Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 51
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Fano resonances and electromagnetically induced transparency in silicon waveguides loaded with plasmonic nanoresonators

  • Ortuño Molinero, Rubén
  • Cortijo-Munuera, Mario
  • Martínez, Alejandro|||0000-0001-5448-0140
The fundamental electric dipolar resonance of metallic nanostrips placed on top of a dielectric waveguide can be excited via evanescent wave coupling, thus giving rise to broad dips in the transmission spectrum of the waveguide. Here we show via numerical simulations that narrower and steeper Fano-like resonances can be obtained by asymmetrically coupling in the near field a larger nanostrip supporting an electric quadrupole in the frequency regime of interest to the original, shorter nanostrip. Under certain conditions, the spectral response corresponding to the electromagnetically induced transparency phenomenon is observed. We suggest that this hybrid plasmonic photonic approach could be especially relevant for sensing or all-optical switching applications in a photonic integrated platform such as silicon photonics., RO acknowledges support from Generalitat Valenciana through the VALi+d postdoctoral program (exp APOSTD/2014/004). AM acknowledges funding from contracts TEC2014-51902-C2-1-R and TEC2014-61906-EXP (MINECO/FEDER, UE) and NANOMET PLUS-PROMETEOII/2014/034 (Conselleria d'Educacio, Cultura i Esport).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Experimental measurement of plasmonic nanostructures embedded in silicon waveguide gaps

  • Espinosa-Soria, Alba
  • Griol Barres, Amadeu
  • Martínez, Alejandro|||0000-0001-5448-0140
In this work, we report numerical simulations and experiments of the optical response of a gold nanostrip embedded in a silicon strip waveguide gap at telecom wavelengths. We show that the spectral features observed in transmission and reflection when the metallic nanostructure is inserted in the gap are extremely different than those observed in free-space excitation. First, we find that interference between the guided field and the electric dipolar resonance of the metallic nanostructure results in highcontrast (> 10) spectral features showing an asymmetric Fano spectral profile. Secondly, we reveal a crossing in the transmission and reflection responses close to the nanostructure resonance wavelength as a key feature of our system. This approach, which can be realized using standard semiconductor nanofabrication tools, could lead to a full exploitation of the extreme properties of subwavelength metallic nanostructures in an on-chip configuration, with special relevance in fields such as biosensing or optical switching., We acknowledge support from the Spanish Ministry of Economy and Competiveness (MINECO) under grants TEC2014-51902-C2-1-R and TEC2014-61906-EXP, and the Valencian Conselleria d'Educacion, Cultura i Esport under grant PROMETEOII/2014/034.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Classical emergence of intrinsic spin-orbit interaction of light at the nanoscale

  • Vázquez-Lozano, Juan Enrique
  • Martínez, Alejandro|||0000-0001-5448-0140
[EN] Traditionally, in macroscopic geometrical optics intrinsic polarization and spatial degrees of freedom of light can be treated independently. However, at the subwavelength scale these properties appear to be coupled together, giving rise to the spin-orbit interaction (SOI) of light. In this work we address theoretically the classical emergence of the optical SOI at the nanoscale. By means of a full-vector analysis involving spherical vector waves we show that the spin-orbit factorizability condition, accounting for the mutual influence between the amplitude (spin) and phase (orbit), is fulfilled only in the far-field limit. On the other side, in the near-field region, an additional relative phase introduces an extra term that hinders the factorization and reveals an intricate dynamical behavior according to the SOI regime. As a result, we find a suitable theoretical framework able to capture analytically the main features of intrinsic SOI of light. Besides allowing for a better understanding into the mechanism leading to its classical emergence at the nanoscale, our approach may be useful to design experimental setups that enhance the response of SOI-based effects., The authors are grateful to F. J. Rodriguez-Fortuno for valuable comments and discussions. This work was supported by fundings from Ministerio de Economia y Competitividad (MINECO) of Spain under Contract No. TEC2014-51902-C2-1-R.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Coherent Control of a Plasmonic Nanoantenna Integrated on a Silicon Chip

  • Espinosa-Soria, Alba
  • Pinilla-Cienfuegos, Elena|||0000-0002-3734-0821
  • Díaz-Fernández, Francisco J.|||0000-0002-4247-2589
  • Griol Barres, Amadeu
  • Martí Sendra, Javier
  • Martínez, Alejandro|||0000-0001-5448-0140
[EN] Illuminating a plasmonic nanoantenna by a se of coherent light beams should tremendously modify its scattering, absorption and polarization properties, thus, enabling all-optical dynamic manipulation. However, diffraction inherently makes coherent control of isolated subwavelength-sizecl nanoantennas highly challenging when Uninitiated from free-space. Here, we overcome this limitation by placing the nanoantenna at a subwavelength distance of the output facet of silicon, waveguides that provide monolithically defined paths for multibeam coherent illumination. Inspired by coherent perfect absorption (CPA) concepts, we demonstrate experimentally modulation of the nanoantenna scattering by more than 1 order of magnitude and of the on-chip transmfission by > 50% over a similar to 200 nm bandwidth at telecom wavelengths by changing the phase between two counter-directional coherent guided beams. Moreover, we demonstrate coherent synthesis of polarization of the radiated field by illuminating the nanoantenna from orthogonal waveguides. Our finding paves the way toward coherent manipulation of nanoantennas and all-optical processing without nonlinearities in art integrated platform., All the authors acknowledge support from the Spanish Ministry of Economy and Competiveness (MINECO): A.E.-S. under Grant BES-2015-073146, E.P.-C. under Grant FJCI-2015-27228, F.J.D.-F. under Grant TEC2015-63838-C3-1-R, and A.M. under Grants TEC2014-51902-C2-1-R and TEC2014-61906-EXP.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

On-Chip Optimal Stokes Nanopolarimetry Based on Spin-Orbit Interaction of Light

  • Espinosa Soria, Alba
  • Rodríguez Fortuño, Francisco José
  • Griol Barres, Amadeu
  • Martínez, Alejandro|||0000-0001-5448-0140
[EN] Full measurement of the polarization of light at the nanoscale is expected to be crucial in many scientific and technological disciplines. Ideally, such measurements will require miniaturized Stokes polarimeters able to determine polarization nondestructively, locally, and in real time. For maximum robustness in measurement, the polarimeters should also operate optimally. Recent approaches making use of plasmonic nanostructures or metasurfaces are not able to fulfill all these requirements simultaneously. Here, we propose and demonstrate a method for subwavelength-footprint Stokes nanopolarimetry based on spin-orbit interaction of light. The method, which basically consists on a subwavelength scatterer coupled to a (set of) multimode waveguide(s), can fully determine the state of polarization satisfying all the previous features. Remarkably, the nanopolarimetry technique can operate optimally (we design a nanopolarimeter whose polarization basis spans 99.7% of the maximum tetrahedron volume inside the Poincaré sphere) over a broad bandwidth. Although here experimentally demonstrated on a silicon chip at telecom wavelengths, spin-orbit interaction-based nanopolarimetry is a universal concept to be applied in any wavelength regime or technological platform., A.M. acknowledges support from the Spanish Ministry of Economy and Competiveness (MINECO) under grant TEC2014-51902-C2-1-R and the Valencian Conselleria d'Educacion, Cultura i Esport under grant PROMETEOII/2014/034. FJ.R.-F. acknowledges support from the European Research Council under project ERC-2016-STG-714151-PSINFONI. A.E.-S. acknowledges support from the Spanish Ministry of Economy and Competiveness (MINECO) under grant BES-2015-073146.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Tesis doctoral (DoctoralThesis)

