Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 9
Encontrada(s) 1 página(s)

Biblos-e Archivo. Repositorio Institucional de la UAM
Publicación Artículo científico (JournalArticle)

Noncovalent Functionalization and Charge Transfer in Antimonene

  • Abellán, Gonzalo
  • Wild, Stefan
  • Nuin, Edurne
  • Neiss, Christian
  • Miguel, David Rodriguez San
  • Segovia Cabrero, María Pilar
  • Gibaja, Carlos
  • García Michel, Enrique
  • Görling, Andreas
  • Hauke, Frank
  • Gómez Herrero, Julio
  • Hirsch, Andreas
  • Zamora Abanades, Félix Juan
  • Ares García, Pablo
Antimonene, a novel group 15 two-dimensional material, is functionalized with a tailormade perylene bisimide through strong van der Waals interactions. The functionalization process leads to a significant quenching of the perylene fluorescence, and surpasses that observed for either graphene or black phosphorus, thus allowing straightforward characterization of the flakes by scanning Raman microscopy. Furthermore, scanning photoelectron microscopy studies and theoretical calculations reveal a remarkable charge-transfer behavior, being twice that of black phosphorus. Moreover, the excellent stability under environmental conditions of pristine antimonene has been tackled, thus pointing towards the spontaneous formation of a sub-nanometric oxide passivation layer. DFT calculations revealed that the noncovalent functionalization of antimonene results in a charge-transfer band gap of 1.1 eV, We thank the ESCA microscopy beamline team at Elettra for technical assistance with the scanning X‐ray photoelectron microscopy measurements. The research leading to these results has received partial funding from the European Union Seventh Framework Programme under grant agreement no. 604391 Graphene Flagship. We thank the Deutsche Forschungsgemeinschaft (DFG‐SFB 953 “Synthetic Carbon Allotropes”, Projects A1 and C2), the Interdisciplinary Center for Molecular Materials (ICMM), and the Graduate School Molecular Science (GSMS) for financial support. We thank the MINECO (Spain) for financial support through the “María de Maeztu” Programme for Units of Excellence in R&D (MDM‐2014‐0377) and the projects: MAT2016‐77608‐C3‐1P and 3P, as well as MAT2014‐52477‐C5‐5 and MAT2015‐66888‐C3‐3‐R. Co‐funding from UE is also acknowledged. G.A. thanks the EU for a Marie Curie Fellowship (FP7/2013‐IEF‐627386), and the FAU for the Emerging Talents Initiative (ETI) grant #WS16‐17_Nat_04
Biblos-e Archivo. Repositorio Institucional de la UAM
Publicación Artículo científico (JournalArticle)

Self-assembly of 1D/2D hybrid nanostructures consisting of a Cd(II) coordination polymer and NiAl-layered double hydroxides

  • Abellán, Gonzalo
  • Amo Ochoa, María Pilar
  • Fierro, J.G.
  • Ribera, Antonio
  • Coronado, E.
  • Zamora Abanades, Félix Juan
The preparation and characterization of a novel hybrid material based on the combination of a 2D-layered double hydroxide (LDH) nanosheets and a 1D-coordination polymer (1D-CP) has been achieved through a simple mixture of suspensions of both building blocks via an exfoliation/restacking approach. The hybrid material has been thoroughly characterized demonstrating that the 1D-CP moieties are intercalated as well as adsorbed on the surface of the LDH, giving rise to a layered assembly with the coexistence of the functionalities of their initial constituents. This hybrid represents the first example of the assembly of 1D/2D nanomaterials combining LDH with CP and opens the door for a plethora of different functional hybrid systems, Financial support from the EU (FET-OPEN 2D-INK. Grant agreement 648786), the Spanish MINECO (Projects MAT2011-22785, MAT2013-46753-C2-1-P, MAT2013-46502-C2-2-P and CTQ-2011-26507), and the Generalitat Valenciana (Prometeo Program and ISIC-Nano) is gratefully acknowledged. Gonzalo Abellán thanks the EU for a Marie Curie Fellowship (FP7/2013-IEF-627386).
Biblos-e Archivo. Repositorio Institucional de la UAM
Publicación Artículo científico (JournalArticle)

