Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 79
Encontrada(s) 1 página(s)

Dipòsit Digital de la UB
Publicación Artículo científico (JournalArticle)

Tracer test modeling for characterizing heterogeneity and local-sacle residence time distribution in an artificial recharge site.

  • Valhondo, Cristina
  • Martínez-Landa, Lurdes
  • Carrera, Jesús
  • Hidalgo, Juan J.
  • Tubau, Isabel
  • De Pourcq, Katrien
  • Grau Martínez, Alba
  • Ayora, Carles
Artificial recharge of aquifers is a technique for improving water quality and increasing groundwater resources. Understanding the fate of a potential contaminant requires knowledge of the residence time distribution (RTD) of the recharged water in the aquifer beneath. A simple way to obtain the RTDs is to perform a tracer test. We performed a pulse injection tracer test in an artificial recharge system through an infiltration basin to obtain the breakthrough curves, which directly yield the RTDs. The RTDs turned out to be very broad and we used a numerical model to interpret them, to characterize heterogeneity, and to extend the model to other flow conditions. The model comprised nine layers at the site scaled to emulate the layering of aquifer deposits. Two types of hypotheses were considered: homogeneous (all flow and transport parameters identical for every layer) and heterogeneous (diverse parameters for each layer). The parameters were calibrated against the head and concentration data in both model types, which were validated quite satisfactorily against 1,1,2-Trichloroethane and electrical conductivity data collected over a long period of time with highly varying flow conditions. We found that the broad RTDs can be attributed to the complex flow structure generated under the basin due to three-dimensionality and time fluctuations (the homogeneous model produced broad RTDs) and the heterogeneity of the media (the heterogeneous model yielded much better fits).We conclude that heterogeneity must be acknowledged to properly assess mixing and broad RTDs, which are required to explain the water quality improvement of artificial recharge basins.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Pictures of blockscale transport: Effective versus ensemble dispersion and its uncertainty

  • Barros, Felipe P. J. de
  • Dentz, Marco
Solute transport models tend to use coarse numerical grid blocks to alleviate computational costs. Aside from computational issues, the subsurface environment is usually characterized over a coarse measurement network where only large scale fluctuations of the flow field are captured. Neglecting the subscale velocity fluctuations in transport simulators can lead to erroneous predictions with consequences in risk analysis and remediation. For such reasons, upscaled dispersion coefficients in spatially heterogeneous flow fields must (1) account for the subscale variability that is filtered out by homogenization and (2) be modeled as a random function to incorporate the uncertainty associated with non-ergodic solute bodies. In this work, we examine the low order statistical properties of the blockscale dispersion tensor. The blockscale is defined as the scale upon which the spatially variable flow field is homogenized (e.g. the numerical grid block). Using a Lagrangian framework, we discuss different conceptualizations of the blockscale dispersion tensor. We distinguish effective and ensemble blockscale dispersion, which measure the impact of subscale velocity fluctuations on solute dispersion. Ensemble dispersion quantifies subscale velocity fluctuations between realizations, which overestimates the actual velocity variability. Effective dispersion on the other hand quantifies the actual blockscale velocity variability and thus reflects the impact of subscale velocity fluctuations on mixing and spreading. Based on these concepts, we quantify the impact of subscale velocity fluctuations on solute particle spreading and determine the governing equations for the coarse-grained concentration distributions. We develop analytical and semi-analytical expressions for the average and variance of the blockscale dispersion tensor in 3D flow fields as a function of the structural parameters characterizing the subsurface. Our results illustrate the relevance of the blockscale, the initial scale of the solute body and local-scale dispersion in controlling the uncertainty of the plume’s dispersive behavior. The analysis performed in this work has implications in numerical modeling (i.e. grid design) and allows to quantify the uncertainty of the blockscale dispersion tensor., The first author acknowledges Yoram Rubin for fruitful discussions on the topic of block-effective macrodispersion at the early stages of this work. The second author acknowledges the support of the European Research Council (ERC) through the project MHetScale (contract number 617511). We thank all three reviewers for their constructive comments., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Continuous Time Random Walks for the Evolution of Lagrangian Velocities

  • Dentz, Marco
  • Kang, Peter K.
  • Comolli, Alessandro
  • Le Borgne, T.
  • Lester, Daniel R.
We develop a continuous time random walk (CTRW) approach for the evolution of Lagrangian velocities in steady heterogeneous flows based on a stochastic relaxation process for the streamwise particle velocities. This approach describes persistence of velocities over a characteristic spatial scale, unlike classical random walk methods, which model persistence over a characteristic time scale. We first establish the relation between Eulerian and Lagrangian velocities for both equidistant and isochrone sampling along streamlines, under transient and stationary conditions. Based on this, we develop a space continuous CTRW approach for the spatial and temporal dynamics of Lagrangian velocities. While classical CTRW formulations have non-stationary Lagrangian velocity statistics, the proposed approach quantifies the evolution of the Lagrangian velocity statistics under both stationary and non-stationary conditions. We provide explicit expressions for the Lagrangian velocity statistics, and determine the behaviors of the mean particle velocity, velocity covariance and particle dispersion. We find strong Lagrangian correlation and anomalous dispersion for velocity distributions which are tailed toward low velocities as well as marked differences depending on the initial conditions. The developed CTRW approach predicts the Lagrangian particle dynamics from an arbitrary initial condition based on the Eulerian velocity distribution and a characteristic correlation scale., MD and AC acknowledge the support of the European Research Council (ERC) through the project MHetScale (617511), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Noise-Driven Interfaces and Their Macroscopic Representation

  • Dentz, Marco
  • Neuweiler, Insa
  • Méheust, Yva
  • Tartakovsky, Daniel M.
We study the macroscopic representation of noise-driven interfaces in stochastic interface growth models in (1+1) dimensions. The interface is characterized macroscopically by saturation, which represents the fluctuating sharp interface by a smoothly varying phase field with values between 0 and 1. We determine the one-point interface height statistics for the Edwards-Wilkinson (EW) and Kadar-Paris-Zhang (KPZ) models in order to determine explicit deterministic equations for the phase saturation for each of them. While we obtain exact results for the EW model, we develop a Gaussian closure approximation for the KPZ model. We identify an interface compression term, which is related to mass transfer perpendicular to the growth direction, and a diffusion term that tends to increase the interface width. The interface compression rate depends on the mesoscopic mass transfer process along the interface and in this sense provides a relation between meso- and macroscopic interface dynamics. These results shed light on the relation between mesoscale and macroscale interface models, and provide a systematic framework for the upscaling of stochastic interface dynamics., MD acknowledges the funding from the European Research Council through the project MHetScale (Grant agreement no. 617511). IN acknowledges funding from DFG (Ne824/6-2 under the research unit MUSIS FOR 1083). DMT was supported in part by Defense Advanced Research Projects Agency under the EQUiPS program, the Air Force Office of Scientific Research under grant FA9550-12-1-0185 and by the National Science Foundation under grant DMS-1522799., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Mechanisms of Anomalous Dispersion in Flow Through Heterogeneous Porous Media

  • Tyukhova, Alina
  • Dentz, Marco
  • Kinzelbach, Wolfgang
  • Willmann, Mattias
We study the origins of anomalous dispersion in heterogeneous porous media in terms of the medium and flow properties. To identify and quantify the heterogeneity controls, we focus on porous media which are organized in assemblies of equally sized conductive inclusions embedded in a constant conductivity matrix. We study the behavior of particle arrival times for different conductivity distributions and link the statistical medium characteristics to large scale transport using a continuous time random walk (CTRW) approach. The CTRW models particle motion as a sequence of transitions in space and time. We derive an explicit map of the conductivity onto the transition time distribution. The derived CTRW model predicts solute transport based on the conductivity distribution and the characteristic heterogeneity length. In this way, heavy tails in solute arrival times and anomalous particle dispersion as measured by the centered mean square displacement are directly related to the medium properties. These findings shed light on the mechanisms of anomalous dispersion in heterogeneous porous media, and provide a basis for the predictive modeling of large scale transport., The authors gratefully acknowledge financial support by the Swiss National Science Foundation (SNF) through 10 grant 200021 132304 and by Nagra, Wettingen. MD acknowledges the support of the European Research Council (ERC) through the project MHetScale (617511)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Transient forcing effects on mixing of two fluids for a stable stratification

  • Pool, María
  • Dentz, Marco
  • Post, Vincent E A
Mixing and dispersion in coastal aquifers are strongly influenced by periodic temporal flow fluctuations on multiple time scales ranging from days (tides), seasons (pumping and recharge) to glacial cycles (regression and transgressions). Transient forcing effects lead to a complex space and time-dependent flow response which induces enhanced spreading and mixing of dissolved substances. We study effective mixing and solute transport in temporally fluctuating one-dimensional flow for a stable stratification of two fluids of different density using detailed numerical simulation as well as accurate column experiments. We quantify the observed transport behaviors and interface evolution by a time-averaged model that is obtained from a two-scale expansion of the full transport problem, and derive explicit expressions for the center of mass and width of the mixing zone between the two fluids. We find that the magnitude of transient-driven mixing is mainly controlled by the hydraulic diffusivity, the period, and the initial interface location. At an initial time regime, mixing can be characterized by an effective dispersion coefficient and both the interface position and width evolve linearly in time. At larger times, the spatial variability of the flow velocity leads to a deceleration of the interface and a compression of its width, which is manifested by a subdiffusive evolution of its width as t1/2. © 2016. American Geophysical Union. All Rights Reserved., The data used in this paper can be obtained upon request from the corresponding author. The support of the European Research Council (ERC) through the project MHetScale (617511) is gratefully acknowledged. We also wish to thank the assistance provided by Flinders University mechanical workshop staff, in particular Mr. Andrew Dunn and Mr. Christopher Price., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Chaotic mixing in three-dimensional porous media

  • Lester, Daniel R.
  • Dentz, Marco
  • Le Borgne, Tanguy
Under steady flow conditions, the topological complexity inherent to all random three-dimensional (3D) porous media imparts complicated flow and transport dynamics. It has been established that this complexity generates persistent chaotic advection via a 3D fluid mechanical analogue of the baker's map which rapidly accelerates scalar mixing in the presence of molecular diffusion. Hence, pore-scale fluid mixing is governed by the interplay between chaotic advection, molecular diffusion and the broad (power-law) distribution of fluid particle travel times which arise from the non-slip condition at pore walls. To understand and quantify mixing in 3D porous media, we consider these processes in a model 3D open porous network and develop a novel stretching continuous time random walk (CTRW), which provides analytic estimates of pore-scale mixing which compare well with direct numerical simulations. We find that the chaotic advection inherent to 3D porous media imparts scalar mixing which scales exponentially with the longitudinal advection, whereas the topological constraints associated with two-dimensional porous media limit the mixing to scale algebraically. These results decipher the role of wide transit time distributions and complex topologies on porous media mixing dynamics, and provide the building blocks for macroscopic models of dilution and mixing which resolve these mechanisms. © 2016 Cambridge University Press., M.D. acknowledges the support of the European Research Council (ERC) through the project MHetScale (contract no. 617511). T.L.B. acknowledges the support of the ERC project ReactiveFronts and Agence Nationale de la Recherche project Subsurface Mixing and Reaction., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Heat as a tracer for understanding transport processes in fractured media: Theory and field assessment from multiscale thermal push-pull tracer tests

  • Klepikova, Maria V.
  • Le Borgne, Tanguy
  • Bour, Olivier
  • Dentz, Marco
  • Hochreutener, Rebecca
  • Lavenant, Nicolas
The characterization and modeling of heat transfer in fractured media is particularly challenging as the existence of fractures at multiple scales induces highly localized flow patterns. From a theoretical and numerical analysis of heat transfer in simple conceptual models of fractured media, we show that flow channeling has a significant effect on the scaling of heat recovery in both space and time. The late time tailing of heat recovery under channeled flow is shown to diverge from the (Formula presented.) behavior expected for the classical parallel plate model and follow the scaling (Formula presented.) for a simple channel modeled as a tube. This scaling, which differs significantly from known scalings in mobile-immobile systems, is of purely geometrical origin: late time heat transfer from the matrix to a channel corresponds dimensionally to a radial diffusion process, while heat transfer from the matrix to a plate may be considered as a one-dimensional process. This phenomenon is also manifested on the spatial scaling of heat recovery as flow channeling affects the decay of the thermal breakthrough peak amplitude and the increase of the peak time with scale. These findings are supported by the results of a field experimental campaign performed on the fractured rock site of Ploemeur. The scaling of heat recovery in time and space, measured from thermal breakthrough curves measured through a series of push-pull tests at different scales, shows a clear signature of flow channeling. The whole data set can thus be successfully represented by a multichannel model parametrized by the mean channel density and aperture. These findings, which bring new insights on the effect of flow channeling on heat transfer in fractured rocks, show how heat recovery in geothermal tests may be controlled by fracture geometry. In addition, this highlights the interest of thermal push-pull tests as a complement to solute tracers tests to infer fracture aperture and geometry. © 2016. American Geophysical Union. All Rights Reserved., The fieldwork data in this study is available from the authors upon request (maria.klepikova@erdw.ethz.ch). This work was supported by the European Marie Curie network IMVUL (grant agreement 212298), by the National Research Observatory H+ and by the European Interreg IV project CLIMAWAT and the ANR project Stock en socles. We also thank Alain Dassargues and Serge Brouyeres from the University of Liege, Belgium for their kind assistance in providing a water heater. MD acknowledges the support of the European Research Council (ERC) through the project MHetScale (617511)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Non-Fickian Transport Under Heterogeneous Advection and Mobile-Immobile Mass Transfer

