  • Gad, Alaaeldin
  • Hoffmann, Martin W. G.
  • Casals Guillén, Olga
  • Mayrhofer, Leonhard
  • Fàbrega Gallego, Cristian
  • Caccamo, Lorenzo
  • Hernández Ramírez, Francisco
  • Mohajerani, Matin S.
  • Moseler, Michael
  • Shen, Hao
  • Waag, Andreas
  • Prades García, Juan Daniel
Inorganic conductometric gas sensors struggle to overcome limitations in high power consumption and poor selectivi-ty. Herein, recent advances in developing self-powered gas sensors with tunable selectivity are introduced. Alternative general approaches for powering gas sensors were realized via proper integration of complementary functionalities (namely; powering and sensing) in a singular heterostructure. These solar light driven gas sensors operating at room temperature without applying any additional external powering sources are comparatively discussed. The TYPE-1 gas sensor based on integration of pure inorganic interfaces (e.g. CdS/n-ZnO/p-Si) is capable of delivering a self-sustained sensing response, while it shows a non-selective interaction towards oxidizing and reducing gases. The structural and the optical merits of TYPE-1 sensor are investigated giving more insights into the role of light activation on the modu-lation of the self-powered sensing response. In the TYPE-2 sensor, the selectivity of inorganic materials is tailored through surface functionalization with self-assembled organic monolayers (SAMs). Such hybrid interfaces (e.g. SAMs/ZnO/p-Si) have specific surface interactions with target gases compared to the non-specific oxidation-reduction interactions governing the sensing mechanism of simple inorganic sensors. The theoretical modeling using density functional theory (DFT) has been used to simulate the sensing behavior of inorganic/organic/gas interfaces, revealing that the alignment of organic/gas frontier molecular orbitals with respect to the inorganic Fermi level is the key factor for tuning selectivity. These platforms open new avenues for developing advanced energy-neutral gas sensing devices and concepts.
Dipòsit Digital de la UB
Publicación Artículo científico (JournalArticle)

Continuous Live-Cell Culture Imaging and Single-Cell Tracking by Computational Lensfree LED Microscopy

  • Scholz, Gregor
  • Mariana, Shinta
  • Dharmawan, Agus Budi
  • Syamsu, Iqbal
  • Hörmann, Philipp
  • Reuse, Carsten
  • Hartmann, Jana
  • Hiller, Karsten
  • Prades García, Juan Daniel
  • Wasisto, Hutomo Suryo
  • Waag, Andreas
Continuous cell culture monitoring as a way of investigating growth, proliferation, and kinetics of biological experiments is in high demand. However, commercially available solutions are typically expensive and large in size. Digital inline-holographic microscopes (DIHM) can provide a cost-effective alternative to conventional microscopes, bridging the gap towards live-cell culture imaging. In this work, a DIHM is built from inexpensive components and applied to different cell cultures. The images are reconstructed by computational methods and the data are analyzed with particle detection and tracking methods. Counting of cells as well as movement tracking of living cells is demonstrated, showing the feasibility of using a field-portable DIHM for basic cell culture investigation and bringing about the potential to deeply understand cell motility.
Dipòsit Digital de la UB
Publicación Artículo científico (JournalArticle)

A parts per billion (ppb) sensor for NO2 with microwatt (μW) power requirements based on micro light plates

  • Casals Guillén, Olga
  • Markiewicz, Nicolai
  • Fàbrega Gallego, Cristian
  • Gràcia Tortadés, Isabel
  • Cané i Ballart, Carles
  • Wasisto, Hutomo Suryo
  • Waag, Andreas
  • Prades García, Juan Daniel
A film of gas sensitive ZnO nanoparticles has been coupled with a low-power micro light plate (μLP) to achieve a NO2-parts-per-billion conductometric gas sensor operating at room temperature. In this μLP configuration, an InGaN-based LED (emitting at 455 nm) is integrated at a few hundred nanometers distance from the sensor material, leading to sensor photoactivation with well controlled, uniform, and high irradiance conditions, and very low electrical power needs. The response curves to different NO2 concentrations as a function of the irradiance displayed a bell-like shape. Responses of 20% to 25 ppb of NO2 were already observed at irradiances of 5 mWatts·cm-2 (applying an electrical power as low as 30 μW). In the optimum illumination conditions (around 60 mWatts·cm-2, or 200 μW of electric power), responses of 94% to 25 ppb were achieved, corresponding to a lower detection limit of 1 ppb of NO2. Higher irradiance values worsened the sensor response in the parts-per-billion range of NO2 concentrations. The responses to other gases such as NH3, CO, and CH4 were much smaller, showing a certain selectivity toward NO2. The effects of humidity on the sensor response are also discussed.
Dipòsit Digital de la UB
Publicación Artículo científico (JournalArticle)

Highly Specific and Wide Range NO2 sensor with color readout

  • Fàbrega Gallego, Cristian
  • Fernández Romero, Luis
  • Monereo Cuscó, Oriol
  • Pons Balagué, Alba
  • Xuriguera Martín, María Elena
  • Casals Guillén, Olga
  • Waag, Andreas
  • Prades García, Juan Daniel
We present a simple and inexpensive method to implement a Griess-Saltzman-type reaction that combines the advantages of the liquid phase method (high specificity and fast response time) with the benefits of a solid implementation (easy to handle). We demonstrate that the measurements can be carried out using conventional RGB sensors; circumventing all the limitations around the measurement of the samples with spectrometers. We also present a method to optimize the measurement protocol and target a specific range of NO2 concentrations. We demonstrate that it is possible to measure the concentration of NO2 from 50 ppb to 300 ppm with high specificity and without modifying the Griess-Saltzman reagent.
Dipòsit Digital de la UB
Publicación Artículo científico (JournalArticle)

Site-selectively grown SnO2 NWs networks on micromembranes for efficient ammonia sensing in humid conditions

  • Samà Monsonís, Jordi
  • Barth, Sven
  • Domènech Gil, Guillem
  • Prades García, Juan Daniel
  • López, Núria (López Alonso)
  • Casals Guillén, Olga
  • Gràcia Tortadés, Isabel
  • Cané i Ballart, Carles
  • Romano Rodríguez, Albert
SnO2 NWs networks on heated micromembranes have been characterized as ammonia sensors. The approach allows achieving reproducible growth and stable and long-lasting ammonia sensors with site-specific grown SnO2 NWs. The devices have been tested both in dry and humid conditions showing response time down to two minutes. Sensors have been tested up to 1 month, only presenting variation of the base resistance with full retention of the response towards the gaseous analytes. Different concurrent sensing mechanisms have been identified relating the determined sensing kinetics with previous theoretical calculations. Specifically, oxygen dissociation seems to play a key role in the overall ammonia sensing sequence. In humid conditions, moisture reduces the response to ammonia but also lowers the activation energy of the reaction process.
Dipòsit Digital de la UB
Publicación Artículo científico (JournalArticle)

Visible Light‐Driven p-Type Semiconductor Gas Sensors Based on CaFe2O4 Nanoparticles

  • Qomaruddin
  • Casals Guillén, Olga
  • Utka, Andris
  • Granz, Tony
  • Waag, Andreas
  • Wasisto, Hutomo Suryo
  • Prades García, Juan Daniel
  • Fàbrega Gallego, Cristian
In this work, we present conductometric gas sensors based on p-type calcium iron oxide (CaFe2O4) nanoparticles. CaFe2O4 is a metal oxide (MOx) with a bandgap around 1.9 eV making it a suitable candidate for visible light-activated gas sensors. Our gas sensors were tested under a reducing gas (i.e., ethanol) by illuminating them with different light-emitting diode (LED) wavelengths (i.e., 465-640 nm). Regardless of their inferior response compared to the thermally activated counterparts, the developed sensors have shown their ability to detect ethanol down to 100 ppm in a reversible way and solely with the energy provided by an LED. The highest response was reached using a blue LED (465 nm) activation. Despite some responses found even in dark conditions, it was demonstrated that upon illumination the recovery after the ethanol exposure was improved, showing that the energy provided by the LEDs is sufficient to activate the desorption process between the ethanol and the CaFe2O4 surface.
Dipòsit Digital de la UB
Publicación Artículo científico (JournalArticle)