Spin-Dependent Optical Phenomena: Fundamentals and Applications

  • Vázquez Lozano, Juan Enrique
[ES] Al igual que la masa o la carga, el espín es una propiedad física fundamental que, típicamente, aparece en la descripción de los sistemas cuánticos. Más allá de sus importantes implicaciones teóricas, el creciente avance de la tecnología y el desarrollo de los dispositivos hacia escalas cada vez más pequeñas ha favorecido el surgimiento de multitud de aplicaciones que involucran al espín, entre las cuales se destaca la espintrónica; una nueva forma de electrónica en la que, además de la carga, también se explotan los grados de libertad otorgados por el espín del electrón. Por supuesto, el espín no es exclusivo de los electrones, está presente en todas las partículas elementales, y por ende, en los fotones. En este caso, y a diferencia de lo que ocurre con los electrones, existe una correspondencia clásica que relaciona el espín del fotón con los estados de polarización circular de la luz. Por lo tanto, en nano-óptica y en fotónica, los fenómenos basados en el espín se refieren, grosso modo, a aquellos que son fuertemente dependientes de la polarización circular de la luz. En este marco general, uno de los ejemplos más preponderantes se halla en la interacción espín-órbita. En su versión óptica establece que, bajo ciertas condiciones, es posible que exista una influencia mutua entre el estado de polarización (espín) y la propagación (órbita) de la luz. A pesar de su carácter ubicuo en todos los procesos ópticos básicos, sus efectos son muy débiles, y su manifestación se restringe a la nanoescala, lo cual dificulta su observación e identificación. En este mismo contexto, otro concepto heredado del formalismo cuántico que tiene análogo fotónico directo es la quiralidad óptica; una propiedad dinámica local que, de alguna manera, permite cuantificar escalarmente el espín de un campo óptico. Aparte de su controvertido significado físico y su estrecho vínculo con los sistemas plasmónicos y los metamateriales, como amplificadores de sus efectos, su principal característica fundamental es que, para los campos ópticos en el vacío, es una cantidad conservada. En esta tesis se ahonda teóricamente en los fundamentos básicos de estas características fotónicas. Específicamente, se demuestra analíticamente que la interacción espín-órbita es un fenómeno que surge natural y necesariamente en la nanoescala. Sobre esta base se expone un formalismo para extender la excitación unidireccional de campo cercano más allá de la aproximación dipolar, lo cual facilita su observación y mejora las propiedades de acoplo. Por otra parte, se analiza el concepto de la quiralidad óptica, originalmente definida en el vacío, y se generaliza a cualquier tipo de medio, incluyendo sistemas altamente dispersivos. Asimismo, se exploran diferentes configuraciones que permitan implementar las principales funcionalidades quirópticas (sensado y espectroscopía) en plataformas de fotónica integrada. Además de su potencial para aplicaciones, este estudio tiende un puente para abordar clásicamente propiedades y efectos que tradicionalmente son de tipo cuántico., [CA] Igual que la massa o la càrrega, l'espín és una propietat física fonamental que, típicament, apareix en la descripció dels sistemes quàntics. Més enllà de les seves importants implicacions teòriques, el creixent avanç de la tecnologia i el desenvolupament dels dispositius cap a escales cada vegada més petites ha afavorit el sorgiment de multitud d'aplicacions que involucren l'espín, entre les quals es destaca l'espintrònica; una nova forma d'electrònica en què, a més de la càrrega, també s'exploten els graus de llibertat atorgats per l'espín de l'electró. Per descomptat, l'espín no és exclusiu dels electrons, és present en totes les partícules elementals, i per tant, en els fotons. En aquest cas, i a diferència del que passa amb els electrons, hi ha una correspondència clàssica que relaciona l'espín del fotó amb els estats de polarització circular de la llum. Per tant, en nano-òptica i en fotònica, els fenòmens basats en l'espín es refereixen, grosso modo, a aquells que són fortament dependents de la polarització circular de la llum. En aquest marc general, un dels exemples més preponderants es troba en la interacció espín-òrbita. En la seva versió òptica estableix que, sota certes condicions, és possible que hi hagi una influència mútua entre l'estat de polarització (espín) i la propagació (òrbita) de la llum. Malgrat el seu caràcter ubic en tots els processos òptics bàsics, els seus efectes són molt febles, i la seva manifestació es restringeix a la nanoescala, la qual cosa dificulta la seva observació i identificació. En aquest mateix context, un altre concepte heretat del formalisme quàntic que té anàleg fotònic directe és la quiralitat òptica; una propietat dinàmica local que, d'alguna manera, quantifica escalarment l'espín d'un camp òptic. A banda del seu controvertit significat físic i el seu estret vincle amb els sistemes plasmònics i els metamaterials, com amplificadors dels seus efectes, la seva principal característica fonamental és que, per als camps òptics en el buit, és una quantitat conservada. Des d'un enfocament teòric, aquesta tesi aprofundeix en els fonaments bàsics d'aquestes característiques fotòniques. Específicament, es demostra analíticament que la interacció espín-òrbita és un fenomen que sorgeix natural i necessàriament en la nanoescala. Sobre aquesta base s'exposa un formalisme per estendre l'efecte d'excitació unidireccional de camp pròxim més enllà de l'aproximació dipolar, la qual cosa facilita la seva observació i millora les propietats d'acoblo. D'altra banda, s'analitza el concepte de la quiralitat òptica, originalment definida en el buit, i es generalitza a qualsevol tipus de mitjà, incloent sistemes altament dispersius. Així mateix, s'exploren diferents configuracions que permetin implementar les principals funcionalitats quiròptiques (sensat i espectroscòpia) en plataformes de fotònica integrada. A més del seu potencial per a aplicacions, aquest estudi tendeix un pont per abordar clàssicament propietats i efectes tradicionalment quàntics., [EN] Just like mass or charge, spin is a fundamental physical property that, typically, appears in the description of quantum systems. Beyond its important theoretical implications, the rapid advance of technology along with the relentless trend toward the development of devices at increasingly smaller scales have boosted the occurrence of a wide range of applications involving spin, among which is highlighted the spintronics; a novel form of electronics which, besides the charge, also exploits the degrees of freedom provided by the electron spin. Of course, the spin is not exclusive to electrons, but is actually present in all the elementary particles, and therefore in photons. In such a case, and unlike what happens with electrons, there exists a direct classical correspondence relating the spin of photons with the circular polarization states of light. Thus, in nano-optics and photonics, spin-dependent phenomena are broadly referred to as those that strongly rely upon the circular polarization of light. Within this general framework, one of the most preponderant examples is found in the spin-orbit interaction. In its optical version, it states that, under certain conditions, it is possible that there exists a mutual influence between the state of polarization (spin) and the propagation (orbit) of light. Despite its ubiquitous character in all basic optical processes, its effects are very weak, and its manifestation is restricted at the nanoscale, thereby hindering its observation and identification. In this same context, another concept somehow inherited from the quantum formalism with a direct photonic analogue is the optical chirality; a local dynamical property that, in a way, allows one to quantifying scalarly the spin of an optical field. Apart from its controversial physical meaning and its close relationship with plasmonic systems and metamaterials, often regarded as chiral enhancers, its main feature is that, for optical fields in the vacuum, it is a conserved quantity. From a theoretical standpoint, this thesis delves into the basics of these photonic traits. Specifically, it is analytically demonstrated that the spin-orbit interaction is indeed a phenomenon that naturally and necessarily emerges at the nanoscale. Building on this, it is addressed a formalism to extend the effect of near-field unidirectional excitation beyond the dipolar approximation, thus facilitating its observation and improving the coupling performance. On the other side, the optical chirality, originally put forward for electromagnetic fields in vacuum, is thoroughly analyzed and generalized to any arbitrary medium, including highly dispersive systems. Furthermore, different configurations for implementing the main chiroptical functionalities (sensing and spectroscopy) in integrated photonic platforms are explored. Besides its potential for applications, this study lays a bridge to classically approach features and effects which are traditionally quantum-like., This work was supported by fundings from Ministerio de Economía y Competitividad of Spain (MINECO) under Contract No.TEC2014-51902-C2-1-R. and by ERC Starting Grant No. ERC-2016-STG-714151-PSINFONI. This work was also partially supported by funding from the European Commission Project THOR H2020-EU-829067.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Transverse Spin and Spin-Orbit Coupling in Silicon Waveguides

  • Espinosa Soria, Alba
  • Martínez, Alejandro|||0000-0001-5448-0140
Evanescent and tightly confined propagating waves exhibit a remarkable transverse spin density since the longitudinal component of the electric field is not negligible. In this work, we obtain via numerical simulations the electric field components of the fundamental guided modes of two waveguides typically used in silicon photonics: the strip and the slot waveguide. We obtain the relation between transverse and longitudinal field components, the transverse spin densities and other important parameters, such as the longitudinal component of the so-called Belinfante s spin momentum density. By asymmetrically placing a circularly-polarized point-like dipole source in regions showing local circular polarization, the guided mode is excited unidirectionally via spin-orbit coupling. In contrast to metal plates supporting surface plasmons, the multimode behavior of silicon waveguides results in different spin-orbit coupling properties for each guided mode. Our results may find application in silicon photonic devices, integrated quantum optics and polarization manipulation at the nanoscale., This work was supported in part by the Secretaria de Estado de Investigacion, Desarrollo e Innovacion under Grant TEC2014-51902-C2-1-R and in part by the Valencian Conselleria d'Educacio, Cultura i Esport under Grant PROMETEOII/2014/034.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Optical Chirality in Dispersive and Lossy Media

  • Vázquez-Lozano, Juan Enrique
  • Martínez, Alejandro|||0000-0001-5448-0140
[EN] Several dynamical properties of electromagnetic waves such as energy, momentum, angular momentum, and optical helicity have been recently reexamined in dispersive and lossless media. Here, we address an alternative derivation for the optical chirality, extending it so as to include dissipative effects as well. To this end, we first elaborate on the most complete form of the conservation law for the optical chirality, without any restrictions on the nature of the medium. As a result we find a general expression for the optical chirality density both in lossless and lossy dispersive media. Our definition is perfectly consistent with that originally introduced for electromagnetic fields in free space, and is applicable to any material system, including dielectrics, plasmonic nanostructures, and left-handed metamaterials., The authors are grateful to C. Garcia-Meca for valuable comments and discussions. This work was supported by funding from Ministerio de Economia y Competitividad (MINECO) of Spain under Contract No. TEC2014-51902-C2-1-R.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Diffusive-light invisibility cloak for transient illumination

  • Orazbayev, Bakhtiyar
  • Beruete, Miguel
  • García Meca, Carlos
  • Martínez, Alejandro|||0000-0001-5448-0140
Invisibility in a diffusive-light-scattering medium has been recently demonstrated by employing a scattering-cancellation core-shell cloak. Unlike nondiffusive cloaks, such a device can be simultaneously macroscopic, broadband, passive, polarization independent, and omnidirectional. Unfortunately, it has been verified that this cloak, as well as more sophisticated ones based on transformation optics, fail under pulsed illumination, invalidating their use for a variety of applications. Here, we introduce a different approach based on unimodular transformations that enables the construction of unidirectional diffusive-light cloaks exhibiting a perfect invisibility effect, even under transient conditions. Moreover, we demonstrate that a polygonal cloak can extend this functionality to multiple directions with a nearly ideal behavior, while preserving all other features. We propose and numerically verify a simple cloak realization based on a layered stack of two isotropic materials. The studied devices have several applications not addressable by any of the other cloaks proposed to date, including shielding from pulse-based detection techniques, cloaking undesired scattering elements in time-of-flight imaging or high-speed communication systems for diffusive environments, and building extreme optical security features. The discussed cloaking strategy could also be applied to simplify the implementation of thermal cloaks., This work was supported in part by the Spanish Ministerio de Economia y Competitividad under Contracts No. TEC2014-51902-C2-1-R and No. TEC2014- 51902-C2-2-R. B.O. is sponsored by the Spanish Ministerio de Economia y Competitividad under Grant No. FPI BES-2012-054909. M.B. is sponsored by the Spanish Ministerio de Economia y Competitividad via Grant No. RYC-2011-08221. C.G.-M. acknowledges support from Generalitat Valenciana through the VALi+d postdoctoral program (Grant No. APOSTD/2014/044).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Lateral forces on circularly polarizable particles near a surface

