Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 6
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Surface treatment of polyimide substrates for the transfer and multitransfer of graphene films

  • Campos, Nuria
  • Pérez Mas, Ana Matilde
  • Álvarez Rodríguez, Patricia
  • Menéndez López, Rosa María
  • Gómez, David
This work explores the use of polyimide substrates for the development of flexible graphene-based devices. Single layer graphene was synthesized by chemical vapour deposition and transferred to untreated and treated polyimide substrates. Of the four different surface treatments, the tetrafluoromethane/oxygen plasma and, especially, hydrochloric acid bath treatments showed the best performance, as they reduced the resistivity of the graphene samples by as much as 46%. At the same time, resistivity was also reduced by as much as 96% due to the increase in the graphene coverage area as a result of repeating the transfer process up to four times. The combination of HCl treatment and transfer iteration led to the samples acquiring a sheet resistance of 800 Ω/sq. To the best of our knowledge, this is the lowest value ever reported in the literature for graphene samples on conventional flexible polymeric substrates and, in particular, in polyimide, the most widely used material for flexible applications. This result represents a major contribution to the development of graphene-based flexible devices., The research leading to these results has received funding from the European Union Seventh Framework Programme (FP7/2007-2013) under grant agreement no. 600849 (INSIDDE Project). Support from Spanish MICINN (TECNIGRAF (IPT-2011-0951-390000) and Ramon y Cajal Program of P. Alvarez) and FICYT (fellowship of A. Perez-Mas) is also acknowledged., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Graphene patterning by nanosecond laser ablation: the effect of the substrate interaction with graphene

  • Pérez Mas, Ana Matilde
  • Álvarez Rodríguez, Patricia
  • Campos, Nuria
  • Gómez, David
  • Menéndez López, Rosa María
This paper focuses on the development of patterned graphene/substrate by means of green nanosecond pulse laser irradiation. Monolayer graphene samples supported on a Si/SiO2 substrate were patterned using 532 nm laser irradiation under fluence conditions ranging from 31 mJ/cm2 and to 4240 mJ/cm2. Raman spectroscopy was used to investigate the effect of laser irradiation on the graphene. It was found that at 356 mJ/cm2 selective ablation of the graphene occurs. However, at fluence values above 1030 mJ/cm2 (when damage to the substrate is observed) no ablation of the graphene takes place. In contrast, its graphenic structure was found to have been modified. Only at fluence values where the ablation of the substrate occurs, is graphene eliminated in an area almost equivalent to that of the ablated substrate. In this case, additional damage to the graphene sheet edges is produced. The increment in the number of oxygenated functional groups in these regions, as measured by XPS spectroscopy, suggests that this damage is probably caused by thermal phenomena during the ablation of the substrate., The research leading to these results has received funding from the European Union’s Research Fund for Coal and Steel research program under Grant Agreement number RFCR-CT-2013-00006 and the European Union Seventh Framework Programme (FP7/ 2007-2013) under grant agreement nº 600849 (INSIDDE Project). Assistance from the Spanish MINECO (project ref: MAT2013-48107-C3-1-R) and the Principado de Asturias-PCTI (Ramon y Cajal research contract [GRUPINN 14-118] of Dr. P. Álvarez and Severo Ochoa pre-doctoral grant of AM. P. Mas) is also acknowledged., Peer reviewed
RUO. Repositorio Institucional de la Universidad de Oviedo
Publicación Artículo científico (JournalArticle)

A thin c-band polarization and incidence angle-insensitive metamaterial perfect absorber