Sensitivity-selectivity trade-offs in surface ionization gas detection

  • Müller, Gerhard
  • Prades García, Juan Daniel
  • Hackner, Angelika
  • Ponzoni, Andrea
  • Comini, Elisabetta
  • Sberveglieri, Giorgio
Surface ionization (SI) provides a simple, sensitive, and selective method for the detection of high-proton affinity substances, such as organic decay products, medical and illicit drugs as well as a range of other hazardous materials. Tests on different kinds of SI sensors showed that the sensitivity and selectivity of such devices is not only dependent on the stoichiometry and nanomorphology of the emitter materials, but also on the shape of the electrode configurations that are used to read out the SI signals. Whereas, in parallel-plate capacitor devices, different kinds of emitter materials exhibit a high level of amine-selectivity, MEMS (micro-electro-mechanical-systems) and NEMS (nanowire) versions of SI sensors employing the same kinds of emitter materials provide significantly higher sensitivity, however, at the expense of a reduced chemical selectivity. In this paper, it is argued that such sensitivity-selectivity trade-offs arise from unselective physical ionization phenomena that occur in the high-field regions immediately adjacent to the surfaces of sharply curved MEMS (NEMS) emitter and collector electrodes.
Dipòsit Digital de la UB
Publicación Artículo científico (JournalArticle)

Insights into the reproduction of some Antarctic dendroceratid, poecilosclerid, and haplosclerid demosponges

  • Koutsouveli, Vasiliki
  • Taboada Moreno, Sergi
  • Moles, Juan
  • Cristobo, Javier
  • Ríos, Pilar
  • Bertran, Andrea
  • Solà Peracaula, Joan
  • Ávila Escartín, Conxita
  • Riesgo Gil, Ana
Sponges are a dominant element of the Antarctic benthic communities, posing both high species richness and large population densities. Despite their importance in Antarctic ecosystems, very little is known about their reproductive patterns and strategies. In our study, we surveyed the tissue of six different species for reproductive elements, namely, Dendrilla antarctica Topsent, 1905 (order Dendroceratida), Phorbas areolatus (Thiele, 1905), Kirkpatrickia variolosa (Kirkpatrick, 1907), and Isodictya kerguelenensis (Ridley & Dendy, 1886) (order Poecilosclerida), and Hemigellius pilosus (Kirkpatrick, 1907) and Haliclona penicillata (Topsent, 1908) (Haplosclerida). Samples of these six species containing various reproductive elements were collected in Deception Island and were processed for both light and transmission electron microscopy (TEM). Even though we were not able to monitor the entire reproductive cycle, due to time and meteorological conditions, we report important aspects of the reproduction of these species. This includes oocyte and embryo morphology and cell ultrastructure, follicular structures and nurse cell activity, as well as vitellogenesis. All species were brooding their embryos within their mesohyl. Both oocytes and embryos were registered in the majority of the studied species, and a single sperm cell being carried to an egg for fertilization was observed in H. penicillata. While the reproductive periods of all species coincided temporally, some of them seemed to rely on a single spawning event, this being suggested by the synchronic oogenesis and embryogenesis occurrence of D. antarctica, P. areolatus and I. kerguelenensis. In contrast, K. variolosa had an asynchronous embryo development, which suggests several larval release events. Our results suggest that differences in the reproductive strategies and morphological traits might succeed in the coexistence of these species at the same habitat avoiding the direct competition between them.
Dipòsit Digital de la UB
Publicación Artículo científico (JournalArticle)

Enhancement of the sub-band-gap photoconductivity in ZnO nanowires through surface functionalization with carbon nanodots

  • Cammi, Davide
  • Zimmermann, Kseniia
  • Gorny, René
  • Vogt, Angelina
  • Dissinger, Frank
  • Gad, Alaaeldin
  • Markiewicz, Nicolai
  • Waag, Andreas
  • Prades García, Juan Daniel
  • Ronning, Carsten
  • Waldvogel, Siegfried R.
  • Voss, Tobias
We report on the surface functionalization of ZnO nanowire (NW) arrays by attachment of carbon nanodots (C-dots) stabilized by polyethylenimine. The photoconductive properties of the ZnO NWs/C-dots devices were investigated under photoexcitation with photon energies below and above the ZnO band gap. The results indicate an increased photoresponse of the functionalized devices in the visible spectral range, as well as enhanced UV photoconductivity. This is attributed to the fast injection of photoexcited electrons from the C-dots into the conduction band of the ZnO NWs, and the subsequent slower desorption of molecular species from the NW surface, which reduces the surface depletion region in the NWs. The surface functionalization of the ZnO NWs with carbon nanodots also impacts the dynamics of the photocurrent decay, inducing a slower relaxation of the photogenerated charge carriers.
Dipòsit Digital de la UB
Publicación Artículo científico (JournalArticle)

NH3 sensing with self-assembled ZnO-nanowire μHP sensors in isothermal and temperature-pulsed mode

  • Shao, Feng
  • Fan, Jiandong
  • Hernández Ramírez, Francisco
  • Fàbrega Gallego, Cristian
  • Andreu Arbella, Teresa
  • Cabot i Codina, Andreu
  • Prades García, Juan Daniel
  • López, Núria (López Alonso)
  • Udrea, Florian
  • De Luca, Andrea
  • Ali, Syed Zeeshan
  • Morante i Lleonart, Joan Ramon
Dielectrophoretic alignment is found to be a simple and efficient method to deposit the solution prepared ZnO nanowires onto micro hot plate substrates. Due to the strong surface effects, positive temperature coefficient for resistance was encountered with ZnO nanowires in the high temperature range (>250 degrees C). The response to ammonia (NH3) was evaluated in isothermal and temperature-pulsed operation mode; the relative higher response observed in the latter case demonstrates that the use of this methodology is a good strategy to improve the performance of metal oxide sensors based on nanomaterials. Here, we evaluate the response to NH3 and qualitatively describe the sensing mechanism in temperature-pulsed mode, highlighting the main differences compared to the standard isothermal methodology.
Dipòsit Digital de la UB
Publicación Artículo científico (JournalArticle)

DNA-origami-aided lithography for sub-10 nanometer pattern printing

  • Gállego, Isaac
  • Manning, Brendan
  • Prades García, Juan Daniel
  • Mir Llorente, Mònica
  • Samitier i Martí, Josep
  • Eritja i Casadellà, Ramon
We report the first DNA-based origami technique that can print addressable patterns on surfaces with sub-10 nm resolution. Specifically, we have used a two-dimensional DNA origami as a template (DNA origami stamp) to transfer DNA with pre-programmed patterns (DNA ink) on gold surfaces. The DNA ink is composed of thiol-modified staple strands incorporated at specific positions of the DNA origami stamp to create patterns upon thiol-gold bond formation on the surface (DNA ink). The DNA pattern formed is composed of unique oligonucleotide sequences, each of which is individually addressable. As a proof-of-concept, we created a linear pattern of oligonucleotide-modified gold nanoparticles complementary to the DNA ink pattern. We have developed an in silico model to identify key elements in the formation of our DNA origami-driven lithography and nanoparticle patterning as well as simulate more complex nanoparticle patterns on surfaces.
Dipòsit Digital de la UB
Publicación Artículo científico (JournalArticle)