  • Rodríguez Fortuño, Francisco José
  • Engheta, Nader
  • Zayats, Anatoly V.
  • Martínez, Alejandro|||0000-0001-5448-0140
Optical forces allow manipulation of small particles and control of nanophotonic structures with light beams. While some techniques rely on structured light to move particles using field intensity gradients, acting locally, other optical forces can push particles on a wide area of illumination but only in the direction of light propagation. Here we show that spin orbit coupling, when the spin of the incident circularly polarized light is converted into lateral electromagnetic momentum, leads to a lateral optical force acting on particles placed above a substrate, associated with a recoil mechanical force. This counterintuitive force acts in a direction in which the illumination has neither a field gradient nor propagation. The force direction is switchable with the polarization of uniform, plane wave illumination, and its magnitude is comparable to other optical forces., This work has been supported, in part, by EPSRC (UK). A.V.Z. acknowledges support from the Royal Society and the Wolfson Foundation. N.E. acknowledges partial support from the US Office of Naval Research Multidisciplinary University Research Initiative Grant No. N00014-10-1-0942. A.M. acknowledges support from the Spanish Government (contract Nos TEC2011-28664-C02-02 and TEC2014-51902-C2-1-R).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Exploiting metamaterials, plasmonics and nanoantennas concepts in silicon photonics

  • Rodríguez Fortuño, Francisco José
  • Espinosa-Soria, Alba
  • Martínez, Alejandro|||0000-0001-5448-0140
[EN] The interaction of light with subwavelength metallic nano-structures is at the heart of different current scientific hot topics, namely plasmonics, metamaterials and nanoantennas. Research in these disciplines during the last decade has given rise to new, powerful concepts providing an unprecedented degree of control over light manipulation at the nanoscale. However, only recently have these concepts been used to increase the capabilities of light processing in current photonic integrated circuits (PICs), which traditionally rely only on dielectric materials with element sizes larger than the light wavelength. Amongst the different PIC platforms, silicon photonics is expected to become mainstream, since manufacturing using well-established CMOS processes enables the mass production of low-cost PICs. In this review we discuss the benefits of introducing recent concepts arisen from the fields of metamaterials, plasmonics and nanoantennas into a silicon photonics integrated platform. We review existing works in this direction and discuss how this hybrid approach can lead to the improvement of current PICs enabling novel and disruptive applications in photonics., AM and AE-S acknowledge funding from contracts TEC2014-51902-C2-1-R and TEC2014-61906-EXP (MINECO/FEDER, UE) and, FR-F acknowledges funding from EPSRC (UK).
ReDivia Repositorio Digital del Instituto Valenciano de Investigaciones Agrarias
Publicación Artículo científico (JournalArticle)

Honeydew of HLB vector, Trioza erytreae, increases longevity, egg load and parasitism of its main parasitoid Tamarixia dryi

  • Urbaneja-Bernat, Pablo
  • González-Cabrera, Joel
  • Hernández-Suárez, Estrella
  • Tena, Alejandro
Trioza erytreae (Del Guercio) (Hemiptera: Triozidae) is one of the vectors of the citrus greening or huanglongbing (HLB) disease, the most devastating citrus disease globally. A classical biological control program has been established to control this vector in Europe, where it has been threatening the citrus industry since its detection in mainland Spain and Portugal. For this, its main parasitoid Tamarixia dryi (Waterson) (Hymenoptera: Eulophidae) has been introduced. Here, we evaluated the nutritional value of T. erytreae honeydew as a suitable food source for T. dryi. This solid honeydew is the most abundant food source for the parasitoid in the field. Our results demonstrated that T. erytreae honeydew enhanced the longevity of T. dryi compared to other diets such as water, ‘sucrose alone’ or ‘sucrose + protein’. Females fed on honeydew also oviposited more eggs than those fed on water or ‘sucrose alone’. Finally, T. dryi fed on honeydew tended to parasitize more psyllids than those fed on the other diets. Chemical analyses demonstrated that T. erytreae honeydew contains proteins, and this can explain the increase in egg load of honeydew fed parasitoids. Further research is necessary to understand why these females tended to parasitize more than females fed on ‘sucrose + protein’. Overall, these results contribute to understanding the successful and rapid establishment of T. dryi in Europe and to the successful rearing and release programs in newly invaded areas.
ReDivia Repositorio Digital del Instituto Valenciano de Investigaciones Agrarias
Publicación Artículo científico (JournalArticle)

Implementation and assessment of the classical biological control program against the huanglongbing vector, Trioza erytreae, in the Canary islands

  • Pérez-Rodríguez, Jésica
  • Suárez-Méndez, Laura
  • Urbaneja, Alberto
  • Hernández-Suárez, Estrella
  • Tena, Alejandro
The African citrus psyllid Trioza erytreae (Del Guercio) (Hemiptera: Triozidae) is one of the most threatening pests for Mediterranean citriculture. It vectors the phloem-limited bacteria Candidatus liberibacter spp, the causal agent of huanglongbing (HLB), the most devastating citrus disease worldwide. Although HLB has yet to be recorded in Europe, T. erytreae has established in the Macaronesia Islands of Madeira (Portugal) and the Canary Islands (Spain), and in mainland Europe. In 2017, a classical biological control program was implemented, and Tamarixia dryi (Waterston) (Hymenoptera: Eulophidae) was released in an experimental citrus orchard in the Canarian Island of Tenerife in the spring of 2018. This study aimed to analyze I) the distribution and spatio-temporal dispersion of T. dryi, II) the seasonal trend of T. erytreae and parasitism rates of T. dryi in the field and III) the effect of T. dryi on T. erytreae population densities in the Canary Islands three consecutive years after the release of the parasitoid. Our results showed that T. dryi successfully established in the island of Tenerife and dispersed in four out of five surrounding islands where T. erytreae was present. Two years after the release of T. dryi, the proportion of sites infested by the psyllid decreased from more than 80% to less than 5% in the three main islands: Tenerife, La Palma, and Gran Canaria. Furthermore, the population density of T. erytreae was extremely low in the sites where it was present two and three years after the release of T. dryi. Parasitism rates remained higher than 40% throughout the sampling periods. Overall, our three-year study shows that the parasitoid T. dryi reduced and controlled the Candidatus liberibacter spp vector, the causal agent of HLB, T. erytreae in the Canary Islands.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Wood zone plate fishnet metalens

  • Orazbayev, Bakhtiyar
  • Beruete Díaz, Miguel
  • Navarro Cía, Miguel
UPNa. Departamento de Ingeniería Eléctrica y Electrónica. Laboratorio de fotónica TERALAB, Fresnel-zone plate lenses provide focusing performance while having low profile. Unfortunately, they usually display higher reflection losses than conventional dielectric lenses. Here, we demonstrate a low-profile Wood zone plate metalens based on the fishnet metamaterial working in a near-zero regime with an equivalent refractive index less than unity (nf = 0.51). The metalens is made of alternating dielectric and fishnet metamaterial concentric rings. The use of fishnet metamaterial allows reducing the reflections from the lens, while maintaining low profile, low cost and ease of manufacturing. The lens is designed towork at theW-band of the millimeter-waves range with a focal length FL = 22.8 mm (7.5 λ0) aiming at antenna or radar system applications. The focusing per- formance of the lens along with its radiation characteristics in a lens antenna configuration have been studied numerically and confirmed experimentally, showing a gain improvement of ~2.5 dB with respect to a fishnet Soret metalens., This work was sponsored by Spanish Government under contract TEC2014-51902-C2-2-R. B. O. is sponsored by Spanish Ministerio de Economía y Competitividad under grant FPI BES-2012-054909. M. B. is sponsored by the Spanish Government via RYC-2011-08221.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Super-oscillatory metalens at terahertz for enhanced focusing with reduced side lobes

  • Legaria Lerga, Santiago
  • Pacheco-Peña, Víctor
  • Beruete Díaz, Miguel
In this paper, we design and numerically demonstrate an ultra-thin super-oscillatory metalens with a resolution below the diffraction limit. The zones of the lens are implemented using metasurface concepts with hexagonal unit cells. This way, the transparency and, hence, efficiency is optimized, compared to the conventional transparent–opaque zoning approach that introduces, inevitably, a high reflection in the opaque regions. Furthermore, a novel two-step optimization technique, based on evolutionary algorithms, is developed to reduce the side lobes and boost the intensity at the focus. After the design process, we demonstrate that the metalens is able to generate a focal spot of 0.46λ0 (1.4 times below the resolution limit) at the design focal length of 10λ0 with reduced side lobes (the side lobe level being approximately −11 dB). The metalens is optimized at 0.327 THz, and has been validated with numerical simulations., This research was funded by the Spanish Ministerio de Economía y Competitividad with European Union Fondo Europeo de Desarrollo Regional (FEDER) funds, grant number TEC2014-51902-C2-2-R.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Ku band low profile asymmetric Bull’s-Eye antenna with reduced side lobes and monopole feeding

  • Beaskoetxea Gartzia, Unai
  • Torres García, Alicia E.
  • Beruete Díaz, Miguel
In this paper, a linearly polarized low profile and asymmetric Bull’s-Eye leaky wave antenna fed by a monopole operating at 13 GHz is presented. Broadside radiation from the monopole is achieved by surrounding it with an asymmetric array of semicircular metallic strips on a grounded dielectric slab. With this implementation we demonstrate high gain with a weight of less than 80 g and lower side lobe levels compared to previous designs fed by a resonant slot. The measured antenna shows an experimental gain of 19.4 dBi with only 5 periods and a side lobe level of −16 dB (−20.3 dB for the numerical ideal case at f = 12.6 GHz), along with a narrow 6º beamwidth, This work was supported by the Spanish Ministerio de Economía y Competitividad (MINECO) with contract TEC2014-51902-C2-2-R. U.B and A.T. acknowledge the funding provided by UPNA via the FPI PhD grant program.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Synthesis of one dimensional electromagnetic bandgap structures with fully controlled parameters