  • Comolli, Alessandro
  • Hidalgo, Juan J.
  • Moussey, Charlie
  • Dentz, Marco
We study the combined impact of heterogeneous advection and mobile–immobile mass transfer on non-Fickian transport using the continuous-time random walk (CTRW) approach. The CTRW models solute transport in heterogeneous media as a random walk in space and time. Our study is based on a d-dimensional CTRW model that accounts for both heterogeneous advection and mass transfer between mobile and immobile zones, to which we also refer as solute trapping. The flow heterogeneity is mapped into the distribution of advective transition times over a characteristic heterogeneity scale. Mass transfer into immobile zones is quantified by a trapping rate and the distribution of particle return times. The total particle transition time over a characteristic heterogeneity scale then is given by the advective time and the sum of trapping times over the number of trapping events. We establish explicit integro-partial differential equations for the evolution of the concentration and discuss the relation to the multirate mass transfer approach, specifically the relation between the trapping time distribution and the memory function. We then analyze the signatures of anomalous transport due to advective heterogeneity and trapping in terms of spatial moments and first passage times or breakthrough curves. The behaviors for different disorder scenarios are analyzed analytically and through random walk particle tracking simulations. Assuming that advective mass transfer is faster than diffusive, we identify three regimes of distinct transport behaviors, which are separated by the characteristic trapping rate and trapping times. (1) At early times, we identify a pre-asymptotic time regime that is fully determined by advective heterogeneity and which is characterized by superlinear growth of longitudinal dispersion. (2) For longitudinal dispersion, we identify an intermediate regime of strong superlinear diffusion. This regime is determined by the combined effect of advective heterogeneity and trapping. (3) At larger time, the asymptotic trapping-driven regime shows the signatures of diffusion in immobile zones, which leads to both sub- and superlinear dispersion. These results shed some new light on the mechanism of non-Fickian transport and their manifestation in spatial and temporal solute distributions. © 2016 Springer Science+Business Media Dordrecht, The support of the European Research Council (ERC) through the project MHetScale (617511) is gratefully acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Scale dependence of the hydraulic properties of a fractured aquifer estimated using transfer functions

  • Pedretti, Daniele
  • Russian, Anna
  • Sánchez-Vila, Xavier
  • Dentz, Marco
We present an investigation of the scale dependence of hydraulic parameters in fractured media based on the concept of transfer functions (TF). TF methods provide an inexpensive way to perform aquifer parameter estimation, as they relate the fluctuations of an observation time series (hydraulic head fluctuations) to an input function (aquifer recharge) in frequency domain. Fractured media are specially sensitive to this approach as hydraulic parameters are strongly scale-dependent, involving nonstationary statistical distributions. Our study is based on an extensive data set, involving up to 130 measurement points with periodic head measurements that in some cases extend for more than 30 years. For each point, we use a single-porosity and dual-continuum TF formulation to obtain a distribution of transmissivities and storativities in both mobile and immobile domains. Single-porosity TF estimates are compared with data obtained from the interpretation of over 60 hydraulic tests (slug and pumping tests). Results show that the TF is able to estimate the scale dependence of the hydraulic parameters, and it is consistent with the behavior of estimates from traditional hydraulic tests. In addition, the TF approach seems to provide an estimation of the system variance and the extension of the ergodic behavior of the aquifer (estimated in approximately 500 m in the analyzed aquifer). The scale dependence of transmissivity seems to be independent from the adopted formulation (single or dual-continuum), while storativity is more sensitive to the presence of multiple continua. © 2016. American Geophysical Union. All Rights Reserved., XS acknowledges support from theICREA Academia Project. MDacknowledges the support of theEuropean Research Council (ERC)through the project MHetScale(617511). The authors endorse AGUdata policy. All the data and additionalinformation used and cited in thispaper can be provided by thecorresponding author (DP) at specificrequests. The authors acknowledgethe useful suggestions provided bythree anonymous reviewers, whohelped to improve the quality of ourmanuscript., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Random Walk Methods for Modeling Hydrodynamic Transport in Porous and Fractured Media from Pore to Reservoir Scale

  • Nœtinger, Benoît
  • Roubinet, Delphine
  • Russian, Anna
  • Le Borgne, Tanguy
  • Delay, Frédérick
  • Dentz, Marco
  • De Dreuzy, Jean Raynald
  • Gouze, Philippe
Random walk (RW) methods are recurring Monte Carlo methods used to model convective and diffusive transport in complex heterogeneous media. Many applications can be found, including fluid mechanic, hydrology and chemical reactors modeling. These methods are easy to implement, very versatile and flexible enough to become appealing for many applications because they generally overlook or deeply simplify the building of explicit complex meshes required by deterministic methods. RW provides a good physical understanding of the interactions between the space scales of heterogeneities and the transport phenomena under consideration. In addition, they can result in efficient upscaling methods, especially in the context of flow and transport in fractured media. In the present study, we review the applications of RW to several situations that cope with diverse spatial scales and different insights into upscaling problems. The advantages and downsides of RW are also discussed, thus providing a few avenues for further works and applications. © 2016 Springer Science+Business Media Dordrecht, XS acknowledges support European Research Council (ERC) through the project MHetScale(617511)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Time domain random walks for hydrodynamic transport in heterogeneous media

  • Russian, Anna
  • Dentz, Marco
  • Gouze, Philippe
We derive a general formulation of the time domain random walk (TDRW) approach to model the hydrodynamic transport of inert solutes in complex geometries and heterogeneous media. We demonstrate its formal equivalence with the discretized advection-dispersion equation and show that the TDRW is equivalent to a continuous time random walk (CTRW) characterized by space-dependent transition times and transition probabilities. The transition times are exponentially distributed. We discuss the implementation of different concentration boundary conditions and initial conditions as well as the occurrence of numerical dispersion. Furthermore, we propose an extension of the TDRW scheme to account for mobile-immobile multirate mass transfer. Finally, the proposed TDRW scheme is validated by comparison to analytical solutions for spatially homogeneous and heterogeneous transport scenarios. © 2016. American Geophysical Union. All Rights Reserved., European Research Council, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Percolation thresholds for discrete-continuous models with nonuniform probabilities of bond formation

  • Szczygieł, Bartłomiej
  • Dudyński, Marek
  • Kwiatkowski, Kamil
  • Lewenstein, Maciej
  • Lapeyre, Gerald John
  • Wehr, Jan
We introduce a class of discrete-continuous percolation models and an efficient Monte Carlo algorithm for computing their properties. The class is general enough to include well-known discrete and continuous models as special cases. We focus on a particular example of such a model, a nanotube model of disintegration of activated carbon. We calculate its exact critical threshold in two dimensions and obtain a Monte Carlo estimate in three dimensions. Furthermore, we use this example to analyze and characterize the efficiency of our algorithm, by computing critical exponents and properties, finding that it compares favorably to well-known algorithms for simpler systems. © 2016 American Physical Society., This work has been partially supported by the Iuventus Plus programme founded by the Polish Ministry of Science and Higher Education (IP2014 024373). M.L. acknowledges Spanish MINECO Project FOQUS (FIS2013-46768), ERC AdG OSYRIS, EU IP SIQS, EU STREPEQuaM, and EU FETPROACT QUIC. J.W. has been partially funded by NSF grant DMS 131271., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Multi-rate mass transfer modeling of two-phase flow in highly heterogeneous fractured and porous media

  • Tecklenburg, Jan
  • Neuweiler, Insa
  • Carrera, Jesús
  • Dentz, Marco
We study modeling of two-phase flow in highly heterogeneous fractured and porous media. The flow behaviour is strongly influenced by mass transfer between a highly permeable (mobile) fracture domain and less permeable (immobile) matrix blocks. We quantify the effective two-phase flow behavior using a multirate rate mass transfer (MRMT) approach. We discuss the range of applicability of the MRMT approach in terms of the pertinent viscous and capillary diffusion time scales. We scrutinize the linearization of capillary diffusion in the immobile regions, which allows for the formulation of MRMT in the form of a non-local single equation model. The global memory function, which encodes mass transfer between the mobile and the immobile regions, is at the center of this method. We propose two methods to estimate the global memory function for a fracture network with given fracture and matrix geometry. Both employ a scaling approach based on the known local memory function for a given immobile region. With the first method, the local memory function is calculated numerically, while the second one employs a parametric memory function in form of truncated power-law. The developed concepts are applied and tested for fracture networks of different complexity. We find that both physically based parameter estimation methods for the global memory function provide predictive MRMT approaches for the description of multiphase flow in highly heterogeneous porous media. © 2016 Elsevier Ltd., This work was supported by the compute cluster, which is funded by the Leibniz University Hanover, the Lower Saxony Ministry of Science and Culture (MWK) and by the German Research Association (DFG) under the grant NE 34 824 10-1. We gratefully acknowledge the help of Bernd Flemisch from the Uni- versity of Stuttgart with the Dumux model. M.D. acknowledges the funding from the European Research Council through the project MHetScale (Grant agreement no. 617511)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Self-averaging and ergodicity of subdiffusion in quenched random media

  • Dentz, Marco
  • Russian, Anna
  • Gouze, Philippe
We study the self-averaging properties and ergodicity of the mean square displacement m(t) of particles diffusing in d dimensional quenched random environments which give rise to subdiffusive average motion. These properties are investigated in terms of the sample to sample fluctuations as measured by the variance of m(t). We find that m(t) is not self-averaging for d<2 due to the inefficient disorder sampling by random motion in a single realization. For d≥2 in contrast, the efficient sampling of heterogeneity by the space random walk renders m(t) self-averaging and thus ergodic. This is remarkable because the average particle motion in d>2 obeys a CTRW, which by itself displays weak ergodicity breaking. This paradox is resolved by the observation that the CTRW as an average model does not reflect the disorder sampling by random motion in a single medium realization. © 2016 American Physical Society., M.D. acknowledges the funding from the European Research Council through the project MHetScale (Grant agreement no. 617511)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Dual control of flow field heterogeneity and immobile porosity on non-Fickian transport in Berea sandstone

  • Gjetvaj, Filip
  • Russian, Anna
  • Gouze, Philippe
  • Dentz, Marco
Both flow field heterogeneity and mass transfer between mobile and immobile domains have been studied separately for explaining observed anomalous transport. Here we investigate non-Fickian transport using high-resolution 3-D X-ray microtomographic images of Berea sandstone containing microporous cement with pore size below the setup resolution. Transport is computed for a set of representative elementary volumes and results from advection and diffusion in the resolved macroporosity (mobile domain) and diffusion in the microporous phase (immobile domain) where the effective diffusion coefficient is calculated from the measured local porosity using a phenomenological model that includes a porosity threshold (φθ) below which diffusion is null and the exponent n that characterizes tortuosity-porosity power-law relationship. We show that both flow field heterogeneity and microporosity trigger anomalous transport. Breakthrough curve (BTC) tailing is positively correlated to microporosity volume and mobile-immobile interface area. The sensitivity analysis showed that the BTC tailing increases with the value of φθ, due to the increase of the diffusion path tortuosity until the volume of the microporosity becomes negligible. Furthermore, increasing the value of n leads to an increase in the standard deviation of the distribution of effective diffusion coefficients, which in turn results in an increase of the BTC tailing. Finally, we propose a continuous time random walk upscaled model where the transition time is the sum of independently distributed random variables characterized by specific distributions. It allows modeling a 1-D equivalent macroscopic transport honoring both the control of the flow field heterogeneity and the multirate mass transfer between mobile and immobile domains. © 2015. American Geophysical Union. All Rights Reserved., The authors wish to thank PaulTafforeau for his help in the X-raymicrotomography data acquisition atthe European Synchrotron Radiationfacility (ESRF, France). All data used inthis work are available upon from thecorresponding author, while detailsand codes for OpenFOAM are availableat http://openfoam.org/. MDacknowledges the support of theEuropean Research Council (ERC)through the project MHetScale(617511)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Scaling forms of particle densities for Lévy walks and strong anomalous diffusion

  • Dentz, Marco
  • Le Borgne, Tanguy
  • Lester, Daniel R.
  • Barros, Felipe P. J. de
We study the scaling behavior of particle densities for Lévy walks whose transition length r is coupled with the transition time t as |r|∞tα with an exponent α>0. The transition-time distribution behaves as ψ(t)∞t-1-β with β>0. For 1<β<2α and α≥1, particle displacements are characterized by a finite transition time and confinement to |r|<tα while the marginal distribution of transition lengths is heavy tailed. These characteristics give rise to the existence of two scaling forms for the particle density, one that is valid at particle displacements |r|蠐tα and one at |r|≲tα. As a consequence, the Lévy walk displays strong anomalous diffusion in the sense that the average absolute moments (|r|q) scale as tqν(q) with ν(q) piecewise linear above and below a critical value qc. We derive explicit expressions for the scaling forms of the particle densities and determine the scaling of the average absolute moments. We find that (|r|q)∞tqα/β for q<qc=β/α and (|r|q)∞t1+αq-β for q>qc. These results give insight into the possible origins of strong anomalous diffusion and anomalous behaviors in disordered systems in general. © 2015 American Physical Society., MD acknowledges the support of the European Research Council (ERC) through the project MHetScale (617511). The authors thank two anonymous referees for their comments and criticism., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Anomalous transport on regular fracture networks: Impact of conductivity heterogeneity and mixing at fracture intersections

  • Kang, Peter K.
  • Dentz, Marco
  • Le Borgne, Tanguy
  • Juanes, Rubén
We investigate transport on regular fracture networks that are characterized by heterogeneity in hydraulic conductivity. We discuss the impact of conductivity heterogeneity and mixing within fracture intersections on particle spreading. We show the emergence of non-Fickian transport due to the interplay between the network conductivity heterogeneity and the degree of mixing at nodes. Specifically, lack of mixing at fracture intersections leads to subdiffusive scaling of transverse spreading but has negligible impact on longitudinal spreading. An increase in network conductivity heterogeneity enhances both longitudinal and transverse spreading and leads to non-Fickian transport in longitudinal direction. Based on the observed Lagrangian velocity statistics, we develop an effective stochastic model that incorporates the interplay between Lagrangian velocity correlation and velocity distribution. The model is parameterized with a few physical parameters and is able to capture the full particle transition dynamics. © 2015 American Physical Society., PKK and RJ acknowledge the support of the US Department of Energy (grant DE-SC0003907), and a MISTI Global Seed Funds award. MD acknowledges the support of the European Research Council (ERC) through the project MHetScale (617511). TLB acknowledges the support of the INTERREG IV project CLIMAWAT. The data to reproduce the work can be obtained from the corresponding author, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Dissolution patterns and mixing dynamics in unstable reactive flow

  • Hidalgo, Juan J.
  • Dentz, Marco
  • Cabeza, Yoar
  • Carrera, Jesús
We study the fundamental problem of mixing and chemical reactions under a Rayleigh-Taylor-type hydrodynamic instability in a miscible two-fluid system. The dense fluid mixture, which is generated at the fluid-fluid interface, leads to the onset of a convective fingering instability and triggers a fast chemical dissolution reaction. Contrary to intuition, the dissolution pattern does not map out the finger geometry. Instead, it displays a dome-like, hierarchical structure that follows the path of the ascending fluid interface and the regions of maximum mixing. These mixing and reaction hot spots coincide with the flow stagnation points, at which the interfacial mixing layer is compressed and deformed. We show that the deformation of the boundary layer around the stagnation points controls the evolution of the global scalar dissipation and reaction rates and shapes the structure of the reacted zones. The persistent compression of the mixing layer explains the independence of the mixing rate from the Rayleigh number when convection dominates. ©2015. American Geophysical Union. All Rights Reserved., Data used for producing the figures can be obtained by solving the respective equations given in the manuscript. JJH and MD acknowledge the support of the European Research Council through the project MHetScale (FP7-IDEAS-ERC-617511). YC acknowledges funding by the FP7 EU project TRUST (FP7-ENERGY- 309067). JC acknowledges funding by the Spanish Ministry of Economy and Competitiveness project MEDISTRAES (CGL2013-48869-C2-1-R)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Intermittent Lagrangian velocities and accelerations in three-dimensional porous medium flow

