Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 7
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Intelligent Multimodal Framework for Human Assistive Robotics Based on Computer Vision Algorithms

  • Ivorra, Eugenio|||0000-0001-6062-2061
  • Alcañiz Raya, Mariano Luis|||0000-0001-9207-0636
  • Ortega Pérez, Mario
  • Catalán, José M.
  • Ezquerro, Santiago
  • Lledó, Luis Daniel
  • Garcia-Aracil, Nicolás
[EN] Assistive technologies help all persons with disabilities to improve their accessibility in all aspects of their life. The AIDE European project contributes to the improvement of current assistive technologies by developing and testing a modular and adaptive multimodal interface customizable to the individual needs of people with disabilities. This paper describes the computer vision algorithms part of the multimodal interface developed inside the AIDE European project. The main contribution of this computer vision part is the integration with the robotic system and with the other sensory systems (electrooculography (EOG) and electroencephalography (EEG)). The technical achievements solved herein are the algorithm for the selection of objects using the gaze, and especially the state-of-the-art algorithm for the efficient detection and pose estimation of textureless objects. These algorithms were tested in real conditions, and were thoroughly evaluated both qualitatively and quantitatively. The experimental results of the object selection algorithm were excellent (object selection over 90%) in less than 12 s. The detection and pose estimation algorithms evaluated using the LINEMOD database were similar to the state-of-the-art method, and were the most computationally efficient., The research leading to these results received funding from the European Community's Horizon 2020 programme, AIDE project: "Adaptive Multimodal Interfaces to Assist Disabled People in Daily Activities" (grant agreement No: 645322).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Hybrid brain/neural interface and autonomous vision-guided whole-arm exoskeleton control to perform activities of daily living (ADLs)

  • Catalán, José M.
  • Trigili,Emilio
  • Nann, Marius
  • Blanco-Ivorra, Andrea
  • Lauretti, Clemente
  • Cordella, Francesca
  • Elaine Armstrong
  • Crea, Simona
  • Zollo, Loredana
  • Soekadar, Surjo R.
  • Vitiello, Nicola
  • Garcia-Aracil, Nicolás
  • Ivorra, Eugenio|||0000-0001-6062-2061
  • Alcañiz Raya, Mariano Luis|||0000-0001-9207-0636
[EN] Background The aging of the population and the progressive increase of life expectancy in developed countries is leading to a high incidence of age-related cerebrovascular diseases, which affect people's motor and cognitive capabilities and might result in the loss of arm and hand functions. Such conditions have a detrimental impact on people's quality of life. Assistive robots have been developed to help people with motor or cognitive disabilities to perform activities of daily living (ADLs) independently. Most of the robotic systems for assisting on ADLs proposed in the state of the art are mainly external manipulators and exoskeletal devices. The main objective of this study is to compare the performance of an hybrid EEG/EOG interface to perform ADLs when the user is controlling an exoskeleton rather than using an external manipulator. Methods Ten impaired participants (5 males and 5 females, mean age 52 +/- 16 years) were instructed to use both systems to perform a drinking task and a pouring task comprising multiple subtasks. For each device, two modes of operation were studied: synchronous mode (the user received a visual cue indicating the sub-tasks to be performed at each time) and asynchronous mode (the user started and finished each of the sub-tasks independently). Fluent control was assumed when the time for successful initializations ranged below 3 s and a reliable control in case it remained below 5 s. NASA-TLX questionnaire was used to evaluate the task workload. For the trials involving the use of the exoskeleton, a custom Likert-Scale questionnaire was used to evaluate the user's experience in terms of perceived comfort, safety, and reliability. Results All participants were able to control both systems fluently and reliably. However, results suggest better performances of the exoskeleton over the external manipulator (75% successful initializations remain below 3 s in case of the exoskeleton and bellow 5s in case of the external manipulator). Conclusions Although the results of our study in terms of fluency and reliability of EEG control suggest better performances of the exoskeleton over the external manipulator, such results cannot be considered conclusive, due to the heterogeneity of the population under test and the relatively limited number of participants., This study was funded by the European Commission under the project AIDE (G.A. no: 645322), Spanish Ministry of Science and Innovation, through the projects PID2019-108310RB-I00 and PLEC2022-009424 and by the Ministry of Universities and European Union, "fnanced by European Union-Next Generation EU" through Margarita Salas grant for the training of young doctors.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