Electron beam lithography for contacting single nanowires on non-flat suspended substrates

  • Samà Monsonís, Jordi
  • Domènech Gil, Guillem
  • Gracia, Isabel
  • Borrisé, Xavier
  • Cané i Ballart, Carles
  • Barth, Sven
  • Steib, Frederik
  • Waag, Andreas
  • Prades García, Juan Daniel
  • Romano Rodríguez, Albert
A methodology based on the use of Electron Beam Lithography for contacting individual nanowires on top of non-flat micromembranes and microhotplates has been implemented, and the practical details have been exhaustively described. The different fabrication steps have been adapted to the substrate's topology, requiring specific holders and conditions. The methodology is demonstrated on individual SnO2 nanowires, which, after fabrication, have been characterized as functional resistive gas nanosensors towards NH3 and benchmarked against similar devices fabricated using more conventional Dual Beam Focused Ion Beam techniques, demonstrating the superior properties of the here presented methodology, which can be further extended to other non-conventional suspended substrates and nanomaterials.
Dipòsit Digital de la UB
Publicación Contribución de congreso (ConferenceOutput)

Novel approaches towards highly selective self-powered gas sensors

  • Hoffmann, Martin W. G.
  • Casals Guillén, Olga
  • Mayrhofer, Leonhard
  • Fàbrega i Claveria, Ma. Carme
  • Caccamo, Lorenzo
  • Hernández Ramírez, Francisco
  • Lilienkamp, Gerhard
  • Daum, Winfried
  • Moseler, Michael
  • Shen, Hao
  • Waag, Andreas
  • Prades García, Juan Daniel
The prevailing design approaches of semiconductor gas sensors struggle to overcome most of their current limitations such as poor selectivity, and high power consumption. Herein, a new sensing concept based on devices that are capable of detecting gases without the need of any external power sources required to activate interaction of gases with sensor or to generate the sensor read out signal. Based on the integration of complementary functionalities (namely; powering and sensing) in a singular nanostructure, self-sustained gas sensors will be demonstrated. Moreover, a rational methodology to design organic surface functionalization that provide high selectivity towards single gas species will also be discussed. Specifically, theoretical results, confirmed experimentally, indicate that precisely tuning of the sterical and electronic structure of sensor material/organic interfaces can lead to unprecedented selectivity values, comparable to those typical of bioselective processes. Finally, an integrated gas sensor that combine both the self-powering and selective detection strategies in one single device will also be presented.
Dipòsit Digital de la UB
Publicación Artículo científico (JournalArticle)

Self-heating in pulsed mode for signal quality improvement: application to carbon nanostructures-based sensors

  • Monereo Cuscó, Oriol
  • Casals Guillén, Olga
  • Prades García, Juan Daniel
  • Cirera Hernández, Albert
Sensor signal instability and drift are still unresolved challenges in conductometric gas sensors. Here, the use of self-heating effect to operate a gas sensor in a pulsed temperature modulation mode (pulsed self-heating operation) is presented as an effective method to enhance signal stability and reduce consumption figures down to a few W. The sensor operation temperature was pulsed periodically between two levels, obtaining two different sensing states from one single device driven with self-heating, i.e. free of heater. The signal differences between both operating points correlated well with gas concentrations and displayed no drift. This methodology is exemplified with a thorough study of the response of carbon nanofibers to humidity. Specifically, after analyzing the influence of the pulse characteristics (i.e. temperature variation, pulse period and pulse duty cycle) on the sensor performance, thumb rules to select suitable pulsing conditions are provided. The methodology is successfully extended to other target gases, such as NO2 and NH3. Finally, its implementation in a real-time sensing system with low computational requirements is demonstrated and discussed in detail.
Dipòsit Digital de la UB
Publicación Artículo científico (JournalArticle)

The Power of Models: Modeling Power Consumption for IoT devices

  • Martínez, Borja
  • Montón, Màrius
  • Vilajosana Guillén, Ignasi
  • Prades García, Juan Daniel
Low-energy technologies in the Internet of Things (IoTs) era are still unable to provide the reliability needed by the industrial world, particularly in terms of the wireless operation that pervasive deployments demand. While the industrial wireless performance has achieved an acceptable degree in communications, it is no easy task to determine an efficient energy-dimensioning of the device in order to meet the application requirements. This is especially true in the face of the uncertainty inherent in energy harvesting. Thus, it is of utmost importance to model and dimension the energy consumption of the IoT applications at the pre-deployment or pre-production stages, especially when considering critical factors, such as reduced cost, life-time, and available energy. This paper presents a comprehensive model for the power consumption of wireless sensor nodes. The model takes a system-level perspective to account for all energy expenditures: communications, acquisition and processing. Furthermore, it is based only on parameters that can empirically be quantified once the platform (i.e., technology) and the application (i.e., operating conditions) are defined. This results in a new framework for studying and analyzing the energy life-cycles in applications, and it is suitable for determining in advance the specific weight of application parameters, as well as for understanding the tolerance margins and tradeoffs in the system.
Dipòsit Digital de la UB
Publicación Artículo científico (JournalArticle)

Localized self-heating in large arrays of 1D nanostructures

  • Monereo Cuscó, Oriol
  • Illera Robles, Sergio
  • Varea Espelt, Aïda
  • Schmidt, M.
  • Sauerwald, T.
  • Schütze, A.
  • Cirera Hernández, Albert
  • Prades García, Juan Daniel
One dimensional (1D) nanostructures offer a promising path towards highly efficient heating and temperature control in integrated microsystems. The so called self-heating effect can be used to modulate the response of solid state gas sensor devices. In this work, efficient self-heating was found to occur at random networks of nanostructured systems with similar power requirements to highly ordered systems (e.g. individual nanowires, where their thermal efficiency was attributed to the small dimensions of the objects). Infrared thermography and Raman spectroscopy were used to map the temperature profiles of films based on random arrangements of carbon nanofibers during self-heating. Both the techniques demonstrate consistently that heating concentrates in small regions, the here-called 'hot-spots'. On correlating dynamic temperature mapping with electrical measurements, we also observed that these minute hot-spots rule the resistance values observed macroscopically. A physical model of a random network of 1D resistors helped us to explain this observation. The model shows that, for a given random arrangement of 1D nanowires, current spreading through the network ends up defining a set of spots that dominate both the electrical resistance and power dissipation. Such highly localized heating explains the high power savings observed in larger nanostructured systems. This understanding opens a path to design highly efficient self-heating systems, based on random or pseudo-random distributions of 1D nanostructures.
Dipòsit Digital de la UB
Publicación Artículo científico (JournalArticle)

A highly selective and self-powered gas sensor via organic surface functionalization of p-Si/n-ZnO diodes

  • Hoffmann, Martin W. G.
  • Mayrhofer, Leonhard
  • Casals Guillén, Olga
  • Caccamo, Lorenzo
  • Hernández Ramírez, Francisco
  • Lilienkamp, Gerhard
  • Daum, Winfried
  • Moseler, Michael
  • Waag, Andreas
  • Shen, Hao
  • Prades García, Juan Daniel
Selectivity and low power consumption are major challenges in the development of sophisticated gas sensor devices. A sensor system is presented that unifies selective sensor-gas interactions and energy-harvesting properties, using defined organic-inorganic hybrid materials. Simulations of chemical-binding interactions and the consequent electronic surface modulation give more insight into the complex sensing mechanism of selective gas detection.
Dipòsit Digital de la UB
Publicación Contribución de congreso (ConferenceOutput)