  • Holzner, Markus
  • Morales, Verónica L.
  • Willmann, Matthias
  • Dentz, Marco
Intermittency of Lagrangian velocity and acceleration is a key to understanding transport in complex systems ranging from fluid turbulence to flow in porous media. High-resolution optical particle tracking in a three-dimensional (3D) porous medium provides detailed 3D information on Lagrangian velocities and accelerations. We find sharp transitions close to pore throats, and low flow variability in the pore bodies, which gives rise to stretched exponential Lagrangian velocity and acceleration distributions characterized by a sharp peak at low velocity, superlinear evolution of particle dispersion, and double-peak behavior in the propagators. The velocity distribution is quantified in terms of pore geometry and flow connectivity, which forms the basis for a continuous-time random-walk model that sheds light on the observed Lagrangian flow and transport behaviors. ©2015 American Physical Society., We acknowledge the contributions of R. Gallus and D. S¨agesser in the frame of a laboratory project, U. G¨ulan for help with data processing and W. Kinzelbach, T. LeBorgne, P. De Anna and P.K. Kang for stimulating discussions. Financial support is acknowledged from the Swiss National Science Foundation (SNF grant number 144645) for M.H., Marie Curie International Incoming Fellowships (FP7- PEOPLE-2012-SoilArchnAg) for V.L.M, and the European Research Council (ERC project MHetScale number 617511) for M.D., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Mixing-scale dependent dispersion for transport in heterogeneous flows

  • Dentz, Marco
  • Barros, Felipe P. J. de
Dispersion quantifies the impact of subscale velocity fluctuations on the effective movement of particles and the evolution of scalar distributions in heterogeneous flows. Which fluctuation scales are represented by dispersion, and the very meaning of dispersion, depends on the definition of the subscale, or the corresponding coarse-graining scale. We study here the dispersion effect due to velocity fluctuations that are sampled on the homogenization scale of the scalar distribution. This homogenization scale is identified with the mixing scale, the characteristic length below which the scalar is well mixed. It evolves in time as a result of local-scale dispersion and the deformation of material fluid elements in the heterogeneous flow. The fluctuation scales below the mixing scale are equally accessible to all scalar particles, and thus contribute to enhanced scalar dispersion and mixing. We focus here on transport in steady spatially heterogeneous flow fields such as porous media flows. The dispersion effect is measured by mixing-scale dependent dispersion coefficients, which are defined through a filtering operation based on the evolving mixing scale. This renders the coarse-grained velocity as a function of time, which evolves as velocity fluctuation scales are assimilated by the expanding scalar. We study the behaviour of the mixing-scale dependent dispersion coefficients for transport in a random shear flow and in heterogeneous porous media. Using a stochastic modelling framework, we derive explicit expressions for their time behaviour. The dispersion coefficients evolve as the mixing scale scans through the pertinent velocity fluctuation scales, which reflects the fundamental role of the interaction of scalar and velocity fluctuation scales in solute mixing and dispersion. © © 2015 Cambridge University Press., The authors thank three anonymous reviewers for their insightful comments. M.D. acknowledges the support of the European Research Council (ERC) through the project MHetScale (617511)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Multi-continuum Approach to Modelling Shale Gas Extraction

  • Russian, Anna
  • Gouze, Philippe
  • Dentz, Marco
  • Gringarten, Alain C.
Production rates in horizontal shale gas wells display declines that are controlled by the low permeability and the intrinsic heterogeneity of the shale matrix. We present an original multi-continuum approach that yields a physical model able to reproduce the complexity of the decreasing gas rates. The model describes the dynamics of gas rate as function of the physical reservoir parameters and geometry, while the shale matrix heterogeneity is accounted for by a stochastic description of transmissivity field. From the 3D (Dimensional) problem setting, including the heterogeneous shale matrix, the fractures generated by the hydrofracking operations, as well as the production well characteristics, we establish an effective upscaled 1D model for the gas pressures in fracture and matrix as well as the volumetric flux. We analyse the decline curves behaviour, and we identify the time scales that characterize the dynamics of the gas rate decline using explicit analytical Laplace space solutions of the upscaled process model. Asymptotically, the flux curves decrease exponentially, while in an intermediate regime we find a power-law behaviour, in which the flux scales with a power law in time as $$t^{-\beta }$$t-β, where $$\beta $$β reflects the medium heterogeneity. We use this solution to fit a set of real data displaying distinctly different decline trends and study the sensitivity of the model to the reservoir parameters in order to identify their respective controls at the different stages of the decline curve dynamics. Results indicate that the initial value of the gas rate is determined by the transmissivity of the fractures and the initial pressure of the gas in the shale matrix. The latter causes mainly a shift in the entire decline curve. The early time of decline curve shape is primarily controlled by the fracture properties (compressibility and transmissivity). During the main part of the economically valuable production times, i.e. before the production rate drops exponentially, the decline curve is strongly controlled by the properties of the shale rocks including their heterogeneity, which is modelled by two parameters describing the non-Fickian pressure diffusion effects in a stochastic framework. © 2015, Springer Science+Business Media Dordrecht., The authors gratefully acknowledge the financial support for this project from Imperial College, London, Joint Industry Project on Well Test Analysis in Complex Fluid-Well-Reservoir Systems, funded by BG Group, BHP-Billiton, Petro SA, Schlumberger and Eon-Rurhgas. They are grateful to BG Group and BHP-Billinton for providing the data used in this study. M.D. acknowledges the support of the European Research Council (ERC) through the project MHetScale (contract number 617511)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Regime shifts in bistable water-stressed ecosystems due to amplification of stochastic rainfall patterns

  • Cueto-Felgueroso, Luis
  • Dentz, Marco
  • Juanes, Rubén
We develop a framework that casts the point water-vegetation dynamics under stochastic rainfall forcing as a continuous-time random walk (CTRW), which yields an evolution equation for the joint probability density function (PDF) of soil-moisture and biomass. We find regime shifts in the steady-state PDF as a consequence of changes in the rainfall structure, which flips the relative strengths of the system attractors, even for the same mean precipitation. Through an effective potential, we quantify the impact of rainfall variability on ecosystem resilience and conclude that amplified rainfall regimes reduce the resilience of water-stressed ecosystems, even if the mean annual precipitation remains constant. ©2015 American Physical Society., To access the data in this article contact the corresponding author. MD acknowledges the support of the European Research Council through the project MHetScale (617511). LCF gratefully acknowledges a ’Ramon y Cajal’ Fellowship from the Spanish Ministry of Economy and Competitiveness (RyC-2012-11704), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Continuous time random walks for non-local radial solute transport

  • Dentz, Marco
  • Kang, Peter K.
  • Le Borgne, Tanguy
This study formulates and analyzes continuous time random walk (CTRW) models in radial flow geometries for the quantification of non-local solute transport induced by heterogeneous flow distributions and by mobile-immobile mass transfer processes. To this end we derive a general CTRW framework in radial coordinates starting from the random walk equations for radial particle positions and times. The particle density, or solute concentration is governed by a non-local radial advection-dispersion equation (ADE). Unlike in CTRWs for uniform flow scenarios, particle transition times here depend on the radial particle position, which renders the CTRW non-stationary. As a consequence, the memory kernel characterizing the non-local ADE, is radially dependent. Based on this general formulation, we derive radial CTRW implementations that (i) emulate non-local radial transport due to heterogeneous advection, (ii) model multirate mass transfer (MRMT) between mobile and immobile continua, and (iii) quantify both heterogeneous advection in a mobile region and mass transfer between mobile and immobile regions. The expected solute breakthrough behavior is studied using numerical random walk particle tracking simulations. This behavior is analyzed by explicit analytical expressions for the asymptotic solute breakthrough curves. We observe clear power-law tails of the solute breakthrough for broad (power-law) distributions of particle transit times (heterogeneous advection) and particle trapping times (MRMT model). The combined model displays two distinct time regimes. An intermediate regime, in which the solute breakthrough is dominated by the particle transit times in the mobile zones, and a late time regime that is governed by the distribution of particle trapping times in immobile zones. These radial CTRW formulations allow for the identification of heterogeneous advection and mobile-immobile processes as drivers of anomalous transport, under conditions relevant for field tracer tests. © 2015 Elsevier Ltd., MD acknowledges the support of the European Research Council (ERC) through the project MHetScale (contract number 617511). We thank Dr. Antoine Aubenau and two anonymous reviewers for their comments., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

The lamellar description of mixing in porous media

  • Le Borgne, Tanguy
  • Dentz, Marco
  • Villermaux, Emmanuel
We develop a general framework for modelling mixing in porous media flows, in which the scalar mixture is represented as an ensemble of lamellae evolving through stretching, diffusion and coalescence. Detailed numerical simulations in Darcy scale heterogeneous permeability fields are used to analyse the lamella deformation process, which controls the local concentration gradients and thus the evolution of the concentration mixture through stretching enhanced diffusion. The corresponding Lagrangian deformation process is shown to be well modelled by a Langevin equation with multiplicative noise, which can be coupled with diffusion to predict the temporal evolution of the concentration probability density function (PDF). At late times, lamella interaction is enforced by confinement of the mixture within the dispersion area. This process is shown to be well represented by a random aggregation model, which quantifies the frequency of lamella coalescence and allows us to predict the temporal evolution of the concentration PDF in this regime. The proposed theoretical framework provides an accurate prediction of the concentration PDFs at all investigated times, heterogeneity levels and Péclet numbers. In particular, it relates the temporal behaviour of mixing, as quantified by concentration moments, scalar dissipation rate or spatial increments of concentration, to the degree of structural heterogeneity. © Cambridge University Press 2015., Numerical simulations were performed with the numerical platform H20LAB (http://h2olab.inria.fr). TLB acknowledges the funding of the Marie Curie European Reintegration Grant (ERG) ReactiveFlows (230947). MD acknowledges the funding of the European Research Council (ERC) through the project MHetScale (617511)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Impact of velocity correlation and distribution on transport in fractured media: Field evidence and theoretical model

  • Kang, Peter K.
  • Le Borgne, Tanguy
  • Dentz, Marco
  • Bour, Olivier
  • Juanes, Rubén
Flow and transport through fractured geologic media often leads to anomalous (non-Fickian) transport behavior, the origin of which remains a matter of debate: whether it arises from variability in fracture permeability (velocity distribution), connectedness in the flow paths through fractures (velocity correlation), or interaction between fractures and matrix. Here we show that this uncertainty of distribution- versus correlation-controlled transport can be resolved by combining convergent and push-pull tracer tests because flow reversibility is strongly dependent on velocity correlation, whereas late-time scaling of breakthrough curves is mainly controlled by velocity distribution. We build on this insight, and propose a Lagrangian statistical model that takes the form of a continuous time random walk (CTRW) with correlated particle velocities. In this framework, velocity distribution and velocity correlation are quantified by a Markov process of particle transition times that is characterized by a distribution function and a transition probability. Our transport model accurately captures the anomalous behavior in the breakthrough curves for both push-pull and convergent flow geometries, with the same set of parameters. Thus, the proposed correlated CTRW modeling approach provides a simple yet powerful framework for characterizing the impact of velocity distribution and correlation on transport in fractured media. © 2014. American Geophysical Union. All Rights Reserved., The authors thank Nicolas Lavenant and Rebecca Hochreutener for their help in setting up and running the field experiments. Funding for this work was provided by the INTERREG IV project CLIMAWAT, the national network of hydrogeological sites H+ (hplus.ore.fr). MD acknowledges the support of the European Research Council (ERC) through the project MHetScale (617511). RJ acknowledges the support of the US Department of Energy (grant DE-SC0003907), and a MISTI Global Seed Funds award., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Impact of fluid deformation on mixing-induced chemical reactions in heterogeneous flows

  • Borgne, Tanguy Le
  • Ginn, Timothy R.
  • Dentz, Marco
Fast chemical reactions in geophysical flows are controlled by fluid mixing, which perturbs local chemical equilibria and thus triggers chemical reactions. Spatial fluctuations in the flow velocity lead to deformation of material fluid elements, which form the support volumes of transported chemical species. We develop an approach based on a lamellar representation of fluid mixing that provides a direct link between fluid deformation, the distribution of concentration gradients, and the upscaled reaction rates for fast reversible reactions. The temporal evolution of effective reaction rates is determined by the flow topology and the distribution of local velocity gradients. This leads to a significant increase of the reaction efficiency, which turns out to be orders of magnitude larger than in homogeneous flow. This approach allows for the systematic evaluation of the temporal evolution of equilibrium reaction rates and establishes a direct link between the reaction efficiency and the spatial characteristics of the underlying flow field as quantified by the deformation of material fluid elements. © 2014. American Geophysical Union. All Rights Reserved., Data used for producing the figures can be obtained by solving the respective equations given in the manuscript. MD acknowledges the support of the European Research Council (ERC) through the project MHetScale (617511)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Coupled continuous-time random walks for fluid stretching in two-dimensional heterogeneous media

  • Dentz, Marco
  • Lester, Daniel R.
  • Le Borgne, Tanguy
  • De Barros, Felipe P J
We study the relation between flow structure and fluid deformation in steady flows through two-dimensional heterogeneous media, which are characterized by a broad spectrum of stretching behaviors, ranging from sub- to superlinear. We analyze these behaviors from first principles, which uncovers intermittent shear events to be at the origin of subexponential stretching. We derive explicit expressions for Lagrangian deformation and demonstrate that stretching obeys a coupled continuous-time random walk, which for broad distributions of flow velocities becomes a Lévy walk. The derived model provides a direct link between the flow and deformation statistics, and a natural way to quantify the impact of intermittent shear events on the stretching behavior. © 2016 American Physical Society., MD acknowledges the support of the European Research Council (ERC) through the project MHetScale (contract number 617511). TLB acknowledges Agence National de Recherche (ANR) funding through the project ANR-14-CE04-0003-01., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Scalar gradients in stirred mixtures and the deconstruction of random fields

