Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 7
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

On the Geometry of the Hamilton–Jacobi Equation and Generating Functions

  • Ferraro, Sebastián
  • León, Manuel de
  • Marrero, Juan Carlos
  • Martin de Diego, David
  • Vaquero, Miguel
60 pags., In this paper we develop a geometric version of the Hamilton–Jacobi equation in the Poisson setting. Specifically, we “geometrize” what is usually called a complete solution of the Hamilton–Jacobi equation. We use some well-known results about symplectic groupoids, in particular cotangent groupoids, as a keystone for the construction of our framework. Our methodology follows the ambitious program proposed by Weinstein (In Mechanics day (Waterloo, ON, 1992), volume 7 of fields institute communications, American Mathematical Society, Providence, 1996) in order to develop geometric formulations of the dynamical behavior of Lagrangian and Hamiltonian systems on Lie algebroids and Lie groupoids. This procedure allows us to take symmetries into account, and, as a by-product, we recover results from Channell and Scovel (Phys D 50(1):80–88, 1991), Ge (Indiana Univ. Math. J. 39(3):859–876, 1990), Ge and Marsden (Phys Lett A 133(3):134–139, 1988), but even in these situations our approach is new. A theory of generating functions for the Poisson structures considered here is also developed following the same pattern, solving a longstanding problem of the area: how to obtain a generating function for the identity transformation and the nearby Poisson automorphisms of Poisson manifolds. A direct application of our results gives the construction of a family of Poisson integrators, that is, integrators that conserve the underlying Poisson geometry. These integrators are implemented in the paper in benchmark problems. Some conclusions, current and future directions of research are shown at the end of the paper., This work has been partially supported by MINEICO, MTM 2013-42 870-P, MTM2015-64166-C2-2-P, MTM2016-76702-P, the European project IRSES-project “Geomech-246981” and the ICMAT Severo Ochoa project SEV-2011-0087 and SEV-2015- 0554. M. Vaquero wishes to thank MINEICO for a FPI-Ph.D. Position, BES-2011-045780, and David Iglesias-Ponte and Luis García-Naranjo for useful discussions. The research of S. Ferraro has been supported by CONICET (PIP 2013–2015 GI 11220120100532CO), ANPCyT (PICT 2013-1302) and SGCyT UNS., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Variational order for forced Lagrangian systems II. Euler-Poincaré equations with forcing

  • Martin de Diego, David
  • Martín De Almagro, R.T.S.
In this paper we provide a variational derivation of the Euler-Poincaré equations for systems subjected to external forces using an adaptation of the techniques introduced by Galley and others Martín de Diego and Martín de Almagro (2018 Nonlinearity 31 3814-3846), Galley (2013 Phys. Rev. Lett. 110 174301), Galley et al (2014 (arXiv:[math-Ph] 1412.3082)). Moreover, we study in detail the underlying geometry which is related to the notion of Poisson groupoid. Finally, we apply the previous construction to the formal derivation of the variational error for numerical integrators of forced Euler-Poincaré equations and the application of this theory to the derivation of geometric integrators for forced systems., The authors have been partially supported by Ministerio de Econom ́ıa, Industria yCompetitividad (MINEICO, Spain) under grants MTM 2013-42870-P, MTM 2015-64166-C2-2P, MTM2016-76702-P and “Severo Ochoa Programme for Centres of Ex-cellence” in R&D (SEV-2015-0554). With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000904-S)
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Material distributions

  • León, Manuel de
  • Jiménez, Víctor Manuel
The concept of material distribution is introduced as describing the geometric material structure of a general non-uniform body. Any smooth constitutive law is shown to give rise to a unique smooth integrable singular distribution. Ultimately, the material distribution and its associated singular foliation result in a rigorous and unique subdivision of the material body into strictly smoothly uniform components. Thus, the constitutive law induces a unique partition of the body into smoothly uniform sub-bodies, laminates, filaments and isolated points., This work was supported by MINECO Grants MTM2013-42-870-P and the ICMAT Severo Ochoa projects SEV-2011-0087 and SEV2015-0554. V.M.J. wishes to thank MINECO for a FPI-PhD Position
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Generalized variational calculus for continuous and discrete mechanical systems

