Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 6
Encontrada(s) 1 página(s)

TECNALIA Publications
Publicación Contribución de congreso (ConferenceOutput)

Safety and Security Co-engineering and Argumentation Framework

  • Martin, H.
  • Bramberger, R.
  • Schmittner, C.
  • Ma, Z.
  • Gruber, T.
  • Ruiz, A.
  • Macher, G.
Automotive systems become increasingly complex due to their functional range and data exchange with the outside world. Until now, functional safety of such safety-critical electrical/electronic systems has been covered successfully. However, the data exchange requires interconnection across trusted boundaries of the vehicle. This leads to security issues like hacking and malicious attacks against interfaces, which could bring up new types of safety issues. Before mass-production of automotive systems, arguments supported by evidences are required regarding safety and security. Product engineering must be compliant to specific standards and must support arguments that the system is free of unreasonable risks. This paper shows a safety and security co-engineering framework, which covers standard compliant process derivation and management, and supports product specific safety and security co-analysis. Furthermore, we investigate process- and product-related argumentation and apply the approach to an automotive use case regarding safety and security.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Combined Scheduling of Time-Triggered Plans and Priority Scheduled Task Sets

  • Real Sáez, Jorge Vicente|||0000-0001-7636-6672
  • Sáez Barona, Sergio|||0000-0001-8970-6808
  • Crespo, Alfons|||0000-0002-6606-7406
[EN] Preemptive, priority-based scheduling on the one hand, and time-triggered scheduling on the other, are the two major techniques in use for development of real-time and embedded software. Both have their advantages and drawbacks with respect to the other, and are commonly adopted in mutual exclusion. In a previous paper, we proposed a software architecture that enables the combined and controlled execution of time-triggered plans and priority-scheduled tasks. The goal was to take advantage of the best of both approaches by providing deterministic, jitter-controlled execution of time-triggered tasks (e.g., control tasks), coexisting with a set of priority-scheduled tasks, with less demanding jitter requirements. In this paper, we briefly describe the approach, in which the time-triggered plan is executed at the highest priority level, controlled by scheduling decisions taken only at particular points in time, signalled by recurrent timing events. The rest of priority levels are used by a set of concurrent tasks scheduled by static or dynamic priorities. We also discuss several open issues such as schedulability analysis, use of the approach in multiprocessor architectures, usability in mixed-criticality systems and needed changes to make this approach Ravenscar compliant., This work has been partly supported by the Spanish Government’s project M2C2 (TIN2014-56158-C4-1-P-AR) and the European Commission’s project EMC2 (ARTEMIS-JU Call 2013 AIPP-5, Contract 621429).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Capítulo o parte de un libro (BookPart)

Combining Time-Triggered Plans with Priority Scheduled Task Sets

  • Real Sáez, Jorge Vicente|||0000-0001-7636-6672
  • Sáez Barona, Sergio|||0000-0001-8970-6808
  • Crespo, Alfons|||0000-0002-6606-7406
Time-triggered and concurrent priority-based scheduling are the two major approaches in use for real-time and embedded systems. Both approaches have their own advantages and drawbacks. On the one hand, priority-based systems facilitate separation of concerns between functional and timing requirements by relying on an underlying real- time operating system that takes all scheduling decisions at run time. But this is at the cost of indeterminism in the exact timing pattern of execution of activities, namely variable release jitter. On the other hand, time-triggered schedules are more intricate to design since all schedul- ing decisions must be taken beforehand in the design phase, but their advantage is determinism and more chances for minimisation of release jitter. In this paper we propose a software architecture that enables the combined and controlled execution of time-triggered plans and priority- scheduled tasks. We also describe the implementation of an Ada library supporting it. Our aim is to take advantage of the best of both ap- proaches by providing jitter-controlled execution of time-triggered tasks (e.g., control tasks), coexisting with a set of priority-scheduled tasks, with less demanding jitter requirements., This work has been partly supported by the Spanish Government’s project M2C2 (TIN2014-56158-C4-1-P-AR) and the European Commission’s project EMC2 (ARTEMIS-JU Call 2013 AIPP-5, Contract 621429).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Smooth path planning for urban autonomous driving using OpenStreetMaps

  • Artuñedo, Antonio
  • Godoy, Jorge
  • Villagrá, Jorge
Safe and human-like path planning in urban environments remain one of the most challenging problems for autonomous driving. This paper proposes a solution to plan traffic-free optimal and smooth paths using the most spread open source navigation data structure, OpenStreetMaps. To that end, a procedure to automatically transform raw OSM data into the drivable space is combined with a MINLP optimization algorithm that finds the most suitable position of intermediate waypoints to connect Bézier primitive curves. The proposed planner is validated in a real complex roundabout, for which very smooth paths are generated, even considering obstacles., This work has been partially funded by the Spanish of Economy and Competitiveness with the National Projects TCAP-AUTO (RTC-2015-3942-4) and NAVEGASE (DPI2014-53525-C3-1-R) and by the European ECSEL JU Initiative in the EMC2 Project (621429), Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Parcus: Energy-Aware and Robust Parallelization of AUTOSAR Legacy Applications

  • Kehr, Sebastian
  • Quiñones, Eduardo
  • Langen, Dominik
  • Böddeker, Bert
  • Schäfer, Günter
Embedded multicore processors are an attractive alternative to sophisticated single-core processors for the use in automobile electronic control units (ECUs), due to their expected higher performance and energy efficiency. Parallelization approaches for AUTOSAR legacy software exploit these benefits. Nevertheless, these approaches focus on extracting performance neglecting the system's worst-case sensor/actuator latency and energy consumption. This paper presents Parcus, an energy-and latency-aware parallelization technique that combines both runnable-and tasklevel parallelism. Parcus explicitly models the traversal of data from sensor to actuator through task instances, enabling to consider the latency imposed by parallelization techniques. The parallel schedule quality (PSQ) metric quantifies the success of the parallelization, for which it takes the latency and the processor frequency into account. We demonstrate the applicability of Parcus with an automotive case study. The results show that Parcus can fully utilize the processor's energy-saving potential., This research received funding from the EU FP7 no. 287519 (parMERASA), the ARTEMIS-JU no. 621429 (EMC2), and the German Federal Ministry of Education and Research., Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Parcus: Energy-Aware and Robust Parallelization of AUTOSAR Legacy Applications

  • Kehr, Sebastian
  • Quiñones, Eduardo
  • Langen, Dominik
  • Böddeker, Bert
  • Schäfer, Günter
Embedded multicore processors are an attractive alternative to sophisticated single-core processors for the use in automobile electronic control units (ECUs), due to their expected higher performance and energy efficiency. Parallelization approaches for AUTOSAR legacy software exploit these benefits. Nevertheless, these approaches focus on extracting performance neglecting the system's worst-case sensor/actuator latency and energy consumption. This paper presents Parcus, an energy-and latency-aware parallelization technique that combines both runnable-and tasklevel parallelism. Parcus explicitly models the traversal of data from sensor to actuator through task instances, enabling to consider the latency imposed by parallelization techniques. The parallel schedule quality (PSQ) metric quantifies the success of the parallelization, for which it takes the latency and the processor frequency into account. We demonstrate the applicability of Parcus with an automotive case study. The results show that Parcus can fully utilize the processor's energy-saving potential., This research received funding from the EU FP7 no. 287519 (parMERASA), the ARTEMIS-JU no. 621429 (EMC2), and the German Federal Ministry of Education and Research., Peer Reviewed, Postprint (author's final draft)