  • Le Borgne, Tanguy
  • Huck, Peter D.
  • Dentz, Marco
  • Villermaux, Emmanuel
A general theory for predicting the distribution of scalar gradients (or concentration differences) in heterogeneous flows is proposed. The evolution of scalar fields is quantified from the analysis of the evolution of elementary lamellar structures, which naturally form under the stretching action of the flows. Spatial correlations in scalar fields, and concentration gradients, hence develop through diffusive aggregation of stretched lamellae. Concentration levels at neighbouring spatial locations result from a history of lamella aggregation, which is partly common to the two locations. Concentration differences eliminate this common part, and thus depend only on lamellae that have aggregated independently. Using this principle, we propose a theory which envisions concentration increments as the result of a deconstruction of the basic lamella assemblage. This framework provides analytical expressions for concentration increment probability density functions (PDFs) over any spatial increments for a range of flow systems, including turbulent flows and low-Reynolds-number porous media flows, for confined and dispersing mixtures. Through this deconstruction principle, scalar increment distributions reveal the elementary stretching and aggregation mechanisms building scalar fields. © 2017 Cambridge University Press., TLB acknowledges the support of the European Research Council (ERC) through the project ReactiveFronts (648377) and of the Agence Nationale de la Recherche (ANR) through the project Subsurface mixing and reaction (ANR-14-CE04-0003). MD acknowledges the support of the European Research Council (ERC) through the project MHetScale (617511). EV acknowledges the Agence Nationale de la Recherche (ANR) for funding of the ANR-DFG grant TurbMix (ANR-14-CE35-0031-01)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Enhanced reaction kinetics and reactive mixing scale dynamics in mixing fronts under shear flow for arbitrary Damköhler numbers

  • Bandopadhyay, Aditya
  • Le Borgne, Tanguy
  • Méheust, Yves
  • Dentz, Marco
Mixing fronts, where fluids of different chemical compositions mix with each other, are known to represent hotspots of chemical reaction in hydrological systems. These fronts are typically subjected to velocity gradients, ranging from the pore scale due to no slip boundary conditions at fluid solid interfaces, to the catchment scale due to permeability variations and complex geometry of the Darcy velocity streamlines. A common trait of these processes is that the mixing interface is strained by shear. Depending on the Péclet number Pe, which represents the ratio of the characteristic diffusion time to the characteristic shear time, and the Damköhler number Da, which represents the ratio of the characteristic diffusion time to the characteristic reaction time, the local reaction rates can be strongly impacted by the dynamics of the mixing interface. So far, this impact has been characterized mostly either in kinetics-limited or in mixing-limited conditions, that is, for either low or high Da. Here the coupling of shear flow and chemical reactivity is investigated for arbitrary Damköhler numbers, for a bimolecular reaction and an initial interface with separated reactants. Approximate analytical expressions for the global production rate and reactive mixing scale are derived based on a reactive lamella approach that allows for a general coupling between stretching enhanced mixing and chemical reactions. While for Pe<Da, reaction kinetics and stretching effects are decoupled, a scenario which we name ”weak stretching”, for Pe>Da, we uncover a ”strong stretching” scenario where new scaling laws emerge from the interplay between reaction kinetics, diffusion, and stretching. The analytical results are validated against numerical simulations. These findings shed light on the effect of flow heterogeneity on the enhancement of chemical reaction and the creation of spatially localized hotspots of reactivity for a broad range of systems ranging from kinetic limited to mixing limited situations. © 2016 Elsevier Ltd, AB would gratefully like to acknowledge postdoctoral funding through the Agence Nationale de la Recherche (ANR-14-CE04-0003-01 {subsurface mixing and reaction). MD acknowledges the support of the European Research Council (ERC) through the project MHetScale (617511)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A spatial Markov model for the evolution of the joint distribution of groundwater age, arrival time, and velocity in heterogeneous media

  • Massoudieh, Arash
  • Dentz, Marco
  • Alikhani, Jamal
European Research Council (ERC), project MHetScale (contract no. 617511), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Reaction-diffusion with stochastic decay rates

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Anomalous dispersion in correlated porous media: A coupled continuous time random walk approach

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Self-averaging and weak ergodicity breaking of diffusion in heterogeneous media

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Stochastic dynamics of intermittent pore-scale particle motion in three–dimensional porous media: Experiments and theory

  • Morales, Verónica L.
  • Dentz, Marco
  • Willmann, Matthias
  • Holzner, Markus
Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Tesis doctoral (DoctoralThesis)

Mechanism and stochastic dynamics of transport in Darcy-scale heterogeneous porous media

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Effects of heterogeneity, connectivity and density variations on mixing and chemical reactions under temporally fluctuating flow conditions and the formation of reaction patterns

  • Pool, María
  • Dentz, Marco
Solute mixing, spreading, and fast chemical reactions in aquifers are strongly influenced by spatial variability of the hydraulic properties, temporal flow fluctuations, and fluid density differences. We study the coupling of heterogeneity, transient forcing, and density-driven flow on mixing and chemical reactions between two fluids of different density under a stable stratification. We consider the reaction of the fast dissolution of calcite. We find that temporal fluctuations and heterogeneity cause strong local enhancement of the mixing and reaction rates and this impact increases with the degree of connectivity of hydraulic conductivity. The global mixing and reactivity, however, are on the order of or smaller than their homogeneous counterparts due to heterogeneity-induced fluid segregation. The local maxima of the mixing and reaction rates are found to be located around strongly stretched regions corresponding to high velocity zones where dispersive mass transfer mechanisms are increased by dispersion. We also find that density variations compress the interface, which in turn emphasizes local maxima in mixing and reaction rates. Numerical results provide evidence that the stretching of the interface induced by spatial heterogeneity and transient effects coupled with density variations lead to the formation of complex patterns of reactive hotspots, zones of enhanced reaction efficiency, and that its distribution is directly linked to the deformation properties and topology of the flow field. These results provide new insights into the role of spatial and temporal variability on the mixing and reaction efficiency as well as the formation of reactive geochemical patterns in actual environmental systems., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Mixing across fluid interfaces compressed by convective flow in porous media

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Mechanisms of dispersion in a porous medium

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Evolution of a Solute Blob in Heteroge- neous Porous Media

  • Dentz, Marco
  • de Barros, F. P. J.
  • Le Borgne, T.
  • Lester, Daniel R.
We study the mixing dynamics of solute blobs in the flow through saturated heterogeneous porous media. As the solute plume is advected through a heterogeneous porous medium it suffers a series of deformations that determine its mixing with the ambient fluid through diffusion. Key questions are the relation between the spatial disorder and the mixing dynamics and the effect of the initial solute distribution. To address these questions, we formulate the advection-diffusion problem in a coordinate system that moves and rotates along streamlines of the steady flow field. The impact of the medium heterogeneity is quantified systematically within a stochastic modelling approach. For a simple shear flow, the maximum concentration of a blob decays asymptotically as . For heterogeneous porous media, the mixing of the solute blob is determined by the random sampling of flow and deformation heterogeneity along trajectories, a mechanism different from persistent shear. We derive explicit perturbation theory expressions for stretching-enhanced solute mixing that relate the medium structure and mixing behaviour. The solution is valid for moderate heterogeneity. The random sampling of shear along trajectories leads to a decay of the maximum concentration as opposed to an equivalent homogeneous medium, for which it decays as . © 2018 Cambridge University Press., European Research Council (ERC) through the project MHetScale (617511), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A coupled time domain random walk approach for transport in media characterized by broadly-distributed heterogeneity length scales

  • Aquino, Tomás
  • Dentz, Marco
We develop a time domain random walk approach for conservative solute transport in heterogeneous media where medium properties vary over a distribution of length scales. The spatial transition lengths are equal to the heterogeneity length scales, and thus determined by medium geometry. We derive analytical expressions for the associated transition times and probabilities in one spatial dimension. This approach determines the coarse-grained solute concentration at the interfaces between regions; we derive a generalized master equation for the evolution of the coarse-grained concentration and reconstruct the fine-scale concentration using the propagator of the subscale transport mechanism. The performance of this approach is demonstrated for diffusion under random retardation in power-law media characterized by heavy-tailed lengthscale and retardation distributions. The coarse representation preserves the correct late-time scaling of concentration variance, and the reconstructed fine-scale concentration is essentially identical to that obtained by direct numerical simulation by random walk particle tracking. © 2018 Elsevier Ltd, European Research Council (ERC) through the project MHetScale (617511), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Fluid Deformation in Random Steady Three Dimensional Flow

  • Lester, Daniel R.
  • Dentz, Marco
  • Le Borgne, T.
  • de Barros, F. P. J.
The deformation of elementary fluid volumes by velocity gradients is a key process for scalar mixing, chemical reactions and biological processes in flows. Whilst fluid deformation in unsteady, turbulent flow has gained much attention over the past half-century, deformation in steady random flows with complex structure - such as flow through heterogeneous porous media - has received significantly less attention. In contrast to turbulent flow, the steady nature of these flows constrains fluid deformation to be anisotropic with respect to the fluid velocity, with significant implications for e.g. longitudinal and transverse mixing and dispersion. In this study we derive an ab initio coupled continuous-time random walk (CTRW) model of fluid deformation in random steady three-dimensional flow that is based upon a streamline coordinate transform which renders the velocity gradient and fluid deformation tensors upper triangular. We apply this coupled CTRW model to several model flows and find that these exhibit a remarkably simple deformation structure in the streamline coordinate frame, facilitating solution of the stochastic deformation tensor components. These results show that the evolution of longitudinal and transverse fluid deformation for chaotic flows is governed by both the Lyapunov exponent and power-law exponent of the velocity probability distribution function at small velocities, whereas algebraic deformation in non-chaotic flows arises from the intermittency of shear events following similar dynamics as that for steady two-dimensional flow. © 2018 Cambridge University Press., European Research Council (ERC) through the project MHetScale (617511)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Analogue fracture experiments and analytical modeling of unsaturated percolation dynamics in fracture cascades

  • Noffz,T.
  • Dentz, Marco
  • Kordilla, J.
Infiltration and recharge dynamics in fractured aquifer systems often strongly deviate from diffuse Darcy–Buckingham type flows due to the existence of a complex gravity-driven flow component along fractures, fracture networks, and fault zones. The formation of preferential flow paths in the unsaturated or vadose zone can trigger rapid mass fluxes, which are difficult to recover by volume-effective modeling approaches (e.g., the Richards equation) due to the nonlinear nature of free-surface flows and mass partitioning processes at unsaturated fracture intersections. In this study, well-controlled laboratory experiments enabled the isolation of single aspects of the mass redistribution process that ultimately affect travel time distributions across scales. We used custom-made acrylic cubes (20 by 20 by 20 cm) in analog percolation experiments to create simple wide-aperture fracture networks intersected by one or multiple horizontal fractures. A high-pre-cision multichannel dispenser produced gravity-driven free-surface flow (droplets or rivulets) at flow rates ranging from 1 to 5 mL min −1 . Total inflow rates were kept constant while the fluid was injected via 15 (droplet flow) or three inlets (rivulet flow) to reduce the impact of erratic flow dynamics. Normalized fracture inflow rates were calculated and compared for aperture widths of 1 and 2.5 mm. A higher efficiency in filling an unsaturated fracture by rivulet flow observed in former studies was confirmed. The onset of a capillary-driven Washburn-type flow was determined and recovered by an analytical solution. To upscale the dynamics and enable the prediction of mass partitioning for arbitrary-sized fracture cascades, a Gaussian transfer function was derived that reproduces the repetitive filling of fractures, where rivulet flow is the prevailing regime. Results show good agreement with experimental data for all tested aperture widths. © Soil Science Society of America., This work was funded by the Deutsche Forschungsgemeinschaft (DFG; German Research Foundation) under Grant no. KO 53591/1-1 and supported by the Open Access Publication Funds of the University of Göttingen. Marco Dentz acknowledges the funding from the European Research Council under the European Union’s Seventh Framework Programme (FP7/2007-2013)/ERC Grant Agreement no. 617511 (MHetScale)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Upscaling of mixing-limited bimolecular chemical reactions in Poiseuille flow

  • Pérez, Lázaro J.
  • Hidalgo, Juan J.
  • Dentz, Marco
We consider the fast irreversible bimolecular chemical reaction urn:x-wiley:wrcr:media:wrcr23748:wrcr23748-math-0001 in the Poiseuille flow through a channel, in which A displaces B. This system allows to systematically study the impact of the interaction of interface deformation and diffusion on mixing and reactive transport. At early times, the reaction is diffusion controlled. With increasing time, advection begins to dominate and we find enhanced reaction efficiency due to the deformation of the interface between the two reactants. For times larger than the characteristic diffusion time across the channel, mixing and reaction are quantified by the Taylor dispersion coefficient. Predictions based on Taylor dispersion may significantly overestimate the reaction efficiency at preasymptotic times, when the system is characterized by incomplete mixing. This type of behaviors of incomplete mixing and reaction have been observed in heterogeneous systems across different scales. Channel flow allows to study them in detail for a well‐controlled system. We propose a dispersive lamella approach based on the concept of effective dispersion which accurately predicts the full evolution of the product mass. Specifically, this approach captures the impact of interface deformation and diffusive coalescence, which marks the transition to the Taylor regime. It gives insight into the mechanism of incomplete mixing and its consequences for reactive transport in more general porous media flows., We acknowledge the support of the European Research Council (ERC) through the project MHetScale (617511) and the Spanish Ministry of Economy, Industry and Competitiveness and the Eurpoean Regional Developement Fund (ERDF) (CGL2016‐80022‐R). The numerical data used in the article can be obtained by following the steps and using the parameter values detailed in the paper. We thank Alberto Bellin, Diogo Bolster, Editor Xavier Sanchez‐Vila, Associate Editor Daniel Fernandez‐Garcia, and two anonymous reviewers for their valuable comments and recommendations., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Reactive random walk particle tracking and its equivalence with the advection-diffusion-reaction equation