  • Díaz, V. A.
  • Martin de Diego, David
In this paper, we consider a generalization of variational calculus which allows us to consider in the same framework different cases of mechanical systems, for instance, Lagrangian mechanics, Hamiltonian mechanics, systems subjected to constraints, optimal control theory... This generalized variational calculus is based on two main notions: the tangent lift of curves and the notion of complete lift of a vector field. Both concepts are also adapted for the case of skew-symmetric algebroids, therefore, our formalism easily extends to the case of Lie algebroids and nonholonomic systems (see also [20]). Hence, this framework automatically includes reduced mechanical systems subjected or not to constraints. Finally, we show that our formalism can be used to tackle the case of discrete mechanics, including reduced systems, systems subjected to constraints and discrete optimal control theory., This work has been partially supported by UNS, Argentina (project PGI 24/ZL06); FONCYT, Argentina (project PICT 2010-2746); CONICET, Argentina (project PIP 2010–2012 11220090101018); MEC (Spain) Grants MTM2013-42870-P, MTM2009-08166-E, and IRSESproject “Geomech-246981”.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

A Geometric Approach to the Optimal Control of Nonholonomic Mechanical Systems

  • Bloch, Anthony
  • Colombo, Leonardo
  • Gupta, Rohit
  • De Diego, David Martín
In this paper, we describe a constrained Lagrangian and Hamiltonian formalism for the optimal control of nonholonomic mechanical systems. In particular, we aim to minimize a cost functional, given initial and final conditions where the controlled dynamics are given by a nonholonomic mechanical system. In our paper, the controlled equations are derived using a basis of vector fields adapted to the nonholonomic distribution and the Riemannian metric determined by the kinetic energy. Given a cost function, the optimal control problem is understood as a constrained problem or equivalently, under some mild regularity conditions, as a Hamiltonian problem on the cotangent bundle of the nonholonomic distribution. A suitable Lagrangian submanifold is also shown to lead to the correct dynamics. Application of the theory is demonstrated through several examples including optimal control of the Chaplygin sleigh, a continuously variable transmission, and a problem of motion planning for obstacle avoidance, This work has been partially supported by grants MTM 2013-42870-P, MTM 2009-08166-E, IRSES-project “Geomech-246981” and NSF grants INSPIRE-1363720 and DMS-1207693, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Geometric Integrators for Higher-Order Variational Systems and Their Application to Optimal Control

  • Colombo, Leonardo
  • Ferraro, Sebastián
  • Martín de Diego, David
Numerical methods that preserve geometric invariants of the system, such as energy, momentum or the symplectic form, are called geometric integrators. In this paper we present a method to construct symplectic-momentum integrators for higher-order Lagrangian systems. Given a regular higher-order Lagrangian L: T( k )Q→ R with k≥ 1 , the resulting discrete equations define a generally implicit numerical integrator algorithm on T( k - 1 )Q× T( k - 1 )Q that approximates the flow of the higher-order Euler–Lagrange equations for L. The algorithm equations are called higher-order discrete Euler–Lagrange equations and constitute a variational integrator for higher-order mechanical systems. The general idea for those variational integrators is to directly discretize Hamilton’s principle rather than the equations of motion in a way that preserves the invariants of the original system, notably the symplectic form and, via a discrete version of Noether’s theorem, the momentum map. We construct an exact discrete Lagrangian Lde using the locally unique solution of the higher-order Euler–Lagrange equations for L with boundary conditions. By taking the discrete Lagrangian as an approximation of Lde, we obtain variational integrators for higher-order mechanical systems. We apply our techniques to optimal control problems since, given a cost function, the optimal control problem is understood as a second-order variational problem., This work has been supported by MICINN(Spain) GrantMTM2013-42870-P, ICMAT Severo Ochoa Project SEV-2011-0087 and IRSES-project “Geomech-246981.” The research of S. Ferraro has been supported by CONICETArgentina (PIP 2013-2015 GI 11220120100532CO), ANPCyT Argentina (PICT 2013-1302) and SGCyT UNS., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Hamilton-jacobi theory in multisymplectic classical field theories

  • Léon, M. de
  • Prieto-Martinez, P. D.
  • Roman-Roy, N.
  • Vilariño, S.
The geometric framework for the Hamilton-Jacobi theory developed in the studies of Carinena et al. [Int. J. Geom. Methods Mod. Phys. 3(7), 1417-1458 (2006)], Carinena et al. [Int. J. Geom. Methods Mod. Phys. 13(2), 1650017 (2015)], and de Léon et al. [Variations, Geometry and Physics (Nova Science Publishers, New York, 2009)] is extended for multisymplectic first-order classical field theories. The Hamilton-Jacobi problem is stated for the Lagrangian and the Hamiltonian formalisms of these theories as a particular case of a more general problem, and the classical Hamilton-Jacobi equation for field theories is recovered from this geometrical setting. Particular and complete solutions to these problems are defined and characterized in several equivalent ways in both formalisms, and the equivalence between them is proved. The use of distributions in jet bundles that represent the solutions to the field equations is the fundamental tool in this formulation. Some examples are analyzed and, in particular, the Hamilton-Jacobi equation for non-autonomous mechanical systems is obtained as a special case of our results.