  • Arnedo Gil, Israel
  • Chudzik, Magdalena
  • Percaz Ciriza, Jon Mikel
  • Arregui Padilla, Iván
  • Teberio Berdún, Fernando
  • Benito Pertusa, David
  • Lopetegui Beregaña, José María
  • Gómez Laso, Miguel Ángel
In this paper, we propose a novel synthesis strategy for the design of one dimensional electromagnetic bandgap (1- D-EBG) structures where all the performance parameters of these devices can fully be controlled, i.e., the central frequency of the forbidden band, its attenuation level and bandwidth, and the ripple level at the passbands. The novel synthesis strategy employs a new inverse-scattering technique to accurately synthesize the 1-D-EBG structure, targeting a properly interpolated version of a classical periodic filter fulfilling the required frequency specifications. The new inverse-scattering technique follows a continuous layer peeling approach and relies on the coupled-mode theory to precisely model the microwave structures. Telecommunication and radar systems, as well as material characterization devices, will be profited by this proposal with which enhanced filters, sensors, power dividers, couplers, mixers, oscillators, and amplifiers can be designed in many different technologies. As a proof of concept, a 1-D-EBG structure in microstrip technology with a single forbidden band (free of spurious stopband replicas), with attenuation level of 30 dB, fractional bandwidth larger than 100%, and return loss level at the passbands of 20 dB, has been designed and fabricated. The measurements obtained are in very good agreement with the simulations and target specifications, being free of spurious replicas up to the 15th harmonic, showing the robustness and very good performance of the novel design strategy proposed., This work was supported by MINECO (Spain) under Projects TEC2014-51902-C2-2-R and TEC2014-55735-C3-R.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

One-way quasiplanar terahertz absorbers using nonstructured polar dielectric layers

  • Rodríguez Ulibarri, Pablo
  • Serebryannikov, Andriy E.
  • Beruete Díaz, Miguel
A concept of quasiplanar one-way transparent terahertz absorbers made of linear isotropic materials is presented. The resulting structure consists of a homogeneous absorbing layer of polar dielectric, GaAs, a dispersion-free substrate, and an ultrathin frequency-selective reflector. It is demonstrated that perfect absorption can be obtained for forward illumination, along with total reflection at backward illumination and transparency windows in the adjacent bands. The design is particularized for the polaritonic gap range where permittivity of GaAs varies in a wide range and includes epsilon-near-zero and transparency regimes. The underlying physics can be explained with the aid of a unified equivalent-circuit (EC) analytical model. Perfect matching of input impedance in forward operation and, simultaneously, strong mismatch in the backward case are the universal criteria of one-way absorption. It is shown that perfect one-way absorption can be achieved at rather arbitrary permittivity values, provided these criteria are fulfilled. The EC results are in good agreement with full-wave simulations in a wide range of material and geometrical parameters. The resulting one-way absorbers are very compact and geometrically simple, and enable transparency in the neighboring frequency ranges and, hence, multifunctionality that utilizes both absorption- and transmission-related regimes., This work is supported by the Spanish Ministerio de Economía y Competitividad (MINECO) (TEC2014-51902- C2-2-R). P.R.U. is sponsored by the Public University of Navarra via a predoctoral scholarship, and A.E.S. is sup- ported by the National Science Center of Poland (NCN) (MetaSel DEC-2015/17/B/ST3/00118). We are very thankful to Prof. S. Nojima, YCU (Yokohama, Japan), for valuable discussions.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Tunable beam steering enabled by graphene metamaterials

  • Orazbayev, Bakhtiyar
  • Beruete Díaz, Miguel
  • Khromova, Irina
We demonstrate tunable mid-infrared (MIR) beam steering devices based on multilayer graphene-dielectric metamaterials. The effective refractive index of such metamaterials can be manipulated by changing the chemical potential of each graphene layer. This can arbitrarily tailor the spatial distribution of the phase of the transmitted beam, providing mechanisms for active beam steering. Three different beam steerer (BS) designs are discussed: a graded-index (GRIN) graphene-based metamaterial block, an array of metallic waveguides filled with graphene-dielectric metamaterial and an array of planar waveguides created in a graphene-dielectric metamaterial block with a specific spatial profile of graphene sheets doping. The performances of the BSs are numerically analyzed, showing the tunability of the proposed designs for a wide range of output angles (up to approximately 70°). The proposed graphene-based tunable beam steering can be used in tunable transmitter/receiver modules for infrared imaging and sensing., This work was supported in part by the Spanish Government under Contract TEC2014- 51902-C2-2-R and the Government of the Russian Federation [Grant No. 074-U01]. B. O. is sponsored by the Spanish Ministerio de Economía y Competitividad under grant FPI BES- 2012-054909. M.B. is sponsored by the Spanish Government via RYC-2011-08221. I.K. is sponsored by the Russian Foundation for Basic Research under grant No. 14-07-31272.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Phase reversal technique applied to fishnet metalenses

  • Pacheco-Peña, Víctor
  • Minin, Igor V.
  • Minin, Oleg V.
  • Beruete Díaz, Miguel
In this work, the fishnet metamaterial is applied to several converging metalenses by combining the zoning, reference phase, and phase reversal techniques. First, the zoning and reference phase techniques are implemented in several metalenses at 55 GHz ( λ 0 = 5.45 m m ) with a short focal length of 1.5 λ 0 . Then, the phase reversal technique is applied to these metalenses by switching from a concave to a convex profile in order to change the phase distribution inside of them. The designs are evaluated both numerically and experimentally demonstrating that chromatic dispersion (the shift of the position of the focus at different frequencies) is reduced when using the phase-reversed profiles. It is shown how the position of the focus remains at the same location within a relatively broadband frequency range of ~4% around the design frequency without affecting the overall behaviour of the metalenses. The best performance is achieved with the design that combines both reference phase and phase reversal techniques, with an experimental position of the focus of 1.75 λ 0 , reduced side lobes, and a power enhancement of 6.5 dB. The metalenses designed here may find applications in situations where a wideband response and low side lobes are required because of the reduced chromatic aberrations of the focus., This work was partially supported by the Spanish Ministerio de Economía y Competitividad with European Union Fondo Europeo de Desarrollo Regional (FEDER) funds (TEC2014-51902-C2-2-R). Victor Pacheco-Peña is supported by Newcastle University (Newcastle University Research Fellow). Igor V. Minin and Oleg V. Minin were partially supported by the Mendeleev scientific fund of Tomsk State University.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

On the performance of the zoned fishnet metamaterial lens with positive and negative reference phase

  • Pacheco-Peña, Víctor
  • Minin, Igor V.
  • Minin, Oleg V.
  • Beruete Díaz, Miguel
In this letter, several converging fishnet metalenses are designed using both the zoning and reference phase techniques. They are engineered with a focal length of 1.5λ0 at the design frequency of 55 GHz (λ0 = 5.45 mm) at which the fishnet metamaterial has an effective refractive index of nlens = ∼0.68. Three metalenses are analyzed—with positive, negative, and without reference phase—in order to compare their performance. The focal properties are evaluated both numerically and experimentally, demonstrating a good agreement between them. The best performance is achieved for the zoned metalens with positive reference phase,with an experimental power enhancement at the focal length of 6.2 dB, better axial resolution (0.65λ0 ), and reduced lateral lobes compared to other designs, This work was supported by the Spanish Ministerio de Economía y Competitividad under contract TEC2014-51902- C2-2-R and partially by the Tomsk State University Competitiveness Improvement Program Nº 8.1.23.2015. V.P.-P.is sponsored by Spanish Ministerio de Educación, Cultura y Deporte under grant FPU AP-2012-3796. M.B. is sponsored by the Spanish Ministerio de Economía y Competitividad via RYC-2011-08221.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Producing and exploiting simultaneously the forward and backward coupling in EBG-assisted microstrip coupled lines

  • Percaz Ciriza, Jon Mikel
  • Chudzik, Magdalena
  • Arnedo Gil, Israel
  • Arregui Padilla, Iván
  • Teberio Berdún, Fernando
  • Gómez Laso, Miguel Ángel
  • Lopetegui Beregaña, José María
In this paper, a methodology is proposed for the design of EBG-assisted coupled line structures in microstrip technology, controlling independently the forward and backward coupling. It is based on the use of a single-frequency-tuned electromagnetic bandgap (EBG) structure to produce a single backward-coupled frequency band, in combination with the forward-coupled frequency bands produced by the difference between the even and odd mode propagation constants present in microstrip technology. Thus, the central frequency of the backward-coupled band is controlled by the period of the EBG structure, while the frequencies of the forward coupled bands are fixed by the length of the device. The rest of the frequencies go to the direct port giving rise to a device with the input port matched at all the frequencies and where the coupled bands are easily controllable by adjusting the corresponding design parameter. The novel methodology proposed has been successfully demonstrated by designing a triplexer intended for the GSM (900 MHz) and WLAN (2.4 GHz and 5.5 GHz) telecommunication bands., This work was supported by MINECO (Spain) under projects TEC2011-28664-C02-01 and TEC2014-51902-C2-2-R.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Diffusive-light invisibility cloak for transient illumination

  • Orazbayev, Bakhtiyar
  • Beruete Díaz, Miguel
  • Martínez, Alejandro
  • García Meca, Carlos
Invisibility in a diffusive-light-scattering medium has been recently demonstrated by employing a scattering-cancellation core-shell cloak. Unlike nondiffusive cloaks, such a device can be simultaneously macroscopic, broadband, passive, polarization independent, and omnidirectional. Unfortunately, it has been verified that this cloak, as well as more sophisticated ones based on transformation optics, fail under pulsed illumination, invalidating their use for a variety of applications. Here, we introduce a different approach based on unimodular transformations that enables the construction of unidirectional diffusive-light cloaks exhibiting a perfect invisibility effect, even under transient conditions. Moreover, we demonstrate that a polygonal cloak can extend this functionality to multiple directions with a nearly ideal behavior, while preserving all other features. We propose and numerically verify a simple cloak realization based on a layered stack of two isotropic materials. The studied devices have several applications not addressable by any of the other cloaks proposed to date, including shielding from pulse-based detection techniques, cloaking undesired scattering elements in time-of-flight imaging or high-speed communication systems for diffusive environments, and building extreme optical security features. The discussed cloaking strategy could also be applied to simplify the implementation of thermal cloaks., This work was supported in part by the Spanish Ministerio de Economía y Competitividad under contracts No. TEC2014- 51902-C2-1-R and No. TEC2014- 51902-C2-2-R. B.O. is sponsored by the Spanish Ministerio de Economía y Competitividad under Grant No. FPI BES-2012-054909. M.B. is sponsored by the Spanish Ministerio de Economía y Competitividad via Grant No. RYC-2011-08221. C.G.-M. acknowledges support from Generalitat Valenciana through the VALi+d postdoctoral program (Grant No. APOSTD/2014/044).
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Steering surface plasmons with a graded index dielectric medium