  • Pérez, L.
  • Hidalgo, Juan J.
  • Dentz, Marco
We present a reactive random walk particle-tracking approach to describe bimolecular chemical reactions and show its equivalence with the advection-diffusion-reaction equation. The method is able to efficiently simulate reactions in d-dimensional systems with homogeneous and spatially variable advection. Reactions among particles are determined by the reaction probability that is given in terms of the reaction rate coefficient, the total number of particles, and an interaction radius that describes the well-mixed support volume at which all particles have the same probability to interact. The method is meshless and free of numerical dispersion. The method is validated for the bimolecular irreversible chemical reaction A + B→C in scenarios characterized by slow and fast chemical kinetics under diffusion and heterogeneous advection and diffusion. ©2018. American Geophysical Union. All Rights Reserved., We acknowledge the support of the European Research Council (ERC) through the project MHetScale (617511) and the Spanish Ministry of Economy, Industry and Competitiveness, and European Regional Development Fund through the project MECMAT (CGL2016‐80022‐R). The numerical data can be reproduced following the numerical algorithms and parameter sets given in the paper. Alternatively, the data can be obtained upon request from the corresponding author., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Linking structural and transport properties in three-dimensional fracture networks

  • Hyman, J. D.
  • Dentz, Marco
  • Hagberg, A.
We investigate large-scale particle motion and solute breakthrough in sparse three-dimensional discrete fracture networks characterized by power law distributed fracture lengths. The three networks we consider have the same fracture intensity values but exhibit different percolation densities, geometric properties, and topological structures. We considered two different average transport models to predict solute breakthrough, a streamtube model and a Bernoulli continuous time random walk model, both of which provide insights into the flow fields within the networks. The streamtube model provides acceptable predictions at short distances in two of the networks but fails in all cases to predict breakthrough times at the outlet plane, which indicates that particle motion in such fracture networks cannot be characterized by a constant velocity between the inlet and control plane at which the breakthrough curve is detected. Rather, the structure of the network requires that frequent velocity transitions be made as particles move through the system. Despite the relatively broad distribution of fracture radii and relatively small number of independent velocity transitions, the continuous time random walk approach conditioned on the initial velocity distribution provides reasonable predictions for the breakthrough curves at different distances from the inlet. The application of these averaged transport models provides a richer understanding of the link from the fracture network structure to flow and transport properties. ©2019. American Geophysical Union. All Rights Reserved., J. D. H. and A. H. are thankful for support from Department of Energy at Los Alamos National Laboratory under contract DE-AC52-06NA25 396 through the Laboratory-Directed Research and Development Program. J. D. H. acknowledges support from the LANL LDRD program office Grant 20180621ECR. M. D. gratefully acknowledges the support of the European Research Council (ERC) through the project MHetScale (617511). P. K. K. acknowledges a grant from Korea Environment Industry & Technology Institute(KEITI) through Subsurface Environmental Management (SEM) Project, funded by Korea Ministry of Environment(MOE; 2018002440003). dfnworks can be obtained at https://github.com/lanl/dfnWorks and run files for simulations can obtained at https://gitlab.com/hymanjd/ hyman-jgr-2018.git., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Stochastic dynamics of Lagrangian pore-scale velocities in three-dimensional porous media

  • Puyguiraud, Alexandre
  • Gouze, P.
  • Dentz, Marco
Upscaling dispersion, mixing, and reaction processes from the pore to the Darcy scale is directly related to the understanding of the dynamics of pore-scale particle velocities, which are at the origin of hydrodynamic dispersion and non-Fickian transport behaviors. With the aim of deriving a framework for the systematic upscaling of these processes from the pore to the Darcy scale, we present a detailed analysis of the evolution of Lagrangian and Eulerian statistics and their dependence on the injection condition. The study is based on velocity data obtained from computational fluid dynamics simulations of Stokes flow and advective particle tracking in the three-dimensional pore structure obtained from high-resolution X-ray microtomography of a Berea sandstone sample. While isochronously sampled velocity series show intermittent behavior, equidistant series vary in a regular random pattern. Both statistics evolve toward stationary states, which are related to the Eulerian velocity statistics. The equidistantly sampled Lagrangian velocity distribution converges on only a few pore lengths. These findings indicate that the equidistant velocity series can be represented by an ergodic Markov process. A stochastic Markov model for the equidistant velocity magnitude captures the evolution of the Lagrangian velocity statistics. The model is parameterized by the Eulerian velocity distribution and a relaxation length scale, which can be related to hydraulic properties and the medium geometry. These findings lay the basis for a predictive stochastic approach to upscale solute dispersion in complex porous media from the pore to the Darcy scale. ©2019. American Geophysical Union. All Rights Reserved., The research leading to these results has received funding from the European Research Council under theEuropean Union's Seventh FrameworkProgramme (FP7/2007-2013)/ERCgrant agreement 617511 (MHetScale).This work was partially funded by theCNRS-PICS projet CROSSCALE,project 280090. Data and scripts usedin the paper are available at https://www.idaea.csic.es/mhetscale/.We thank Vladimir Cvetkovic, OlafCirpka, and Scott Painter for theinsightful and constructive comments., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Upscaling of anomalous pore-scale dispersion

  • Puyguiraud, Alexandre
  • Gouze, P.
  • Dentz, Marco
We study the upscaling of advective pore-scale dispersion in terms of the Eulerian velocity distribution and advective tortuosity, both flow attributes, and of the average pore length, a medium attribute. The stochastic particle motion is modeled as a time-domain random walk, in which particles move along streamlines in equidistant spatial steps with random velocities and thus random transition times. Particle velocities describe stationary spatial Markov processes, which evolve along streamlines on the mean pore length. The streamwise motion is projected onto the mean flow direction using tortuosity. This upscaled stochastic particle model predicts accurately the (non-Fickian) transport dynamics obtained from direct numerical simulations of particle transport in a three-dimensional digitized Berea sandstone sample. It captures all aspects of transport and sheds light on the dependence of the upscaled transport behavior on the flow heterogeneity and the initial particle distribution, which are critical for the accurate modeling of dispersion from the pre-asymptotic to asymptotic regimes., The research leading to these results has received funding from the European Research Council under the European Union’s Seventh Framework Programme (FP7/2007-2013)/ ERC Grant Agreement No. 617511 (MHetScale). This work was partially funded by the CNRS-PICS project CROSSCALE, project number 280090., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Kinetics of contact processes under segregation

  • Aquino, Tomás
  • Dentz, Marco
The kinetics of contact processes are determined by the interplay among local mass transfer mechanisms, spatial heterogeneity, and segregation. Determining the macroscopic behavior of a wide variety of phenomena across the disciplines requires linking reaction times to the statistical properties of spatially fluctuating quantities. We formulate the dynamics of advected agents interacting with segregated immobile components in terms of a chemical continuous-time random walk. The inter-reaction times result from the first-passage times of mobile species to and across reactive regions, and available immobile reactants undergo a restart procedure. Segregation leads to memory effects and enhances the role of concentration fluctuations in the large-scale dynamics., The authors acknowledge the support of the European Research Council (ERC) through the project MHetScale (617511)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Survival and confinement under quenched disorder

  • Aquino, Tomás
  • Lapeyre, Gerald John
  • Dentz, Marco
We study the survival and confinement of random walkers under quenched disorder characterized by spatially-varying waiting times and decay rates. Spatial heterogeneity and segregation lead to a dynamic coupling between transport and reaction, resulting in history-dependent dynamics exhibiting long survivals and confinement. The survival probability decays as a power law, in contrast to the classical exponential law for decay at a homogeneous rate. The mean squared displacement shows dimension-dependent subdiffusive growth followed by localization, with stronger confinement in higher dimensions. This journal is © the Owner Societies., The authors acknowledge the support of the European Research Council (ERC) through the project MHetScale (617511)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Mechanisms, Upscaling, and Prediction of Anomalous Dispersion in Heterogeneous Porous Media

  • Comolli, Alessandro
  • Hakoun, V.
  • Dentz, Marco
We study the upscaling and prediction of large-scale solute dispersion in heterogeneous porous media with focus on preasymptotic or anomalous features such as tailing in breakthrough curves and spatial concentration profiles as well as nonlinear evolution of the spatial variance of the concentration distribution. Spatial heterogeneity in the hydraulic medium properties is represented in a stochastic modeling approach. Direct numerical Monte Carlo simulations of flow and advective particle motion combined with a Markov model for streamwise particle velocities give insight in the mechanisms of preasymptotic and asymptotic solute transport in terms of the statistical signatures of the medium and flow heterogeneity. Based on the representation of equidistantly sampled particle velocities as a Markov process, we derive an upscaled continuous time random walk approach that can be conditioned on the flow velocities and thus hydraulic conductivity in the injection region. In this modeling framework, we identify the Eulerian velocity distribution, advective tortuosity, and the correlation length of particle velocities as the key quantities for large-scale transport prediction. Thus, the upscaled model predicts the spatial concentration profiles, their first and second centered moments, and the breakthrough curves obtained from direct numerical Monte Carlo simulations in spatially heterogeneous conductivity fields. The presented approach allows to relate the medium and flow properties to large-scale preasymptotic and asymptotic solute dispersion. ©2019. American Geophysical Union. All Rights Reserved., The research leading to these results has received funding from the European Research Council under the European Union's Seventh Framework Programme (FP7/2007‐2013) ERC Grant Agreement 617511 (MHetScale). The data presented in the paper can be accessed at the GitLab ( https://gitlab.com/marco.dentz/darcy‐simulations‐data )., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Upscaling and Prediction of Lagrangian Velocity Dynamics in Heterogeneous Porous Media

  • Hakoun, V.
  • Comolli, Alessandro
  • Dentz, Marco
The understanding of the dynamics of Lagrangian velocities is key for the understanding and upscaling of solute transport in heterogeneous porous media. The prediction of large-scale particle motion in a stochastic framework implies identifying the relation between the Lagrangian velocity statistics and the statistical characteristics of the Eulerian flow field and the hydraulic medium properties. In this paper, we approach both challenges from numerical and theoretical points of view. Direct numerical simulations of Darcy-scale flow and particle motion give detailed information on the evolution of the statistics of particle velocities both as a function of travel time and distance along streamlines. Both statistics evolve from a given initial distribution to different steady-state distributions, which are related to the Eulerian velocity probability density function. Furthermore, we find that Lagrangian velocities measured isochronally as a function of travel time show intermittency dominated by low velocities, which is removed when measured equidistantly as a function of travel distance. This observation gives insight into the stochastic dynamics of the particle velocity series. As the equidistant particle velocities show a regular random pattern that fluctuates on a characteristic length scale, it is represented by two stationary Markov processes, which are parametrized by the distribution of flow velocities and a correlation distance. The velocity Markov models capture the evolution of the Lagrangian velocity statistics in terms of the Eulerian flow properties and a characteristics length scale and shed light on the role of the initial conditions and flow statistics on large-scale particle motion. ©2019. American Geophysical Union. All Rights Reserved., 1Institute of Environmental Assessment and Water Research (IDAEA), Spanish Council of Scientific Research (CSIC), Barcelona, Spain, 2Nonlinear Physical Chemistry Unit, Faculté des Sciences, Université libre de Bruxelles (ULB), Brussels, Belgium Funding text #2 The authors thank Tanguy Le Borgne and Vladimir Cvetkovic for stimulating discussions. The authors acknowledge the support of the European Research Council (ERC) through the project MHetScale (contract 617511). The data presented in this study is based on numerical simulations of flow and particle transport in synthetic media and numerical solutions of the presented stochastic models. All the data can be generated by following the steps detailed in the paper., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Emergence of Stable Laws for First Passage Times in Three-Dimensional Random Fracture Networks

  • Hyman, Jeffrey De Haven
  • Dentz, Marco
  • Hagberg, Aric A.
  • Kang, Peter Kyungchul
We study first passage behaviors in the flow through three-dimensional random fracture networks. Network and flow heterogeneity lead to the emergence of heavy-tailed first passage time distributions that evolve with increasing distance between the start and target planes, and transition toward stable laws. Analysis of the spatial memory of the first passage process shows that particle motion can be quantified stochastically by a time domain random walk conditioned on the initial velocity data. This approach identifies advective tortuosity, the velocity point distribution and the average fracture link length as key quantities for the prediction of first passage times. Using this approach, we develop a theory for the evolution of first passage times with increasing distance between the start and target planes and the convergence towards stable laws. © 2019 American Physical, J.D.H. and A.H. are thankful for support from the US Department of Energy through the Los Alamos National Laboratory. Specifically, support through the Laboratory-Directed Research and Development Program grants 20180621ECR and 20170103DR. Los Alamos National Laboratory is operated by Triad National Security, LLC, for the National Nuclear Security Administration of U.S. Department of Energy (Contract No. 89233218CNA000001). J.D.H. also thanks the partial support of DOE’s Office of Science Basic Energy Sciences E3W1. M.D. gratefully acknowledges the support of the European Research Council (ERC) through the project MHetScale (617511). P.K.K. acknowledges a grant from the Korea Environment Industry & Technology Institute (KEITI) through Subsurface Environmental Management (SEM) Project, funded by the Korea Ministry of Environment (MOE) (2018002440003)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Stress-Induced Anomalous Transport in Natural Fracture Networks

  • Kang, Peter Kyungchul
  • Lei, Qinghua
  • Dentz, Marco
  • Juanes, Rubén
We investigate the effects of geological stress on fluid flow and tracer transport in natural fracture networks. We show the emergence of non-Fickian (anomalous) transport from the interplay among fracture network geometry, aperture heterogeneity, and geological stress. In this study, we extract the fracture network geometry from the geological map of an actual rock outcrop, and we simulate the geomechanical behavior of fractured rock using a hybrid finite-discrete element method. We analyze the impact of stress on the aperture distribution, fluid flow field, and tracer transport properties. Both stress magnitude and orientation have strong effects on the fracture aperture field, which in turn affects fluid flow and tracer transport through the system. We observe that stress anisotropy may cause significant shear dilation along long, curved fractures that are preferentially oriented to the stress loading. This, in turn, induces preferential flow paths and anomalous early arrival of tracers. An increase in stress magnitude enhances aperture heterogeneity by introducing more small apertures, which exacerbates late-time tailing. This effect is stronger when there is higher heterogeneity in the initial aperture field. To honor the flow field with strong preferential flow paths, we extend the Bernoulli Continuous Time Random Walk model to incorporate dual velocity correlation length scales. The proposed upscaled transport model captures anomalous transport through stressed fracture networks and agrees quantitatively with the high-fidelity numerical simulations. © 2019. American Geophysical, P. K. K. acknowledges the College of Science and Engineering at the University of Minnesota and the George and Orpha Gibson Endowment for its generous support of Hydrogeology. P. K. K. also acknowledges a grant from Korea Environment Industry and Technology Institute (KEITI) through Subsurface Environmental Management (SEM) Project, funded by Korea Ministry of Environment (MOE) W12530(2018002440003). M. D. acknowledges the support of the European Research Council (ERC) through the project MHetScale (617511). R. J. acknowledges funding by the U.S. Department of Energy Office of Science (grant DE-SC0018357). The digitized Bristol fracture network data are freely available through a data repository system at the University of Minnesota (https://doi.org/10.13020/ah7v-6n67)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Hydrodynamic Dispersion and Lamb Surfaces in Darcy Flow