Stimuli-responsive hybrid materials: Breathing in magnetic layered double hydroxides induced by a thermoresponsive molecule

  • Abellán, Gonzalo
  • Jordá, Jose Luis
  • Atienzar, Pedro
  • Varela, María
  • Jaafar Ruiz-Castellanos, Miriam
  • Gómez Herrero, Julio
  • Zamora Abanades, Félix Juan
  • Ribera, Antonio
  • García, Hermenegildo
  • Coronado, Eugenio
A hybrid magnetic multilayer material of micrometric size, with highly crystalline hexagonal crystals consisting of CoAl-LDH ferromagnetic layers intercalated with thermoresponsive 4-(4-anilinophenylazo)benzenesulfonate (AO5) molecules diluted (ratio 9:1) with a flexible sodium dodecylsulphate (SDS) surfactant has been obtained. The resulting material exhibits thermochromism attributable to the isomerization between the azo (prevalent at room temperature) and the hydrazone (favoured at higher temperatures) tautomers, leading to a thermomechanical response. In fact, these crystals exhibited thermally induced motion triggering remarkable changes in the crystal morphology and volume. In situ variable temperature XRD of these thin hybrids shows that the reversible change into the two tautomers is reflected in a shift of the position of the diffraction peaks at high temperatures towards lower interlayer spacing for the hydrazone form, as well as a broadening of the peaks reflecting lower crystallinity and ordering due to non-uniform spacing between the layers. These structural variations between room temperature (basal spacing (BS) = 25.91 Å) and 100 °C (BS = 25.05 Å) are also reflected in the magnetic properties of the layered double hydroxide (LDH) due to the variation of the magnetic coupling between the layers. Overall, our study constitutes one of the few examples showing fully reversible thermo-responsive breathing in a 2D hybrid material. In addition, the magnetic response of the hybrid can be modulated due to the thermotropism of the organic component that, by influencing the distance and in-plane correlation of the inorganic LDH, modulates the magnetism of the CoAl-LDH sheets in a certain range, Financial support from the EU (SpinMol Advanced Grant ERC- 2009-AdG-20090325 and ERC Starting Investigator Award STEMOX# 239739), the Spanish Ministerio de Economía y Competitividad (Projects with FEDER cofinancing MAT2011-22785, MAT2012-38567-C02-01, MAT2013-46753-C2, CTQ-2011-26507, Consolider-Ingenio 2010-Multicat CSD2009-00050, and Severo Ochoa Program SEV-2012-0267), Generalitat Valenciana (PROMETEO and ISIC-Nano programs), and VLC/Campus Microcluster “Functional Nanomaterials and Nanodevices” is gratefully acknowledged. This work was sponsored by US Department of Energy, Office of Science, Basic Energy Sciences, Materials Sciences and Engineering Division (M.V.). G. A. thanks the EU for a Marie Curie Fellowship (FP7/2013-IEF- 627386). P. A. thanks the Spanish MINECO for a Ramón y Cajal Fellowship. We also acknowledge J. A. Carrasco for his help with the experimental work, and J. M. Martínez and G. Agustí for magnetic measurements
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Stimuli-responsive hybrid materials: breathing in magnetic layered double hydroxides induced by a thermoresponsive molecule