  • Beruete Díaz, Miguel
  • Pacheco-Peña, Víctor
This is a peer-reviewed, un-copyedited version of an article accepted for publication/published in Journal of Physics D: Applied Physics. IOP Publishing Ltd is not responsible for any errors or omissions in this version of the manuscript or any version derived from it. The Version of Record is available online at https://doi.org/10.1088/1361-6463/aae3a5., The arbitrary control of surface plasmon (SP) propagation has become an intense research topic for several decades. This is due to the fact that they can be used in a variety of fields such as optical trapping, nanoantennas and medical applications. In this communication, the graded index technique is applied in the design of several steerers able to tailor the direction of propagation of the incident SPs by simply changing the height of a dielectric block on top of a semi?infinite metal slab. The design procedure is shown and the structures are numerically evaluated demonstrating a good agreement with the analytical calculations, with the SPs deflected at the design angles (θ ranging from 10° to 60°) with a wide bandwidth steering of 60 nm around the design value (633 nm), V.P.-P. is supported by the Newcastle University (Newcastle University Research Fellow). M. B. acknowledges support by the Spanish Ministerio de Economía y Competitividad with European Union FEDER funds [TEC2014-51902-C2-2-R].
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

On the performance of an ENZ-based sensor using transmission line theory and effective medium approach

  • Pacheco-Peña, Víctor
  • Beruete Díaz, Miguel
  • Rodríguez Ulibarri, Pablo
  • Engheta, Nader
In this paper we perform an in-depth theoretical studyofa sensing platform based on epsilon-near- zero (ENZ) metamaterials. The structure proposed for sensing is a narrow metallic waveguide channel. An equivalent circuit model is rigorouslydeduced using transmission line theory, considering several configurations for a dielectric body (analyte sample) inserted within the narrow channel, showing good agreement with results obtained from numerical simulations. The transmission line model is able to reproduce even the most peculiar details ofthe sensing platform response. Its performance is then evaluated byvarying systematically the size, position and permittivity ofthe analyte, and height ofthe ENZ channel. It is shown that the sensor is capable ofdetecting changes in the permittivity/ refractive index or position even with deeplysubwavelength analyte sizes (∼0.05λ0), giving a sensitivity up to 0.03m/RIU and a figure ofMerit∼25. The effective medium approach is evaluated by treating the inhomogeneous cross-section ofthe analyte as a transmission line filled with a homogeneous material., VP-P is supported by the Newcastle University (Newcastle University Research Fellow). MB acknowledges support by the Spanish Ministerio de Economía y Competitividad under contract TEC2014-51902-C2-2-R. PR-U was sponsored by Public University of Navarra via a predoctoral scholarship. NE acknowledges the partial support from the Vannevar Bush Faculty Fellowship program sponsored by the Basic Research Office of the Assistant Secretary of Defense for Research and Engineering and funded by the Office of Naval Research through grant N00014-16-1-2029.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Tunable deflection and asymmetric transmission of THz waves using a thin slab of graphene-dielectric metamaterial, with and without ENZ components

  • Serebryannikov, Andriy E.
  • Hajian, Hodjat
  • Beruete Díaz, Miguel
  • Ozbay, Ekmel
  • Vandenbosch, Guy A. E.
Tunable deflection of obliquely incident, linearly polarized terahertz waves is theoretically studied in a wide frequency range around 20 THz, by combining a thin slab of graphene-dielectric metamaterial (with ten layers of graphene), a dielectric grating, and a uniform polar-dielectric slab operating in the epsilon-near-zero (ENZ) regime. The modulation of the deflection intensity and deflection angle is done by varying the chemical potential of graphene, and is realized with or without connection to the asymmetric transmission. It is shown to depend on the location of the graphene-dielectric metamaterial slab, as well as on the incidence angle. Four scenarios of tunable deflection are found, including the ones realizable in two-component structures without an ENZ slab., Narodowe Centrum Nauki (NCN), Poland (DEC-2015/17/B/ST3/00118 – Metasel); TUBITAK (113E331, 114E374, 115F560); EU Horizon-2020 via Marie Sklodowska-Curie IF program (grant no. 708200 – ADVANTA); Ministerio de Economía, Industria y Competitividad, Spain (TEC2014-51902-C2-2-R).
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Wide angle terahertz sensing with a cross-dipole frequency selective surface

  • Rodríguez Ulibarri, Pablo
  • Kuznetsov, Sergei A.
  • Beruete Díaz, Miguel
The following article appeared in Rodríguez-Ulibarri, P., Beruete, M., & Kuznetsov, S. (2016). Wide angle terahertz sensing with a cross-dipole frequency selective surface. Applied Physics Letters, 108(11), doi:10.1063/1.4944326 and may be found at http://dx.doi.org/doi:10.1063/1.4944326., In this work, a terahertz sensor based on a cross dipole frequency selective surface is analyzed and experimentally tested. The sensing structure is optimized for operation at the fundamental band- stop resonance near 0.7THz and characterized under normal and oblique incidence. The sensing performance as a function of the incidence angle and the wave polarization is evaluated with good agreement between simulations and measurements. It is shown that a figure of merit for the pro- posed sensor can be enhanced from 0.2 up to 0.6 due to switching from normal to oblique excita- tion, which yields the maximum performance for TM polarization at the incidence angle of 70º. The presented results demonstrate a wide angle operation regime in THz sensing that opens up an alternative approach in improving capabilities of sensing devices., This work was sponsored by the Spanish Government under Contract Nos. TEC2011-28664-C02-01 and TEC2014-51902-C2-2-R. P.R.-U. was sponsored by Public University of Navarra via a predoctoral scholarship. M.B. was sponsored by the Spanish Government via RYC-2011- 08221
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Extraordinary THz transmission with a small beam spot: the leaky wave mechanism

  • Navarro Cía, Miguel
  • Pacheco-Peña, Víctor
  • Kuznetsov, Sergei A.
  • Beruete Díaz, Miguel
This is the peer reviewed version of the following article: M. Navarro-Cía, V. Pacheco-Peña, S. A. Kuznetsov, M. Beruete: Extraordinary THz Transmission with a Small Beam Spot: The Leaky Wave Mechanism. Advanced Optical Materials 2018, 1701312, which has been published in final form at https://doi.org/10.1002/adom.201701312. This article may be used for non-commercial purposes in accordance with Wiley Terms and Conditions for Self-Archiving., The discovery of extraordinary optical transmission (EOT) through patterned metallic foils in the late 1990s was decisive for the development of plasmonics and cleared the path to employ small apertures for a variety of interesting applications all along the electromagnetic spectrum. However, a typical drawback often found in practical EOT structures is the large size needed to obtain high transmittance peaks. Consequently, practical EOT arrays are usually illuminated using an expanded (mimicking a plane wave) beam. Here, it is shown with numerical and experimental results in the THz range that high transmittance peaks can be obtained even with a reduced illumination spot exciting a small number of holes, provided that the structure has a sufficient number of lateral holes out of the illumination spot. These results shed more light on the prominent role of leaky waves in the underlying physics of EOT and have a direct impact on potential applications., This work was partially supported by the Spanish Ministerio de Economía y Competitividad with European Union Fondo Europeo de Desarrollo Regional (FEDER) funds [TEC2014-51902-C2-2-R]. M.N.-C. acknowledges support from University of Birmingham [Birmingham Fellowship]. V.P.-P. was sponsored by Spanish Ministerio de Educación, Cultura y Deporte [formación de profesorado universitario (FPU) AP-2012-3796]. S.A.K. acknowledges support from the Novosibirsk State University (NSU) program 5-100 established by the Russian Ministry of Education and Science.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Labyrinth metasurface absorber for ultra-high-sensitivity terahertz thin film sensing

  • Jáuregui López, Irati
  • Rodríguez Ulibarri, Pablo
  • Urrutia Azcona, Aitor
  • Kuznetsov, Sergei A.
  • Beruete Díaz, Miguel
In this work, a labyrinth metasurface sensor operating at the low‐frequency edge of the THz band is presented. Its intricate shape leads to a high electric field confinement on the surface of the structure, resulting in ultrasensitive performance, able to detect samples of the order of tens of nanometers at a wavelength of the order of millimeters (i.e., five orders of magnitude larger). The sensing capabilities of the labyrinth metasurface are evaluated numerically and experimentally by covering the metallic face with tin dioxide (SnO2) thin films with thicknesses ranging from 24 to 345 nm. A redshift of the resonant frequency is observed as the analyte thickness increases, until reaching a thickness of 20 μm, where the response saturates. A maximum sensitivity of more than 800 and a figure of merit near 4500 nm−1 are achieved, allowing discriminating differences in the SnO2 thickness of less than 25 nm, and improving previous works by a factor of 35. This result can open a new paradigm of ultrasensitive devices based on intricate metageometries overcoming the limitations of classical metasurface sensor designs based on periodic metaatoms., The authors acknowledge support from the Spanish Ministerio de Economía y Competitividad (MINECO) under Contract TEC2014-51902-C2-2-R, the NSU program 5-100 established by the Russian Ministry of Education and Science, and the State Assignment Program of the Rzhanov Institute of Semiconductor Physics SB RAS (Project No. 0306-2016-0020).
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Nonbianisotropic complementary split ring resonators as angular selective metasurfaces

  • Rodríguez Ulibarri, Pablo
  • Beruete Díaz, Miguel
In this work, a metasurface with unconventional angular performance and composed by a nonbianisotropic complementary split ring resonator (NB-CSRR) is analyzed numerically and experimentally. A numerical study comparing the performance with the original complementary split ring resonator is conducted, showing very interesting transmission properties, such as complete filtering under normal incidence and high transmission peaks at oblique incidence for the NB-CSRR metasurface. A bilayered NB-CSRR prototype working at millimeter waves with a total thickness of 100 μm (0.1 times the operation wavelength) is fabricated and tested with a good agreement between simulation results and experiments. Very exciting applications based on the presented structure, such as advanced angular selectivity devices with great rejection levels at normal incidence and angular sensing devices, can be envisaged., Ministerio de Economía y Competitividad (MINECO) (RYC-2011-08221, TEC2014-51902-C2-2-R).
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Annular apertures in metallic screens as extraordinary transmission and frequency selective surface structures