A Modular Mobile Robotic Platform to Assist People with Different Degrees of Disability

  • Catalán, José M.
  • Blanco, Andrea
  • Bertomeu-Motos, Arturo
  • García-Pérez, José V.
  • Almonacid, Miguel
  • Puerto, Rafael
  • García Aracil, Nicolás Manuel
Robotics to support elderly people in living independently and to assist disabled people in carrying out the activities of daily living independently have demonstrated good results. Basically, there are two approaches: one of them is based on mobile robot assistants, such as Care-O-bot, PR2, and Tiago, among others; the other one is the use of an external robotic arm or a robotic exoskeleton fixed or mounted on a wheelchair. In this paper, a modular mobile robotic platform to assist moderately and severely impaired people based on an upper limb robotic exoskeleton mounted on a robotized wheel chair is presented. This mobile robotic platform can be customized for each user’s needs by exploiting its modularity. Finally, experimental results in a simulated home environment with a living room and a kitchen area, in order to simulate the interaction of the user with different elements of a home, are presented. In this experiment, a subject suffering from multiple sclerosis performed different activities of daily living (ADLs) using the platform in front of a group of clinicians composed of nurses, doctors, and occupational therapists. After that, the subject and the clinicians replied to a usability questionnaire. The results were quite good, but two key factors arose that need to be improved: the complexity and the cumbersome aspect of the platform.
RUC. Repositorio da Universidade da Coruña
Publicación Contribución de congreso (ConferenceOutput)

Diseño de un sensor óptico de fuerza para exoesqueleto de mano

  • Díez Pomares, Jorge
  • Blanco Ivorra, Andrea
  • Catalán Orts, José María
  • Badesa, Francisco Javier
  • Sabater-Navarro, J. M.
  • García-Aracil, Nicolás
[Resumen] En este trabajo se presenta el diseño preliminar de un sensor de fuerza integrable en un dispositivo de rehabilitación y asistencia de la mano de tipo exoesqueleto. Como alternativa a las tradicionales células de carga, cuya miniaturización es económicamente costosa, se plantea el uso de un sistema óptico similar a los utilizados en micrometría. Para ello se diseña un tren de elementos ópticos que es sensible a pequeñas deformaciones del elementos estructural que los soporta, traduciendo desviaciones del orden de décimas de milímetro en variaciones milimétricas de la proyección de un haz de luz. En este artículo se plantea la integración del sensor en un exoesqueleto de mano, se detalla el modelado del sistema óptico utilizado para el dimensionamiento de los elementos y finalmente se exponen los resultados de las pruebas de concepto realizadas con un primer prototipo., Ministerio de Economía y Competitividad; DPI2015-70415-C2-2-R, Generalitat Valenciana.Conselleria d'Educació, Cultura i Esport; ACIF 2016/216 Generalitat, Generalitat Valenciana.Conselleria d'Educació, Cultura i Esport; APOTIP 2016/021
RUC. Repositorio da Universidade da Coruña
Publicación Contribución de congreso (ConferenceOutput)

Control de entorno virtual mediante interfaz híbrido BCI usando señales EOG/EEG durante imaginería motora, Virtual environment control throught BCI-hybrid interface using EOG/EEG signals during motor imagery

