Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 3
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Do hydraulic pumps and filters of sprayers influence the viability of Beauveria bassiana based mycoinsecticide Botanigard®?

  • Beltrán-Martí, Roberto
  • Garcerá, Cruz
  • Cuquerella, Jaime J.
  • Catalá-Senent, Laura
  • Izquierdo-Sanz, Héctor
  • Garrido-Jurado, Inma
  • Chueca, Patricia
[EN] Entomopathogenic fungi are promising biocontrol agents for pest management, but they could be sensitive to application methods. Sprayers, used for both fungal and chemical products, can potentially harm the fungal propagules. This study investigated the impact of common hydraulic pumps (piston and diaphragm) on the viability of Beauveria bassiana Vuillemin (Ascomycota: Hyprocreales) based mycoinsecticide Botanigard® in the spray mixture. It also aimed to determine the optimal filter mesh size for the system to prevent clogging during application. The results showed significant reduction in conidial germination percentages with increasing number of passes through both types of pumps. However, in both cases the decrease was around 4% with a 90% of conidial germination which may be high enough to control the pest. The temperature of the mixture increased with the number of passes through the pumps, but it remained within the suitable range for fungal growth. When it came to filter clogging, the 32-mesh filter did not clog, the 50-mesh had a low clogging percentage, and the 80- mesh filters had higher clogging percentages (18% for suction filter and 56% for impulsion filter) after 30 passes through the system. As a conclusion, hydraulic pumps are suitable to apply B. bassiana based mycoinsecticide Botanigard®, but temperature control should be taken into account to prevent conidia damage. Using 32-mesh filters for both suction and impulsion is recommended to prevent clogging issues when applying this product., This work has been funded by the Ministry of Science and Innovation of Spain through the FUNGITECH Project (PID2019-106336RR-I00) and the Generalitat Valenciana - Instituto Valenciano de Investigaciones Agraria (GVA-IVIA) through the 52204C project and funds from the European Regional Development Fund (ERDF) . Roberto Beltran-Marti thanks INIA for the FPI-INIA scholarship (PRE2020-096256) , partially supported by ESF funds from the European Union. Cruz Garcera was recipient of a post-doctoral grant DOC-INIA funded by Instituto Nacional de Investigacion y Tecnologia Agraria y Agroalimentaria (ref. DR2015- 0318) . The authors thank the Tragsa Group for their collaboration and the Department of Agricultural Entomology of the University of Cordoba for their support.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Automatic detection of pomegranate fruit affected by blackheart disease using X-ray imaging

  • Munera, S|||0000-0003-3064-1186
  • Rodriguez-Ortega, Alejandro|||0000-0003-4781-6368
  • Aleixos Borrás, María Nuria|||0000-0001-6051-3375
  • Cubero, Sergio
  • Blasco, José
[EN] Blackheart is one of the primary diseases affecting pomegranate fruit globally, caused by the fungus Alternaria. The damages are not visually detectable, as it is an internal disease that requires non-invasive technologies to provide information from inside the fruit to be detected. This study explored the ability of X-ray imaging to detect this infection in `Wonderful¿ pomegranate fruit. X-ray images of healthy and infected fruit at different levels were acquired and analysed. Texture features based on first-order statistics, the grey-level co-occurrence matrix (GLCM), and grey-level histograms with several resolutions were extracted from X-ray images and used to classify the fruit as healthy or infected through the random forest algorithm. The presence of the infection in three levels of severity was later assessed by destructive visual analysis by opening the samples in half. The highest accuracy models were obtained using all texture features and histograms with 256 bins. Compared to manual inspection, X-rays showed a clear advantage in detecting incipient infections (infected fruit at level 1), correctly identifying 93.3 % of infected fruits. In contrast, the manual inspection identified only 66.7 % of fruit, highlighting the limitations of early-stage detection., This work was partially funded by the projects GVA-PROMETEO CIPROM/2021/014, MICIU-AEI (PID2023-150192OR-C31 and C32) and GVA-IVIA 52204 with the EU through the European Regional Development Fund (ERDF) from GVA 2021 2027. Sandra Munera thanks the postdoctoral contract Juan de la Cierva-Formacion ¿ (FJC2021-047786-I) co-funded by MCIN/AEI/10.13039/ 501100011033 and European Union NextGenerationEU/PRTR.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Airborne concentration and canopy distribution of microencapsulated pheromone formulation applied with drone and terrestrial sprayers in vineyards

  • Gavara, Aitor|||0000-0003-1607-9131
  • Vacas, Sandra|||0000-0001-6911-1647
  • Navarro-Llopis, Vicente|||0000-0003-3030-3304
  • Fonte, Alberto
  • Garcerá, Cruz
  • Chueca, Patricia
[EN] BACKGROUND: Mating disruption is a highly effective pest control technique without the negative impacts of most chemical plant protection products. Traditionally, this control method has been implemented using passive dispensers that release the synthetic sex pheromone of the target pest. However, new sprayable formulations are now available. Due to the recent introduction of these formulations, their application for mating disruption has yet to be fully optimized. This study evaluated the field performance of two spray technologies-unmanned aerial vehicle (UAV) and conventional terrestrial sprayer (TS)-for applying a microencapsulated formulation against the European grapevine moth, Lobesia botrana. RESULTS: Spray distribution in the orchards revealed that UAV application resulted in higher deposition at the top of the vines, whereas TS achieved greater deposition on the lateral canopy surfaces. Additionally, the UAV setup produced larger droplets, while the TS setup generated a higher number of smaller, more clustered droplets. When measuring airborne pheromone concentration on the treatment day and at 7, 14 and 21 days post-treatment, initial levels were higher with UAV application but declined more rapidly compared to TS. CONCLUSION: Both spray technologies delivered sufficient pheromone levels for effective mating disruption. Compared to dispensers, pheromone spraying achieved similar airborne concentrations while using 50% less pheromone. Although this approach shows great potential, further optimization of spray technology is needed to maximize its effectiveness. (c) 2025 Society of Chemical Industry., The authors would like to thank Cooperatives Agro-alimentaries de la Comunitat Valenciana (especially Vicente Insa), Servici de Sanitat Vegetal de la Generalitat Valenciana (Vicent Badia and Vicente Dalmau), Dpto. de Ingenieria Cartografica Geodesia y Fotogrametria de la Universitat Politecnica de Valencia (Israel Quintanilla and Jordi Vidal), Cooperativa Agricola La Inmaculada, Heredat el Ardal SAT, Jordi Llop from Universitat Politecnica de Catalunya, Jaime Mata, David Pitarch, Paco Ibanez and Jaume Martinez from IVIA, and Ivan Carrillo from OptiSpray for their support in carrying out the field trials. This research was funded by Conselleria de Agricultura, Desarrollo Rural, Emergencia Climatica y Transicion Ecologica, Generalitat Valenciana through the project 'Lucha contra plagas 2023', and Generalitat Valenciana - Instituto Valenciano de Investigaciones Agrarias through the 52204C project and funds from the European Regional Development Fund.