  • Abellán Sáez, Gonzalo
  • Varela , Maria
  • Jaafar, Miriam
  • Gomez-Herrero, Julio
  • Zamora, Felix
  • Ribera, Antonio
  • Coronado, Eugenio
  • Jorda Moret, Jose Luis|||0000-0002-0304-5680
  • Atienzar Corvillo, Pedro Enrique|||0000-0002-0356-021X
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
[EN] A hybrid magnetic multilayer material of micrometric size, with highly crystalline hexagonal crystals consisting of CoAl-LDH ferromagnetic layers intercalated with thermoresponsive 4-(4-anilinophenylazo)benzenesulfonate (AO5) molecules diluted (ratio 9 : 1) with a flexible sodium dodecylsulphate (SDS) surfactant has been obtained. The resulting material exhibits thermochromism attributable to the isomerization between the azo (prevalent at room temperature) and the hydrazone (favoured at higher temperatures) tautomers, leading to a thermomechanical response. In fact, these crystals exhibited thermally induced motion triggering remarkable changes in the crystal morphology and volume. In situ variable temperature XRD of these thin hybrids shows that the reversible change into the two tautomers is reflected in a shift of the position of the diffraction peaks at high temperatures towards lower interlayer spacing for the hydrazone form, as well as a broadening of the peaks reflecting lower crystallinity and ordering due to non-uniform spacing between the layers. These structural variations between room temperature (basal spacing (BS) = 25.91 angstrom) and 100 degrees C (BS = 25.05 angstrom) are also reflected in the magnetic properties of the layered double hydroxide (LDH) due to the variation of the magnetic coupling between the layers. Overall, our study constitutes one of the few examples showing fully reversible thermo-responsive breathing in a 2D hybrid material. In addition, the magnetic response of the hybrid can be modulated due to the thermotropism of the organic component that, by influencing the distance and in-plane correlation of the inorganic LDH, modulates the magnetism of the CoAl-LDH sheets in a certain range., Financial support from the EU (SpinMol Advanced Grant ERC-2009-AdG-20090325 and ERC Starting Investigator Award STEMOX#239739), the Spanish Ministerio de Economia y Competitividad (Projects with FEDER cofinancing MAT2011-22785, MAT2012-38567-C02-01, MAT2013-46753-C2, CTQ-2011-26507, Consolider-Ingenio 2010-Multicat CSD2009-00050, and Severo Ochoa Program SEV-2012-0267), Generalitat Valenciana (PROMETEO and ISIC-Nano programs), and VLC/Campus Microcluster "Functional Nanomaterials and Nanodevices" is gratefully acknowledged. This work was sponsored by US Department of Energy, Office of Science, Basic Energy Sciences, Materials Sciences and Engineering Division (M.V.). G. A. thanks the EU for a Marie Curie Fellowship (FP7/2013-IEF-627386). P. A. thanks the Spanish MINECO for a Ramon y Cajal Fellowship. We also acknowledge J. A. Carrasco for his help with the experimental work, and J. M. Martinez and G. Agusti for magnetic measurements.
Repositorio Institucional del Instituto Madrileño de Estudios Avanzados en Nanociencia
Publicación Artículo científico (JournalArticle)

Self-assembly of 1D/2D hybrid nanostructures consisting of a Cd(II) coordination polymer and NiAl-layered double hydroxides

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Self-assembly of 1D/2D hybrid nanostructures consisting of a Cd(II) coordination polymer and NiAl-layered double hydroxides

  • Abellán, Gonzalo
  • Amo-Ochoa, Pilar
  • García Fierro, José Luis
  • Ribera, Antonio
  • Coronado, Eugenio
  • Zamora, Félix
The preparation and characterization of a novel hybrid material based on the combination of a 2D-layered double hydroxide (LDH) nanosheets and a 1D-coordination polymer (1D-CP) has been achieved through a simple mixture of suspensions of both building blocks via an exfoliation/restacking approach. The hybrid material has been thoroughly characterized demonstrating that the 1D-CP moieties are intercalated as well as adsorbed on the surface of the LDH, giving rise to a layered assembly with the coexistence of the functionalities of their initial constituents. This hybrid represents the first example of the assembly of 1D/2D nanomaterials combining LDH with CP and opens the door for a plethora of different functional hybrid systems., Financial support from the EU (FET-OPEN 2D-INK. Grant agreement 648786), the Spanish MINECO (Projects MAT2011-22785, MAT2013-46753-C2-1-P, MAT2013-46502-C2-2-P and CTQ-2011-26507), and the Generalitat Valenciana (Prometeo Program and ISIC-Nano) is gratefully acknowledged. Gonzalo Abellán thanks the EU for a Marie Curie Fellowship (FP7/2013-IEF-627386). We acknowledge support by the CSIC Open Access Publication Initiative through its Unit of Information Resources for Research (URICI)., We acknowledge support by the CSIC Open Access Publication Initiative through its Unit of Information Resources for Research (URICI)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Layered gadolinium hydroxides for low-temperature magnetic cooling