Colorimetric sensor for bad odor detection using automated color correction

  • Schmitt, K.
  • Tarantik, K.
  • Pannek, C.
  • Benito Altamirano, Ismael
  • Casals Guillén, Olga
  • Romano Rodríguez, Albert
  • Wöllenstein, Jürgen
  • Prades García, Juan Daniel
Colorimetric sensors based on color-changing dyes offer a convenient approach for the quantitative measurement of gases. An integrated, mobile colorimetric sensor can be particularly helpful for occasional gas measurements, such as informal air quality checks for bad odors. In these situations, the main requirement is high availability, easy usage, and high specificity towards one single chemical compound, combined with cost-efficient production. In this contribution, we show how a well stablished colorimetric method can be adapted for easy operation and readout, making it suitable for the untrained end user. As an example, we present the use of pH indicators for the selective and reversible detection of NH3 in air (one relevant gas contributing to bad odors) using gas-sensitive layers dip coated on glass substrates. Our results show that the method can be adapted to detect NH3 concentrations lower than 1 ppm, with measure-to-result times in the range of a few minutes. We demonstrate that the color measurements can be carried out with the optical signals of RGB sensors, without losing quantitative performance.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

DNA-Origami-Driven Lithography for Patterning on Gold Surfaces with Sub-10 nm Resolution

  • Gállego, Isaac
  • Manning, Brendan
  • Prades, J. Daniel
  • Mir, Mònica
  • Samitier, Josep
  • Eritja Casadellà, Ramón
Sub-10 nm lithography of DNA patterns is achieved using the DNA-origami stamping method. This new strategy utilizes DNA origami to bind a preprogrammed DNA ink pattern composed of thiol-modified oligonucleotides on gold surfaces. Upon denaturation of the DNA origami, the DNA ink pattern is exposed. The pattern can then be developed by hybridization with complementary strands carrying gold nanoparticles., We thank L. A. Bottomley for discussion. The Nanotechnology Platform at the IBEC for SEM technical support. This study was supported by the European Communities (FUNMOL, FP7-NMP-213382-2), Spanish Ministry of Economy (CTQ2010-20541, CTQ2014-52588-R, CTQ2014-61758-EXP) (IG, BM and RE), the Generalitat de Catalunya (2009/SGR/208 and 2009/SGR/505) (IG, BM and RE) and (2014 SGR 1442) (JS, MM), the CIBER-BBN (VI National R&D&I Plan 2008-2011) (IG, BM, MM, JS and RE), Iniciativa Ingenio 2010, Consolider Program, CIBER Actions, Instituto de Salud Carlos III with assistance from the European Regional Development Fund (IG, BM, RE, JS, MM), and from the European Research Council (FP/2007-2013) / ERC Grant Agreement n. 336917 (JDP). JDP acknowledges the support from the Serra Húnter Program., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

DNA-Origami-Aided Lithography for Sub-10 Nanometer Pattern Printing

  • Gállego, Isaac
  • Manning, Brendan
  • Prades, Joan Daniel
  • Mir, Mònica
  • Samitier, Josep
  • Eritja Casadellà, Ramón
We report the first DNA-based origami technique that can print addressable patterns on surfaces with sub-10 nm resolution. Specifically, we have used a two-dimensional DNA origami as a template (DNA origami stamp) to transfer DNA with pre-programmed patterns (DNA ink) on gold surfaces. The DNA ink is composed of thiol-modified staple strands incorporated at specific positions of the DNA origami stamp to create patterns upon thiol-gold bond formation on the surface (DNA ink). The DNA pattern formed is composed of unique oligonucleotide sequences, each of which is individually addressable. As a proof-of-concept, we created a linear pattern of oligonucleotide-modified gold nanoparticles complementary to the DNA ink pattern. We have developed an in silico model to identify key elements in the formation of our DNA origami-driven lithography and nanoparticle patterning as well as simulate more complex nanoparticle patterns on surfaces., We thank L. A. Bottomley for discussion. The Nanotechnology Platform at the IBEC for SEM technical support. This study was supported by the European Communities (FUNMOL, FP7-NMP-213382- 2), Spanish Ministry of Education (CTQ2010-20541) (IG, BM and RE), the Generalitat de Catalunya (2009/SGR/208 and 2009/SGR/505) (IG, BM and RE) and (2014 SGR 1442) (JS, MM), the CIBER-BBN (VI National R&D&I Plan 2008–2011) (IG, BM, MM, JS and RE), Iniciativa Ingenio 2010, Consolider Program, CIBER Actions, Instituto de Salud Carlos III with assistance from the European Regional Development Fund (IG, BM, RE, JS, MM), and from the European Research Council (FP/2007–2013)/ERC Grant Agreement n. 336917 (JDP). JDP acknowledges the support from the Serra Húnter Program.
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Novel Approaches towards Highly Selective Self-Powered Gas Sensors

  • Hoffmann, M.W.G.
  • Casals, O.
  • Gad, A.E.
  • Mayrhofer, L.
  • Fàbrega, C.
  • Caccamo, L.
  • Hernandez-Ramirez, F.
  • Lilienkamp, G.
  • Daum, W.
  • Moseler, M.
  • Shen, H.
  • Waag, A.
  • Prades, J.D.
The prevailing design approaches of semiconductor gas sensors struggle to overcome most of their current limitations such as poor selectivity, and high power consumption. Herein, a new sensing concept based on devices that are capable of detecting gases without the need of any external power sources required to activate interaction of gases with sensor or to generate the sensor read out signal. Based on the integration of complementary functionalities (namely; powering and sensing) in a singular nanostructure, self-sustained gas sensors will be demonstrated. Moreover, a rational methodology to design organic surface functionalization that provide high selectivity towards single gas species will also be discussed. Specifically, theoretical results, confirmed experimentally, indicate that precisely tuning of the sterical and electronic structure of sensor material/organic interfaces can lead to unprecedented selectivity values, comparable to those typical of bioselective processes. Finally, an integrated gas sensor that combine both the self-powering and selective detection strategies in one single device will also be presented. © 2015 Published by Elsevier Ltd., Peer Reviewed
O2, repositorio institucional de la UOC
Publicación Artículo científico (JournalArticle)

How to implement a selective colorimetric gas sensor with off the shelf components?

  • Driau, Christian
  • Fàbrega, Cristian
  • Benito Altamirano, Ismael
  • Pfeiffer, Peter
  • Casals, Olga
  • Li, Hongqiang
  • Prades, J. Daniel
We report on how an inexpensive and very selective gas sensor can be implemented, simply combining colorimetric indicators casted on top of Scotch® tape, with a commercial microchip adapted here to measure optical reflectance. The system can be easily reproduced (leading to quantitatively consistent results), refreshed and reconfigured to sense different target gases, just replacing the colorimetric tape.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Highly Selective SAM-Nanowire Hybrid NO2 Sensor: Insight into Charge Transfer Dynamics and Alignment of Frontier Molecular Orbitals

  • Hoffmann, Martin W. G.
  • Prades García, Juan Daniel
  • Mayrhofer, Leonhard
  • Hernández Ramírez, Francisco
  • Järvi, T.T.
  • Moseler, Michael
  • Waag, Andreas
  • Shen, Hao
Selectivity and low power consumption are major challenges in the development of sophisticated gas sensor devices. A sensor system is presented that unifies selective sensor-gas interactions and energy-harvesting properties, using defined organic-inorganic hybrid materials. Simulations of chemical-binding interactions and the consequent electronic surface modulation give more insight into the complex sensing mechanism of selective gas detection.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