  • Rodríguez Ulibarri, Pablo
  • Navarro Cía, Miguel
  • Rodríguez Berral, Raúl
  • Mesa, Francisco
  • Medina, Francisco
  • Beruete Díaz, Miguel
A 2-D periodic array of annular apertures (or ring slots) is studied using an accurate circuit model. The model accounts for distributed and dynamic effects associated with the excitation of high-order modes operating above or below cutoff but not far from their cutoff frequencies. This paper allows to ascertain the substantial differences of the underlying physics when this structure operates as a classical frequency selective surface or in the extraordinary-transmission (ET) regime. A discussion of two different designs working at each regime is provided by means of the equivalent circuit approach (ECA), full wave simulation results, and experimental characterization. The agreement between the equivalent circuit calculation applied here and the simulation and experimental results is very good in all the considered cases. This validates the ECA as an efficient minimal-order model and a low computational-cost design tool for frequency selective surfaces and ET-based devices. Additional scenarios such as oblique incidence and parametric studies of the structural geometry are also considered., This work was supported in part by the Spanish Ministerio de Economía y Competitividad with the European Union FEDER funds under Project TEC2013-41913-P and Project TEC2014-51902-C2-2-R and in part by the Spanish Junta de Andalucía under Project P12-TIC-1435. The work of P. Rodríguez-Ulibarri was supported by the Universidad Pública de Navarra under a Pre-Doctoral Scholarship. The work of M. Navarro Cía was supported by the University of Birmingham under the Birmingham Fellowship
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Photonic nanojets with mesoscale high-index dielectric particles

  • Pacheco-Peña, Víctor
  • Beruete Díaz, Miguel
This article may be downloaded for personal use only. Any other use requires prior permission of the author and AIP Publishing. The following article appeared in V. Pacheco-Peña and M. Beruete. Photonic nanojets with mesoscale high-index dielectric particles. J. Appl. Phys.125, 084104 (2019). doi: 10.1063/1.5086175 and may be found at doi: http://dx.doi.org/10.1063/1.5086175., In this work, we demonstrate the ability of high-index dielectric particles immersed in air to generate photonic nanojets with extreme resolution (∼0.06λ0). Both 2D (cylindrical) and 3D (spherical) particles are analyzed, and their profile is truncated using the Weierstrass formulation for solid immersion lenses to produce a photonic nanojet at the output surface under plane wave illumination. Their focusing capability is evaluated in terms of the spatial resolution achieving subwavelength values of ∼0.14λ0 and ∼0.06λ0 for a truncated cylinder and sphere, respectively. The capability of the truncated sphere to enhance the backscattering produced by two small metallic spherical scatterers placed near the photonic nanojet is evaluated by using a scanning-probe microscopy configuration. The imaging capabilities of this technique are also analyzed by moving the metallic spheres in the transversal plane where the photonic nanojet is produced. The results presented here improve greatly the typical resolution of photonic nanojets generated with dielectric particles with a small index contrast. In addition, the high-index material allows using mesoscale particles, leading to a more compact setup. These results may find applications in areas such as microscopy, imaging, and sensing devices where a subwavelength resolution below the diffraction limit is needed., V.P.-P. is supported by the Newcastle University (Newcastle University Research Fellow). M.B. acknowledges the support by the Spanish Ministerio de Economía y Competitividad under Contract No. TEC2014-51902-C2-2-R.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Design procedure for new compact waffle-iron ilters with transmission zeros

  • Teberio Berdún, Fernando
  • Percaz Ciriza, Jon Mikel
  • Arregui Padilla, Iván
  • Martín Iglesias, Petronilo
  • Lopetegui Beregaña, José María
  • Gómez Laso, Miguel Ángel
  • Arnedo Gil, Israel
In this paper, a novel waffle-iron filter with transmission zeros at multiple frequencies, along with its design procedure, is presented. The proposed filter features a high-power behavior and a wide rejected band in a single compact structure by means of a set of transmission zeros that can also be placed close to the passband. Its design method rests on a divide-and-rule strategy, where the physical dimensions of the constituent design entities (DEs) can be easily computed in a very short time. A novel high-power compact waffle-iron filter with transmission zeros at multiple frequencies has been designed as well as several classical waffle-iron filters with transmission zeros at one frequency only, using a detailed step-by-step procedure which avoids the bruteforce optimizations needed until now. Multipactor and corona simulations have been conducted proving a high-power handling capability of 1.8 kW and 78.6 W, respectively. A prototype of the novel filter has been fabricated, obtaining a remarkable accordance between the simulated and measured results., This work was supported in part by the ESA’s Networking/Partnering Initiati ve under Contract 4000114859/15/NL/HK and in part by the MINECO (Spain) under Project TEC2017-85529-C3-2-R, Project TEC2014-55735-C3-R, and Project TEC2014-51902-C2-2-R. This paper is an expanded version from the 2018 International Microwave Sym- posium, Philadelphia, PA, USA, June 10–15 2018. (Corresponding author: Fernando Teberio.)
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Experimental demonstration of metasurface-based ultrathin carpet cloaks for millimetre waves

  • Orazbayev, Bakhtiyar
  • Mohammadi Estakhri, Nasim
  • Alù, Andrea
  • Beruete Díaz, Miguel
This is the peer reviewed version of the following article: B. Orazbayev, N. Mohammadi Estakhri, A. Alù, M. Beruete, Advanced Optical Materials 2017, 5, 1600606, which has been published in final form at http://dx.doi.org/10.1002/adom.201600606. This article may be used for non-commercial purposes in accordance with Wiley Terms and Conditions for Self-Archiving., A metasurface carpet cloak for millimeter-wave range with polarization-independent performance is experimentally demonstrated. It is shown that the cloak is able to mimic the ground plane by fully restoring the amplitude and phase distributions for both transverse electric and transverse magnetic polarizations, with a relatively wide frequency and angular widths response., This work was founded by the Spanish Ministerio de Economía y Competitividad with project TEC2014-51902-C2-2-R. M.B. acknowledges funding by the Spanish Ministerio de Economía y Competitividad with contract RYC-2011- 08221. N.M.E. and A.A. have been supported by the NSF CAREER Award No. ECCS-0953311 and the AFOSR Grant No. FA9550-13-1-0204.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

THz sensing with anomalous extraordinary optical transmission hole arrays

  • Jáuregui López, Irati
  • Rodríguez Ulibarri, Pablo
  • Kuznetsov, Sergei A.
  • Nikolaev, Nazar A.
  • Beruete Díaz, Miguel
Subwavelength hole array (HA) metasurfaces support the so-called extraordinary optical transmission (EOT) resonance that has already been exploited for sensing. In this work, we demonstrate the superior performance of a different resonant regime of HA metasurfaces called anomalous EOT, by doing a thorough numerical and experimental study of its ability in thin-film label-free sensing applications in the terahertz (THz) band. A comprehensive analysis using both the regular and anomalous EOT resonances is done by depositing thin layers of dielectric analyte slabs of different thicknesses on the structures in different scenarios. We carry out a detailed comparison and demonstrate that the best sensing performance is achieved when the structure operates in the anomalous EOT resonance and the analyte is deposited on the non-patterned side of the metasurface, improving by a factor between 2 and 3 the results of the EOT resonance in any of the considered scenarios. This can be explained by the comparatively narrower linewidth of the anomalous EOT resonance. The results presented expand the reach of subwavelength HAs for sensing applications by considering the anomalous EOT regime that is usually overlooked in the literature., This research was funded by the Spanish Ministerio de Economía y Competitividad with European Union Fondo Europeo de Desarrollo Regional (FEDER) funds, grant number TEC2014-51902-C2-2-R. The work was partially supported by the Russian Foundation for Basic Research (Project No. 17-32-80039, experimental study; Project No. 18-29-20066, technological implementation).
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Response of complementary split ring resonators in composite stratified substrate integrated waveguide

  • Pérez Escudero, José Manuel
  • Jarauta Ayensa, Eduardo
  • Falcone Lanas, Francisco
  • Beruete Díaz, Miguel
The following article appeared in Pérez-Escudero, J. M., Jarauta, E., Falcone, F., & Beruete, M. (2017). Response of complementary split ring resonators in composite stratified substrate integrated waveguide. Journal of Applied Physics, 121(19), 1. doi:10.1063/1.4983709 and may be found at http://dx.doi.org/10.1063/1.4983709., In this work, the behavior of a Complementary Split Ring Resonator (CSRR) operating within the quasi-static resonance regime and embedded in a composite stratified Substrate Integrated Waveguide (SIW) with two different dielectric layers is analyzed. In these conditions, the propagating modes within the SIW combined with the imposed non-symmetrical structure lead to the excitation of the CSRR elements inside the SIW at difference with conventional excitation. Several cases of CSRR loaded SIW are proposed, and their electromagnetic field components as well as their frequency response are analyzed, providing insight into the CSRR resonance excitation. A test prototype has been designed, fabricated, and measured, showing a good agreement with simulation results and providing a new alternative for the implementation of compact frequency selective devices compatible with planar technology and without undesired radiation loss., This work was sponsored by the Spanish Government under Contract No. TEC2014-51902-C2-2-R. M.B. was sponsored by the Spanish Government via RYC-2011-08221.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Strong angular dependence of resonant states in 2D dielectric cylinder rings