  • Lester, Daniel R.
  • Bandopadhyay, Aditya
  • Dentz, Marco
  • Le Borgne, Tanguy
Transport processes such as the dispersion and mixing of solutes are governed by the interplay of advection and diffusion, where advection acts to organise fluid streamlines and diffusion acts to randomise solute molecules. Thus, the structure and organisation of streamlines, termed the Lagrangian kinematics of the flow, is central to the understanding and modelling of these transport processes. A key question is whether the streamlines in three-dimensional (3D) Darcy flows can wander freely through the fluid domain, or whether all streamlines of the flow are organised into a series of smooth, non-intersecting two-dimensional (2D) surfaces. The existence of such a foliation of surfaces constrains the Lagrangian kinematics in a manner similar to that of 2D flows, which in turn constrains the allowable transport processes. In a series of pioneering studies, Sposito (Water Resour. Res., 30(8):2395–2401, 1994; Adv. Water Resour., 24(7):793–801, 2001) argues that steady Darcy flow in locally isotropic media gives rise to Lamb surfaces, 2D material surfaces which are spanned by both the streamlines and vortex lines (field lines of the vorticity vector) of the flow. Hence, the existence of these surfaces renders the kinematics of such 3D steady Darcy flow as two dimensions. This topological constraint strongly affects transverse mixing and dispersion because 2D steady flow fields limit the rate of deformation of fluid elements and can only admit zero hydrodynamic transverse dispersion. In this study, however, we show that Lamb surfaces are not ubiquitous to all steady Darcy flows in locally isotropic media. We derive the conditions for when Lamb surfaces exist in such Darcy flows, and discuss the implications of these findings for the transport, mixing, and dispersion of solutes. © 2019, Springer Nature B.V., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Gas Diffusion in Coal Powders is a Multi-rate Process

  • Mathias, Simon A.M.
  • Dentz, Marco
  • Liu, Qingquan
Gas migration in coal is strongly controlled by surface diffusion of adsorbed gas within the coal matrix. Surface diffusion coefficients are obtained by inverse modelling of transient gas desorption data from powdered coals. The diffusion coefficient is frequently considered to be dependent on time and initial pressure. In this article, it is shown that the pressure dependence can be eliminated by performing a joint inversion of both the diffusion coefficient and adsorption isotherm. A study of the log–log slope of desorbed gas production rate against time reveals that diffusion within the individual coal particles is a multi-rate process. The application of a power-law probability density function of diffusion rates enables the determination of a single gas diffusion coefficient that is constant in both time and initial pressure. © 2019, The Author(s)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Stochastic model for filtration by porous materials

  • Miele, Filippo
  • De Anna, Pietro
  • Dentz, Marco
The transport of colloids in porous media is governed by deposition on solid surfaces and pore-scale flow variability. Classical approaches, like the colloid filtration theory (CFT), do not capture the behaviors observed experimentally, such as nonexponential steady-state deposition profiles and heavy tailed arrival time distributions. In the framework of CFT a key assumption is that the colloid attachment rate k is constant and empirically estimated by a posteriori macroscopic data fitting. We propose a stochastic model that explicitly accounts for variability of the pore-scale transport and attachment properties. Colloidal motion is modeled as a sequence of displacements whose velocity and extension are statistically distributed. Colloidal depositions are modeled as random events whose statistics are determined by flow velocity, pore size, and attachment rate. The resulting deposition profiles are, in general, nonexponential and can be predicted based on the disorder distributions. © 2019 American Physical Society., The research leading to these results has received funding from the European Research Council under the European Union's Seventh Framework Programme (FP7/2007-2013)/ERC Grant Agreement No. 617511 (MHetScale) and the Swiss National Science Foundation, Project No. 200021_172587, “Flows in confined micro-structures: Coupling physical heterogeneity and biochemical processes.”, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Is There a Representative Elementary Volume for Anomalous Dispersion?

  • Puyguiraud, Alexandre
  • Gouze, Philippe
  • Dentz, Marco
The concept of the representative elementary volume (REV) is often associated with the notion of hydrodynamic dispersion and Fickian transport. However, it has been frequently observed experimentally and in numerical pore-scale simulations that transport is non-Fickian and cannot be characterized by hydrodynamic dispersion. Does this mean that the concept of the REV is invalid? We investigate this question by a comparative analysis of the advective mechanisms of Fickian and non-Fickian dispersions and their representation in large-scale transport models. Specifically, we focus on the microscopic foundations for the modeling of pore-scale fluctuations of Lagrangian velocity in terms of Brownian dynamics (hydrodynamic dispersion) and in terms of continuous-time random walks, which account for non-Fickian transport through broad distributions of advection times. We find that both approaches require the existence of an REV that, however, is defined in terms of the representativeness of Eulerian flow properties. This is in contrast to classical definitions in terms of medium properties such as porosity, for example. © 2019, Springer Nature B.V., The research leading to these results has received funding from the European Research Council under the European Union’s Seventh Framework Programme (FP7/2007-2013)/ERC Grant Agreement No. 617511 (MHetScale). This work was partially funded by the CNRS-PICS project CROSSCALE, Project Number 280090. Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Characterizing the Influence of Fracture Density on Network Scale Transport

  • Sherman, Thomas
  • Hyman, Jeffrey
  • Dentz, Marco
  • Bolster, Diogo
The topology of natural fracture networks is inherently linked to the structure of the fluid velocity field and transport therein. Here we study the impact of network density on flow and transport behaviors. We stochastically generate fracture networks of varying density and simulate flow and transport with a discrete fracture network model, which fully resolves network topology at the fracture scale. We study conservative solute trajectories with Lagrangian particle tracking and find that as fracture density decreases, solute channelization to large local fractures increases, thereby reducing plume spreading. Furthermore, in sparse networks mean particle travel distance increases and local network features, such as velocity zones where flow is counter to the primary pressure gradient, become increasingly important for transport. As the network density increases, network statistics homogenize and such local features have a reduced impact. We quantify local topological influence on transport behavior with an effective tortuosity parameter, which measures the ratio of total advective distance to linear distance at the fracture scale; large tortuosity values are correlated to slow‐velocity regions. These large tortuosity, slow‐velocity regions delay downstream transport and enhance tailing on particle breakthrough curves. Finally, we predict transport with an upscaled, Bernoulli spatial Markov random walk model and parameterize local topological influences with a novel tortuosity parameter. Bernoulli model predictions improve when sampling from a tortuosity distribution, as opposed to a fixed value as has previously been done, suggesting that local network topological features must be carefully considered in upscaled modeling efforts of fracture network systems., T. S. is supported by the National Science Foundation Graduate Research Fellowship under Grant DGE‐1841556. D. B. was supported by the US Army Research Office under Contract/Grant W911NF‐18‐1‐0338 and by the National Science Foundation under award CBET‐1803989. Los Alamos National Laboratory is operated by Triad National Security, LLC, for the National Nuclear Security Administration of U.S. Department of Energy (Contract 89233218CNA000001). J. D. H. acknowledges support from the LANL LDRD program office Grant 20180621ECR and DOE's Office of Science Basic Energy SciencesE3W1: LA‐UR‐19‐27671. M. D. acknowledges funding from the European Research Council under the European Union's Seventh Framework Programme (FP7/2007‐2013)/ ERC Grant Agreement 617511 (MHetScale). DFNWORKS and and simulation data can be obtained at GitHub (https://github.com/lanl/dfnWorks and https://github.com/tjsherman24/FractureNetworkDensity, respectively)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Diffusion in Porous Media: Phenomena and Mechanisms

  • Tartakovsky, Daniel M.
  • Dentz, Marco
Two distinct but interconnected approaches can be used to model diffusion in fluids; the first focuses on dynamics of an individual particle, while the second deals with collective (effective) motion of (infinitely many) particles. We review both modeling strategies, starting with Langevin’s approach to a mechanistic description of the Brownian motion in free fluid of a point-size inert particle and establishing its relation to Fick’s diffusion equation. Next, we discuss its generalizations which account for a finite number of finite-size particles, particle’s electric charge, and chemical interactions between diffusing particles. That is followed by introduction of models of molecular diffusion in the presence of geometric constraints (e.g., the Knudsen and Fick–Jacobs diffusion); when these constraints are imposed by the solid matrix of a porous medium, the resulting equations provide a pore-scale representation of diffusion. Next, we discuss phenomenological Darcy-scale descriptors of pore-scale diffusion and provide a few examples of other processes whose Darcy-scale models take the form of linear or nonlinear diffusion equations. Our review is concluded with a discussion of field-scale models of non-Fickian diffusion. © 2019, Springer Nature B.V., This research was supported in part by US National Science Foundation (NSF) under Award Number CBET-1606192 issued to DMT, and by the European Research Council (ERC) through the Project MHetScale (617511) issued to MD., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Upscaling Flow and Transport Processes

  • Icardi, Matteo
  • Boccardo, Gianluca
  • Dentz, Marco
This chapter deals with flow, transport and reaction processes in porous and heterogeneous media characterised by multiple spatial scales. Although the governing equations, at the micro-scale, are simple (and often linear), complex upscaled (effective macro-scale) phenomena can emerge, due to the averaging process. After introducing some general concepts related to multiscale porous media, we present the Darcy’s equation and its assumptions and extensions. A more detailed analysis of dispersion theories for pore-scale and continuum-scale (with Darcy’s flow) solute transport is then carried out, presenting the classical results as well as the most recent research in the field. We then focus on the interaction between dispersion and reaction, through mixing, as well as more complex processes like particle deposition and multiphase flows., This article/publication is based upon the work from COST Action MP1305, supported by COST (European Cooperation in Science and Technology). COST (European Cooperation in Science and Technology; www.cost.eu) is a funding agency for research and innovation networks. Our Actions help connect research initiatives across Europe and enable scientists to grow their ideas by sharing them with their peers. This boosts their research, career and innovation., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Assessment and Prediction of Pore‐Scale Reactive Mixing From Experimental Conservative Transport Data

  • Pérez, Lázaro J.
  • Hidalgo, Juan J.
  • Puyguiraud, Alexandre
  • Jiménez‐Martínez, Joaquín
  • Dentz, Marco
We investigate the impact of pore‐scale heterogeneity on reactive mixing using experimental data from inert fluid‐fluid displacement in a quasi 2‐D porous medium. We interpret the invading and defending fluids as the conservative components A+C and B+C of the instantaneous irreversible bimolecular chemical reaction A+B→C and determine the reaction product C. We find strong growth of the reaction rate at short and intermediate times due to deformation of the mixing interface and heterogeneity‐induced increase of the mixing area. This behavior is captured by a dispersive lamella approach that quantifies the mixing dynamics at the interface in terms of temporally evolving effective dispersion coefficients. The latter capture the dominant controls on the evolution of the mixing interface, namely, advective heterogeneity and transverse mixing. Reactive transport formulations based on constant hydrodynamic dispersion coefficients are not able to describe the observed behavior due to the lack of complete mixing on the support scale, which is required for these approaches to hold. These results shed some new light on the origins of heterogeneity‐induced mixing and reaction dynamics in porous media and their systematic upscaling., EC | FP7 | FP7 Ideas: European Research Council (FP7 Ideas). Grant Number: 617511 Ministerio de ciencia, innovación y universidades. Grant Number: RYC-2017-22300 European Research Council (ERC). Grant Number: 617511 Spanish Ministry of Science and Innovation. Grant Number: CEX2018-000794-S Spanish Ministry of Innovation and Universities. Grant Number: RYC-2017-22300, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Upscaling non-linear reactive transport in correlated velocity fields

  • Massoudieh, Arash
  • Dentz, Marco
While commonly non-local transport models have been shown to reproduce breakthrough curves resulting from transport in heterogeneous aquifers successfully, open questions include the formal link between the upscaled governing equations and the sub-scale heterogeneity, and the ability to account for the effect of heterogeneity on effective chemical reaction rates in the presence of non-linear multi-component reactions. Time-domain random walk approaches based on velocity Markov models provide a framework to resolve these issues by incorporating the spatial correlation of velocity of a solute particle in consecutive locations along its trajectory. These approaches often rely on particle tracking approaches, which, however, can be computationally burdensome especially when non-linear reactions are sought to be modeled. In this paper, an integro-differential equation is proposed for upscaling multi-component reactive transport in heterogeneous media that relies on copulas for representing the velocity correlation structure. For this purpose, we express concentration or flux of solutes as a distribution over their velocity. We then derive the integro-differential equation that governs the evolution of concentration distribution over a quantity defined as velocity-rank. In this way, the spatial evolution of breakthrough curves away from the source is predicted based on ergodic cross-sectional velocity distributions and a parameterized copula function which expresses the correlation between velocity-ranks of a solute particle along its trajectory. We demonstrate the validity of the proposed model by comparing breakthrough curves for conservative and non-linearly reacting solutes based on realizations of hydraulic conductivity fields to the results of the upscaled model., Marco Dentz acknowledges the support of the European Research Council (ERC) through the project MHetScale (617511)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Effective dispersion coefficients for the upscaling of pore-scale mixing and reaction