  • Fernández Álvarez, Humberto|||0000-0003-3726-0941
  • Cos Gómez, María Elena de|||0000-0002-2881-970X
  • Las Heras Andrés, Fernando Luis|||0000-0001-7959-2114
A novel metamaterial absorber design able to operate in the C frequency band is presented, along with an analysis and a method to improve both its bandwidth and its angular stability. Simulation results for a FR4-based design are shown for comparison with existing designs. In addition, a simplified equivalent circuit is provided for a better understanding of the great angular stability and wide bandwidth exhibited by the proposed structure. Moreover, simulations, manufacturing and measurements of a thinner and more flexible metamaterial absorber, keeping the angular stability of the former one, while providing a wide bandwidth, are presented, This work has been supported by the Gobierno del Principado de Asturias/FEDER under ProjectGRUPIN14-114 and by the European Union 7th Framework Programme under Project ICT-2011-9600849 (INSIDDE)
RUO. Repositorio Institucional de la Universidad de Oviedo
Publicación Artículo científico (JournalArticle)

A six-fold symmetric metamaterial absorber

  • Fernández Álvarez, Humberto|||0000-0003-3726-0941
  • Cos Gómez, María Elena de|||0000-0002-2881-970X
  • Las Heras Andrés, Fernando Luis|||0000-0001-7959-2114
A novel microwave metamaterial absorber design is introduced along with its manufacturing and characterization. Significant results considering both bandwidth and angular stability are achieved. Parametric analysis and simplified equivalent circuit are provided to give an insight on the key elements influencing the absorber performance. In addition, the constitutive parameters of the effective medium model are obtained and related to the absorber resonant behavior. Moreover, a new thinner and more flexible absorber version, preserving broad bandwidth and angular insensitive performance, is simulated, and an 8 × 8 unit-cells prototype is manufactured and measured for a limited angular margin in an anechoic chamber, This work has been supported by the Gobierno del Principado de Asturias/FEDER under project GRUPIN14-114 and by the European Union 7th F. P. under project ICT-2011-9 600849 (INSIDDE)
RUO. Repositorio Institucional de la Universidad de Oviedo
Publicación Artículo científico (JournalArticle)

330-500 GHz Graphene-Based Single-Stage High-Order Subharmonic Mixer

  • Hadarig, Andreea Ioana|||0000-0001-9778-083X
  • Ver Hoeye, Samuel Ezechiel|||0000-0002-4592-7921
  • Fernández García, Miguel|||0000-0002-5605-1718
  • Vázquez Antuña, Carlos|||0000-0003-1023-9464
  • Alonso González, Leticia|||0000-0002-5078-8196
  • Las Heras Andrés, Fernando Luis|||0000-0001-7959-2114
This work was supported in part by the European Union Seventh Framework Programme (FP/2007-2013) under Project 600849, in part by the Spanish Agencia Estatal de Investigación (AEI) and Fondo Europeo de Desarrollo Regional (FEDER) under Project TEC2016-80815-P (AEI/FEDER, UE) and Project TEC2015-72110-EXP (AEI), and in part by the Gobierno del Principado de Asturias (PCTI) and FEDER under Project IDI/2016/000372, Project IDI/2017/000083, and Project IDI/2018/000191.
RUO. Repositorio Institucional de la Universidad de Oviedo
Publicación Artículo científico (JournalArticle)

Submillimeter Wave High Order Frequency Multiplier Based on Graphene

  • Ver Hoeye, Samuel Ezechiel|||0000-0002-4592-7921
  • Hadarig, Andreea Ioana|||0000-0001-9778-083X
  • Vázquez Antuña, Carlos|||0000-0003-1023-9464
  • Fernández García, Miguel|||0000-0002-5605-1718
  • Alonso González, Leticia|||0000-0002-5078-8196
  • Las Heras Andrés, Fernando Luis|||0000-0001-7959-2114
This work was supported in part by the European Union Seventh Framework Programme (FP/2007-2013) under Grant 600849, in part by the Spanish Agencia Estatal de Investigación (AEI), in part by the Fondo Europeo de Desarrollo Regional (FEDER), under Grant TEC2016-80815-P (AEI/FEDER,UE), Grant TEC2015-72110-EXP (AEI), Grant AP2012-2020, and Grant FPU14/00016, and in part by the Gobierno del Principado de Asturias (PCTI/FEDER-FSE), under Grant IDI/2016/000372, Grant IDI/2017/000083, and Grant BP13034.