Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 4
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A predictive model of muscle excitations based on muscle modularity for a large repertoire of human locomotion conditions

  • Gonzalez-Vargas, J.
  • Sartori, M.
  • Dosen, S.
  • Torricelli, Diego
  • Pons Rovira, José Luis
  • Farina, Dario
© 2015 Gonzalez-Vargas, Sartori, Dosen, Torricelli, Pons and Farina. Humans can efficiently walk across a large variety of terrains and locomotion conditions with little or no mental effort. It has been hypothesized that the nervous system simplifies neuromuscular control by using muscle synergies, thus organizing multi-muscle activity into a small number of coordinative co-activation modules. In the present study we investigated how muscle modularity is structured across a large repertoire of locomotion conditions including five different speeds and five different ground elevations. For this we have used the non-negative matrix factorization technique in order to explain EMG experimental data with a low-dimensional set of four motor components. In this context each motor components is composed of a non-negative factor and the associated muscle weightings. Furthermore, we have investigated if the proposed descriptive analysis of muscle modularity could be translated into a predictive model that could: (1) Estimate how motor components modulate across locomotion speeds and ground elevations. This implies not only estimating the non-negative factors temporal characteristics, but also the associated muscle weighting variations. (2) Estimate how the resulting muscle excitations modulate across novel locomotion conditions and subjects. The results showed three major distinctive features of muscle modularity: (1) the number of motor components was preserved across all locomotion conditions, (2) the non-negative factors were consistent in shape and timing across all locomotion conditions, and (3) the muscle weightings were modulated as distinctive functions of locomotion speed and ground elevation. Results also showed that the developed predictive model was able to reproduce well the muscle modularity of un-modeled data, i.e., novel subjects and conditions. Muscle weightings were reconstructed with a cross-correlation factor greater than 70% and a root mean square error less than 0.10. Furthermore, the generated muscle excitations matched well the experimental excitation with a cross-correlation factor greater than 85% and a root mean square error less than 0.09. The ability of synthetizing the neuromuscular mechanisms underlying human locomotion across a variety of locomotion conditions will enable solutions in the field of neurorehabilitation technologies and control of bipedal artificial systems., This research has been supported by the FP7 European project H2R (grant No. 600698)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Human-like compliant locomotion: State of the art of robotic implementations

  • Torricelli, Diego
  • González, J.
  • Weckx, M.
  • Jiménez-Fabián, R.
  • Vanderborght, B.
  • Sartori, M.
  • Dosen, S.
  • Farina, Dario
  • Lefeber, D.
  • Pons Rovira, José Luis
This review paper provides a synthetic yet critical overview of the key biomechanical principles of human bipedal walking and their current implementation in robotic platforms. We describe the functional role of human joints, addressing in particular the relevance of the compliant properties of the different degrees of freedom throughout the gait cycle. We focused on three basic functional units involved in locomotion, i.e. the ankle-foot complex, the knee, and the hip-pelvis complex, and their relevance to whole-body performance. We present an extensive review of the current implementations of these mechanisms into robotic platforms, discussing their potentialities and limitations from the functional and energetic perspectives. We specifically targeted humanoid robots, but also revised evidence from the field of lower-limb prosthetics, which presents innovative solutions still unexploited in the current humanoids. Finally, we identified the main critical aspects of the process of translating human principles into actual machines, providing a number of relevant challenges that should be addressed in future research., This review paper results from the research activities carried out in the FP7 project H2R 'Integrative Approach for the Emergence of Human-Like Robotic Locomotion', grant agreement n° 600698 (www.h2rproject.eu), and supported by the Biomot project, grant agreement n° 611695., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A Variable Stiffness Actuator Module with Favorable Mass Distribution for a Bio-inspired Biped Robot

  • Rodríguez-Cianca, David
  • Weckx, M.
  • Jiménez-Fabián, R.
  • Torricelli, Diego
  • Gonzalez-Vargas, J.
  • Sanchez-Villamañan, Maria del Carmen
  • Sartori, M.
  • Berns, K
  • Vanderborght, B.
  • Pons Rovira, José Luis
  • Lefeber, D.
Achieving human-like locomotion with humanoid platforms often requires the use of variable stiffness actuators (VSAs) in multi-degree-of-freedom robotic joints. VSAs possess 2 motors for the control of both stiffness and equilibrium position. Hence, they add mass and mechanical complexity to the design of humanoids. Mass distribution of the legs is an important design parameter, because it can have detrimental effects on the cost of transport. This work presents a novel VSA module, designed to be implemented in a bio-inspired humanoid robot, Binocchio, that houses all components on the same side of the actuated joint. This feature allowed to place the actuator’s mass to more proximal locations with respect to the actuated joint instead of concentrating it at the joint level, creating a more favorable mass distribution in the humanoid. Besides, it also facilitated it’s usage in joints with centralized multi-degree of freedom (DoF) joints instead of cascading single DoF modules. The design of the VSA module is presented, including it’s integration in the multi-DoFs joints of Binocchio. Experiments validated the static characteristics of the VSA module to accurately estimate the output torque and stiffness. The dynamic responses of the driving and stiffening mechanisms are shown. Finally, experiments show the ability of the actuation system to replicate the envisioned human-like kinematic, torque and stiffness profiles for Binocchio.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Editorial: Assessing bipedal locomotion: Towards replicable benchmarks for robotic and robot-assisted locomotion

  • Torricelli, Diego
  • Veneman, Jan F.
  • Gonzalez-Vargas, J.
  • Mombaur, Katja
  • Remy, C.David
We thank all authors contributing with their work to this Research Topic. We also acknowledge all the European Projects that have supported past and current research in this topic: the FP7 Projects H2R (grant 600698), BALANCE (grant 601003), KoroiBot (grant 611909), WALK- MAN (grant 611832), BioMot (grant 611695), and the currently ongoing H2020 Project EUROBENCH (grant 779963), and COST Action CA16116.