  • Puyguiraud, Alexandre
  • Pérez, Lázaro J.
  • Hidalgo, Juan J.
  • Dentz, Marco
We upscale reactive mixing using effective dispersion coefficients to capture the combined effect of pore-scale heterogeneity and molecular diffusion on the evolution of the mixing interface between two initially segregated dissolved species. Effective dispersion coefficients are defined in terms of the average spatial variance of the solute distribution evolving from a pointlike injection, that is, the transport Green function. We numerically investigate the temporal behavior of the longitudinal effective dispersion coefficients for two porous media of different pore-scale heterogeneity as measured by the statistics of the flow speed, and different Péclet numbers. We find that the effective dispersion coefficients evolve with time, or equivalently travel distance. As the solute samples the pore-scale flow heterogeneity due to advection and transverse diffusion, the effective dispersion coefficients evolve from the value of molecular diffusion to the corresponding hydrodynamic dispersion coefficients. Thus, at times smaller than the diffusion time over a characteristic pore length, the effective dispersion coefficients can be significantly smaller than the hydrodynamic dispersion coefficients. This difference can explain frequently observed mismatches between pore-scale reactive mixing data, and predictions using Darcy scale transport descriptions based on hydrodynamic dispersion coefficients that are constant in time. This suggests that the notion of incomplete mixing on the support scale can be quantified in terms of effective pore-scale dispersion coefficients. We use effective dispersion in order to approximate the transport Green function in terms of a Gaussian-shaped distribution that is characterized by the effective variance. This is approximation is termed dispersive lamella. Based on this representation, we study reactive mixing between two initially segregated solutes. The dispersive lamella approach accurately predicts the evolution of the product mass of an instantaneous bimolecular reaction obtained from direct numerical simulations. This demonstrates that effective dispersion is an accurate measure for width of the mixing interface between the two reacting species. These results shed some new light on pore-scale mixing, the notion of incomplete mixing, and its prediction and upscaling in terms of an effective mixing model., This work has been supported by the European Research Council under the European Union’s Seventh Framework Programme (FP7/2007-2013)/ ERC Grant Agreement No. 617511 (MHetScale) and the Spanish Ministry of Science and Innovation through the project HydroPore (PID2019-106887GB-C31). Juan J. Hidalgo acknowledges the support of the Spanish Ministry of Science and Innovation through the Ramon y Cajal program., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Anomalous Transport in Three‐Dimensional Discrete Fracture Networks: Interplay Between Aperture Heterogeneity and Injection Modes

  • Kang, Peter K.
  • Hyman, Jeffrey D.
  • Shik Han, Weon
  • Dentz, Marco
We study how the interplay between fracture aperture heterogeneity and tracer injection mode controls fluid flow and tracer transport in three‐dimensional (3D) discrete fracture networks (DFNs). The direct 3‐D DFN simulations show that tracer injection mode has substantial effects on tracer spreading across all levels of aperture heterogeneity. The key controlling factor for effective transport is the initial Lagrangian velocity distribution, which is determined by the interplay between injection mode and aperture heterogeneity. The fundamental difference between initial Lagrangian velocity distribution and domain‐scale Eulerian velocity distribution plays a vital role in determining anomalous transport. We effectively capture the observed anomalous transport using an upscaled transport model that incorporates initial velocity distribution, stationary velocity distribution, velocity correlation length, and average advective tortuosity. With the upscaled transport model, we accurately capture the evolution of Lagrangian velocity distribution and predict longitudinal spreading in 3‐D DFN., PKK acknowledges the College of Science & Engineering at the University of Minnesota and the George and Orpha Gibson Endowment for its generous support of Hydrogeology. PKK and WSH acknowledge a grant from Korea Environment Industry and Technology Institute (KEITI) through Subsurface Environmental Management (SEM) Project, funded by the Korea Ministry of Environment (MOE) (2018002440003). MD acknowledges the support of the European Research Council (ERC) through the project MHetScale (617511), and the support of the Spanish Ministry of Science and Innovation through a Severo Ochoa project (No. CEX2018324 000794‐S), and the project HydroPore (PID2019‐106887GB‐C31). JDH acknowledges support from the LANL LDRD program office Grant 20180621ECR and thanks to the Department of Energy (DOE) Basic Energy Sciences program (LANLE3W1) for support as well., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Transport Upscaling in Highly Heterogeneous Aquifers and the Prediction of Tracer Dispersion at the MADE Site

  • Dentz, Marco
  • Comolli, Alessandro
  • Hakoun, Vivien
  • Hidalgo, Juan J.
We present an upscaled Lagrangian approach to predict the plume evolution in highly heterogeneous aquifers. The model is parameterized by transport‐independent characteristics such as the statistics of hydraulic conductivity and the Eulerian flow speed. It can be conditioned on the tracer properties and flow data at the injection region. Thus, the model is transferable to different solutes and hydraulic conditions. It captures the large‐scale non‐Gaussian features for the evolution of the longitudinal mass distribution observed for the bromide and tritium tracer plumes at the Macrodispersion Experiment (MADE) site (Columbus, Mississippi, USA), which are characterized by a slow moving peak and pronounced forward tailing. These large‐scale features are explained by advective tracer propagation due to a broad distribution of spatially persistent Eulerian flow speeds as a result of spatial variability in hydraulic conductivity., We thank Daniel Fernandez‐Garcia for sharing the data for the two concentration snapshots of the MADE‐2 experiment and Alraune Zech and Aldo Fiori for sharing the MADE‐1 data with us. The authors acknowledge the financial support of the European Research Council through the project MHetScale (Grant Agreement No. 617511) and the Spanish Ministry of Science and Innovation through a Severo Ochoa project (No. CEX2018‐000794‐S) and the project HydroPore (PID2019‐106887GB‐C31). Juan J. Hidalgo acknowledges the support of the Spanish Ministry of Science and Innovation through a Ramón y Cajal fellowship (No. RYC‐2017‐22300). Alessandro Comolli acknowledges support through the Prodex grant CHYPI., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Competition Is the Underlying Mechanism Controlling Viscous Fingering and Wormhole Growth

  • Cabeza, Yoar
  • Hidalgo, Juan J.
  • Carrera, Jesús
Viscous fingering and wormhole growth are complex nonlinear unstable phenomena. We view both as the result of competition for water in which the capacity of an instability to grow depends on its ability to carry water. We derive empirical solutions to quantify the finger/wormhole flow rate in single-, two-, and multiple-finger systems. We use these solutions to show that fingering and wormhole patterns are a deterministic result of competition. For wormhole growth, controlled by dissolution, we solve reactive transport analytically within each wormhole to compute dissolution at the wormhole walls and tip. The generated patterns (both for viscous fingering and wormhole growth under moderate Damköhler number values) follow a power law decay of the number of fingers/wormholes with depth with an exponent of −1 consistent with field observations., Data used for producing the figures can be downloaded from digital.csic.es (https://digital.csic.es/handle/10261/194482) and by solving the respective equations. We thank Szymczak for the helpful discussion and for providing the wormhole data. J. J. H. acknowledges the support of the European Social Fund and Spanish Ministry of Ministry of Science, Innovation and Universities through the “Ramón y Cajal” fellowship (RYC‐2017‐22300) and the European Research Council through the project MHetScale (FP7‐IDEAS‐ERC‐617511). Y. C. and J. C. acknowledge funding from Horizon 2020 EU project ACWAPUR (645782). J. C. acknowledges funding by the Spanish Ministry of Economy and Competitiveness project MEDISTRAES‐II (CGL2013‐48869‐C2‐2‐R).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Optimal fluid stretching for mixing-limited reactions in rough channel flows

  • Yoon, Seon
  • Dentz, Marco
  • Kang, Peter K.
We study the reactive displacement of two miscible fluids in channel flows and establish a quantitative link between fluid stretching and chemical reactivity. At the mixing interface, the two fluids react according to the instantaneous irreversible bimolecular reaction A+B→C . We simulate the advection–diffusion–reaction problem using a random walk based reactive particle method that is free of numerical dispersion. The relative contributions of stretching and diffusion to mixing-limited reaction is controlled by changing the Péclet number, and the channel roughness is also systematically varied. We observe optimal ranges of fluid stretching that maximize reactivity, which are captured by a Lagrangian stretching measure based on an effective time period that honours the stretching history. We show that the optimality originates from the competition between the enhanced mixing by fluid stretching and the mass depletion of the reactants. We analytically derive the spatial distribution of reaction products using a lamellar formulation and successfully predict the optimal ranges of fluid stretching, which are consistent across different levels of channel roughness. These findings provide a mechanistic understanding of how the interplay between fluid stretching, diffusion and channel roughness controls mixing-limited reactions in rough channel flows, and show how reaction hot spots can be predicted from the concept of optimal fluid stretching., S.Y. and P.K.K. acknowledge a grant from Korea Environment Industry and Technology Institute (KEITI) through Subsurface Environmental Management (SEM) Project (2020002440002), funded by the Korea Ministry of Environment (MOE). P.K.K. acknowledges MnDRIVE Advancing Industry, Conserving Our Environment at the University of Minnesota. M.D. acknowledges funding of the European Research Council (ERC) through the project MHetScale (contract number 617511), and the Spanish Research Agency (AEI) through the project HydroPore (contract number PID2019-106887GB-C31). We thank the Minnesota Supercomputing Institute (MSI) at the University of Minnesota for computational resources and support., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Pore-Scale Mixing and the Evolution of Hydrodynamic Dispersion in Porous Media

  • Puyguiraud, Alexandre
  • Gouze, Philippe
  • Dentz, Marco
We study the interplay of pore-scale mixing and network-scale advection through heterogeneous porous media, and its role for the evolution and asymptotic behavior of hydrodynamic dispersion. In a Lagrangian framework, we identify three fundamental mechanisms of pore-scale mixing that determine large scale particle motion, namely, the smoothing of intrapore velocity contrasts, the increase of the tortuosity of particle paths, and the setting of a maximum time for particle transitions. Based on these mechanisms, we derive a theory that predicts anomalous and normal hydrodynamic dispersion in terms of the characteristic pore length, Eulerian velocity distribution, and Péclet number., A. P. and M. D. gratefully acknowledge the support of the FP7 European Research Council (ERC) through the consolidator project MHetScale (617511) and the Spanish Ministry of Science and Innovation through the project HydroPore (PID2019–106887 GB-C31). The authors gratefully acknowledge the support of the CNRS-PICS project CROSSCALE (Project No. 280090)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A Comparison of Six Transport Models of the MADE-1 Experiment Implemented With Different Types of Hydraulic Data

  • Zech, Alraune
  • Attinger, Sabine
  • Bellin, Alberto
  • Cvetkovic, Vladimir
  • Dagan, Gedeon
  • Dentz, Marco
  • Dietrich, Peter
  • Fiori, Aldo
  • Teutsch, Georg
Six conceptually different transport models were applied to the macrodispersion experiment (MADE)-1 field tracer experiment as a first major attempt for model comparison. The objective was to show that complex mass distributions in heterogeneous aquifers can be predicted without calibration of transport parameters, solely making use of structural and flow data. The models differ in their conceptualization of the heterogeneous aquifer structure, computational complexity, and use of conductivity data obtained from various observation methods (direct push injection logging, DPIL, grain size analysis, pumping tests and flowmeter). They share the same underlying physical transport process of advection by the velocity field solely. Predictive capability is assessed by comparing results to observed longitudinal mass distributions of the MADE-1 experiment. The decreasing mass recovery of the observed plume is attributed to sampling and no physical process like mass transfer is invoked by the models. Measures like peak location and strength are used in comparing the modeled and measured plume mass distribution. Comparison of models reveals that the predictions of the solute plume agree reasonably well with observations, if the models are underlain by a few parameters of close values: mean velocity, a parameter reflecting log-conductivity variability, and a horizontal length scale related to conductivity spatial correlation. The robustness of the results implies that conservative transport models with appropriate conductivity upscaling strategies of various observation data provide reasonable predictions of plumes longitudinal mass distribution, as long as key features are taken into account., The authors thank Marco Bianchi and Boris Baeumer for their support during the development of the study. A. Fiori and A. Bellin acknowledge funding from the Italian Ministry of Education, University and Research (MIUR) in the frame of the Departments of Excellence Initiative 2018–2022 granted to Dept. of Engineering of Roma Tre University, and to the Dept. of Civil, Environmental and Mechanical Engineering of the University of Trento, respectively. M. Dentz acknowledges funding of the European Research Council (ERC) through the project MHetScale (contract number 617511), and the Spanish Research Agency (AEI) through the project HydroPore (contract number PID2019-106887GB-C31)., Peer reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Tracer test modeling for characterizing heterogeneity and local-scale residence time distribution in an artificial recharge site

  • Valhondo González, Cristina|||0000-0002-4009-5476
  • Martínez Landa, Lourdes|||0000-0002-4823-9892
  • Carrera Ramírez, Jesús|||0000-0002-8054-4352
  • Hidalgo, Juan J.
  • Tubau Fernandez, Isabel
  • De Pourcq, Katrien
  • Grau Martinez, Alba
  • Ayora Ibáñez, Carlos
Artificial recharge of aquifers is a technique for improving water quality and increasing groundwater resources. Understanding the fate of a potential contaminant requires knowledge of the residence time distribution (RTD) of the recharged water in the aquifer beneath. A simple way to obtain the RTDs is to perform a tracer test. We performed a pulse injection tracer test in an artificial recharge system through an infiltration basin to obtain the breakthrough curves, which directly yield the RTDs. The RTDs turned out to be very broad and we used a numerical model to interpret them, to characterize heterogeneity, and to extend the model to other flow conditions. The model comprised nine layers at the site scaled to emulate the layering of aquifer deposits. Two types of hypotheses were considered: homogeneous (all flow and transport parameters identical for every layer) and heterogeneous (diverse parameters for each layer). The parameters were calibrated against the head and concentration data in both model types, which were validated quite satisfactorily against 1,1,2-Trichloroethane and electrical conductivity data collected over a long period of time with highly varying flow conditions. We found that the broad RTDs can be attributed to the complex flow structure generated under the basin due to three-dimensionality and time fluctuations (the homogeneous model produced broad RTDs) and the heterogeneity of the media (the heterogeneous model yielded much better fits). We conclude that heterogeneity must be acknowledged to properly assess mixing and broad RTDs, which are required to explain the water quality improvement of artificial recharge basins., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Scale dependence of the hydraulic properties of a fractured aquifer estimated using transfer functions

  • Pedretti, Daniele
  • Russian, Anna
  • Sánchez Vila, Francisco Javier|||0000-0002-1234-9897
  • Dentz, Marco|||0000-0002-3940-282X
This is the peer reviewed version of the following article: [Pedretti, D., A. Russian, X. Sanchez-Vila, and M. Dentz (2016), Scale dependence of the hydraulic properties of a fractured aquifer estimated using transfer functions, Water Resour. Res., 52, 5008–5024, doi:10.1002/2016WR018660. ], which has been published in final form at http://onlinelibrary.wiley.com/doi/10.1002/2016WR018660/abstract. This article may be used for non-commercial purposes in accordance with Wiley Terms and Conditions for Self-Archiving., We present an investigation of the scale dependence of hydraulic parameters in fractured media based on the concept of transfer functions (TF). TF methods provide an inexpensive way to perform aquifer parameter estimation, as they relate the fluctuations of an observation time series (hydraulic head fluctuations) to an input function (aquifer recharge) in frequency domain. Fractured media are specially sensitive to this approach as hydraulic parameters are strongly scale-dependent, involving nonstationary statistical distributions. Our study is based on an extensive data set, involving up to 130 measurement points with periodic head measurements that in some cases extend for more than 30 years. For each point, we use a single-porosity and dual-continuum TF formulation to obtain a distribution of transmissivities and storativities in both mobile and immobile domains. Single-porosity TF estimates are compared with data obtained from the interpretation of over 60 hydraulic tests (slug and pumping tests). Results show that the TF is able to estimate the scale dependence of the hydraulic parameters, and it is consistent with the behavior of estimates from traditional hydraulic tests. In addition, the TF approach seems to provide an estimation of the system variance and the extension of the ergodic behavior of the aquifer (estimated in approximately 500 m in the analyzed aquifer). The scale dependence of transmissivity seems to be independent from the adopted formulation (single or dual-continuum), while storativity is more sensitive to the presence of multiple continua., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Dissolution patterns and mixing dynamics in unstable reactive flow