A low-cost approach to low-power gas sensors based on self-heating effects in large arrays of nanostructures

  • Monereo Cuscó, Oriol
  • Casals Guillén, Olga
  • Prades García, Juan Daniel
  • Cirera Hernández, Albert
The usual operation of a conductometric sensor device requires of an external energy source (i.e. an embedded heater). In the last years, the Joule effect in the sensing material, the so called self-heating effect, offered and alternative method to provide this energy: the probing current (or voltage) applied to measure the sensor signal also serves to heat up the sensor active film. Here, evidences of self-heating effects occurring on large arrays of nanostructures fabricated with low-cost methods are provided. The methodology is proven to be suitable to sense gases (humidity, NH3 and NO2) with low-powered heater-free devices.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Visible Light‐Driven p-Type Semiconductor Gas Sensors Based on CaFe2O4 Nanoparticles

  • Qomaruddin
  • Casals Guillén, Olga
  • Utka, Andris
  • Granz, Tony
  • Waag, Andreas
  • Wasisto, Hutomo Suryo
  • Prades García, Juan Daniel
  • Fàbrega Gallego, Cristian
In this work, we present conductometric gas sensors based on p-type calcium iron oxide (CaFe2O4) nanoparticles. CaFe2O4 is a metal oxide (MOx) with a bandgap around 1.9 eV making it a suitable candidate for visible light-activated gas sensors. Our gas sensors were tested under a reducing gas (i.e., ethanol) by illuminating them with different light-emitting diode (LED) wavelengths (i.e., 465-640 nm). Regardless of their inferior response compared to the thermally activated counterparts, the developed sensors have shown their ability to detect ethanol down to 100 ppm in a reversible way and solely with the energy provided by an LED. The highest response was reached using a blue LED (465 nm) activation. Despite some responses found even in dark conditions, it was demonstrated that upon illumination the recovery after the ethanol exposure was improved, showing that the energy provided by the LEDs is sufficient to activate the desorption process between the ethanol and the CaFe2O4 surface.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Insights into the reproduction of some Antarctic dendroceratid, poecilosclerid, and haplosclerid demosponges

  • Koutsouveli, Vasiliki
  • Taboada Moreno, Sergi
  • Moles, Juan
  • Cristobo, Javier
  • Ríos, Pilar
  • Bertran, Andrea
  • Solà Peracaula, Joan
  • Ávila Escartín, Conxita
  • Riesgo Gil, Ana
Sponges are a dominant element of the Antarctic benthic communities, posing both high species richness and large population densities. Despite their importance in Antarctic ecosystems, very little is known about their reproductive patterns and strategies. In our study, we surveyed the tissue of six different species for reproductive elements, namely, Dendrilla antarctica Topsent, 1905 (order Dendroceratida), Phorbas areolatus (Thiele, 1905), Kirkpatrickia variolosa (Kirkpatrick, 1907), and Isodictya kerguelenensis (Ridley & Dendy, 1886) (order Poecilosclerida), and Hemigellius pilosus (Kirkpatrick, 1907) and Haliclona penicillata (Topsent, 1908) (Haplosclerida). Samples of these six species containing various reproductive elements were collected in Deception Island and were processed for both light and transmission electron microscopy (TEM). Even though we were not able to monitor the entire reproductive cycle, due to time and meteorological conditions, we report important aspects of the reproduction of these species. This includes oocyte and embryo morphology and cell ultrastructure, follicular structures and nurse cell activity, as well as vitellogenesis. All species were brooding their embryos within their mesohyl. Both oocytes and embryos were registered in the majority of the studied species, and a single sperm cell being carried to an egg for fertilization was observed in H. penicillata. While the reproductive periods of all species coincided temporally, some of them seemed to rely on a single spawning event, this being suggested by the synchronic oogenesis and embryogenesis occurrence of D. antarctica, P. areolatus and I. kerguelenensis. In contrast, K. variolosa had an asynchronous embryo development, which suggests several larval release events. Our results suggest that differences in the reproductive strategies and morphological traits might succeed in the coexistence of these species at the same habitat avoiding the direct competition between them.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Locally grown SnO2 NWs as low power ammonia sensor

  • Samà Monsonís, Jordi
  • Barth, Sven
  • Jiménez Díaz, Román
  • Prades García, Juan Daniel
  • Casals Guillén, Olga
  • Gràcia Tortadés, Isabel
  • Cané i Ballart, Carles
  • Romano Rodríguez, Albert
Localized growth of SnO2 nanowires on top of CMOS compatible micromembranes that incorporate a buried heater and prepatterned interdigitated electrodes has been achieved that presents the advantage that it allows to easily and directly integrate the advantageous properties of quasi-one dimensional structures in an advanced electronic device by a Vapor Liquid Solid (VLS) mechanism. A NWs based sensor of this type is characterized as a low power gas sensor towards NH3 at different temperatures. Stable and reproducible response is obtained, that allows detecting concentrations below the time-weighted average exposure limit for 8 h.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Novel approaches towards highly selective self-powered gas sensors

  • Hoffmann, Martin W. G.
  • Casals Guillén, Olga
  • Mayrhofer, Leonhard
  • Fàbrega i Claveria, Ma. Carme
  • Caccamo, Lorenzo
  • Hernández Ramírez, Francisco
  • Lilienkamp, Gerhard
  • Daum, Winfried
  • Moseler, Michael
  • Shen, Hao
  • Waag, Andreas
  • Prades García, Juan Daniel
The prevailing design approaches of semiconductor gas sensors struggle to overcome most of their current limitations such as poor selectivity, and high power consumption. Herein, a new sensing concept based on devices that are capable of detecting gases without the need of any external power sources required to activate interaction of gases with sensor or to generate the sensor read out signal. Based on the integration of complementary functionalities (namely; powering and sensing) in a singular nanostructure, self-sustained gas sensors will be demonstrated. Moreover, a rational methodology to design organic surface functionalization that provide high selectivity towards single gas species will also be discussed. Specifically, theoretical results, confirmed experimentally, indicate that precisely tuning of the sterical and electronic structure of sensor material/organic interfaces can lead to unprecedented selectivity values, comparable to those typical of bioselective processes. Finally, an integrated gas sensor that combine both the self-powering and selective detection strategies in one single device will also be presented.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Low-cost fabrication of zero-power metal oxide nanowire gas sensors: trends and challenges

  • Samà Monsonís, Jordi
  • Prades García, Juan Daniel
  • Casals Guillén, Olga
  • Barth, Sven
  • Gràcia Tortadés, Isabel
  • Cané i Ballart, Carles
  • Domènech Gil, Guillem
  • Hernández Ramírez, Francisco
  • Romano Rodríguez, Albert
Self-heating of metal oxide nanowires when a measuring current flows through them allows simultaneously heating the metal oxide, which is required for correct gas sensing operation, and measuring the nanowire resistance change, which is achieved from the ratio between the voltage drop at its edges and the current injected by the source measurement unit. In this way a drastic reduction of the power consumption of the gas sensor down to some μW is obtained and, additionally, it simplifies the practical operation of the devices, but the required control electronics that assures the correct and stable current flow through the device becomes much more complex. In this work the degree of maturity of this almost zero-power consuming gas detection systems based on nanowires will be shown and some recent advances in the use of nanowires mats or carbon nanofibers will be presented.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Highly Specific and Wide Range NO2 sensor with color readout