  • Abellán, Gonzalo
  • Mínguez Espallargas, Guillermo
  • Lorusso, Giulia
  • Evangelisti, Marco
  • Coronado, Eugenio
Layered gadolinium hydroxides have revealed to be excellent candidates for cryogenic magnetic refrigeration. These materials behave as pure 2D magnetic systems with a Heisenberg-Ising critical crossover, induced by dipolar interactions. This 2D character and the possibility offered by these materials to be delaminated open the possibility of rapid heat dissipation upon substrate deposition., We are grateful to the EU (ERC Advanced Grant SPINMOL), the Spanish MINECO (Projects MAT-2014-56143-R, CTQ-2014-59209-P and FEDER-MAT2012-38318-C03-01), and the Generalitat Valenciana (Prometeo Program and ISIC-Nano). Support from INNCIDE program through Vicerectorat d’lnvestigacio i Política Científica of the University of Valencia is also acknowledged. G. A. thanks the EU for a Marie Curie Fellowship (FP7/2013-IEF-627386). G.M.E. thanks the Spanish MINECO for a Ramón y Cajal Fellowship., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Electrical conductivity and strong luminescence in copper Iodide double chains with isonicotinato derivatives

  • Hassanein, K.
  • Conesa-Egea, Javier
  • Delgado, S.
  • Castillo, Óscar
  • Benmansour, S.
  • Martínez, José I.
  • Abellán, G.
  • Gómez-García, Carlos J.
  • Zamora, F.
  • Amo-Ochoa, Pilar
Direct reactions between CuI and isonicotinic acid (HIN) or the corresponding esters, ethyl isonicotinate (EtIN) or methyl isonicotinate (MeIN), give rise to the formation of the coordination polymers [CuI(L)] with L=EtIN (1), MeIN (2) and HIN (3). Polymers 1-3 show similar structures based on a CuI double chain in which ethyl-, methyl isonicotinate or isonicotinic acid are coordinated as terminal ligands. Albeit, their supramolecular architecture differs considerably, affecting the distances and angles of the central CuI double chains and thereby their physical properties. Hence, the photoluminescence shows remarkable differences; 1 and 2 show a strong yellow emission, whereas 3 displays a weak emission; and 1 and 2 are semiconductors with moderate room temperature conductivities, whereas 3 has increased electrical conductivity up to 3×10 S cm. Additionally, 1 and 2 present an irreversible transition to a highly conducting phase with a conductivity almost 4 orders of magnitude higher and a quasi-metallic behaviour. Thermogravimetric analysis (TGA) coupled to a mass spectrometer and magnetic measurements point to a partial thermally induced oxidation of the carboxylate groups of the ligands with Cu to Cu reduction. DFT calculations have been carried out to rationalise these observations., Financial support from Spanish MINECO (CTQ2011‐26507, MAT2013‐46753‐C2‐1‐P and MAT2013‐46502‐C2‐1 y 2‐P), Eusko Jaurlaritza/Gobierno Vasco (IT477‐10) and Generalitat Valenciana (Projects PrometeoII/2014/076 and ISIC) is gratefully acknowledged. G.A. thanks the EU for a Marie Curie Fellowship (FP7/2013‐IEF‐627386) and Dr. F. Hauke and Prof. We also thank the scientific computing centre (CCC) of the Autónoma University of Madrid for their time. J.I.M. acknowledges funding from the CSIC‐JAEDOC Fellowship Program, co‐funded by the European Social Fund.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Layered gadolinium hydroxides for low-temperature magnetic cooling

  • Abellán, G.
  • Espallargas, G.M.
  • Lorusso, G.
  • Evangelisti, M.
  • Coronado, E.
Layered gadolinium hydroxides have revealed to be excellent candidates for cryogenic magnetic refrigeration. These materials behave as pure 2D magnetic systems with a Heisenberg-Ising critical crossover, induced by dipolar interactions. This 2D character and the possibility offered by these materials to be delaminated open the possibility of rapid heat dissipation upon substrate deposition.