  • Hidalgo, Juan J.
  • Dentz, Marco|||0000-0002-3940-282X
  • Cabeza Diaz de Ceiro, Yoar
  • Carrera Ramírez, Jesús|||0000-0002-8054-4352
We study the fundamental problem of mixing and chemical reactions under a Rayleigh-Taylor-type hydrodynamic instability in a miscible two-fluid system. The dense fluid mixture, which is generated at the fluid-fluid interface, leads to the onset of a convective fingering instability and triggers a fast chemical dissolution reaction. Contrary to intuition, the dissolution pattern does not map out the finger geometry. Instead, it displays a dome-like, hierarchical structure that follows the path of the ascending fluid interface and the regions of maximum mixing. These mixing and reaction hot spots coincide with the flow stagnation points, at which the interfacial mixing layer is compressed and deformed. We show that the deformation of the boundary layer around the stagnation points controls the evolution of the global scalar dissipation and reaction rates and shapes the structure of the reacted zones. The persistent compression of the mixing layer explains the independence of the mixing rate from the Rayleigh number when convection dominates., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Tesis doctoral (DoctoralThesis)

Mechanism and stochastic dynamics of transport in Darcy-scale heterogeneous porous media

  • Comolli, Alessandro
Solute transport in heterogeneous porous media in general exhibits anomalous behaviors, in the sense that it is characterized by features that cannot be explained in terms of traditional models based on the advection-dispersion equation with constant effective coefficients. Signatures of anomalous transport are the non-linear temporal growth of the variance of solute concentration, non- Gaussian density profiles and heavy-tailed breakthrough curves. Understanding and predicting transport behavior in groundwater systems is crucial for several environmental and industrial applications, including groundwater management and risk assessment for nuclear waste repositories. The complexity of this task lies in the intrinsic multi-scale heterogeneity of geological formations and in the large amount of degrees of freedom. Hence, the predictive description of transport requires a process of upscaling that is based on measurable medium and flow attributes. The time domain random walk (TDRW) and continuous time random walk (CTRW) approaches provide suitable frameworks for transport upscaling. In this thesis, we identify different mechanisms that induce anomalous transport and we quantify their impact on transport attributes. We propose average transport models that can be parameterized in terms of flow and medium properties. Among the mechanisms that induce non-Fickian behaviors, a pivotal role is played by the heterogeneity of the flow field, which is directly linked to medium disorder. Due to its importance, the impact of advective heterogeneity is studied throughout the thesis, alongside with other mechanisms. First, we consider solute trapping due to physical or chemical heterogeneity, which we parameterize in terms of a constant trapping rate and a distribution of return times. We observe three distinct transport regimes that are linked to characteristic trapping time scales. At early times, transport is advection- controlled until particles start to get trapped. Then, the increasing distance between mobile and immobile particles gives rise to a superdiffusive regime which finally evolves towards a trapping-controlled regime. Second, we study transport in correlated porous media. We show that particle motion describes a coupled CTRW that is parameterized in terms of the distribution of flow velocity and length scales. We show that disorder and correlation may lead to similar behaviors in terms of displacement moments, but the difference between these mechanisms is manifest in the distributions of particle positions and arrival times. Next, we study the relationship between flow and transport properties and the impact of different injection conditions on transport. To this end, the relationship between Eulerian and Lagrangian velocities is investigated. Lagrangian statistics evolves to a steady-state that depends on the injection conditions. We study the velocity organization in Darcy flows and we develop a CTRW model for transport that is parameterized in terms of flow and medium attributes only. This CTRW accounts for non-stationarity through Markovian velocity models. We study the impact of advective heterogeneity by considering different disorder scenarios. Finally, we quantify the impact of diffusion in layered and fibrous heterogeneous media by considering two disorder scenarios characterized by quenched random velocities and quenched retardation properties, respectively. These mechanisms lead to different, dimension-dependent disorder samplings that give rise to dual transport processes in space and time. Specifically, transport describes correlated Lévy flights in the random velocity model and correlated CTRWs in the random retardation model., El transporte de solutos en medios heterogéneos porosos exhibe comportamientos anómalos, que se caracteriza por rasgos que no pueden ser explicados en términos de modelos tradicionales basados en la ecuación de advección-dispersión con coeficientes efectivos constantes. Las características del transporte anómalo son el crecimiento temporal no lineal de la varianza de la concentración de soluto, los perfiles de densidad no gausianos y la curvas de llegada con colas pronunciadas. Entender y predecir el comportamiento del transporte en hidrología subterránea es crucial para aplicaciones ambientales e industriales, como la gestión de aguas subterráneas o la evaluación de riesgos en repositorios de residuos nucleares. La complejidad de estas tareas se debe a la heterogeneidad intrínseca en múltiples escalas de las formaciones geológicas y del gran número de grados de libertad. Por lo tanto, una descripción predictiva del transporte requiere un proceso de upscaling basado en propiedades medibles del medio y el flujo para el que los modelos time domain random walk (TDRW) y continuous time random walk (CTRW) proporcionan un marco adecuado. En esta tesis, se identifican los mecanismos que inducen transporte anómalo y se cuantifica su impacto en el transporte. Se proponen modelos de transporte parametrizados en términos de las propiedades del medio y el flujo. Entre los mecanismos que inducen comportamientos no fickianos, la heterogeneidad del flujo, relacionada con el desorden del medio, desempeña un papel fundamental. Por lo tanto, su impacto se estudia junto con los de otros mecanismos a lo largo de toda la tesis. Primero, se considera el atrapamiento de soluto debido a heterogeneidades físicas o químicas parametrizadas en términos de un ratio de atrapamiento constante y una distribución de tiempos de retorno. Se observan tres regímenes de transporte relacionados con las escalas temporales características del atrapamiento. A tiempos pequeños, el transporte está controlado por la advección hasta que las partículas comienzan a ser atrapadas. A continuación el incremento de la distancia entre partículas móviles e inmóviles origina un régimen superdifusivo que finalmente evoluciona hacia un régimen controlado por el atrapamiento. Después, se estudia el transporte en medios correlacionados en los que el movimiento de las partículas es descrito por un CTRW acoplado parametrizado según la distribución de velocidades del flujo y de las escalas espaciales. El desorden y la correlación generan comportamientos similares en los momentos del desplazamiento de las partículas, pero diferentes en las distribución de posiciones y de tiempos de llegada. A continuación, se estudia la relación entre flujo y transporte bajo diferentes condiciones de inyección, a través de las velocidades eulerianas y lagrangianas. La estadística lagrangiana evoluciona hacia un estado estacionario que depende de los modos de inyección. Se estudia la organización de las velocidades en flujos de Darcy y se desarrolla un CTRW para el transporte que se parametriza solo en términos de las propiedades del medio y del flujo. Este CTRW considera la no estacionariedad a través de modelos de velocidad markovianos. El impacto de la heterogeneidad advectiva se estudia considerando diferentes escenarios de desorden. Finalmente, se cuantifica el impacto de la difusión en medios heterogéneos estratificados considerando dos escenarios de heterogeneidad que se caracterizan respectivamente por velocidades y propiedades de retraso aleatorias. Estos mecanismos originan diferentes muestreos del desorden que generan procesos de transportes duales en tiempo y espacio. El transporte describe un Lévy flight correlacionado en el modelo de velocidades aleatorias y un CTRW correlacionado en el modelo de retraso.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Scale dependence of the hydraulic properties of a fractured aquifer estimated using transfer functions

  • Pedretti, Daniele
  • Russian, Anna
  • Sánchez Vila, Francisco Javier
  • Dentz, Marco
This is the peer reviewed version of the following article: [Pedretti, D., A. Russian, X. Sanchez-Vila, and M. Dentz (2016), Scale dependence of the hydraulic properties of a fractured aquifer estimated using transfer functions, Water Resour. Res., 52, 5008–5024, doi:10.1002/2016WR018660. ], which has been published in final form at http://onlinelibrary.wiley.com/doi/10.1002/2016WR018660/abstract. This article may be used for non-commercial purposes in accordance with Wiley Terms and Conditions for Self-Archiving., We present an investigation of the scale dependence of hydraulic parameters in fractured media based on the concept of transfer functions (TF). TF methods provide an inexpensive way to perform aquifer parameter estimation, as they relate the fluctuations of an observation time series (hydraulic head fluctuations) to an input function (aquifer recharge) in frequency domain. Fractured media are specially sensitive to this approach as hydraulic parameters are strongly scale-dependent, involving nonstationary statistical distributions. Our study is based on an extensive data set, involving up to 130 measurement points with periodic head measurements that in some cases extend for more than 30 years. For each point, we use a single-porosity and dual-continuum TF formulation to obtain a distribution of transmissivities and storativities in both mobile and immobile domains. Single-porosity TF estimates are compared with data obtained from the interpretation of over 60 hydraulic tests (slug and pumping tests). Results show that the TF is able to estimate the scale dependence of the hydraulic parameters, and it is consistent with the behavior of estimates from traditional hydraulic tests. In addition, the TF approach seems to provide an estimation of the system variance and the extension of the ergodic behavior of the aquifer (estimated in approximately 500 m in the analyzed aquifer). The scale dependence of transmissivity seems to be independent from the adopted formulation (single or dual-continuum), while storativity is more sensitive to the presence of multiple continua., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Dissolution patterns and mixing dynamics in unstable reactive flow

  • Hidalgo, Juan J.
  • Dentz, Marco
  • Cabeza Diaz de Ceiro, Yoar
  • Carrera Ramírez, Jesús
We study the fundamental problem of mixing and chemical reactions under a Rayleigh-Taylor-type hydrodynamic instability in a miscible two-fluid system. The dense fluid mixture, which is generated at the fluid-fluid interface, leads to the onset of a convective fingering instability and triggers a fast chemical dissolution reaction. Contrary to intuition, the dissolution pattern does not map out the finger geometry. Instead, it displays a dome-like, hierarchical structure that follows the path of the ascending fluid interface and the regions of maximum mixing. These mixing and reaction hot spots coincide with the flow stagnation points, at which the interfacial mixing layer is compressed and deformed. We show that the deformation of the boundary layer around the stagnation points controls the evolution of the global scalar dissipation and reaction rates and shapes the structure of the reacted zones. The persistent compression of the mixing layer explains the independence of the mixing rate from the Rayleigh number when convection dominates., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Tracer test modeling for characterizing heterogeneity and local-sacle residence time distribution in an artificial recharge site.

  • Valhondo, Cristina
  • Martínez-Landa, Lurdes
  • Carrera, Jesús
  • Hidalgo, Juan J.
  • Tubau, Isabel
  • De Pourcq, Katrien
  • Grau Martínez, Alba
  • Ayora, Carles
Artificial recharge of aquifers is a technique for improving water quality and increasing groundwater resources. Understanding the fate of a potential contaminant requires knowledge of the residence time distribution (RTD) of the recharged water in the aquifer beneath. A simple way to obtain the RTDs is to perform a tracer test. We performed a pulse injection tracer test in an artificial recharge system through an infiltration basin to obtain the breakthrough curves, which directly yield the RTDs. The RTDs turned out to be very broad and we used a numerical model to interpret them, to characterize heterogeneity, and to extend the model to other flow conditions. The model comprised nine layers at the site scaled to emulate the layering of aquifer deposits. Two types of hypotheses were considered: homogeneous (all flow and transport parameters identical for every layer) and heterogeneous (diverse parameters for each layer). The parameters were calibrated against the head and concentration data in both model types, which were validated quite satisfactorily against 1,1,2-Trichloroethane and electrical conductivity data collected over a long period of time with highly varying flow conditions. We found that the broad RTDs can be attributed to the complex flow structure generated under the basin due to three-dimensionality and time fluctuations (the homogeneous model produced broad RTDs) and the heterogeneity of the media (the heterogeneous model yielded much better fits).We conclude that heterogeneity must be acknowledged to properly assess mixing and broad RTDs, which are required to explain the water quality improvement of artificial recharge basins.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Tracer test modeling for characterizing heterogeneity and local-scale residence time distribution in an artificial recharge site

  • Valhondo González, Cristina
  • Martínez Landa, Lourdes
  • Carrera Ramírez, Jesús
  • Hidalgo, Juan J.
  • Tubau Fernandez, Isabel
  • De Pourcq, Katrien
  • Grau Martinez, Alba
  • Ayora Ibáñez, Carlos
Artificial recharge of aquifers is a technique for improving water quality and increasing groundwater resources. Understanding the fate of a potential contaminant requires knowledge of the residence time distribution (RTD) of the recharged water in the aquifer beneath. A simple way to obtain the RTDs is to perform a tracer test. We performed a pulse injection tracer test in an artificial recharge system through an infiltration basin to obtain the breakthrough curves, which directly yield the RTDs. The RTDs turned out to be very broad and we used a numerical model to interpret them, to characterize heterogeneity, and to extend the model to other flow conditions. The model comprised nine layers at the site scaled to emulate the layering of aquifer deposits. Two types of hypotheses were considered: homogeneous (all flow and transport parameters identical for every layer) and heterogeneous (diverse parameters for each layer). The parameters were calibrated against the head and concentration data in both model types, which were validated quite satisfactorily against 1,1,2-Trichloroethane and electrical conductivity data collected over a long period of time with highly varying flow conditions. We found that the broad RTDs can be attributed to the complex flow structure generated under the basin due to three-dimensionality and time fluctuations (the homogeneous model produced broad RTDs) and the heterogeneity of the media (the heterogeneous model yielded much better fits). We conclude that heterogeneity must be acknowledged to properly assess mixing and broad RTDs, which are required to explain the water quality improvement of artificial recharge basins., Peer Reviewed, Postprint (published version)