  • Fàbrega Gallego, Cristian
  • Fernández Romero, Luis
  • Monereo Cuscó, Oriol
  • Pons Balagué, Alba
  • Xuriguera Martín, María Elena
  • Casals Guillén, Olga
  • Waag, Andreas
  • Prades García, Juan Daniel
We present a simple and inexpensive method to implement a Griess-Saltzman-type reaction that combines the advantages of the liquid phase method (high specificity and fast response time) with the benefits of a solid implementation (easy to handle). We demonstrate that the measurements can be carried out using conventional RGB sensors; circumventing all the limitations around the measurement of the samples with spectrometers. We also present a method to optimize the measurement protocol and target a specific range of NO2 concentrations. We demonstrate that it is possible to measure the concentration of NO2 from 50 ppb to 300 ppm with high specificity and without modifying the Griess-Saltzman reagent.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

NH3 sensing with self-assembled ZnO-nanowire μHP sensors in isothermal and temperature-pulsed mode

  • Shao, Feng
  • Fan, Jiandong
  • Hernández Ramírez, Francisco
  • Fàbrega Gallego, Cristian
  • Andreu Arbella, Teresa
  • Cabot i Codina, Andreu
  • Prades García, Juan Daniel
  • López, Núria (López Alonso)
  • Udrea, Florian
  • De Luca, Andrea
  • Ali, Syed Zeeshan
  • Morante i Lleonart, Joan Ramon
Dielectrophoretic alignment is found to be a simple and efficient method to deposit the solution prepared ZnO nanowires onto micro hot plate substrates. Due to the strong surface effects, positive temperature coefficient for resistance was encountered with ZnO nanowires in the high temperature range (>250 degrees C). The response to ammonia (NH3) was evaluated in isothermal and temperature-pulsed operation mode; the relative higher response observed in the latter case demonstrates that the use of this methodology is a good strategy to improve the performance of metal oxide sensors based on nanomaterials. Here, we evaluate the response to NH3 and qualitatively describe the sensing mechanism in temperature-pulsed mode, highlighting the main differences compared to the standard isothermal methodology.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Localized self-heating in large arrays of 1D nanostructures

  • Monereo Cuscó, Oriol
  • Illera Robles, Sergio
  • Varea Espelt, Aïda
  • Schmidt, M.
  • Sauerwald, T.
  • Schütze, A.
  • Cirera Hernández, Albert
  • Prades García, Juan Daniel
One dimensional (1D) nanostructures offer a promising path towards highly efficient heating and temperature control in integrated microsystems. The so called self-heating effect can be used to modulate the response of solid state gas sensor devices. In this work, efficient self-heating was found to occur at random networks of nanostructured systems with similar power requirements to highly ordered systems (e.g. individual nanowires, where their thermal efficiency was attributed to the small dimensions of the objects). Infrared thermography and Raman spectroscopy were used to map the temperature profiles of films based on random arrangements of carbon nanofibers during self-heating. Both the techniques demonstrate consistently that heating concentrates in small regions, the here-called 'hot-spots'. On correlating dynamic temperature mapping with electrical measurements, we also observed that these minute hot-spots rule the resistance values observed macroscopically. A physical model of a random network of 1D resistors helped us to explain this observation. The model shows that, for a given random arrangement of 1D nanowires, current spreading through the network ends up defining a set of spots that dominate both the electrical resistance and power dissipation. Such highly localized heating explains the high power savings observed in larger nanostructured systems. This understanding opens a path to design highly efficient self-heating systems, based on random or pseudo-random distributions of 1D nanostructures.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

A parts per billion (ppb) sensor for NO2 with microwatt (μW) power requirements based on micro light plates

  • Casals Guillén, Olga
  • Markiewicz, Nicolai
  • Fàbrega Gallego, Cristian
  • Gràcia Tortadés, Isabel
  • Cané i Ballart, Carles
  • Wasisto, Hutomo Suryo
  • Waag, Andreas
  • Prades García, Juan Daniel
A film of gas sensitive ZnO nanoparticles has been coupled with a low-power micro light plate (μLP) to achieve a NO2-parts-per-billion conductometric gas sensor operating at room temperature. In this μLP configuration, an InGaN-based LED (emitting at 455 nm) is integrated at a few hundred nanometers distance from the sensor material, leading to sensor photoactivation with well controlled, uniform, and high irradiance conditions, and very low electrical power needs. The response curves to different NO2 concentrations as a function of the irradiance displayed a bell-like shape. Responses of 20% to 25 ppb of NO2 were already observed at irradiances of 5 mWatts·cm-2 (applying an electrical power as low as 30 μW). In the optimum illumination conditions (around 60 mWatts·cm-2, or 200 μW of electric power), responses of 94% to 25 ppb were achieved, corresponding to a lower detection limit of 1 ppb of NO2. Higher irradiance values worsened the sensor response in the parts-per-billion range of NO2 concentrations. The responses to other gases such as NH3, CO, and CH4 were much smaller, showing a certain selectivity toward NO2. The effects of humidity on the sensor response are also discussed.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Novel Approaches towards Highly Selective Self-Powered Gas Sensors

  • Hoffmann, M.W.G.
  • Casals, O.
  • Gad, A.E.
  • Mayrhofer, L.
  • Fàbrega, C.
  • Caccamo, L.
  • Hernandez-Ramirez, F.
  • Lilienkamp, G.
  • Daum, W.
  • Moseler, M.
  • Shen, H.
  • Waag, A.
  • Prades, J.D.
The prevailing design approaches of semiconductor gas sensors struggle to overcome most of their current limitations such as poor selectivity, and high power consumption. Herein, a new sensing concept based on devices that are capable of detecting gases without the need of any external power sources required to activate interaction of gases with sensor or to generate the sensor read out signal. Based on the integration of complementary functionalities (namely; powering and sensing) in a singular nanostructure, self-sustained gas sensors will be demonstrated. Moreover, a rational methodology to design organic surface functionalization that provide high selectivity towards single gas species will also be discussed. Specifically, theoretical results, confirmed experimentally, indicate that precisely tuning of the sterical and electronic structure of sensor material/organic interfaces can lead to unprecedented selectivity values, comparable to those typical of bioselective processes. Finally, an integrated gas sensor that combine both the self-powering and selective detection strategies in one single device will also be presented. © 2015 Published by Elsevier Ltd., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Sensitivity-selectivity trade-offs in surface ionization gas detection

  • Müller, Gerhard
  • Prades García, Juan Daniel
  • Hackner, Angelika
  • Ponzoni, Andrea
  • Comini, Elisabetta
  • Sberveglieri, Giorgio
Surface ionization (SI) provides a simple, sensitive, and selective method for the detection of high-proton affinity substances, such as organic decay products, medical and illicit drugs as well as a range of other hazardous materials. Tests on different kinds of SI sensors showed that the sensitivity and selectivity of such devices is not only dependent on the stoichiometry and nanomorphology of the emitter materials, but also on the shape of the electrode configurations that are used to read out the SI signals. Whereas, in parallel-plate capacitor devices, different kinds of emitter materials exhibit a high level of amine-selectivity, MEMS (micro-electro-mechanical-systems) and NEMS (nanowire) versions of SI sensors employing the same kinds of emitter materials provide significantly higher sensitivity, however, at the expense of a reduced chemical selectivity. In this paper, it is argued that such sensitivity-selectivity trade-offs arise from unselective physical ionization phenomena that occur in the high-field regions immediately adjacent to the surfaces of sharply curved MEMS (NEMS) emitter and collector electrodes.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Electron beam lithography for contacting single nanowires on non-flat suspended substrates