  • Andueza Unanua, Ángel María
  • Pérez Conde, Jesús
  • Sevilla Moróder, Joaquín
We investigate collective resonators made of dielectric cylinders assembled as two-dimensional regular octagons and decagons. These structures exhibit collective resonance states that change their intensity with the incident radiation angle. While most parts of the spectra present small or even null variation, one of these resonances presents high-sensitivity to the incidence angle. This strong variation is well characterized in terms of the electric field intensity distribution of a resonant state where all the cylinders show the lowest order Mie resonance and the neighbors alternate their polarities. The collective state is optimally excited when radiation impinges on a vertex of the polygonal arrangement of cylinders, while the response decreases to its minimum when the incident field hits an edge (two cylinders at the same time). The resonant state and its high dependence on the excitation incidence angle have been found in both octagonal and decagonal configurations for different dielectric permittivity values. In addition, the scalability of Maxwell equations warranties the same behavior if the whole system is downscaled to terahertz or optic frequencies. The study was performed by finite integration time domain calculations of scattering and transmission for different incidence angles. Experimental measures in the microwave range were taken from photonic molecule prototypes made of centimeter-scale glass cylinders (ϵ = 4.5). We find an overall excellent agreement between measurements and simulations. We propose that photonic molecules made of polygonal rings of dielectric cylinders are an ideal structure to build angle sensors using the strongly varying state that they present., This work has been supported by the Ministerio de Economía y Competitividad of Spain via Project No. TEC2014-51902-C2-2-R.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Wideband backscattering reduction at terahertz using compound reflection grating

  • Orazbayev, Bakhtiyar
  • Rodríguez Ulibarri, Pablo
  • Beruete Díaz, Miguel
Backscattering reduction is usually achieved by using either absorbers or diffractions gratings at the expense of a narrow bandwidth. In this paper, we propose a different strategy based on a metallic compound reflection grating (CRG). We demonstrate that this structure allows a strong and broadband (fractional bandwidth, FBW ≈57%) backscattering reduction in the terahertz (THz) range by efficiently transferring the incident energy to the diffracted modes. The design is analyzed in terms of equivalent circuit and numerical simulations and the results are corroborated by a manufactured prototype operating at 0.35 THz., MINECO (Project TEC2014-51902-C2-2-R); P.R.-U. sponsored by UPNA FPI PhD grant.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Accurate circuit modeling of fishnet structures for negative-index-medium applications

  • Torres Landívar, Víctor
  • Mesa, Francisco
  • Navarro Cía, Miguel
  • Rodríguez Berral, Raúl
  • Beruete Díaz, Miguel
  • Medina, Francisco
Metallic plates with a two-dimensional (2D) periodic distribution of sub-wavelength apertures are known to exhibit extraordinary transmission of electromagnetic waves. Stacking two or more of such plates gives place to the so-called fishnet structures, which constitute a popular way of achieving an effective negative index medium at frequencies ranging from microwaves to optics. Unfortunately, a general wideband equivalent circuit has not yet been proposed to facilitate its understanding and design. This work presents this circuit model with closed-form expressions for the circuit elements, thus making it possible to obtain the electrical response for this class of structures in a very efficient way. This procedure is much faster than alternative numerical methods at the same time that it retains a high level of accuracy when compared with some other oversimplified models. The circuit model also provides a simple rationale as well as a good physical insight in order to explain the qualitative behavior of such structures, independently of the number of stacked layers., This work was supported by the Spanish Ministry of Economy and Competitiveness with European Union Feder Funds (under grants TEC2011-28664-C02-01, TEC2014-51902-C2-2-R, TEC2013-41913-P, and Consolider EMET CSD2008-00066, and by the Spanish Junta de Andalucía under Project P12-TIC-1435). The work of M. Beruete was supported by the Spanish Government via RYC-2011-08221.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Rectangular waveguide filters with meandered topology

  • Teberio Berdún, Fernando
  • Percaz Ciriza, Jon Mikel
  • Arregui Padilla, Iván
  • Martín Iglesias, Petronilo
  • Lopetegui Beregaña, José María
  • Gómez Laso, Miguel Ángel
  • Arnedo Gil, Israel
In this paper, a new topology for rectangular waveguide bandpass and low-pass filters is presented. A simple, accurate, and robust design technique for these novel meandered waveguide filters is provided. The proposed filters employ a concatenation of ±90° E-plane mitered bends (±90° EMBs) with different heights and lengths, whose dimensions are consecutively and independently calculated. Each ±90° EMB satisfies a local target reflection coefficient along the device so that they can be calculated separately. The novel structures allow drastically reduce the total length of the filters and embed bends if desired, or even to provide routing capabilities. Furthermore, the new meandered topology allows the introduction of transmission zeros above the passband of the low-pass filter, which can be controlled by the free parameters of the ±90° EMBs. A bandpass and a low-pass filter with meandered topology have been designed following the proposed novel technique. Measurements of the manufactured prototypes are also included to validate the novel topology and design technique, achieving excellent agreement with the simulation results., This work was supported by ESA’s Networking/Partnering Initiative (NPI) under Contract 4000114859/15/NL/HK, Gobierno de Navarra under Project 0011-1365-2017-000130, and MINECO (Spain) under Projects TEC2014- 51902-C2-2-R and TEC2017-85529-C3-2-R.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Routing with classical corrugated waveguide low-pass filters with embedded bends

  • Teberio Berdún, Fernando
  • Percaz Ciriza, Jon Mikel
  • Arregui Padilla, Iván
  • Martín Iglesias, Petronilo
  • Lopetegui Beregaña, José María
  • Gómez Laso, Miguel Ángel
  • Arnedo Gil, Israel
A very simple design method to embed routing capabilities in classical corrugated filters is presented in this paper. The method is based on the calculation of the heights and lengths of the so-called filters design building blocks, by means of a consecutive and separate extraction of their local reflection coefficients along the device. The proposed technique is proved with a 17th-order Zolotarev filter whose topology is bent twice so that the input and output ports are in the same plane while preserving the in-line filters behaviour. This new filter allows the possibility of eliminating subsequent bending structures, reducing the insertion loss, weight, and PIM., This work was supported by MINECO (Spain) (grant TEC2014-55735-C3-R, TEC2014-51902-C2-2-R, and TEC2017-85529-C3-2-R).
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Description of bow-tie nanoantennas excited by localized emitters using conformal transformation

  • Pacheco-Peña, Víctor
  • Beruete Díaz, Miguel
  • Fernández Domínguez, Antonio I.
  • Luo, Yu
  • Navarro Cía, Miguel
The unprecedented advance experienced by nano- fabrication techniques and plasmonics research over the past few years has made possible the realization of nanophotonic systems entering into the so-called strong coupling regime between localized surface plasmon (LSP) modes and quantum emitters. Unfortunately, from a theoretical point of view, the field is hindered by the lack of analytical descriptions of the electro- magnetic interaction between strongly hybridized LSP modes and nanoemitters even within the Markovian approximation. This gap is tackled here by exploiting a conformal transformation where a bow-tie nanoantenna excited by a dipole is mapped into a periodic slab−dipole framework whose analytical solution is available. Solving the problem in the transformed space not only provides a straightforward analytical explanation for the original problem (validated using full-wave simulations) but also grants a deep physical insight and simple design guidelines to maximize the coupling between localized dipoles and the bow-tie LSP modes. The results presented here therefore pave the way for a full analytical description of realistic scenarios where quantum dots or dye molecules (modeled beyond a two-level system) are placed near a metallic bow-tie nanoantenna., This work was supported in part by the Spanish Government under contract TEC2014-51902-C2-2-R. V.P.-P. is sponsored by Spanish Ministerio de Educación, Cultura y Deporte under grant FPU AP-2012-3796. M.B. is sponsored by the Spanish Government via RYC-2011-08221. A.I.F.-D. acknowledges funding from EU Seventh Framework Programme under grant agreement FP7-PEOPLE-2013-CIG63099. Y.L. would like to acknowledge the funding support from Singapore Ministry of Education (MOE) under grant no. MOE2015-T2-1-145, and NTU-A*STAR Silicon Technologies Centre of Excellence under the program grant no. 11235150003. M.N.-C. was supported by an Imperial College Junior Research Fellowship and is now supported by a Birmingham Fellowship.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Resonant quasi-periodic structure for rectangular waveguide technology with wide stopband and band-pass behavior

  • Arregui Padilla, Iván
  • Teberio Berdún, Fernando
  • Arnedo Gil, Israel
  • Percaz Ciriza, Jon Mikel
  • Gómez Torrent, Adrián
  • Chudzik, Magdalena
  • Gómez Laso, Miguel Ángel
  • Lopetegui Beregaña, José María
In this paper, a novel quasi-periodic structure for rectangular waveguide technology is proposed. The constituent unit cells of the structure feature a resonant behavior, providing high attenuation levels in the stopband with a compact (small period) size. By applying a smooth taper-like variation to the height of the periodic structure, very good matching is achieved in the passband while the bandwidth of the stopband is strongly increased. Moreover, by smoothly tapering the width of the structure, a band-pass frequency behavior is obtained. In order to demonstrate the capabilities of the novel quasi-periodic structure proposed, a band-pass structure with good matching, wide rejected band, and high-power handling capability has been designed, fabricated, and measured obtaining very good results., This work was supported by MINECO (Spain) under projects TEC2014-51902-C2-2-R and TEC2014- 55735-C3-R.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Comprehensive analysis of photonic nanojets in 3D dielectric cuboids excited by surface plasmons

  • Pacheco-Peña, Víctor
  • Minin, Igor V.
  • Minin, Oleg V.
  • Beruete Díaz, Miguel
In this paper we study the excitation of photonic nanojets (PNJ) in 3D dielectric cuboids by surface plasmons at telecommunication wavelengths. The analysis is done using the effective refractive index approach. It is shown that the refractive index contrast between the regions with and without cuboid should be roughly less than 2 in order to generate jets at the output of the cuboid. The best performance at λ0 = 1550 nm is obtained when the height of the cuboid is 160 nm producing a jet just at the output interface with a subwavelength resolution of 0.68λ0 and a high intensity enhancement (×5) at the focus. The multi‐wavelength response is also studied demonstrating that it is possible to use the proposed structure at different wavelengths. Finally, the backscattering enhancement is numerically evaluated by inserting a metal particle within the PNJ region, demonstrating a maximum value of ∼2.44 dB for a gold sphere of radius 0.1λ0., This work was supported by the Spanish Ministerio de Economía y Competitividad under contract TEC2014‐51902‐C2‐2‐R and partially was supported by the Mendeleev scientific fund of Tomsk State University № 8.2.48.2015. V.P.‐P. is sponsored by Spanish Ministerio de Educación, Cultura y Deporte under grant FPU AP‐2012‐3796. M.B. is sponsored by the Spanish Government via RYC‐2011‐08221.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Increasing surface plasmons propagation via photonic nanojets with periodically spaced 3D dielectric cuboids