  • Ezquerro, Santiago
  • Bertomeu-Motos, Arturo
  • Barios, Juan Antonio
  • Lledó Pérez, Luis Daniel
  • Catalá Orts, José M.
  • García-Aracil, Nicolás
[Resumen] La discapacidad producida por las enfermedades neurológicas es uno de los primeros problemas de salud y calidad de vida en las sociedades avanzadas. Las tecnologías asistenciales han demostrado poder aumentar la independencia de los pacientes y mejorar su capacidad de controlar su entorno. Los sistemas híbridos interfaces cerebro-computadora (BCI), que utilizan una fusión de señales no invasivas basadas en EOG y EEG, son sistemas prometedores para el desarrollo de este tipo de aplicaciones. En este estudio participaron ocho sujetos con patología neurológica (accidente cerebro-vascular, lesión medular o enfermedad neurodegenerativa). Los pacientes a través de BCIEEG y EOG navegaban por el entorno virtual realizando diferentes actividades de la vida diaria (AVD). El objetivo principal de esta experimentación fue evaluar el rendimiento de un grupo de sujetos con discapacidad física severa para la ejecución de un conjunto de tareas implementadas en un entorno de navegación virtual, utilizando un interfaz de control mediante BCI híbrido (EOG y EEG basado en imaginería motora)., [Abstract] Dissabilities produced by neurological diseases are the first problem of health and life quality in this society. Assistance technology has demostrated increase the patient's independence and improve the capability to facilitate their environmental control. BCI hybrid systems that use a signal non-invasive fusion based in EOG and EEG are promising systems. In this study eight subjects with neurological pathology (stroke, spinal cord injury or neurodegenerative disease) were participed. The patients navegated along the virtual environment through EEG and EOG performed several ADLs. The main aim of this experimentation was evaluated the subject's performance with several physic disability for the execution of tasks implemented in a virtual environment using a control interface throught BCI-hybrid system (EOG and EEG based in motor imagery).
RUC. Repositorio da Universidade da Coruña
Publicación Contribución de congreso (ConferenceOutput)

Sistema robótico multimodal de miembro superior para interacción con entornos físicos

  • Díez Pomares, Jorge
  • Blanco Ivorra, Andrea
  • Lledó Pérez, Luis Daniel
  • Catalán Orts, José María
  • Badesa, Francisco Javier
  • García-Aracil, Nicolás
[Resumen] Este artículo describe el diseño de un sistema robótico multimodal enfocado a proporcionar a personas con movilidad reducida, la capacidades de interaccionar con objetos reales. Con este sistema se pretende cubrir todo el proceso de interacción, desde la selección del objeto con el que se quiere interactuar, pasando por alcanzar y agarrarlo, hasta volver a dejar el objeto. El sistema se compone de un robot diseñado para rehabilitación de miembro superior, de un exoesqueleto de mano, un sistema de seguimiento de mirada, un dispositivo de seguimiento de objetos, y un sistema de detección de intención de movimiento. Con este propósito, en este artículo se presenta la arquitectura del sistema, especificando los elementos particulares que serán utilizados en un escenario experimental para comprobar la viabilidad del sistema., Este trabajo ha sido financiado por la Comisión Europea (ICT-22-2014: Multimodal and Natural computer interaction) a través del proyecto AIDE: ”Adaptive Multimodal Interfaces to Assist Disabled People in Daily Activities” (Grant agreement no: 645322); y por el Ministerio de Economía y Competitividad a través del proyecto DPI2015-70415-C2-2-R, https://doi.org/10.17979/spudc.9788497498081
RUC. Repositorio da Universidade da Coruña
Publicación Contribución de congreso (ConferenceOutput)

Efectos sobre la ERD en tareas de control de exoesqueleto de mano empleando BCI

  • Ezquerro, Santiago
  • Barios, Juan Antonio
  • Bertomeu-Motos, Arturo
  • Lorente, Luisa
  • Requena, Nuria
  • Delegido, Irene
  • Badesa, Francisco Javier
  • García-Aracil, Nicolás
[Resumen] Los estudios con interfaces cerebro-máquina basados en electroencefalografía (EEG) en el campo de la rehabilitación y ayuda a personas con movilidad reducida, típicamente basados la modulación de los ritmos sensoriomotores (SMR), han aumentado notablemente en estos últimos diez años. Unidos a la aparición de nuevas herramientas en rehabilitación, como son los exoesqueletos, prometen ser una poderosa alternativa terapéutica y rehabilitadora para la recuperación motora de las lesiones distales de los miembros superiores. Diez sujetos sanos han participado en este estudio, en el cual se cuantificó en tiempo real las modulaciones de los ritmos SMR en la banda alpha (8-12 Hz) durante una actividad de de imaginería motora (IM) (cierre de mano/relax) utilizando diferentes modalidades sensoriales como feedback: propioceptivo (utilizando un exoesqueleto de mano), auditivo y visual. Los resultados obtenidos muestran una incremento en la intensidad y la duración de la desincronizaci on (ERD) en la banda alpha durante la IM utilizando el exoesqueleto., Ministerio de Economía y Competitividad; DPI2015-70415-C2-2-R