  • Samà Monsonís, Jordi
  • Domènech Gil, Guillem
  • Gracia, Isabel
  • Borrisé, Xavier
  • Cané i Ballart, Carles
  • Barth, Sven
  • Steib, Frederik
  • Waag, Andreas
  • Prades García, Juan Daniel
  • Romano Rodríguez, Albert
A methodology based on the use of Electron Beam Lithography for contacting individual nanowires on top of non-flat micromembranes and microhotplates has been implemented, and the practical details have been exhaustively described. The different fabrication steps have been adapted to the substrate's topology, requiring specific holders and conditions. The methodology is demonstrated on individual SnO2 nanowires, which, after fabrication, have been characterized as functional resistive gas nanosensors towards NH3 and benchmarked against similar devices fabricated using more conventional Dual Beam Focused Ion Beam techniques, demonstrating the superior properties of the here presented methodology, which can be further extended to other non-conventional suspended substrates and nanomaterials.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

DNA-origami-aided lithography for sub-10 nanometer pattern printing

  • Gállego, Isaac
  • Manning, Brendan
  • Prades García, Juan Daniel
  • Mir Llorente, Mònica
  • Samitier i Martí, Josep
  • Eritja i Casadellà, Ramon
We report the first DNA-based origami technique that can print addressable patterns on surfaces with sub-10 nm resolution. Specifically, we have used a two-dimensional DNA origami as a template (DNA origami stamp) to transfer DNA with pre-programmed patterns (DNA ink) on gold surfaces. The DNA ink is composed of thiol-modified staple strands incorporated at specific positions of the DNA origami stamp to create patterns upon thiol-gold bond formation on the surface (DNA ink). The DNA pattern formed is composed of unique oligonucleotide sequences, each of which is individually addressable. As a proof-of-concept, we created a linear pattern of oligonucleotide-modified gold nanoparticles complementary to the DNA ink pattern. We have developed an in silico model to identify key elements in the formation of our DNA origami-driven lithography and nanoparticle patterning as well as simulate more complex nanoparticle patterns on surfaces.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Facile integration of ordered nanowires in functional devices

  • Guilera Sala, Jordi
  • Fàbrega Gallego, Cristian
  • Casals Guillén, Olga
  • Hernández Ramírez, Francisco
  • Wang, Shuangzhou
  • Mathur, Sanjay
  • Udrea, Florian
  • De Luca, Andrea
  • Ali, Syed Zeeshan
  • Romano Rodríguez, Albert
  • Prades García, Juan Daniel
  • Morante i Lleonart, Joan Ramon
The integration of one-dimensional (1D) nanostructures of non-industry-standard semiconductors infunctional devices following bottom-up approaches is still an open challenge that hampers the exploita-tion of all their potential. Here, we present a simple approach to integrate metal oxide nanowires inelectronic devices based on controlled dielectrophoretic positioning together with proof of conceptdevices that corroborate their functionality. The method is flexible enough to manipulate nanowiresof different sizes and compositions exclusively using macroscopic solution-based techniques in conven-tional electrode designs. Our results show that fully functional devices, which display all the advantagesof single-nanowire gas sensors, photodetectors, and even field-effect transistors, are thus obtained rightafter a direct assembly step without subsequent metallization processing. This paves the way to lowcost, high throughput manufacturing of general-purpose electronic devices based on non-conventionaland high quality 1D nanostructures driving up many options for high performance and new low energyconsumption devices.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Continuous Live-Cell Culture Imaging and Single-Cell Tracking by Computational Lensfree LED Microscopy

  • Scholz, Gregor
  • Mariana, Shinta
  • Dharmawan, Agus Budi
  • Syamsu, Iqbal
  • Hörmann, Philipp
  • Reuse, Carsten
  • Hartmann, Jana
  • Hiller, Karsten
  • Prades García, Juan Daniel
  • Wasisto, Hutomo Suryo
  • Waag, Andreas
Continuous cell culture monitoring as a way of investigating growth, proliferation, and kinetics of biological experiments is in high demand. However, commercially available solutions are typically expensive and large in size. Digital inline-holographic microscopes (DIHM) can provide a cost-effective alternative to conventional microscopes, bridging the gap towards live-cell culture imaging. In this work, a DIHM is built from inexpensive components and applied to different cell cultures. The images are reconstructed by computational methods and the data are analyzed with particle detection and tracking methods. Counting of cells as well as movement tracking of living cells is demonstrated, showing the feasibility of using a field-portable DIHM for basic cell culture investigation and bringing about the potential to deeply understand cell motility.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Enhancement of the sub-band-gap photoconductivity in ZnO nanowires through surface functionalization with carbon nanodots

  • Cammi, Davide
  • Zimmermann, Kseniia
  • Gorny, René
  • Vogt, Angelina
  • Dissinger, Frank
  • Gad, Alaaeldin
  • Markiewicz, Nicolai
  • Waag, Andreas
  • Prades García, Juan Daniel
  • Ronning, Carsten
  • Waldvogel, Siegfried R.
  • Voss, Tobias
We report on the surface functionalization of ZnO nanowire (NW) arrays by attachment of carbon nanodots (C-dots) stabilized by polyethylenimine. The photoconductive properties of the ZnO NWs/C-dots devices were investigated under photoexcitation with photon energies below and above the ZnO band gap. The results indicate an increased photoresponse of the functionalized devices in the visible spectral range, as well as enhanced UV photoconductivity. This is attributed to the fast injection of photoexcited electrons from the C-dots into the conduction band of the ZnO NWs, and the subsequent slower desorption of molecular species from the NW surface, which reduces the surface depletion region in the NWs. The surface functionalization of the ZnO NWs with carbon nanodots also impacts the dynamics of the photocurrent decay, inducing a slower relaxation of the photogenerated charge carriers.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Self-heating in pulsed mode for signal quality improvement: application to carbon nanostructures-based sensors

  • Monereo Cuscó, Oriol
  • Casals Guillén, Olga
  • Prades García, Juan Daniel
  • Cirera Hernández, Albert
Sensor signal instability and drift are still unresolved challenges in conductometric gas sensors. Here, the use of self-heating effect to operate a gas sensor in a pulsed temperature modulation mode (pulsed self-heating operation) is presented as an effective method to enhance signal stability and reduce consumption figures down to a few W. The sensor operation temperature was pulsed periodically between two levels, obtaining two different sensing states from one single device driven with self-heating, i.e. free of heater. The signal differences between both operating points correlated well with gas concentrations and displayed no drift. This methodology is exemplified with a thorough study of the response of carbon nanofibers to humidity. Specifically, after analyzing the influence of the pulse characteristics (i.e. temperature variation, pulse period and pulse duty cycle) on the sensor performance, thumb rules to select suitable pulsing conditions are provided. The methodology is successfully extended to other target gases, such as NO2 and NH3. Finally, its implementation in a real-time sensing system with low computational requirements is demonstrated and discussed in detail.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

DNA-origami-driven lithography for patterning on gold surfaces with sub-10 nm resolution

  • Gállego, Isaac
  • Manning, Brendan
  • Prades García, Juan Daniel
  • Mir Llorente, Mònica
  • Samitier i Martí, Josep
  • Eritja i Casadellà, Ramon
Sub-10 nm lithography of DNA patterns is achieved using the DNA-origami stamping method. This new strategy utilizes DNA origami to bind a preprogrammed DNA ink pattern composed of thiol-modified oligonucleotides on gold surfaces. Upon denaturation of the DNA origami, the DNA ink pattern is exposed. The pattern can then be developed by hybridization with complementary strands carrying gold nanoparticles.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Colorimetric sensor for bad odor detection using automated color correction