  • Pacheco-Peña, Víctor
  • Minin, Igor V.
  • Minin, Oleg V.
  • Beruete Díaz, Miguel
A structure based on periodically arranged 3D dielectric cuboids connected by photonic nanojets (PNJs) is proposed with the aim of increasing the propagation distance of surface plasmon polaritons (SPPs) at the telecom wavelength of 1550 nm. The performance of the structure is evaluated and compared with the case without the cuboids demonstrating that the SPPs propagation length is enhanced by a factor greater than 2, reaching a value of approximately 190, when the gap between the cuboids is 2.50. Also, the dependence of the propagation length with the height of the cubes is evaluated, showing that this parameter is critical for a good performance of the chain. A subwavelength resolution is obtained for all the jets generated at the output of the cuboids., This work was supported by the Spanish Ministerio de Economía y Competitividad under contract TEC2014-51902-C2-2-R and partially was supported by the Mendeleev scientific fund of Tomsk State University No 8.2.48.2015. V.P.-P. is sponsored by Spanish Ministerio de Educación, Cultura y Deporte under grant FPU AP-2012-3796. M.B. is sponsored by the Spanish Government via RYC-2011-08221.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Broadband frequency and angular response of a sinusoidal bull’s eye antenna

  • Beaskoetxea Gartzia, Unai
  • Navarro Cía, Miguel
  • Beruete Díaz, Miguel
A thorough experimental study of the frequency and beaming angle response of a metallic leaky-wave bull’s eye antenna working at 77 GHz with a sinusoidally corrugated profile is presented. The beam scanning property of these antennas as frequency is varied is experimentally demonstrated and corroborated through theoretical and numerical results. From the experimental results the dispersion diagram of the n = −1 and n = −2 space harmonics is extracted, and the operation at different frequency regimes is identified and discussed. In order to show the contribution of each half of the antenna, numerical examples of the nearfield behavior are also displayed. Overall, experimental results are in good qualitative and quantitative agreement with theoretical and numerical calculations. Finally, an analysis of the beamwidth as a function of frequency is performed, showing that it can achieve values below 1.5° in a fractional bandwidth of 4% around the operation frequency, which is an interesting frequency-stable broadside radiation., This work was supported by the Spanish Government under contract TEC2014-51902-C2-2-R. MN-C is supported by University of Birmingham (Birmingham Fellowship). MB acknowledges support by the Spanish Government under contract RYC-2011-08221.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

3D-printed 96 GHz bull’s-eye antenna with off-axis beaming

  • Beaskoetxea Gartzia, Unai
  • Maci, Stefano
  • Navarro Cía, Miguel
  • Beruete Díaz, Miguel
Reducing the profile, footprint and weight of antennas embarked on aircrafts, drones or satellites has been a long pursued objective. Here we tackle this issue by developing a millimeter-wave 96 GHz elliptical Bull’s-Eye antenna with off-axis radiation at 16.5° that has been fabricated by low cost 3-D printing stereolithography, followed by metal coating. The theoretical basis for optimum off-axis operations is explained. Measurement results show an overall good agreement with simulations, displaying a gain of 17 dB and a 3.5° beamwidth (E-plane) at the operational frequency. The off-axis beaming enlarges the potential applicability of this technology with respect to the broadside beam solution., This work was supported by the Spanish Government under contract TEC2014-51902-C2-2-R. M. N.-C. is supported by University of Birmingham [Birmingham Fellowship]. M.B. acknowledges support by the Spanish Government under contract RYC-2011-08221
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Epsilon-near-zero metalenses operating in the visible

  • Pacheco-Peña, Víctor
  • Navarro Cía, Miguel
  • Beruete Díaz, Miguel
Several converging lenses working in the permittivity near to zero (ENZ) regime at optical frequencies are designed using an array of metal-dielectric-metal plasmonic waveguides. These plasmonic waveguides show a dispersive nature that enable to mimic an effective ENZ medium when using the fast wave transverse electric (TE1) mode near its cut-off wavelength. By arranging multiple plasmonic waveguides with the correct engineered dimensions, several metalenses, including graded index (GRIN) ones, and diffractive optical elements (i.e., zoned metalenses) are proposed. The metalenses are designed at l0 = 474.9nm (f = 631.67THz) with a focal length of 10.75l0. Numerical results demonstrate that the best performance is obtained for the case of the GRIN metalens in terms of the focal position, transversal resolution and thickness, reducing its volume up to ∼52.3% with respect to the smooth-profiled plano-concave metalens., This work was supported by the Spanish Ministerio de Economía y Competitividad under contract TEC2014-51902-C2-2-R. V.P.-P. is sponsored by Spanish Ministerio de Educación, Cultura y Deporte under grant FPU AP-2012-3796. M. N.-C. is supported by the Birmingham Fellowship. M.B. is sponsored by the Spanish Government via RYC-2011-08221.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Metasurface-based ultrathin carpet cloaks for millimeter waves

  • Orazbayev, Bakhtiyar
  • Mohammadi Estakhri, Nasim
  • Alù, Andrea
  • Beruete Díaz, Miguel
Esta es la version no revisada del artículo: Orazbayev, B., Estakhri, N. Mohammadi, Alù, A., Beruete, M., Experimental Demonstration of Metasurface‐Based Ultrathin Carpet Cloaks for Millimeter Waves. Advanced Optical Materials 2017, 5, 1600606. Se puede consultar la versión publicada en https://doi.org/10.1002/adom.201600606 Versión aceptada en Academica-e: https://academica-e.unavarra.es/handle/2454/22732, A metasurface carpet cloak for millimetre-wave range with polarization independent performance is experimentally demonstrated. It is shown that the cloak is able to mimic the ground plane by fully restoring the amplitude and phase distributions for both TE and TM polarizations, with a relatively wide frequency and angular widths response., This work was founded by the Spanish Ministerio de Economía y Competitividad with project TEC2014-51902-C2-2-R. M.B. acknowledges funding by the Spanish Ministerio de Economía y Competitividad with contract RYC-2011- 08221. N.M.E. and A.A. have been supported by the NSF CAREER Award No. ECCS-0953311 and the AFOSR Grant No. FA9550-13-1-0204.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Indium tin oxide refractometer in the visible and near infrared via lossy mode and surface plasmon resonances with Kretschmann configuration

  • Torres Landívar, Víctor
  • Beruete Díaz, Miguel
  • Sánchez Zábal, Pedro
  • Del Villar, Ignacio
The following article appeared in Torres, V., Beruete, M., Del Villar, I., & Sánchez, P. (2016). Indium tin oxide refractometer in the visible and near infrared via lossy mode and surface plasmon resonances with Kretschmann configuration. Applied Physics Letters, 108(4), doi:10.1063/1.4941077, and may be found at http://dx.doi.org/10.1063/1.4941077., An indium tin oxide (ITO) refractometer based on the generation of lossy mode resonances (LMRs) and surface plasmon resonances (SPRs) is presented. Both LMRs and SPRs are excited, in a single setup, under grazing angle incidence with Kretschmann configuration in an ITO thin- film deposited on a glass slide. The sensing capabilities of the device are demonstrated using several solutions of glycerin and water with refractive indices ranging from 1.33 to 1.47. LMRs are excited in the visible range, from 617 nm to 682 nm under TE polarization and from 533nm to 637nm under TM polarization, with a maximum sensitivity of 700 nm/RIU and 1200 nm/RIU, respectively. For the SPRs, a sensing range between 1375 nm and 2494 nm with a maximum sensitivity of 8300 nm/RIU is measured under TM polarization. Experimental results are supported with numerical simulations based on a modification of the plane-wave method for a one- dimensional multilayer waveguide., This work was supported in part by the Spanish Ministry of Education and Science-under Contracts FEDER TEC2013-43679-R and TEC2014-51902-C2-2-R. The FTIR spectrometer was financed by the Spanish Ministry of Economy and Competitiveness in the frame of the Project CEI10-2-2005. M. Beruete acknowledges funding by the Spanish Government under the Research Contract Program Ramón y Cajal RYC-2011-08221.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Metamaterial platforms for spintronic modulation of mid-infrared response under very weak magnetic field

  • Armelles Reig, Gaspar
  • Bergamini, Luca
  • Zabala, Nerea
  • García-Pérez, Fernando
  • Dotor-Castilla, María Luisa
  • Torné, Lorena
  • Álvaro Bruna, Raquel
  • Griol, Amadeu
  • Martínez, Alejandro
  • Aizpurua, Javier
  • Cebollada, Alfonso
In this work, we experimentally demonstrate magnetic modulation of mid-infrared (mid-IR) plasmon resonances in microantenna and hole-array metamaterial platforms made of Ni81Fe19/Au multilayers. The responsible mechanism is the magnetorefractive effect linked to the giant magnetoresistance (GMR) present in this system. Ni81Fe19/Au multilayers experience a modification in the electrical resistivity upon the application of a small magnetic field. This directly translates into a change in the optical constants of the multilayer, making it possible to magnetically modulate the plasmon resonances. Because GMR acts on conduction electrons, the optical modulation occurs in the low energy, mid-IR range, even being possible to extend it to the THz range. Electrodynamical calculations confirm the experimental observations. This approach improves by up to 2 orders of magnitude previous attempts for mid-IR magnetic modulation, is potentially ultrafast due to the characteristic spintronics dynamics, and establishes a roadmap for spintronically controlled devices in the whole mid-IR to THz band., We acknowledge financial support from MINECO through project AMES (MAT 2014-58860-P), Quantum Spin Plasmonics (FIS2015-72035-EXP), PlasmoQuanta (FIS2016-80174-P), and MIRRAS (MAT2017-84009-R). L.B., N.Z., and J.A. acknowledge support from the Basque Department of Education and the UPV-EHU (Grant IT-756-13). A.M. acknowledges support from the Spanish Ministry of Economy and Competiveness (MINECO) under grant TEC2014-51902-C2-1-R. We acknowledge the service from the MiNa Laboratory at IMN and funding from MINECO under project CSIC13-4E-1794 and from CM under project S2013/ICE-2822 (Space-Tec), both with support from EU (FEDER, FSE)., Peer reviewed