Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 4
Encontrada(s) 1 página(s)

Addi. Archivo Digital para la Docencia y la Investigación
Publicación Artículo científico (JournalArticle)

One-Pot Synthesis of Waterborne Polymeric Dispersions Stabilized with Alkali-Soluble Resins

  • Bandiera, Massimo
  • Balk, Roelof
  • Barandiaran Sarasola, María Jesús
Alkali-soluble resins (ASRs) are a type of electrosteric emulsifiers of high interest because they can profitably improve the features of waterborne dispersions. In this work, they have been synthesized in-situ through a one-pot approach and they have been used as polymeric surfactants for a second emulsion polymerization step in the same reactor. This strategy provides some advantages compared to other polymerization techniques, like the intensification of the process and the absence of organic solvents. Their use can also further reduce the environmental impact of formulations for film-forming applications, since grafting reactions with the particles have been observed and quantified in relation with the synthetic parameters. These chemical linkages with the particles may reduce the leaching and the release of surfactants from polymeric films, for example in water-based coatings or adhesives. The systems have been also studied from the kinetics point of view, finding relevant differences with other electrosterically stabilized processes from the literature, as well as concerns the nucleation mechanism., The European Union's Horizon 2020 research and innovation programme is acknowledged for providing the financial support through the project TRACKWAY-ITN 642514 under the Marie Sklodowska-Curie grant agreement.
Addi. Archivo Digital para la Docencia y la Investigación
Publicación Artículo científico (JournalArticle)

Mechanical and Morphological Properties of Waterborne ABA Hard-Soft-Hard Block Copolymers Synthesized by Means of RAFT Miniemulsion Polymerization

  • Siljanovska Petreska, Gordana
  • Arbe Méndez, María Aranzazu
  • Auschra, Clemens
  • Paulis Lumbreras, María
High molecular weight waterborne ABA block copolymers of styrene (St) and 2-ethylhexyl acrylate (2EHA) containing hard and soft domains were synthesized by means of RAFT (mini)emulsion polymerization using a bifunctional symmetric S,S-dibenzyl trithiocarbonate (DBTTC) RAFT agent. Miniemulsion polymerization was initially used for the synthesis of the A-block, which forms hard domains, followed by 2EHA pre-emulsion feeding to build the B-block soft domains. Polymerization kinetics and the evolution of the Molecular Weight Distribution (MWD) were followed during the synthesis of different ABA block copolymers. The thermal properties of the final symmetric block copolymers were studied on dried films by means of DSC. It was found that the block copolymers have two glass transitions, which indicates the presence of a two-phase system. Phase separation was investigated by means of microscopic techniques (AFM and TEM) and SAXS, both of the particles in the latex form, as well as after film formation at room temperature and after different post-treatments. Films were annealed at temperatures well above the glass transition temperature (T-g) of the hard phase to study the bulk morphology of the films after complete particle coalescence. Moreover, for comparison purposes, the films were re-dissolved in THF, and films were again cast directly from the homogeneous THF solutions. As THF is a good solvent for both blocks, such films serve as a reference for the equilibrium morphology. Finally, DMTA studies of the films annealed at different temperatures were performed to correlate the morphology changes with the mechanical properties of the block, The European Union's Horizon 2020 research and innovation programme is acknowledged for providing the financial support through the project TRACKWAY-ITN 642514 under the Marie Sklodowska-Curie grant agreement. Authors are thankful to Ute Heinemer (SEM and TEM lab BASF) for the TEM measurements and discussions and Katja Graf (AFM lab BASF) for the discussion of the AFM images. A.A. acknowledges financial support of the Basque Government, code: IT-1175-19 and the Ministerio de Economia y Competitividad code: PGC2018-094548-B-I00 (MINECO/FEDER, UE).
Addi. Archivo Digital para la Docencia y la Investigación
Publicación Artículo científico (JournalArticle)

Design of Waterborne Asymmetric Block Copolymers as Thermoresponsive Materials

  • Siljanovska Petreska, Gordana
  • Van Sluijs, Christof
  • Auschra, Clemens
  • Paulis Lumbreras, María
AB diblock waterborne copolymers made of styrene (St) and 2-ethylhexyl acrylate (2EHA) were synthesized by means of two-step reversible addition fragmentation chain transfer (RAFT) (mini)emulsion polymerization. Monofunctional asymmetric RAFT agent was used to initiate the polymerization. The hard polystyrene “A” block was synthesized via miniemulsion polymerization followed by 2EHA pre-emulsion feeding to form the soft “B” block. Polymerization kinetics and the evolution of the molecular weight distribution were followed during synthesis of both initial and final block copolymers. DSC measurements of the block copolymers revealed the existence of two glass transition temperatures (Tgs) and thus the occurrence of two-phase systems. Microscopic techniques (atomic force microscopy (AFM) and transmission electron microscopy (TEM)) were used to study the phase separation within the particles in the latex form, after film formation at room temperature cast directly from the latex and after different post-treatments well above the Tg of the hard-polystyrene domains, when complete particle coalescence had occurred. The morphological differences observed after different annealing temperatures were correlated with the mechanical properties analyzed by DMTA measurements. Finally, the differences found in the mechanical properties of the block copolymers annealed at different temperatures were correlated to their heat seal application results., The European Union’s Horizon 2020 research and innovation programme is acknowledged for providing the financial support through the project TRACKWAY-ITN 642514 under the Marie Sklodowska-Curie grant agreement.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Mechanical and morphological properties of waterborne ABA hard-soft-hard block copolymers synthesized by means of RAFT miniemulsion polymerization

  • Petreska, G. S.
  • Arbe, Arantxa
  • Auschra, Clemens
  • Paulis, Maria
High molecular weight waterborne ABA block copolymers of styrene (St) and 2-ethylhexyl acrylate (2EHA) containing hard and soft domains were synthesized by means of RAFT (mini)emulsion polymerization using a bifunctional symmetric S,S-dibenzyl trithiocarbonate (DBTTC) RAFT agent. Miniemulsion polymerization was initially used for the synthesis of the A-block, which forms hard domains, followed by 2EHA pre-emulsion feeding to build the B-block soft domains. Polymerization kinetics and the evolution of the MolecularWeight Distribution (MWD) were followed during the synthesis of different ABA block copolymers. The thermal properties of the final symmetric block copolymers were studied on dried films by means of DSC. It was found that the block copolymers have two glass transitions, which indicates the presence of a two-phase system. Phase separation was investigated by means of microscopic techniques (AFM and TEM) and SAXS, both of the particles in the latex form, as well as after film formation at room temperature and after different post-treatments. Films were annealed at temperatures well above the glass transition temperature (T) of the hard phase to study the bulk morphology of the films after complete particle coalescence. Moreover, for comparison purposes, the films were re-dissolved in THF, and films were again cast directly from the homogeneous THF solutions. As THF is a good solvent for both blocks, such films serve as a reference for the equilibrium morphology. Finally, DMTA studies of the films annealed at different temperatures were performed to correlate the morphology changes with the mechanical properties of the block copolymers., The European Union’s Horizon 2020 research and innovation programme is acknowledged for providing the financial support through the project TRACKWAY-ITN 642514 under the Marie Sklodowska-Curie grant agreement. Authors are thankful to Ute Heinemer (SEM and TEM lab BASF) for the TEM measurements and discussions and Katja Graf (AFM lab BASF) for the discussion of the AFM images. A.A. acknowledges financial support of the Basque Government, code: IT-1175-19 and the Ministerio de Economia y Competitividad code: PGC2018-094548-B-I00 (MINECO/FEDER, UE)