  • Schmitt, K.
  • Tarantik, K.
  • Pannek, C.
  • Benito Altamirano, Ismael
  • Casals Guillén, Olga
  • Romano Rodríguez, Albert
  • Wöllenstein, Jürgen
  • Prades García, Juan Daniel
Colorimetric sensors based on color-changing dyes offer a convenient approach for the quantitative measurement of gases. An integrated, mobile colorimetric sensor can be particularly helpful for occasional gas measurements, such as informal air quality checks for bad odors. In these situations, the main requirement is high availability, easy usage, and high specificity towards one single chemical compound, combined with cost-efficient production. In this contribution, we show how a well stablished colorimetric method can be adapted for easy operation and readout, making it suitable for the untrained end user. As an example, we present the use of pH indicators for the selective and reversible detection of NH3 in air (one relevant gas contributing to bad odors) using gas-sensitive layers dip coated on glass substrates. Our results show that the method can be adapted to detect NH3 concentrations lower than 1 ppm, with measure-to-result times in the range of a few minutes. We demonstrate that the color measurements can be carried out with the optical signals of RGB sensors, without losing quantitative performance.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Integrated Strategy toward Self-Powering and Selectivity Tuning of Semiconductor Gas Sensors

  • Gad, Alaaeldin
  • Hoffmann, Martin W. G.
  • Casals Guillén, Olga
  • Mayrhofer, Leonhard
  • Fàbrega Gallego, Cristian
  • Caccamo, Lorenzo
  • Hernández Ramírez, Francisco
  • Mohajerani, Matin S.
  • Moseler, Michael
  • Shen, Hao
  • Waag, Andreas
  • Prades García, Juan Daniel
Inorganic conductometric gas sensors struggle to overcome limitations in high power consumption and poor selectivi-ty. Herein, recent advances in developing self-powered gas sensors with tunable selectivity are introduced. Alternative general approaches for powering gas sensors were realized via proper integration of complementary functionalities (namely; powering and sensing) in a singular heterostructure. These solar light driven gas sensors operating at room temperature without applying any additional external powering sources are comparatively discussed. The TYPE-1 gas sensor based on integration of pure inorganic interfaces (e.g. CdS/n-ZnO/p-Si) is capable of delivering a self-sustained sensing response, while it shows a non-selective interaction towards oxidizing and reducing gases. The structural and the optical merits of TYPE-1 sensor are investigated giving more insights into the role of light activation on the modu-lation of the self-powered sensing response. In the TYPE-2 sensor, the selectivity of inorganic materials is tailored through surface functionalization with self-assembled organic monolayers (SAMs). Such hybrid interfaces (e.g. SAMs/ZnO/p-Si) have specific surface interactions with target gases compared to the non-specific oxidation-reduction interactions governing the sensing mechanism of simple inorganic sensors. The theoretical modeling using density functional theory (DFT) has been used to simulate the sensing behavior of inorganic/organic/gas interfaces, revealing that the alignment of organic/gas frontier molecular orbitals with respect to the inorganic Fermi level is the key factor for tuning selectivity. These platforms open new avenues for developing advanced energy-neutral gas sensing devices and concepts.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Site-selectively grown SnO2 NWs networks on micromembranes for efficient ammonia sensing in humid conditions

  • Samà Monsonís, Jordi
  • Barth, Sven
  • Domènech Gil, Guillem
  • Prades García, Juan Daniel
  • López, Núria (López Alonso)
  • Casals Guillén, Olga
  • Gràcia Tortadés, Isabel
  • Cané i Ballart, Carles
  • Romano Rodríguez, Albert
SnO2 NWs networks on heated micromembranes have been characterized as ammonia sensors. The approach allows achieving reproducible growth and stable and long-lasting ammonia sensors with site-specific grown SnO2 NWs. The devices have been tested both in dry and humid conditions showing response time down to two minutes. Sensors have been tested up to 1 month, only presenting variation of the base resistance with full retention of the response towards the gaseous analytes. Different concurrent sensing mechanisms have been identified relating the determined sensing kinetics with previous theoretical calculations. Specifically, oxygen dissociation seems to play a key role in the overall ammonia sensing sequence. In humid conditions, moisture reduces the response to ammonia but also lowers the activation energy of the reaction process.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

The Power of Models: Modeling Power Consumption for IoT devices

  • Martínez, Borja
  • Montón, Màrius
  • Vilajosana Guillén, Ignasi
  • Prades García, Juan Daniel
Low-energy technologies in the Internet of Things (IoTs) era are still unable to provide the reliability needed by the industrial world, particularly in terms of the wireless operation that pervasive deployments demand. While the industrial wireless performance has achieved an acceptable degree in communications, it is no easy task to determine an efficient energy-dimensioning of the device in order to meet the application requirements. This is especially true in the face of the uncertainty inherent in energy harvesting. Thus, it is of utmost importance to model and dimension the energy consumption of the IoT applications at the pre-deployment or pre-production stages, especially when considering critical factors, such as reduced cost, life-time, and available energy. This paper presents a comprehensive model for the power consumption of wireless sensor nodes. The model takes a system-level perspective to account for all energy expenditures: communications, acquisition and processing. Furthermore, it is based only on parameters that can empirically be quantified once the platform (i.e., technology) and the application (i.e., operating conditions) are defined. This results in a new framework for studying and analyzing the energy life-cycles in applications, and it is suitable for determining in advance the specific weight of application parameters, as well as for understanding the tolerance margins and tradeoffs in the system.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Micro light plates for low-power photoactivated (gas) sensors

  • Markiewicz, Nicolai
  • Casals Guillén, Olga
  • Fàbrega Gallego, Cristian
  • Gracia, Isabel
  • Cané i Ballart, Carles
  • Wasisto, Hutomo Suryo
  • Waag, Andreas
  • Prades García, Juan Daniel
We report a miniaturized device integrating a photoactive material with a highly efficient Light Emitting Diode light source. This so-called micro light plate configuration allows for maximizing the irradiance impinging on the photoactive material, with a minimum power consumption, excellent uniformity, and accurate control of the illumination. We demonstrate these advantages with an example application: photoactivated gas sensors with a power consumption as low as 30 μW (this is 1000 times lower than the best figures reported to date). The letter also presents a quantitative model and a set of design rules to implement it in further integrated applications.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

A highly selective and self-powered gas sensor via organic surface functionalization of p-Si/n-ZnO diodes

  • Hoffmann, Martin W. G.
  • Mayrhofer, Leonhard
  • Casals Guillén, Olga
  • Caccamo, Lorenzo
  • Hernández Ramírez, Francisco
  • Lilienkamp, Gerhard
  • Daum, Winfried
  • Moseler, Michael
  • Waag, Andreas
  • Shen, Hao
  • Prades García, Juan Daniel
Selectivity and low power consumption are major challenges in the development of sophisticated gas sensor devices. A sensor system is presented that unifies selective sensor-gas interactions and energy-harvesting properties, using defined organic-inorganic hybrid materials. Simulations of chemical-binding interactions and the consequent electronic surface modulation give more insight into the complex sensing mechanism of selective gas detection.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Self-heating effects in large arrangements of randomly oriented carbon nanofibers: Application to gas sensors

  • Monereo Cuscó, Oriol
  • Prades García, Juan Daniel
  • Cirera Hernández, Albert
Herein, we prove that self-heating effects occur in sensor films made of randomly oriented nanoparticles (electro-sprayed, drop-casted and paint-brushed films of carbon nanofibers). A 2-point calibration method, reliable enough to overcome the lack of reproducibility of low cost fabrication methods, is also proposed. Self-heating operation makes possible reaching temperatures up to 250 °C with power consumptions in the range of tens of mW. For certain low-temperature applications (<100 °C) typical power consumptions are as low as tens of μW. The method is suitable to modulate the response towards gases, such as humidity, NH3 or NO2. This approach overcomes the complex fabrication requirements of previous self-heating investigations and opens the door to use this effect in cost-effective devices.